Search NASA⌕ Search

SEARCH · Search NASA

Results for “broadband absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

In-Band Scattering and Absorption of Infrared Blocking Foam Filters for Millimeter-wave Cameras

Expanded closed-cell polymer foams are widely used as thermal infrared (IR) blocking filters in millimeter-wave cameras, particularly for Cosmic Microwave Background observations. Precise knowledge of their millimeter-wave properties is essential for optimizing sensitivity. We present broadband (150 GHz - 2 THz) transmittance spectroscopy of Styroace-II and several Zotefoam filters, fitting their spectra with a radiative transfer model incorporating dielectric absorption and Rayleigh, Mie, and higher-order scattering. For a typical 5~cm thick filter stack at 280~GHz, Styroace-II exhibits ${\sim}10\%$ scattering with absorption estimated as ${\lesssim}5\%$ by effective-medium theory, while Zotefoam HD30 offers superior performance at ${\sim}3\%$ scattering and absorption likewise bounded to ${{\lesssim}0.3\%}$. Each model component is constrained at the ${\sim}0.1\%$ transmittance level for millimeter wavelengths. We observe batch-to-batch scattering variability of up to 2 percentage points in foams with multiple tested batches. Less commonly used Zotefoam formulations (LD15 and LD24) can further reduce in-band scattering to ${<}1\%$ while maintaining negligible in-band absorption and likely comparable IR blocking due to shared polyethylene absorption features and similar cell sizes. Based on this work, a filter constructed from the best measured LD24 batch has replaced the Styroace-II filter in a Simons Observatory 220/280 GHz Small Aperture Telescope.

Thomas, Alex [Chicago U., Astron. Astrophys. Ctr.;↗
DOE OSTI2020

New Insights into the Charge-Transfer-to-Solvent Spectrum of Aqueous Iodide: Surface versus Bulk

Liquid phase charge-transfer-to-solvent (CTTS) transitions are important, as they serve as photochemical routes to solvated electrons. Here in this work, broadband deep-ultraviolet electronic sum frequency generation (DUV-ESFG) and two-photon absorption (2PA) spectroscopic techniques were used to assign and compare the nature of the aqueous iodide CTTS excitations at the air/water interface and in bulk solution. In the one-photon absorption (1PA) spectrum, excitation to the 6s Rydberg-like orbital (5p → 6s) gives rise to a pair of spin–orbit split iodine states, 2 P 3/2 and 2 P 1/2 . In the 2PA spectra, the lower-energy 2 P 3/2 peak is absent and the observed 2PA peak, which is ~0.14 eV blue-shifted relative to the upper 2 P 1/2 CTTS peak seen in 1PA, arises from 5p → 6p electronic promotion. The band observed in the ESFG spectrum is attributed to mixing of excited states involving 5p → 6p and 5p → 6s promotions caused by both vibronic coupling and the external electric field generated by asymmetric interfacial solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Time-resolved laser-induced fluorescence of selected even-parity 7p states of Xe I

Lifetimes and self-quenching rates have been measured for excited states of Xe I that were populated using simultaneous two-photon absorption. Lifetimes measured in this study are somewhat shorter than those measured using the broadband-excitation technique. Lifetimes reported here are all faster than 100 nsec. Deactivation rates are approximately 2 x 10 to the -10th cu cm/sec per mol.

Mcgee, T. J.↗
NASA NTRS1994

On the possibility of measuring atmospheric OH using intracavity laser spectroscopy

Intracavity laser spectroscopy (ILS) has been demonstrated to be useful for measuring extremely weak absorption produced by gases in air. ILS is based on the observation that when there are spectrally narrow losses within the cavity of a broadband laser, the laser output has corresponding spectral holes where the laser oscillation is partially quenched. The depth of the laser output dips can be enhanced by a factor of 10(exp 5) over the depth of the initial cavity loss, and absorptivities of 10(exp -8) cm(exp -1) have been measured in lasers only one meter long. With ILS, one can achieve in a compact space a spectral contrast that would otherwise require kilometers of pathlength. ILS systems typically use quasi-continuous wave dye lasers operating close to threshold. The pump laser is modulated from just below to just above the threshold level for the dye laser, and the dye laser output is spectroscopically observed during a well defined time interval after the onset of lasing (the generation time). The spectral contrast of an intracavity absorber is equivalent to that produced by absorption through a path length equal to the generation time multiplied by the speed of light (assuming the cavity is completely filed with the absorber) up to some limiting time. Thus, if one measures the spectrum after 33 microseconds, the effective path length is 10,000 meters.

