SEARCH · Search NASA
Results for “biomass valorization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interdependence of Solvent and Catalyst Selection on Low Pressure Hydrogen-Free Reductive Catalytic Fractionation
Not Available
Reversibly soluble bases for lignin oxidative depolymerization
Disclosed herein are lignin valorization strategies that integrate thermochemical pretreatment strategies. Using methods disclosed herein, yields of greater than 40% of usable monomers are obtained from lignin in biomass. The monomers can be assimilated by strains of Pseudomonas putida.
Ferric chloride aided peracetic acid pretreatment for effective utilization of sugarcane bagasse
The synergetic impacts of ferric chloride aided peracetic acid (FPA) pretreatment were investigated to enhance the total biomass utilization through effective cellulose conversion and high-quality lignin production. The sugarcane bagasse pretreatment with 2% peracetic acid (PAA) and 0.1 mol/L ferric chloride (FeCl 3 ) effectively removed 57.3% of lignin and 72.2% of xylan while preserving ~ 97% of cellulose from sugarcane bagasse under mild temperature (90 °C). The FPA pretreated sugarcane bagasse was effectively hydrolyzed with a glucose yield of 313.0 mg/g-biomass, which was 4.5 times higher than the yield of untreated biomass (69.75 mg/g-biomass) and 1.6 and 3.6 times higher than that of individual PAA and FeCl 3 pretreated sugarcane bagasse, respectively. The regenerated lignin (FPA lignin) showed great potential for further valorization by preserving the major interunit linkage (up to 86% of β-O-4) without significant carbohydrate contamination and lignin condensation due to its mild reaction conditions. In this paper, the combination of PAA and FeCl 3 synergistically enhanced the pretreatment efficiency on sugarcane bagasse and resulted in high fermentable sugar and high-quality lignin production.
Heterodoxy in Fast Pyrolysis of Biomass
As the field of fast pyrolysis has matured, it has been accompanied by a kind of orthodoxy in its practice. Among these orthodoxies are the following: (1) oxygen should be excluded from the pyrolysis process; (2) little sugar is produced during pyrolysis; and (3) the major product of pyrolysis is a low-value emulsion in water. Adherence to these tenets is an impediment to the commercial development of fast pyrolysis. Over the past 15 years, research at Iowa State University’s Bioeconomy Institute has challenged these tenets with what might be called heterodoxy in the science and engineering of fast pyrolysis: adding oxygen producing sugars, and fractionating bio-oil into valorized products. This paper reviews these new approaches to pyrolysis and concludes with an outlook for further developing them.
Exoproteomics Reveals Outer Membrane Vesicle Mediated Catabolism of Lignin-Derived Aromatics by P. putida KT2440
Lignin is an abundant component of plant cell walls which is heterogeneous and highly resistant to degradation. Biological funneling of lignin via microbes represents an efficient approach for reducing chemical heterogeneity and generating molecules which can be valorized into performance-advantaged materials. Pseudomonas putida KT2440 (P. putida) catabolizes lignin-derived aromatic monomers rapidly and efficiently via the b-ketoadipate (bKA) pathway and our data suggest P. putida may depolymerize HMW lignin as well [1]. The mechanism by which HMW lignin is depolymerized by bacteria remains unknown. Intriguingly, we found that P. putida secretes outer membrane vesicles (OMVs) of two distinct sizes in the presence of lignin. Here, we describe the temporal proteome of OMVs and the vesicle-free secretome (VFS) in the presence or absence of lignin. Enzymes involved in aromatic catabolism via the bKA pathway are temporally enriched into OMVs in the presence of lignin. Isolated OMVs enhance growth of P. putida mutants unable to grow on model lignin-derived aromatics, and turnover protocatechuic acid in vitro. Together, this work leads us to hypothesize mechanisms by which OMVs contribute to extracellular aromatic catabolism by P. putida. Ongoing and future work seeks to further understand this phenomena in the context of both fundamental an applied lignin conversion research areas.
