Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Effect of conductive TiN buffer layer on the growth of stoichiometric VO{sub 2} films and the out-of-plane insulator–metal transition properties

A TiN buffer film is used with a conductive interfacial layer for stoichiometric vanadium dioxide (VO{sub 2}) film growth, creating a layered device with a VO{sub 2} insulator–metal transition. Low-temperature growth (<250 °C) of the VO{sub 2} film on a Ti layer on a Si substrate is achieved using inductively coupled plasma-assisted sputtering. It is found that Ti diffusion and oxidation degrades the VO{sub 2} film quality at higher temperatures, but the introduction of a TiN buffer layer suppresses the degradation and enables growth of a stoichiometric VO{sub 2} film even at 400 °C. The high resistance of the VO{sub 2} film grown on the TiN layer suggests the benefit of using the intrinsic insulator–metal transition of VO{sub 2}. The voltage-triggered switching properties of the layered devices are examined, and the cause of the high out-of-plane resistance in this layered structure is discussed based upon the dependence of the initial resistance as a function the electrode area.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heteroepitaxy of large grain Ge film on cube-textured Ni(001) foils through CaF 2 buffer layer

Cube-textured Ni(001) foils have been considered as a viable alternative substrate to grow high quality functional films for large area optoelectronic devices. Here in this work, we report the heteroepitaxial growth of CaF 2 (001) films on cube-textured Ni(001) foils at 350-600 degrees C with in-plane orientation of CaF 2 [110]//Ni[100] and CaF 2 [$\bar{1}$10]//Ni[010] with 45 degrees rotation respect to the Ni(001) substrate. Unlike CaF2(111)/Ni(001) films where there exist four independent rotational domains with rotational domain boundaries, CaF 2 (001)/Ni(001) contains no rotational domains or rotational domain boundaries. This makes CaF 2 (001)/Ni(001) films better candidates as templates for the growth of high quality functional semiconductors. Lastly, we also demonstrate that Ge(001) film with no rotational domains and with a grain size of ~ 50 μm similar to that of the Ni substrate can be grown on the CaF 2 (001) buffered Ni substrate.

36 MATERIALS SCIENCE↗

Epitaxial Growth of Cadmium Selenide Films on Silicon with a Silicon Carbide Buffer Layer

An epitaxial cubic 350-nm-thick cadmium selenide has been grown on silicon for the first time by the method of evaporation and condensation in a quasi-closed volume. It is revealed that, in this method, the optimum substrate temperature is 590°C, the evaporator temperature is 660°C, and the growth time is 2 s. To avoid silicon etching by selenium with formation of amorphous SiSe{sub 2}, a high-quality ~100-nm-thick buffer silicon carbide layer has been synthesized on the silicon surface by substituting atoms. The powder diffraction pattern and the Raman spectrum unambiguously correspond to cubic cadmium selenide crystal. The ellipsometric, Raman, and electron diffraction analyses demonstrate high structural perfection of the cadmium selenide layer and the absence of a polycrystalline phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen responses of ultrathin Pd films and nanowire networks with a Ti buffer layer.

We report on hydrogen responses of ultrathin films and nanowire networks of palladium on titanium buffered silicon substrates and filtration membranes, respectively. We found that in both systems signatures such as retarding responses and saturation of the resistance changes at high hydrogen concentrations associated with the transition from Pd/H solid solution to Pd hydride diminish with decreasing the thickness of the palladium layer from 7 to 2 nm. Our results not only reveal a new way to suppress the phase transition in Pd/H system but also provide an alternative approach to achieve fast and sensitive hydrogen sensors with a wide concentration detection range.

08 HYDROGEN↗

Effects of the lateral ordering of self-assembled SiGe nanoislands grown on strained Si{sub 1-x}Ge{sub x} buffer layers

Atomic-force microscopy, micro-Raman spectroscopy, and high resolution X-ray diffraction are applied to study the spatial ordering in single layers of SiGe nanoislands grown on a strained Si{sub 1-x}Ge{sub x} buffer sublayer. It is shown that, apart from stimulating the spatial ordering of nanoislands, the introduction of a Si{sub 1-x}Ge{sub x} sublayer leads to an enhanced role for interdiffusion processes. An unusually high increase in the volume of nanoislands in the process of the epitaxy is related to the anomalously strong diffusion from the buffer sublayer into the islands that is induced by nonuniform fields of elastic strains. The anisotropy of the islands shape and spatial ordering is discussed in terms of the anisotropy of the diffusion processes in spatially nonuniform fields of elastic strains.

