Search NASA⌕ Search

SEARCH · Search NASA

Results for “barrier method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Halogen diffusion on a Ga-stabilized ζ-GaAs(001)–(4 × 2) surface

The atomic and electronic structure of a Ga-stabilized GaAs(001) surface with the ζ(4 × 2) reconstruction and halogens in a number of symmetric sites on the surface are calculated by the plane-wave projector augmented wave method. The energy barriers of halogen-atom diffusion on this surface are calculated, which allow determination of the most preferred paths of their migration. It is shown that there is a low barrier (0.17–0.23 eV) for the diffusion of all halogens under consideration (I, Br, Cl, F) along the surface gallium dimer, whereas the barrier is significantly higher for diffusion between adjacent gallium dimers. In general, the energy barriers for halogen diffusion in both directions ([110] and [1-10]) point to their high surface mobility, despite high binding energies at a number of surface adsorption sites.

36 MATERIALS SCIENCE↗

Passivation of Stainless Steel for Tritium Service

The goal of this project was to develop a method to passivate stainless steel components using electropolishing techniques and heat treatment methods. The process is intended to limit the in growth and isotope exchange of hydrogen with tritium and deuterium as well as other undesired contaminants of standard gas mixtures. This process has been named Q-Passivation, to set is apart from standard industrial passivation methods and a patent application has been submitted and publish on the process. The basis used for the development of this process was taken from the surface analytical data collected from decommissioned commercial tritium containment vessels that are used to hold standard gas mixtures. The information gained from the surface analysis along with the methods to eliminate residual hydrogen contamination will provide a reasonable method for passivation. Barriers in fabricating test vessels for tritium have delayed production for tritium exposure trials. Some of these barriers include base metal composition that may meet compositional specifications but does not meet a quality inspection as it contains inclusions, additional phases, and other metallurgical anomalies. A number of issues and challenges were encountered during this project that should be resolved. These challenges include base material specification, a non-destructive quality assurance technique, the use of other materials aside from 304L stainless steel, and reuse of expired standard gas containers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Machine Learned Force Field Modeling of Metal Organic Frameworks for CO2 Direct Air Capture

Metal organic frameworks (MOFs) are a large class of porous materials and have garnered significant interest due to their large surface areas and their tunable physical and chemical properties. Numerous prior studies have been performed to screen large databases of this material class for promising DAC sorbent materials. These studies have often relied on classical model potentials. While density functional theory (DFT) calculations have been shown to be very accurate for modeling the interaction of CO2 with MOFs, such calculations are too computationally demanding for statistically significant adsorption predictions. To overcome this barrier, we developed methods for training models to achieve DFT-level accuracy for the forces and energies associated with MOF flexibility and CO2 adsorption using machine learned force fields (MLFFs). These methods were parametrized based on DFT calculations of CO2 in a flexible MOF and used to predict MOF structural properties as well as CO2 adsorption in several MOFs.

Findley, John↗

Lessons Learned for Transmission Cost Allocation in U.S. Regional Markets

Expanding electric transmission can facilitate generator interconnection and improve grid reliability. Assigning costs for new transmission infrastructure is highly contentious because these costs can have a direct impact on energy prices and ratepayer bills. In this report, we evaluate what factors influence successful transmission cost allocation agreements. Through a review of legal disputes, existing cost allocation practices, and regional case studies, we identify potential strategies to minimize cost allocation disputes for future projects. The report also highlights the processes by which regions can update their cost allocation methods. While we do not consider cost allocation methods currently under development for compliance with FERC Order 1920, the trends and lessons learned identified in this report can inform discussions on effective cost allocation methods to reduce barriers for transmission development.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Fabrication process development of SiC/superalloy composite sheet for exhaust system components

A chemical compatibility study was conducted between SiC filament and the following P/M matrix alloys: Waspaloy, Hastelloy-X, NiCrAlY, Ha-188, S-57, FeCrAlY, and Incoloy 800. None of the couples demonstrated sufficient chemical compatibility to withstand the minimum HIP consolidation temperatures (996 C) or intended application temperature of the composite (982 C). However, Waspaloy, Haynes 188, and Hastelloy-X were the least reactive with SiC of the candidate alloys. Chemical vapor deposited tungsten was shown to be an effective diffusion barrier between the superalloy matrix and SiC filament providing a defect-free coating of sufficient thickness. However, the coating breaks down when the tungsten is converted into intermetallic compounds by interdiffusion with matrix constituents. Waspaloy was demonstrated to be the most effective matrix alloy candidate in contact with the CVD tungsten barrier because of its relatively low growth rate constant of the intermediate compound and the lack of formation of Kirkendall voids at the matrix-barrier interface. Fabrication methods were developed for producing panels of uniaxial and angle ply composites utilizing CVD tungsten coated filament.