Sustainable Aviation Fuel from High-Strength Wastewater via Membrane-Assisted Volatile Fatty Acid Production: Experimental Evaluation, Techno-economic, and Life-Cycle Analyses
To reduce emissions from combustion of fossil fuels, sustainable aviation fuels (SAFs) have the potential to decarbonize the aviation sector. Redirecting wastes from conventional waste management practices and using them as cost-effective feedstocks for low-carbon fuels can reduce emissions from both waste disposal and fuel combustion. One approach is to upgrade wet wastes to SAF precursors, such as volatile fatty acids (VFAs). Here, in this study, novel membrane-assisted arrested methanogenesis was developed to convert high-strength wastewater to VFAs. Based on experimental results of VFA production, techno-economic and life-cycle analyses were conducted to estimate the potential economic and environmental benefits of SAF production from high-strength wastewater via VFAs. By evaluating three proposed scenarios for VFA production, a minimum production cost of VFA is achieved at $\$$0.60/kg VFA at a wastewater flow rate of 1100 MT/d. For the corresponding VFA-derived SAF, the estimated minimum fuel selling price is $\$$4.64/gasoline gallon equivalent. The life-cycle analysis shows that up to a 71% reduction in greenhouse gas emissions can be achieved relative to its fossil-counterpart along with lower water and fossil-fuel consumption.
Artificial intelligence-driven municipal solid waste sortation and its significance on downstream waste valorization in the United States: Techno-economic and life cycle assessment
Municipal solid waste (MSW) generation is quickly increasing due to population growth, industrialization, and urbanization. Current sorting technologies, e.g., optical sorters have low sortation efficiency and produce contaminated sorted materials unsuitable for downstream valorization. This study evaluates a novel artificial neural network (ANN)-based MSW sortation system through sorting efficiencies, economic performance, and environmental impacts. ANN system can sort up to 8 plastic types and all organic waste (i.e., food, yard, and paper waste) with 99% and 93% recovery efficiency, respectively, compared to optical sortation which could separate only polyvinyl chloride (PVC) plastic ultimately producing mixed plastics (except PVC) and organics streams as products. Nonetheless, their sortation costs are similar, $28.7 for ANN-based sortation and $28 for optical sortation per metric ton (Mt) of MSW at processing capacity of 94,860 metric tons (Mt)/yr of MSW in the United States. Additionally, ANN system produced high purity feedstocks for downstream valorization. A biochar pyrolysis plant modeled to process 3.6 and 14 Mt/h of sorted yard waste outperformed biochar production from mixed organic fraction (MOF), achieving 8% lower production cost and 34% lower global warming impact (1.37 kg CO 2 eq. per kg) compared to biochar derived from mixed organic feedstock (2.08 kg CO 2 eq.).
Bioconversion of wastewater-derived cresols to methyl muconic acids for use in performance-advantaged bioproducts
We combine metabolic engineering and polymer chemistry to convert cresols, a main component of biomass-derived catalytic fast pyrolysis wastewater, to methyl muconic acids that have performance-advantaged properties in nylons and plasticizers.
Hybrid Bioenergy and Hydropower Systems: Leveraging Heterogeneous Biomass and Wastes from Watersheds
Sandia National Laboratories and INL explore the water-for-energy nexus in this white paper, focusing on the impact of heterogeneous watershed waste materials on hydropower facilities. They identify key challenges—such as wildfires, and debris intercepted at water intakes—that adversely affect both watershed health and hydropower operations. More importantly, SNL and INL highlight opportunities to valorize these bioresources and waste materials by converting them into usable energy.
Circular Perspective for Utilization of Industrial Wastewaters via Phytoremediation
Wastewater generated in municipal rendering facilities requires multi-step treatment, but it may also serve as a source of nutrients and water and thus may be valorized before or instead of the necessary wastewater treatment operations. In this work, wastewaters from a composting plant were utilized to support the growth of Miscanthus x giganteus, known as both a remediation plant and an energy biomass source. A pot experiment was established to compare the effects of different wastewater doses (0, 50, 100, and 200 mL per pot per week) on the miscanthus biomass yield, phytoextraction of heavy metals, biomass heat of combustion, and plant condition. The increase in the wastewater dose resulted in increases in both biomass yield (from about 44 to 139%) and biomass heat of combustion (from 7 to 17%) when compared to the control sample, with no adverse effects on plant physiological parameters. The highest concentrations of metals were found in miscanthus grown with the highest dose of wastewaters. It was found that higher wastewater dose correlates to both higher phytoextraction and phytorecovery of metals from plant substrate and wastewaters. The highest metal uptake was identified for Fe (431 mg·pot −1 ), followed by Al, Zn, Mn, Cu, Ni, Cr. The lowest metal uptake was noted for Pb, Co and Cd (0.88, 0.11, and 0.95 mg·pot −1 , respectively). The results indicate that miscanthus can be recommended for industrial wastewater treatment. In addition, due to high absorption efficiency of the substrate components, miscanthus can be used as a remediation tool, e.g., for the ecological stabilization of remediation of metal-polluted soils, especially in municipal facilities like rendering plants. This presents a circular perspective for the valorization of post-fermentation wastewaters with subsequent growth of energy crops, with other potential benefits for the environment, such as soil treatment, absorption of CO 2 , and air purification.