Mcmanus, J. Barry↗
NASA NTRSDate not supplied

Evaluation of a Variable Facesheet Liner Configuration in Grazing Incidence for Broadband Noise Reduction

Abstract Tests were conducted in the NASA Langley Grazing Flow Impedance Tube (GFIT) to determine the broadband noise reduction capability of a variable facesheet liner. Three uniform liners were designed to achieve sound absorption over distinct frequency regimes at Mach 0.0. Each liner was fabricated and tested in the GFIT at sound pressure levels of 120 and 140 dB, and at tangential flow velocities up to Mach 0.5. A variable facesheet liner was fabricated to combine the geometries of these three liners, such that the facesheet geometry (hole diameter and porosity) was varied across the liner surface. The Prony method was used to educe the impedance of each sample, and these impedances were input to the CHE (Convected Helmholtz Equation) propagation code to predict the acoustic pressure profiles in the GFIT. Comparisons of predicted and measured acoustic pressure profiles were used to confirm the uniformity of all four liners, and to demonstrate the suitability of the CHE code in analysis of the variable facesheet concept. Results showed good comparison at no flow and Mach 0.3, and acceptable comparison at Mach 0.5. The variable facesheet liner provides enhanced broadband noise reduction at the no-flow condition for which it was designed, but further optimization is needed to target flow conditions.

acoustic↗
NASA NTRSDate not supplied

Evaluation of a Variable Facesheet Liner Configuration in Grazing Incidence for Broadband Noise Reduction

Tests were conducted in the NASA Langley Grazing Flow Impedance Tube (GFIT) to determine the broadband noise reduction capability of a variable facesheet liner. Three uniform liners were designed to achieve sound absorption over distinct frequency regimes at Mach 0.0. Each liner was fabricated and tested in the GFIT at sound pressure levels of 120 and 140 dB, and at tangential flow velocities up to Mach 0.5. A variable facesheet liner was fabricated to combine the geometries of these three liners, such that the facesheet geometry (hole diameter and porosity) was varied across the liner surface. The Prony method was used to educe the impedance of each sample, and these impedances were input to the CHE (Convected Helmholtz Equation) propagation code to predict the acoustic pressure profiles in the GFIT. Comparisons of predicted and measured acoustic pressure profiles were used to confirm the uniformity of all four liners, and to demonstrate the suitability of the CHE code in the analysis of the variable facesheet concept. Results showed good comparison at no flow and at Mach 0.3, and acceptable comparison at Mach 0.5. The variable facesheet liner provided enhanced broadband noise reduction at the no-flow condition for which it was designed, but further optimization is needed to target flow conditions.

acoustic↗
NASA NTRS1981

Broadband optical radiation detector

A method and apparatus for detecting optical radiation by optically monitoring temperature changes in a microvolume caused by absorption of the optical radiation to be detected is described. More specifically, a thermal lens forming material is provided which has first and second opposite, substantially parallel surfaces. A reflective coating is formed on the first surface, and a radiation absorbing coating is formed on the reflective coating. Chopped, incoming optical radiation to be detected is directed to irradiate a small portion of the radiation absorbing coating. Heat generated in this small area is conducted to the lens forming material through the reflective coating, thereby raising the temperature of a small portion of the lens forming material and causing a thermal lens to be formed therein.

Gupta, A.↗
NASA NTRS1984

Broadband water vapor transmission functions for atmospheric IR flux computations

Transmission functions associated with water vapor molecular line and e-type absorption in the IR spectra regions are presented in the form of simple analytical functions and small tables, from which atmospheric IR fluxes and cooling rates can be easily computed. For typical clear atmospheres ranging from the tropics to the subarctic region, the difference with respect to line-by-line calculations is less than 0.15 C/day in the cooling rate and approximately equal to or less than 1 percent in fluxes.

