Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Exploring Cd-Zn-O-S alloys for improved buffer layers in thin-film photovoltaics

Here, to compete with existing and more mature solar cell technologies such as crystalline Si, thin-film photovoltaics require optimization of every aspect in the device heterostructure to reach maximum efficiencies and cost effectiveness. For absorbers like CdTe, Cu(In,Ga)Se 2 (CIGSe), and Cu 2 ZnSn(S,Se) 4 (CZTSSe), improving the n-type buffer layer partner beyond conventional CdS is one avenue that can reduce photocurrent losses and improve overall performance. Here, we use first-principles calculations based on hybrid functionals to explore alloys spanning the Cd-, Zn-, O-, and S-containing phase space to identify compositions that may be superior to common buffers like pure CdS or Zn(O,S). We address issues highly correlated with device performance such as lattice-matching for improved buffer-absorber epitaxy and interface quality, dopability, the band gap for reduced absorption losses in the buffer, and the conduction-band offsets shown to facilitate improved charge separation from photoexcited carriers. We supplement our analysis with device-level simulations as parameterized from our calculations and real devices to assess our conclusions of low-Zn and O content buffers showing improved performance with respect to CdS buffers.

14 SOLAR ENERGY↗

Formation of a strontium buffer layer on Si(001) by pulsed-laser deposition through the Sr/Si(001)(2 × 3) surface reconstruction

The formation of a ½ monolayer (ML) of strontium (Sr) on Si(001) represents the most widely used and effective passivation procedure for the epitaxial growth of strontium titanate (SrTiO{sub 3}) on Si with molecular beam epitaxy (MBE). In the present study, we demonstrate experimentally the possibility of preparing such a buffer layer with the pulsed-laser deposition (PLD) technique. In-situ analysis using reflection high-energy electron diffraction (RHEED) showed surface structure evolution from two-domain (2 × 1) + (1 × 2), exhibited by the bare silicon surface, to a (3 × 2) + (2 × 3) structure at 1/6 ML Sr coverage, which is then replaced by (1 × 2) + (2 × 1) structure at ¼ ML and maintained up to ½ ML coverage. In addition, two different processes for the removal of native silicon dioxide (SiO{sub 2}) layer were studied: thermal and Sr-induced deoxidation process. Annealing above 1100 °C proved to be the most efficient in terms of carbon contamination. The results highlight the possibilities of using the PLD technique for the synthesis of an epitaxial SrTiO{sub 3} layer on Si, needed for the integration of different functional oxides with a Si platform.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Production PVD-AIN Buffer Layer System and Processes to Reduce Epitaxy Costs and Increase LED Efficiency (Final Scientific/Technical Report)

The DOE has set aggressive goals for solid state lighting (SSL) adoption, which require manufacturing and quality improvements for virtually all process steps leading to an LED luminaire product. The goals pertinent to this proposed project are to reduce the cost and improve the quality of the epitaxial growth processes used to build LED structures. The objectives outlined in this proposal focus on achieving cost reduction and performance improvements over state-of-the-art, using technologies that are low in cost and amenable to high efficiency manufacturing. The objectives of the outlined proposal focus on cost reductions in epitaxial growth by reducing epitaxy layer thickness and hetero-epitaxial strain, and by enabling the use of larger, less expensive silicon substrates and would be accomplished through the introduction of a high productivity reactive sputtering system and an effective sputtered aluminum-nitride (AlN) buffer/nucleation layer process. Success of the proposed project could enable efficient adoption of GaN on-silicon (GaN/Si) epitaxial technology on 150mm silicon substrates. The reduction in epitaxy cost per cm 2 using 150mm GaN-on-Si technology derives from (1) a reduction in cost of ownership and increase in throughput for the buffer deposition process via the elimination of MOCVD buffer layers and other throughput and CoO enhancements, (2) improvement in brightness through reductions in defect density, (3) reduction in substrate cost through the replacement of sapphire with silicon, and (4) reduction in non-ESD yield loss through reductions in wafer bow and temperature variation. The adoption of 150mm GaN/Si processing will also facilitate significant cost reductions in subsequent wafer fabrication manufacturing costs. There were three phases to this project. These three phases overlap in order to aggressively facilitate a commercially available production GaN/Si capability. In Phase I of the project, the repeatability of the performance was analyzed and improvements implemented to the Veeco PVD-AlN prototype system to establish a specification and baseline PVD-AlN films on sapphire and in parallel the evaluation of PVD AlN on silicon substrates began. In Phase II of the project a Beta tool based on a scaled-up process module capable of depositing uniform films on batches of 4” or 6” diameter substrates in a production worthy operation was developed and qualified. In Phase III, the means to increase the throughput of the PVD-AlN sy0stem was evaluated and focused primarily on minimizing the impact of the substrate heating and cooling times that dominated the overall cycle time.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ambient CdCl{sub 2} treatment on CdS buffer layer for improved performance of Sb{sub 2}Se{sub 3} thin film photovoltaics