Separation of bio-based glucaric acid via antisolvent crystallization and azeotropic drying
A downstream process was developed for producing pure monopotassium glucarate and crystalline glucaric acid from a fermentation broth.
Oxidative Catalytic Fractionation of Lignocellulosic Biomass Using a Co-N-P-C Catalyst and One-Step Isolation of Aromatic Monomers via Centrifugal Partition Chromatography
Methods for catalytic fractionation of biomass provide a means to convert lignin directly into monomers while generating a high-quality cellulosic stream, contrasting conventional biomass pretreatment strategies that prioritize the cellulosic fraction. Here, a nonprecious-metal Co-N-P-C catalyst is identified for aerobic oxidative catalytic fractionation (OCF) of poplar feedstock in dimethyl carbonate that achieves significantly higher yields of aromatic monomers (24 wt %) relative to those obtained with a recently reported Co-N-C catalyst in acetone solvent (15 wt %). Mechanistic studies indicate that the acidic properties of the catalyst contribute to its improved performance by promoting extraction of lignin from insoluble polysaccharides. This OCF process is complemented by the development of a new centrifugal partition chromatography (CPC) method that supports isolation of all five major aromatic monomers (syringic acid, syringaldehyde, vanillic acid, vanillin, and para-hydroxybenzoic acid) in a single liquid–liquid extraction purification step. Furthermore, this OCF/CPC sequence has important implications for future lignin valorization efforts.
Techno-Economic Analysis and Life-Cycle Assessment of Emerging Technologies for Bioprocessing Separations
Limited availability, rising costs, and environmental concerns about fossil fuels have generated considerable interest in finding alternative, renewable sources including biomass, which can be converted into a number of biofuels and bioproducts. In comparison to petroleum-based products, high processing costs, mainly associated with bioprocessing separations, limit widespread implementation of biofuels and bioproducts. Bioprocess-related separations are also complicated, regardless of the conversion pathway, due to the dilute nature of products and the chemically complex mixtures that result from biomass deconstruction. In many cases, bioprocessing separation approaches lack a technology baseline, or definition of the state of technology (SOT). This work focuses on evaluating the technology readiness of novel separations technologies for the conversion of biomass into biofuels and bioproducts and will address three key topics: 1) SOT description, 2) economic viability analysis of both SOT and innovative separations, and 3) environmental impact assessment of both SOT and novel processes. The current SOT for lignin valorization, dilute carbon recovery, and impurity removal is used to identify potential opportunities for improvement and provide a baseline for comparison with the emerging technologies. Detailed techno-economic analysis (TEA) and life cycle assessment (LCA) are applied to understand the key drivers and challenges related to the economic feasibility and environmental impacts, respectively.
Structural features of xylan dictate reactivity and functionalization potential for bio-based materials
Plant-based materials have the potential to replace some petroleum-based products, offering compostability and biodegradability as critical advantages. Xylan-rich biomass sources are gaining recognition due to their abundance and underutilization in current industrial applications. Research of potential xylan applications has been complicated by the complex and heterogeneous structure that varies for different xylan feedstocks. Acylation is a broadly used reaction in functionalization of polysaccharides at an industrial scale. However, the efficiency of this reaction varies with the xylan source. To optimize xylan valorization, a systematic understanding of structure–reactivity relationships is essential. This study explores, characterizes, and compares various xylan feedstocks in the acylation process. Xylan feedstocks were analyzed for their chemical composition, degree of polymerization, branching, solubility, and presence of impurities. These features were correlated with xylan glycotypes’ reactivity toward functionalization with succinic anhydride in an optimized DMSO/KOH condition, achieving carboxyl contents of up to 1.46. We used principal component analysis and hierarchical clustering to identify key structural features of xylan that promote its reactivity. Our findings reveal that xylans with higher xylose content and lower degrees of branching exhibit enhanced reactivity, achieving higher carboxyl content and yields. Structural analyses confirmed successful modification, and light scattering analyses showed dramatic changes in the solution properties. Succinylation improves the solubility and film-forming properties of native xylans. This study shows key structure–reactivity relationships in xylan succinylation, establishing that low branching, high xylose content, and reduced lignin impurity enhance chemical functionalization. The results offer a framework for selecting optimal biomass feedstocks and support future efforts in genetic and synthetic biology to design plants with tunable xylan architectures. These findings advance the hemicellulose valorization for applications in coatings and packaging.