Chou, M.-D.↗
DOE OSTI2024

Search for New Physics with the Compact Muon Solenoid Experiment and QIS-enabled Technology

Understanding the fundamental nature of dark matter (DM)---its cosmological origin, constituents, and interactions---is one of the most important questions in fundamental science today. In this thesis, I present two novel and highly complementary approaches to cover the gaps in sensitivity of current DM searches. The searches are enabled by a first-of-its-kind reconstruction technique to search for hidden-sector particles using the Compact Muon Solenoid (CMS) and by new advances in quantum sensing technology to search for axions and hidden-sector DM. In the first part of this thesis, I present a search for long-lived hidden sector particles, predicted by many extensions of the SM, using a novel technique to reconstruct decays of long-lived particles (LLPs) in the CMS muon detector. The innovative LLP reconstruction technique is sensitive to a broad range of LLP decays and to LLP masses below GeV. The search yields competitive sensitivity for proper lifetime 0.1--1000 m with the full Run 2 dataset recorded at the LHC between 2016--2018 at $\sqrt{s} = 13~$TeV. To extend the physics reach of this novel muon detector shower (MDS) signature, I present the model-independence of MDS and the reinterpretation of the search to a large number of LLP models, demonstrating its complementarity with proposed and existing dedicated LLP experiments. Finally, I present a new dedicated MDS trigger that improves the trigger efficiency by at least an order of magnitude and was deployed in 2022, at the start of Run 3 of the LHC operations. In the second part of the thesis, I present for the first time, the use of a novel quantum sensor, the low-noise and single-photon sensitive superconducting nanowire single photon detectors (SNSPDs), to directly detect dark matter. The low detection threshold and ultra-low dark count rate of SNSPDs can close the gap in DM discovery reach due to the current limitations in detector sensitivity. I will present my work on the development and characterization of SNSPDs for two entirely new experiments to directly detect axions via absorption and hidden-sector DM via electron scattering. The search for axions employs a novel broadband reflector technique with the Broadband Reflector Experiment for Axion Detection (BREAD). A unique parabolic mirror is then used to focus axion-converted photons to the SNSPDs, extending the reach to axion masses of 0.04--1 eV. On the other hand, by coupling the SNSPDs with gallium arsenide, a bright cryogenic scintillator well matched to SNSPD detection, a prototype sensing system can be built as a basis of new direct DM detection experiments capable of extending the discovery to DM masses as low as 1 MeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1992

An interpretation of the spectral properties of hot hydrogen-rich white dwarfs with stratified H/He model atmospheres

A grid of stratified H/He model atmospheres applicable to the interpretation of the spectral properties of hot H-rich white dwarfs (WDs) is computed. Samples of hot DA WDs observed with Exosat and Einstein are analyzed using the models. Six out of six objects with T(eff) = 35,000 K or less do not show a EUV/soft X-ray flux deficiency and therefore can be understood solely in terms of pure hydrogen atmospheres. A majority of DA WDs hotter than this value do show a flux deficiency and thus require the presence of some absorbers in their atmospheres. It is shown that the Exosat broadband photometry of Feige 24 and G191 B2B cannot be explained in terms of stratified atmospheres. Absorption by heavy elements is certainly responsible for the required EUV/soft X-ray opacity source in these cases. However, the Exosat data are consistent with the hypothesis of stratified atmospheres in the four remaining objects.

Vennes, Stephane↗
NASA NTRS2022

Modeling Broadband Phase Noise from Extended Targets in a 170 GHz Cloud-Imaging Radar

VIPR (Vapor Inside-cloud Profiling Radar) is a differential absorption radar operating over 155-175 GHz, covering a portion of the lower frequency flank of the 183 GHz water vapor absorption resonance. Transmitting at a ~1.9 mm wavelength, VIPR is highly sensitive to scattering from small particles comprising clouds and precipitation. Variation of VIPR’s cloud and precipitation echo power with frequency is often dominated by water vapor absorption, allowing humidity profiles to be retrieved along the radar’s beam path. One confounding effect in practical measurements is phase noise carried by the radar’s transmit signal, which can result in strong range sidelobes extending from bright targets and obscuring the echo signals of more weakly scattering clouds. Here we show that the magnitude and shape of phase-noise induced clutter from extended, bright cloud signals can be accurately modeled using a combination of empirical measurements of surface-echo phase noise and an analytic model based on the phase-noise sidelobe magnitude from a theoretical point target. This improved understanding of a potential clutter source in millimeter-wave imagine radar can lead to better performance modeling, and it provides motivation to improve the phase noise of very high frequency local oscillators.