Antimony selenide (Sb{sub 2}Se{sub 3}) is appealing as a promising light absorber because of its intrinsically benign grain boundaries, suitable band gap (∼1.1 eV), strong absorption coefficient, and relatively environmentally friendly constituents. Recently, we achieved a certified 5.6% efficiency Sb{sub 2}Se{sub 3} thin film solar cell with the assistance of ambient CdCl{sub 2} treatment on the CdS buffer layer. Here, we focused on investigating the underlying mechanism from a combined materials and device physics perspective applying current density-voltage (J-V) fitting analysis, atomic force microscope, X-ray photoelectron spectroscopy, fluorescence, and UV–Vis transmission spectroscopy. Our results indicated that ambient CdCl{sub 2} treatment on CdS film not only improved CdS grain size and quality, but also incorporated Cl and more O into the film, both of which can significantly improve the heterojunction quality and device performance of CdS/Sb{sub 2}Se{sub 3} solar cells.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy growth of SrO buffer layers on graphite and graphene for the integration of complex oxides

Here, we report the successful growth of high-quality SrO films on highly-ordered pyrolytic graphite (HOPG) and single-layer graphene by molecular beam epitaxy. The SrO layers have (001) orientation as confirmed by X-ray diffraction (XRD) while atomic force microscopy measurements show continuous pinhole-free films having rms surface roughness of <1.5 Å. Moreover, transport measurements of exfoliated graphene, after SrO deposition, show a strong dependence between the Dirac point and Sr oxidation. As a result, the SrO is leveraged as a buffer layer for more complex oxide integration via the demonstration of (001) oriented SrTiO3 grown atop a SrO/HOPG stack.

36 MATERIALS SCIENCE↗

Damage free laser ablation of SiO{sub 2} for local contact opening on silicon solar cells using an a-Si:H buffer layer

We have used a Q-switched Nd:YVO{sub 4}, diode pumped 532 nm laser with nanosecond pulses, and a spot diameter of 40 {mu}m to ablate a layer of plasma enhanced chemical vapor deposited (PECVD) SiO{sub 2} on n-type Cz silicon, with the aim of making local contact openings on back-junction silicon solar cells. Laser pulses within the ns range are usually believed to be incompatible with processing of high efficiency solar cells because such long pulses induce too much damage into the underlying silicon lattice. This is due to thermal dissipation. In this work, a PECVD layer of a-Si:H between the n-type silicon and the dielectric layer is shown to absorb much of the laser radiation and allows for ablation at laser fluences lower than the ablation threshold of crystalline silicon. In addition, the a-Si:H layer serves as an excellent surface passivation layer for the silicon substrate. We show that it is possible to ablate PECVD SiO{sub 2} in a damage free way with fluences five times lower than those needed to ablate crystalline Si. Our results are verified experimentally with high resolution transmission electron microscopy of the crystal structure in the laser irradiated areas, and quasi-steady-state photoconductance measurements of emitter saturation currents. In addition, we have simulated the energy transfer from a ns 532 nm Gaussian shaped laser beam to a SiO{sub 2} covered Si lattice with and without the a-Si:H buffer layer. A model that coincides very well with the experiments is found.