Insights into genetic determinants of volatile fatty acid catabolism in Cupriavidus necator H16
The soil bacterium Cupriavidus necator H16 is a promising host for upgrading waste-derived volatile fatty acids (VFAs) into renewable biochemicals. While bacterial VFA metabolic pathways are well understood, the C. necator genome encodes multiple enzymes for each catabolic step, and the degree of substrate specificity among these homologs is currently unknown. To gain insight into the catabolism of VFA substrates in C. necator, we performed transcriptomics on cells grown with acetate, propionate, butyrate, valerate, or hexanoate as the sole source of carbon and energy. These data revealed that C. necator upregulates multiple sets of genes putatively involved in substrate activation and β-oxidation in response to VFAs. To better understand this redundancy, we performed biochemical and genetic deletion studies of acyl-CoA synthetase enzymes upregulated during growth on VFA substrates. These results demonstrated the functional redundancy of the C. necator VFA catabolism and led to the identification of a gene cluster, H16_B1332-H16_B1337, that contains several genes that are important for the efficient catabolism of hexanoate. Constitutive expression of a second copy of these hexanoate catabolism genes did not improve growth of C. necator on hexanoate, suggesting that other factors (e.g., redox, transport, or toxicity) may be limiting for growth. Collectively, this work provides new insight into how C. necator uses metabolic regulation to effectively utilize VFA substrates and uncovers the important role of the gene cluster H16_B1332-H16_B1337 in the catabolism of hexanoate.
Effective biomass fractionation and lignin stabilization using a diol DES system
A sustainable and renewable biorefinery will increase the economic viability of lignocellulose-derived products. In this study, a diol-based deep eutectic solvent (DES) was developed to reduce the recalcitrance of bamboo, facilitate saccharification and valorize the lignin fraction. The DES pretreatment dramatically enhanced glucan digestibility by the effective removal of lignin (as high as 85.45%) and xylan (91.12%). Notably, the recovered lignin from DES pretreatment was protected during the fractionation, showing well-preserved β-O-4 structures (31.82%–59.06%). The mechanism of lignin protection was analyzed to be accomplished by incorporating the diol hydroxyl functional groups into the α position of the lignin β-O-4 structure via etherification. This work highlighted that diol DES is a promising pretreatment solvent to valorize both cellulose and lignin fractions with high enzymatic hydrolysis yield and high-quality lignin co-product.
Data for "Integrated Green Biorefinery for the Production of Anthocyanins, Fermentable Sugars, and High Pure Lignin from Miscanthus × giganteus "
Miscanthus x giganteus (Mxg) is a promising perennial crop for producing natural colorants, renewable fuels, and bioproducts. However, natural recalcitrance and high pretreatment cost are major barriers to their complete conversion. In this study, a green processing method has been investigated for efficient recovery of natural pigments (anthocyanins), fermentable sugars, and pure lignin from Mxg genotypes using choline chloride-based natural deep eutectic solvents (NADES) systems. Interestingly, choline chloride: lactic acid (ChCl: LA) NADES-processed biomass resulted in 67.8 ± 2.1 μg g−1 of anthocyanins from dry biomass. A maximum of 87.4%–94.1% glucose yield was achieved after enzymatic saccharification. The effective extraction of lignin with high purity with higher β-aryl ether (βO4) bonds from advanced crops is crucial for lignin valorization. Notably, highly pure lignin (≈93.4% ± 1.4%) is achieved after low-temperature NADES pretreatment while retaining lignin’s native structure. 31P nuclear magnetic resonance demonstrated that total phenolics for ChCl: LA-lignin resulted in 1.20 mmol g−1 hydroxyls. The relative monolignol composition of syringyl (S), guaiacyl (G), and p-hydroxyphenyl (H) is 19.0, 65.7, and 14.3%, respectively, as evidenced by heteronuclear single quantum coherence analysis. This study provides a novel approach for obtaining high-purity lignin for catalytic depolymerization for oligomers and bifunctional monoaromatics production and leverages current cellulosic biorefinery technologies.