Cooper, Ken B.↗
DOE OSTI2023

Broadband Photoconductive Sampling in Gallium Phosphide

Abstract Direct measurements of the electric field of light enable new observations of light–matter interactions. In the near‐infrared and visible spectral ranges, this typically relies on techniques that exploit nonlinearities in gases or solids, which limits their sensitivity. Here, a method for the detection of broadband near‐infrared fields spanning more than one octave from 110 to 220 THz based on linear absorption in a semiconductor is demonstrated. This technique, which avoids complex vacuum setups and works under ambient conditions, employs linear photoconductive sampling (LPS) in gallium phosphide. Simulations reveal that the response function of LPS is concerned with the intensity envelope of the gate field, in contrast to electro‐optic sampling, relaxing the stringent temporal requirements on the gate pulse.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Development and Validation of an Interactive Liner Design and Impedance Modeling Tool

The Interactive Liner Impedance Analysis and Design (ILIAD) tool is a LabVIEW-based software package used to design the composite surface impedance of a series of small-diameter quarter-wavelength resonators incorporating variable depth and sharp bends. Such structures are useful for packaging broadband acoustic liners into constrained spaces for turbofan engine noise control applications. ILIAD s graphical user interface allows the acoustic channel geometry to be drawn in the liner volume while the surface impedance and absorption coefficient calculations are updated in real-time. A one-dimensional transmission line model serves as the basis for the impedance calculation and can be applied to many liner configurations. Experimentally, tonal and broadband acoustic data were acquired in the NASA Langley Normal Incidence Tube over the frequency range of 500 to 3000 Hz at 120 and 140 dB SPL. Normalized impedance spectra were measured using the Two-Microphone Method for the various combinations of channel configurations. Comparisons between the computed and measured impedances show excellent agreement for broadband liners comprised of multiple, variable-depth channels. The software can be used to design arrays of resonators that can be packaged into complex geometries heretofore unsuitable for effective acoustic treatment.

Howerton, Brian M.↗
NASA NTRS1994

10-micrometers images and spectra of T Tauri stars

T Tauri stars are young stars usually surrounded by dusty disks similar to the one from which we believe our own Solar System formed. Most T Tauri stars exhibit a broad emission or absorption band between 7.5 and 13.5 micrometers which is attributed to silicate grains in the circumstellar environment. We imaged three spatially resolved T Tauri binaries through a set of broadband filters which include the spectral region occupied by the silicate band. Two of these objects (T Tauri and Haro 6-10) are 'infrared companion' systems in which one component is optically much fainter but contributes strongly in the infrared. Both infrared companions exhibit a deep silicate absorption which is not present in their primaries, indicating that they suffer very strong local extinction whigh may be due to an edge-on circumstellar disk or to a dense shell. We also took low resolution spectra of the silicate feature of two unresolved T Tauris to look for narrow features in the silicate band which would indicate the presence of specific minerals such as olivine. We observed GK Tau, for which Cohen and Witteborn (1985) reported a narrow emission feature at 9.7 micrometers, but do not find evidence for this feature, and conclude that it is either time-dependent or an artifact of absorption by telluric ozone.

Van Cleve, J. E.↗
NASA NTRS1991

A study of the radiative effects of the 9.4- and 10.4-micron bands of carbon dioxide

The potential radiative impact of the relatively weak 9.4- and 10.4-micron bands of CO2 is investigated. A comparison of line-by-line calculations to laboratory data demonstrates that the line-by-line procedure and laboratory data typically yield comparable results; however, there are cases of substantial disagreement between the line-by-line results and the laboratory data. It is observed that the Goody narrow-band model yields band absorptances in good agreement with the reference line-by-line calculations. For application to climate models, new broadband parameterizations, are presented for the 9.4- and 10.4-micron bands of CO2. Clear-sky flux calculations demonstrate that for projected increases of CO2 the impact of the 9.4- and 10.4-micron bands is comparable to that attributed to projected increases of tropospheric ozone.

Kratz, D. P.↗
NASA NTRS2016

Differences in Water Vapor Radiative Transfer Among 1D Models Can Significantly Affect the Inner Edge of the Habitable Zone