36 MATERIALS SCIENCE↗

A nitrilo-tri-acetic-acid/acetic acid route for the deposition of epitaxial cerium oxide films as high temperature superconductor buffer layers

A water based cerium oxide precursor solution using nitrilo-tri-acetic-acid (NTA) and acetic acid as complexing agents is described in detail. This precursor solution is used for the deposition of epitaxial CeO{sub 2} layers on Ni-5at%W substrates by dip-coating. The influence of the complexation behavior on the formation of transparent, homogeneous solutions and gels has been studied. It is found that ethylenediamine plays an important role in the gelification. The growth conditions for cerium oxide films were Ar-5% gas processing atmosphere, a solution concentration level of 0.25 M, a dwell time of 60 min at 900 {sup o}C and 5-30 min at 1050 {sup o}C. X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), pole figures and spectroscopic ellipsometry were used to characterize the CeO{sub 2} films with different thicknesses. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) was used to determine the carbon residue level in the surface of the cerium oxide film, which was found to be lower than 0.01%. Textured films with a thickness of 50 nm were obtained. - Graphical abstract: Study of the complexation and hydrolysis behavior of Ce{sup 4+} ions in the presence of nitrilo-tri-acetic acid and the subsequent development of an aqueous chemical solution deposition route suited for the processing of textured CeO{sub 2} buffer layers on Ni-W tapes.

36 MATERIALS SCIENCE↗

Effect of conductive TiN buffer layer on the growth of stoichiometric VO{sub 2} films and the out-of-plane insulator–metal transition properties

A TiN buffer film is used with a conductive interfacial layer for stoichiometric vanadium dioxide (VO{sub 2}) film growth, creating a layered device with a VO{sub 2} insulator–metal transition. Low-temperature growth (<250 °C) of the VO{sub 2} film on a Ti layer on a Si substrate is achieved using inductively coupled plasma-assisted sputtering. It is found that Ti diffusion and oxidation degrades the VO{sub 2} film quality at higher temperatures, but the introduction of a TiN buffer layer suppresses the degradation and enables growth of a stoichiometric VO{sub 2} film even at 400 °C. The high resistance of the VO{sub 2} film grown on the TiN layer suggests the benefit of using the intrinsic insulator–metal transition of VO{sub 2}. The voltage-triggered switching properties of the layered devices are examined, and the cause of the high out-of-plane resistance in this layered structure is discussed based upon the dependence of the initial resistance as a function the electrode area.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heteroepitaxy of large grain Ge film on cube-textured Ni(001) foils through CaF 2 buffer layer

Cube-textured Ni(001) foils have been considered as a viable alternative substrate to grow high quality functional films for large area optoelectronic devices. Here in this work, we report the heteroepitaxial growth of CaF 2 (001) films on cube-textured Ni(001) foils at 350-600 degrees C with in-plane orientation of CaF 2 [110]//Ni[100] and CaF 2 [$\bar{1}$10]//Ni[010] with 45 degrees rotation respect to the Ni(001) substrate. Unlike CaF2(111)/Ni(001) films where there exist four independent rotational domains with rotational domain boundaries, CaF 2 (001)/Ni(001) contains no rotational domains or rotational domain boundaries. This makes CaF 2 (001)/Ni(001) films better candidates as templates for the growth of high quality functional semiconductors. Lastly, we also demonstrate that Ge(001) film with no rotational domains and with a grain size of ~ 50 μm similar to that of the Ni substrate can be grown on the CaF 2 (001) buffered Ni substrate.

