Search NASA⌕ Search

SEARCH · Search NASA

Results for “bandwidth estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Flux and Reaction Rate Kernel Density Estimators in OpenMC

Current methods for obtaining flux and reaction rate profiles in a Monte Carlo simulation rely on histogram tallies that can suffer from large uncertainties when fine detail is required. Recently, another density estimation technique has been applied to Monte Carlo radiation transport sim ulations: the Kernel Density Estimator (KDE) [Banerjee, K.]. KDEs are capable of calculating the flux at a point without the necessity of tracking particles on a spatial mesh, making KDEs ideal tools for multi-physics problems. Furthermore, KDEs allow for one collision or track length to contribute to the estimate of the flux at multiple points, circumventing the large statistical uncertainties associated with fine-mesh histogram tallies. However, KDEs have only been proven to be capable of estimating flux values at a series of points; no work has been done to estimate reaction rates or other quantities of interest. Furthermore, little work has been done in optimizing the KDE bandwidth for the energy-dependence of neutron transport simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An ATP System for Deep-Space Optical Communication

An acquisition, tracking, and pointing (ATP) system is proposed for aiming an optical-communications downlink laser beam from deep space. In providing for a direction reference, the concept exploits the mature technology of star trackers to eliminate the need for a costly and potentially hazardous laser beacon. The system would include one optical and two inertial sensors, each contributing primarily to a different portion of the frequency spectrum of the pointing signal: a star tracker (<10 Hz), a gyroscope (<50 Hz), and a precise fluid-rotor inertial angular-displacement sensor (sometimes called, simply, "angle sensor") for the frequency range >50 Hz. The outputs of these sensors would be combined in an iterative averaging process to obtain high-bandwidth, high-accuracy pointing knowledge. The accuracy of pointing knowledge obtainable by use of the system was estimated on the basis of an 8-cm-diameter telescope and known parameters of commercially available star trackers and inertial sensors: The single-axis pointing-knowledge error was found to be characterized by a standard deviation of 150 nanoradians - below the maximum value (between 200 and 300 nanoradians) likely to be tolerable in deep-space optical communications.

Lee, Shinhak↗

The StarLight interferometer architecture and operational concepts

The StarLight flight project was designed to demonstrate the key technologies of spacebome long-baseline stellar interferometry and precision formation flying for potential use on the Terrestrial Planet Finder (TPF) and other future astrophysics missions. Interferometer performance validation could be achieved over a 6-12 month period by obtaining several hundred fringe visibility amplitude measurements for stars in the band 600-1000 nm for a variety of stellar visibilities (0.2-1.0), magnitudes (Mv = 2-5), and baselines (B = 30-125 meters). Interferometry could be performed both in a 1 meter fixed-baseline combiner-only mode and in a two-spacecraft formation mode. In formation mode, the combiner spacecraft would remain at the focus of a virtual parabola, while the collector spacecraft assumed various positions along the parabola such that the two arms of the interferometer remained equal over a variety of separations and bearing angles. Challenges to be encountered in flight include high-bandwidth inter-spacecraft stellar and metrology pointing control, alignment and shear correction, delay and delay-rate estimation, visibility calibration, and robust fringe tracking in the presence of local and inter-spacecraft dynamics. This paper is based on the StarLight project design-capture of March 2002 and will describe the StarLight Interferometer System architecture and selected operational concepts (both of which have relevance to the on-going TPF Technology Program).

stellar↗

State Estimation of Main Rotor Flap and Lead-Lag Using Accelerometers and Laser Transducers on the RASCAL UH-60 Helicopter

Modern rotorcraft flight control system designs which promise to yield high vehicle response bandwidth and good gust rejection can benefit from the use of rotor-state feedbacks. The measurement of main rotor blade motions is also desirable to validate and improve rotorcraft simulation models, to identify high-order linear flight dynamics models, to provide rotor system health monitoring; during flight test, and to provide for correlation with acoustic measurements from wind tunnel and flight tests. However, few attempts have been made to instrument a flight vehicle in this manner, and no previous system has had the robustness and accuracy required for these diverse applications. A rotor blade motion measurement and estimation system has been developed by NASA and the U.S. Army for use on the Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) helicopter. RASCAL is a UH-60 Blackhawk which is being modified at Ames Research Center in a phased development program for use in flight dynamics and controls, navigation, airspace management, and rotorcraft human factors research. The aircraft will feature a full-authority, digital, fly-by-wire research flight control system; a coupled ring laser gyro, differential GPS based navigation system; a stereoscopic color wide field of view helmet, mounted display; programmable panel mounted displays; and advanced navigation sensors. The rotor blade motion system is currently installed for data acquisition only, but will be integrated with the research flight control system when it is installed later this year.