An accurate estimate of the inner edge of the habitable zone is critical for determining which exoplanets are potentially habitable and for designing future telescopes to observe them. Here, we explore differences in estimating the inner edge among seven one-dimensional radiative transfer models: two line-by-line codes (SMART and LBLRTM) as well as five band codes (CAM3, CAM4_Wolf, LMDG, SBDART, and AM2) that are currently being used in global climate models. We compare radiative fluxes and spectra in clear-sky conditions around G and M stars, with fixed moist adiabatic profiles for surface temperatures from 250 to 360 K. We find that divergences among the models arise mainly from large uncertainties in water vapor absorption in the window region (10 μm) and in the region between 0.2 and 1.5 μm. Differences in outgoing longwave radiation increase with surface temperature and reach 10–20Wm(exp −2); differences in shortwave reach up to 60 Wm(exp −2), especially at the surface and in the troposphere, and are larger for an M-dwarf spectrum than a solar spectrum. Differences between the two line-by-line models are significant, although smaller than among the band models. Our results imply that the uncertainty in estimating the insolation threshold of the inner edge (the runaway greenhouse limit) due only to clear-sky radiative transfer is ≈10% of modern Earth’s solar constant (i.e., ≈34 Wm(exp −2) in global mean) among band models and ≈3% between the two line-by-line models. These comparisons show that future work is needed that focuses on improving water vapor absorption coefficients in both shortwave and longwave, as well as on increasing the resolution of stellar spectra in broadband models.

Numerical methods↗
DOE OSTI2021

A temperature profile diagnostic for radiation waves on OMEGA-60

Predicting and matching radiation wave propagation with computational models has proven difficult. Information provided by experiments studying radiation flow has been limited when only radiation breakout is measured. We have developed the COAX (co-axial) diagnostic platform to provide spatial temperature profiles of a radiation wave through low density foams as a more detailed constraint for simulations. COAX uses a standard, laser-driven OMEGA-60 halfraum to drive radiation down a titanium-laden silicon oxide foam. Point-projection X-ray absorption spectroscopy perpendicular to the radiation flow measures the spatial profile of titanium ionization. The spectroscopic measurement utilizes a broadband capsule backlighter. Imaging and streak spectroscopy are used to characterize the size and spectrum of this source. Radiography provides an additional constraint by capturing the developing shock as the radiation flow becomes subsonic. The DANTE diagnostic is used to measure the halfraum temperature. Here, we provide a spectroscopic analysis of COAX data to determine temperature, and we describe experimental sources of uncertainty. The temperature is obtained by comparison to multi-temperature synthetic spectra post-processed from radiation-hydrodynamics simulations. Quantitative comparison between data and synthetic spectra generated from temperature profiles at relevant simulation times enable determination of a peak temperature of 114 ± 8 eV at 265 ± 22.4 μm from the halfraum. This represents an improvement over the temperature uncertainties of previous radiation flow experiments. Further refinements to the spectroscopic analysis could achieve ±4 eV. The combination between space-resolved spectroscopy and radiography enables us to determine the distance from the halfraum of both the radiation front and the shock front at the time of measurement. For the example shown in this paper the radiation front position is 600–630 μm at 3.43 ± 0.16 ns and the shock front position is 633 μm at 3.3 ± 0.24 ns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Broadband Plasmonic Photocurrent Enhancement from Photosystem I Assembled with Tailored Arrays of Au and Ag Nanodisks

Plasmonic interactions between metal nanostructures and fluorophores have been increasingly employed to alter photoexcitation pathways in multichromophore photosynthetic proteins like photosystem I (PSI). Our recent experimental studies demonstrated a sixfold plasmon-enhanced photocurrent from PSI assembled on Fischer patterns of Ag nanopyramids. However, lack of control over the specific resonance modes limited the magnitude and selectivity of the plasmonic enhancement. To this end, the present study investigates the excitation wavelength-dependent plasmon-enhanced photocurrents from PSI immobilized around highly ordered Au (AuND) and Ag (AgND) nanodisks with dipolar plasmon resonances that are tuned to ~680 and 560 nm, respectively. Specifically, we report plasmon-induced photocurrent enhancements of ~6.8 and 17.5 for excitation wavelengths of ~680 and 565 nm, respectively, as compared to PSI assembled on planar ITO substrates. We also report the action spectra for photocurrent enhancements recorded over wavelengths of 395–810 nm with nine discrete LED light sources. The results indicate the following: (1) concurrence between the photocurrent-enhancement spectra from PSI assemblies and the plasmonic resonances for the respective nanopatterned substrates, and (2) broadband photocurrent enhancements due to plasmon-coupled photoactivation in the otherwise blind chlorophyll regions of the native PSI absorption spectra. Lastly, these intriguing findings pave the path for rational assembly of future biohybrid structures composed of natural light-harvesting antennae and plasmonic metal nanostructures.

36 MATERIALS SCIENCE↗