Cornie, J. A.↗

Mechanism of supporting sub-communicator collectives with O(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a bather algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗

Mechanism of supporting sub-communicator collectives with O(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a bather algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗

Mechanism of supporting sub-communicator collectives with o(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a barrier algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗

Enabling Dynamic Probabilistic Risk Assessment of Physical Security Using EMRALD and MAAP

The optimization of physical security in nuclear power plants requires sophisticated methodologies that integrate operator actions and plant behavior through advanced simulation tools. To address this, Idaho National Laboratory [JL2.1]has developed the Modeling and Analysis for Safety and Security using the Dynamic EMRALD Framework (MASS-DEF) methodology, an approach that integrates force-on-force simulations, dynamic probabilistic risk assessment, and thermal-hydraulics modeling [JL3.1]to enhance security planning while reducing costs. We developed a tool that produces reduced order models using thermal hydraulic simulations from the Modular Accident Analysis Program (MAAP) [1]. These models can quickly evaluate reactor core behavior during attack simulations, and in so doing, address two barriers of traditional methods: (1) MAAP simulations are computationally intensive, and (2) attack scenarios must be run in a secure environment, which complicates analysis and validation. By precomputing scenario outcomes for a small number of modified parameters, the reduced order model significantly decreases the computational cost and enables offsite review of the results.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Circularly polarized antennas for active holographic imaging through barriers

Circularly-polarized antennas and their methods of use for active holographic imaging through barriers. The antennas are dielectrically loaded to optimally match the dielectric constant of the barrier through which images are to be produced. The dielectric loading helps to remove barrier-front surface reflections and to couple electromagnetic energy into the barrier.

47 OTHER INSTRUMENTATION↗

Sub Coulomb barrier d+ 208 Pb scattering in the time-dependent basis function approach

We employ the non-perturbative time-dependent basis function (tBF) approach to study the scattering of the deuteron on 208 Pb below the Coulomb barrier. We obtain the bound and discretized scattering states of the projectile, which form the basis representation of the tBF approach, by diagonalizing a realistic Hamiltonian in a large harmonic oscillator basis. We find that the higher-order inelastic scattering effects are noticeable for sub barrier scatterings with the tBF method. We have successfully reproduced experimental sub Coulomb barrier elastic cross section ratios with the tBF approach by considering only the electric dipole (E1) component of the Coulomb interaction between the projectile and the target during scatterings. Here, we find that the correction of the polarization potential to the Rutherford trajectory is dominant in reproducing the data at very low bombarding energies, whereas the role of internal transitions of the deuteron projectile induced by the E1 interaction during the scattering becomes increasingly significant at higher bombarding energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Numerical quantum clock simulations for measuring tunneling times

Here, we numerically study two methods of measuring tunneling times using a quantum clock. In the conventional method using the Larmor clock, we show that the Larmor tunneling time can be shorter for higher tunneling barriers. In the second method, we study the probability of a spin-flip of a particle when it is transmitted through a potential barrier including a spatially rotating field interacting with its spin. According to the adiabatic theorem, the probability depends on the velocity of the particle inside the barrier. It is numerically observed that the probability increases for higher barriers, which is consistent with the result obtained by the Larmor clock. By comparing outcomes for different initial spin states, we suggest that one of the main causes of the apparent decrease in the tunneling time can be the filtering effect occurring at the end of the barrier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Segmented Thermal Barrier Coating

An article coated with a thermal barrier coating system, and method for preparation of a coated article. The article has a macro-segmented thermal barrier coating due to the presence of a pattern of three-dimensional features. The features may be a series of raised ribs formed on the substrate surface and being spaced from 0.05 inches to 0.30 apart. The ribs have a width W ranging from 0.005 inches to 0.02 inches, and a height R ranging from 25% to 100% of the thickness of the barrier coating. Alternately, the features may be a similar pattern of grooves formed in the surface of the substrate. Other embodiments provide segmentation by grooves or ribs in the bond coat or alternately grooves formed in the thermal barrier layer.