36 MATERIALS SCIENCE↗

Epitaxial Growth of Cadmium Selenide Films on Silicon with a Silicon Carbide Buffer Layer

An epitaxial cubic 350-nm-thick cadmium selenide has been grown on silicon for the first time by the method of evaporation and condensation in a quasi-closed volume. It is revealed that, in this method, the optimum substrate temperature is 590°C, the evaporator temperature is 660°C, and the growth time is 2 s. To avoid silicon etching by selenium with formation of amorphous SiSe{sub 2}, a high-quality ~100-nm-thick buffer silicon carbide layer has been synthesized on the silicon surface by substituting atoms. The powder diffraction pattern and the Raman spectrum unambiguously correspond to cubic cadmium selenide crystal. The ellipsometric, Raman, and electron diffraction analyses demonstrate high structural perfection of the cadmium selenide layer and the absence of a polycrystalline phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen responses of ultrathin Pd films and nanowire networks with a Ti buffer layer.

We report on hydrogen responses of ultrathin films and nanowire networks of palladium on titanium buffered silicon substrates and filtration membranes, respectively. We found that in both systems signatures such as retarding responses and saturation of the resistance changes at high hydrogen concentrations associated with the transition from Pd/H solid solution to Pd hydride diminish with decreasing the thickness of the palladium layer from 7 to 2 nm. Our results not only reveal a new way to suppress the phase transition in Pd/H system but also provide an alternative approach to achieve fast and sensitive hydrogen sensors with a wide concentration detection range.

08 HYDROGEN↗

Effects of the lateral ordering of self-assembled SiGe nanoislands grown on strained Si{sub 1-x}Ge{sub x} buffer layers

Atomic-force microscopy, micro-Raman spectroscopy, and high resolution X-ray diffraction are applied to study the spatial ordering in single layers of SiGe nanoislands grown on a strained Si{sub 1-x}Ge{sub x} buffer sublayer. It is shown that, apart from stimulating the spatial ordering of nanoislands, the introduction of a Si{sub 1-x}Ge{sub x} sublayer leads to an enhanced role for interdiffusion processes. An unusually high increase in the volume of nanoislands in the process of the epitaxy is related to the anomalously strong diffusion from the buffer sublayer into the islands that is induced by nonuniform fields of elastic strains. The anisotropy of the islands shape and spatial ordering is discussed in terms of the anisotropy of the diffusion processes in spatially nonuniform fields of elastic strains.

36 MATERIALS SCIENCE↗

Investigation into the Influence of a Buffer Layer of Nanoporous Silicon on the Atomic and Electronic Structure and Optical Properties of A{sup III}N/por-Si Heterostructures Grown by Plasma-Activated Molecular-Beam Epitaxy

The influence of using a buffer sublayer of nanoporous por-Si on the morphological, physical, and structural properties of nanocolumnar In{sub x}Ga{sub 1 –x}N structures fabricated by plasma-activated molecular-beam epitaxy on single-crystal Si(111) substrates is shown. Using a set of structural-spectroscopic analytical methods, the electronic structure of the grown heterostructures, morphology, and optical properties are investigated, and the interrelations between them are established. It is shown that the use of a por-Si sublayer makes it possible to attain a more uniform distribution of diameters of In{sub x}Ga{sub 1 –x}N nanocolumns and to increase the photoluminescence intensity of the latter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band alignments of different buffer layers (CdS, Zn(O,S), and In{sub 2}S{sub 3}) on Cu{sub 2}ZnSnS{sub 4}