Fletcher, Jay W.↗

Comparison of Fatigue Life Estimation Using Equivalent Linearization and Time Domain Simulation Methods

The Monte Carlo simulation method in conjunction with the finite element large deflection modal formulation are used to estimate fatigue life of aircraft panels subjected to stationary Gaussian band-limited white-noise excitations. Ten loading cases varying from 106 dB to 160 dB OASPL with bandwidth 1024 Hz are considered. For each load case, response statistics are obtained from an ensemble of 10 response time histories. The finite element nonlinear modal procedure yields time histories, probability density functions (PDF), power spectral densities and higher statistical moments of the maximum deflection and stress/strain. The method of moments of PSD with Dirlik's approach is employed to estimate the panel fatigue life.

Mei, Chuh↗

Improved PLL For FM Demodulator

Phase-locked loop (PLL) for frequency demodulator contains improved frequency-to-voltage converter producing less ripple than conventional phase detector. In improved PLL, phase detector replaced by state estimator, implemented by ramp/sample-and-hold circuit. Intended to reduce noise in receiver of frequency-modulated (FM) telemetry link without sacrificing bandwidth. Also applicable to processing received FM signals.

Kirkham, Harold↗

Recent Results from the Goldstone Orbital Debris Radar: 2016-2017

Since 1993, the NASA Orbital Debris Program Office has used the Goldstone Orbital Debris Radar (Goldstone) to sample statistically the orbital debris environment. Due to the sensitivity of this radar, which can detect an approximately 3 mm-diameter conducting sphere at 1,000 km, it has filled an important role in the characterization of the sub-centimeter-sized orbital debris population. Through the years, the capabilities of this system have increased – recent updates include increased receiver bandwidth and a change in the bi-static observation geometry – both of which enhance the radar’s ability to estimate orbital parameters. In 2016, dual polarization capability was added, making this the first year where both right- and left-hand circularly polarized information was available from this sensor. This additional polarization information may enable better characterization of sub-centimeter-sized particles in low Earth orbit, particularly since the receiver triggers on reflected energy from both left- and right-handed circular polarizations independently. In this paper, we present measurements and results derived from data taken during the calendar years (CY) 2016-2017 by Goldstone and compare this dataset to measurements taken by the Haystack Ultra-wideband Satellite Imaging Radar (HUSIR) during a similar timeframe.

Murray, James↗

Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Aluminum Manufacturing

Energy bandwidth studies can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities in U.S. manufacturing. This bandwidth study is one of a series of six energy bandwidth studies on lightweight structural materials manufacturing. The study examines energy consumption and potential energy savings opportunities in U.S. aluminum manufacturing. The study relies on multiple sources to estimate the energy used in the manufacturing of the material for lightweighting applications (automotive and aerospace), accounting for approximately 28% of overall U.S. aluminum production in 2010. Energy savings opportunities for the five manufacturing subareas studied are based on technologies currently in use or under development.

energy energy bandwidth study, aluminum, advanced ↗

Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Titanium Manufacturing

Energy bandwidth studies can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities in U.S. manufacturing. This bandwidth study is one of a series of six energy bandwidth studies on lightweight structural materials manufacturing. The study examines energy consumption and potential energy savings opportunities in U.S. titanium manufacturing. The study relies on multiple sources to estimate the energy used in the manufacturing of the lightweight material for four application areas (automotive, wind energy, aerospace, and pressure vessels), accounting for approximately 75% of overall U.S. titanium production in 2010. Energy savings opportunities for the three manufacturing subareas studied are based on technologies currently in use or under development.

energy bandwidth study, titanium, advanced manufac↗

High-bandwidth polarimeter for a high density, accelerated spheromak

A three-beam heterodyne polarimeter has been built to diagnose the PI-1 plasma injector at General Fusion, Inc. The polarimeter measures plasma density and Faraday rotation, which can provide estimates of magnetic field magnitude and direction. Two important calibration steps are required for the polarimeter to produce reasonable Faraday rotation signals. Beam polarization ellipticity must be measured to ensure there is a linear Faraday rotation response. In addition, the two beams travelling through the plasma must be collinear to reduce error due to differences in plasma density. Once calibrated, the Faraday rotation signals are in much better agreement with other diagnostics. For a null signal, the Faraday rotation measurement noise floor is 0.1° at 0.5 MHz bandwidth. Comparing preliminary spheromak Faraday rotation measurements to a model, the maximum error is about 0.3° at 0.5 MHz bandwidth, which is primarily due to electrical noise during the injector's capacitor discharge and limitations of the model. At a bandwidth of 0.5 MHz, the polarimeter has an axial resolution between 6 cm and 30 cm depending on the speed of the spheromak, which varies between 30 km/s and 150 km/s. The spheromak length ranges from 0.75 m to 2 m. Additional polarimeter chords will be added in future upgrades.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Magnesium Manufacturing

Energy bandwidth studies can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities in U.S. manufacturing. This bandwidth study is one of a series of six energy bandwidth studies on lightweight structural materials manufacturing. The study examines energy consumption and potential energy savings opportunities in U.S. magnesium manufacturing. The study relies on multiple sources to estimate the energy used in the manufacturing of the lightweight material for four application areas (automotive, wind energy, aerospace, and pressure vessels), accounting for approximately 32% of overall U.S. magnesium production in 2010. Energy savings opportunities for the four manufacturing subareas studied are based on technologies currently in use or under development.