James L Smialek↗

Direct control and characterization of a Schottky barrier by scanning tunneling microscopy

Scanning tunneling microscopy (STM) methods are used to directly control the barrier height of a metal tunnel tip-semiconductor tunnel junction. Barrier behavior is measured by tunnel current-voltage spectroscopy and compared to theory. A unique surface preparation method is used to prepare a low surface state density Si surface. Control of band bending with this method enables STM investigation of semiconductor subsurface properties.

Bell, L. D.↗

Role of bond coat processing methods on the durability of plasma sprayed thermal barrier systems

Metallic alloy bond coats are used as an interlayer to promote adhesion of ceramic Thermal Barrier Coatings (TBCs) to the superalloy substrates. These bond coats can be applied through a variety of processing means such as Air Plasma Spray (APS), High-Velocity Oxy Fuel spray (HVOF), and Vacuum Plasma Spray (VPS). While widely adopted in the industry, some uncertainties remain as to the specific microstructural attributes which are influenced by the processing routes and their implications on durability. This paper seeks to elucidate these subtleties between bond coat deposition processing routes through an integrated study of processing to connect to furnace cycle durability on a single bond coat chemistry of NiCoCrAlYHfSi. A standard porous APS TBC top coating based on yttria stabilized zirconia (7YSZ) was consistently applied on these distinct bond coats and tested for durability in cyclic furnace testing at 1100 °C. The results point to substantial differences in durability which are not readily explained only by the variances in coating roughness. Detailed assessment of deposited bond coat properties (modulus, thermal expansion, chemistry) provided some explanation relative to durability. Here, the results suggest a complex interplay among roughness, compliance, aluminum diffusion pathway, and thermal expansion mismatch. Photo-stimulated luminescence piezospectroscopy (PLPS) provided additional insights enabling a comprehensive assessment of processing-performance linkages.

36 MATERIALS SCIENCE↗

Methods and Apparatus for Pulsed-DC Dielectric Barrier Discharge Plasma Actuator and Circuit

A plasma generating device intended to induce a flow in a fluid via plasma generation includes a dielectric separating two electrodes and a power supply. The first electrode is exposed to a fluid flow while the second electrode is positioned under the dielectric. The power supply is electrically coupled to a switch and the first and second electrodes. When the power supply is energized by repeated action of the switch, it causes a pulsed DC current between the electrodes which causes the fluid to ionize generating a plasma. The generation of the plasma induces a force with a velocity component in the fluid.

Corke, Thomas C.↗

Apparatus and method for inspecting integrity of a multi-barrier wellbore

An apparatus for inspecting integrity of a multi-barrier wellbore is described. The apparatus includes at least one source to generate radiation to impinge a target volume of the wellbore. The apparatus includes a source collimator having a plurality of alternating blocking channels and passing channels to direct radiation to impinge the target volume, such that the radiation directed from each passing channel forms a plurality of field of views extending radially into the target volume. The apparatus further includes at least one detector to receive backscatter rays arising from each respective field of view from the plurality of field of views and to generate an image representative of an inspected portion of the wellbore. The apparatus is useful for inspecting very small volumes in the multiple barriers of the wellbore and determine the integrity of the wellbore based on the different densities in the image of the inspected portion.

02 PETROLEUM↗

Barriers and dispersal surfaces in minimum-time interception

A method is proposed for mapping the barrier, dispersal, and control-level surfaces for a class of minimum-time interception and pursuit-evasion problems. Minimum-time interception of a target moving in a horizontal plane is formulated in a coordinate system whose origin is at the interceptor's terminal position and whose x-axis is along the terminal line of sight. This approach makes it possible to discuss the nature of the interceptor's extremals, using its extremal trajectory maps (ETMs), independently of target motion. The game surfaces are constructed by drawing sections of the isochrones, or constant minimum-time loci, from the interceptor and target ETMs. In this way, feedback solutions for the optimal controls are obtained. An example involving the interception of a target moving in a straight line at constant speed is presented.

Rajan, N.↗