The heterojunctions of different n-type buffers, i.e., CdS, Zn(O,S), and In{sub 2}S{sub 3} on p-type Cu{sub 2}ZnSnS{sub 4} (CZTS) were investigated using X-ray Photoelectron Spectroscopy (XPS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) Measurements. The band alignment of the heterojunctions formed between CZTS and the buffer materials was carefully measured. The XPS data were used to determine the Valence Band Offsets (VBO) of different buffer/CZTS heterojunctions. The Conduction Band Offset (CBO) was calculated indirectly by XPS data and directly measured by NEXAFS characterization. The CBO of the CdS/CZTS heterojunction was found to be cliff-like with CBO{sub XPS} = −0.24 ± 0.10 eV and CBO{sub NEXAFS} = −0.18 ± 0.10 eV, whereas those of Zn(O,S) and In{sub 2}S{sub 3} were found to be spike-like with CBO{sub XPS} = 0.92 ± 0.10 eV and CBO{sub NEXAFS} = 0.87 ± 0.10 eV for Zn(O,S)/CZTS and CBO{sub XPS} = 0.41 ± 0.10 eV for In{sub 2}S{sub 3}/CZTS, respectively. The CZTS photovoltaic device using the spike-like In{sub 2}S{sub 3} buffer was found to yield a higher open circuit voltage (Voc) than that using the cliff-like CdS buffer. However, the CBO of In{sub 2}S{sub 3}/CZTS is slightly higher than the optimum level and thus acts to block the flow of light-generated electrons, significantly reducing the short circuit current (Jsc) and Fill Factor (FF) and thereby limiting the efficiency. Instead, the use of a hybrid buffer for optimization of band alignment is proposed.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films integrated onto Si(100) substrates with SrTiO{sub 3} as buffer layer

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) thin films with a thickness d of 10, 20, 60, and 100 nm were grown on 20-nm-thick SrTiO{sub 3}-buffered (100) silicon substrates by a reactive molecular beam epitaxy. For all samples, x-ray diffraction (XRD) revealed an excellent epitaxy with in-plane cubic [100] and [010] axes of LSMO. The XRD measured values of the out-of-plane lattice parameter suggest that the strain state does not vary significantly from sample to sample. A super conducting quantum interference device reveals that the room temperature magnetization at saturation increases with d and nearly reaches the bulk value for d = 100 nm; the Curie temperature ranges in the 320-350 K interval, to compare to 360 K in the bulk. Ferromagnetic resonance (FMR) in cavity (at 9.5 GHz) and microstrip FMR used to investigate the dynamic magnetic properties, revealed a fourfold anisotropy showing its easy axes along the [110] and [110] directions. In the thickest samples (d > 20 nm), the FMR spectra present two distinct resonant modes. This splitting is presumably due to the simultaneous presence of two different magnetic phases.

36 MATERIALS SCIENCE↗

Zero lattice mismatch and twin-free single crystalline ScN buffer layers for GaN growth on silicon

We report the growth of thin ScN layers deposited by plasma-assisted molecular beam epitaxy on Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111) substrates. Using x-ray diffraction, Raman spectroscopy, and transmission electron microscopy, we find that ScN films grown at 600 °C are single crystalline, twin-free with rock-salt crystal structure, and exhibit a direct optical band gap of 2.2 eV. A high degree of crystalline perfection and a very good lattice matching between ScN and GaN (misfit < 0.1%) makes the ScN/Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3} buffer system a very promising template for the growth of high quality GaN layers on silicon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The appearance of Ti{sup 3+} states in solution-processed TiO{sub x} buffer layers in inverted organic photovoltaics

We study the low-temperature solution processed TiO{sub x} films and device structures using core level and valence X-ray photoelectron spectroscopy (XPS) and electronic structure calculations. We are able to correlate the fraction of Ti{sup 3+} present as obtained from Ti 2p core level XPS with the intensity of the defect states that appear within the band gap as observed with our valence XPS. Constructing an operating inverted organic photovoltaic (OPV) using the TiO{sub x} film as an electron selective contact may increase the fraction of Ti{sup 3+} present. We provide evidence that the number of charge carriers in TiO{sub x} can be significantly varied and this might influence the performance of inverted OPVs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