energy energy bandwidth study, magnesium, advanced↗

A Frequency-Domain Substructure System Identification Algorithm

A new frequency-domain system identification algorithm is presented for system identification of substructures, such as payloads to be flown aboard the Space Shuttle. In the vibration test, all interface degrees of freedom where the substructure is connected to the carrier structure are either subjected to active excitation or are supported by a test stand with the reaction forces measured. The measured frequency-response data is used to obtain a linear, viscous-damped model with all interface-degree of freedom entries included. This model can then be used to validate analytical substructure models. This procedure makes it possible to obtain not only the fixed-interface modal data associated with a Craig-Bampton substructure model, but also the data associated with constraint modes. With this proposed algorithm, multiple-boundary-condition tests are not required, and test-stand dynamics is accounted for without requiring a separate modal test or finite element modeling of the test stand. Numerical simulations are used in examining the algorithm's ability to estimate valid reduced-order structural models. The algorithm's performance when frequency-response data covering narrow and broad frequency bandwidths is used as input is explored. Its performance when noise is added to the frequency-response data and the use of different least squares solution techniques are also examined. The identified reduced-order models are also compared for accuracy with other test-analysis models and a formulation for a Craig-Bampton test-analysis model is also presented.

Blades, Eric L.↗

Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Chemical Manufacturing

Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. chemical manufacturing. The study relies on multiple sources to estimate the energy used in the production of 74 individual chemicals, representing 57% of sector-wide energy consumption. Energy savings opportunities for individual chemicals and for 15 subsectors of chemicals manufacturing are based on technologies currently in use or under development; these potential savings are then extrapolated to estimate sector-wide energy savings opportunity.

AMO, 2015↗

Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Petroleum Refining

Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining. The study relies on multiple sources to estimate the energy used in nine individual process areas, representing 68% of sector-wide energy consumption. Energy savings opportunities for individual processes are based on technologies currently in use or under development; these potential savings are then extrapolated to estimate sector-wide energy savings opportunity.

AMO↗

Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Advanced High Strength Steels Manufacturing

Energy bandwidth studies can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities in U.S. manufacturing. This bandwidth study is one of a series of six energy bandwidth studies on lightweight structural materials manufacturing. The study examines energy consumption and potential energy savings opportunities in U.S. advanced high strength steel (AHSS) manufacturing. The study relies on multiple sources to estimate the energy used in the manufacturing of the lightweight material for automotive applications, accounting for nearly 100% of U.S. AHSS production in 2010. Energy savings opportunities for the six manufacturing subareas studied are based on technologies currently in use or under development.

energy bandwidth study, advanced high strength ste↗

Observation of the fundamental Nyquist noise limit in an ultra-high Q-factor cryogenic bulk acoustic wave cavity

Thermal Nyquist noise fluctuations of high-Q bulk acoustic wave cavities have been observed at cryogenic temperatures with a DC superconducting quantum interference device amplifier. High Q modes with bandwidths of few tens of milliHz produce thermal fluctuations with a signal-to-noise ratio of up to 23 dB. The estimated effective temperature from the Nyquist noise is in good agreement with the physical temperature of the device, confirming the validity of the equivalent circuit model and the non-existence of any excess resonator self-noise. The measurements also confirm that the quality factor remains extremely high (Q > 10{sup 8} at low order overtones) for very weak (thermal) system motion at low temperatures, when compared to values measured with relatively strong external excitation. This result represents an enabling step towards operating such a high-Q acoustic device at the standard quantum limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Striped Multiferroic Phase in Double-Exchange Model for Quarter-Doped Manganites

The phase diagram of quarter-hole-doped perovskite manganites is investigated using the doubleexchange model. An exotic striped type-II multiferroic phase, where 25% of the nearest-neighbor spin couplings are orthogonal to each other, is found in the narrow-bandwidth region. Comparing with the spiral-spin ordering phase of undoped manganites, the multiferroic Curie temperature of the new phase is estimated to be 4 times higher, while the ferroelectric polarization is similar in magnitude. Our study provides a path for noncollinear spin multiferroics based on electronic self-organization, different from the traditional approach based on superexchange frustration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modulation/demodulation techniques for satellite communications. Part 4: Appendices

The use of the Viterbi algorithm in a general context is examined. The generalized transfer function bounds are given which permit the following applications to be carried out: maximum likelihood demodulation of such bandwidth modulations as minimum-shift-keying and continuous phase frequency-shift-keying, demodulation of intersymbol interference and partial response signals, estimation and smoothing, and simultaneous phase synchronization, and data detection. Sufficient conditions are reviewed for tightening Chernoff and Rhattacharyya bounds.

Omura, J. K.↗