36 MATERIALS SCIENCE↗

Investigation into the Influence of a Buffer Layer of Nanoporous Silicon on the Atomic and Electronic Structure and Optical Properties of A{sup III}N/por-Si Heterostructures Grown by Plasma-Activated Molecular-Beam Epitaxy

The influence of using a buffer sublayer of nanoporous por-Si on the morphological, physical, and structural properties of nanocolumnar In{sub x}Ga{sub 1 –x}N structures fabricated by plasma-activated molecular-beam epitaxy on single-crystal Si(111) substrates is shown. Using a set of structural-spectroscopic analytical methods, the electronic structure of the grown heterostructures, morphology, and optical properties are investigated, and the interrelations between them are established. It is shown that the use of a por-Si sublayer makes it possible to attain a more uniform distribution of diameters of In{sub x}Ga{sub 1 –x}N nanocolumns and to increase the photoluminescence intensity of the latter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band alignments of different buffer layers (CdS, Zn(O,S), and In{sub 2}S{sub 3}) on Cu{sub 2}ZnSnS{sub 4}

The heterojunctions of different n-type buffers, i.e., CdS, Zn(O,S), and In{sub 2}S{sub 3} on p-type Cu{sub 2}ZnSnS{sub 4} (CZTS) were investigated using X-ray Photoelectron Spectroscopy (XPS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) Measurements. The band alignment of the heterojunctions formed between CZTS and the buffer materials was carefully measured. The XPS data were used to determine the Valence Band Offsets (VBO) of different buffer/CZTS heterojunctions. The Conduction Band Offset (CBO) was calculated indirectly by XPS data and directly measured by NEXAFS characterization. The CBO of the CdS/CZTS heterojunction was found to be cliff-like with CBO{sub XPS} = −0.24 ± 0.10 eV and CBO{sub NEXAFS} = −0.18 ± 0.10 eV, whereas those of Zn(O,S) and In{sub 2}S{sub 3} were found to be spike-like with CBO{sub XPS} = 0.92 ± 0.10 eV and CBO{sub NEXAFS} = 0.87 ± 0.10 eV for Zn(O,S)/CZTS and CBO{sub XPS} = 0.41 ± 0.10 eV for In{sub 2}S{sub 3}/CZTS, respectively. The CZTS photovoltaic device using the spike-like In{sub 2}S{sub 3} buffer was found to yield a higher open circuit voltage (Voc) than that using the cliff-like CdS buffer. However, the CBO of In{sub 2}S{sub 3}/CZTS is slightly higher than the optimum level and thus acts to block the flow of light-generated electrons, significantly reducing the short circuit current (Jsc) and Fill Factor (FF) and thereby limiting the efficiency. Instead, the use of a hybrid buffer for optimization of band alignment is proposed.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films integrated onto Si(100) substrates with SrTiO{sub 3} as buffer layer

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) thin films with a thickness d of 10, 20, 60, and 100 nm were grown on 20-nm-thick SrTiO{sub 3}-buffered (100) silicon substrates by a reactive molecular beam epitaxy. For all samples, x-ray diffraction (XRD) revealed an excellent epitaxy with in-plane cubic [100] and [010] axes of LSMO. The XRD measured values of the out-of-plane lattice parameter suggest that the strain state does not vary significantly from sample to sample. A super conducting quantum interference device reveals that the room temperature magnetization at saturation increases with d and nearly reaches the bulk value for d = 100 nm; the Curie temperature ranges in the 320-350 K interval, to compare to 360 K in the bulk. Ferromagnetic resonance (FMR) in cavity (at 9.5 GHz) and microstrip FMR used to investigate the dynamic magnetic properties, revealed a fourfold anisotropy showing its easy axes along the [110] and [110] directions. In the thickest samples (d > 20 nm), the FMR spectra present two distinct resonant modes. This splitting is presumably due to the simultaneous presence of two different magnetic phases.

36 MATERIALS SCIENCE↗

Zero lattice mismatch and twin-free single crystalline ScN buffer layers for GaN growth on silicon

We report the growth of thin ScN layers deposited by plasma-assisted molecular beam epitaxy on Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111) substrates. Using x-ray diffraction, Raman spectroscopy, and transmission electron microscopy, we find that ScN films grown at 600 °C are single crystalline, twin-free with rock-salt crystal structure, and exhibit a direct optical band gap of 2.2 eV. A high degree of crystalline perfection and a very good lattice matching between ScN and GaN (misfit < 0.1%) makes the ScN/Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3} buffer system a very promising template for the growth of high quality GaN layers on silicon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The appearance of Ti{sup 3+} states in solution-processed TiO{sub x} buffer layers in inverted organic photovoltaics

We study the low-temperature solution processed TiO{sub x} films and device structures using core level and valence X-ray photoelectron spectroscopy (XPS) and electronic structure calculations. We are able to correlate the fraction of Ti{sup 3+} present as obtained from Ti 2p core level XPS with the intensity of the defect states that appear within the band gap as observed with our valence XPS. Constructing an operating inverted organic photovoltaic (OPV) using the TiO{sub x} film as an electron selective contact may increase the fraction of Ti{sup 3+} present. We provide evidence that the number of charge carriers in TiO{sub x} can be significantly varied and this might influence the performance of inverted OPVs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxy of CdTe on sapphire substrates with titanium buffer layers

The formation of a developed electrical relief on the sapphire substrate surface is investigated. A technique is proposed for introducing Ti{sup 4+} impurity atoms into the sapphire crystal lattice by depositing titanium layers with a thickness of about 5 nm and their annealing in air (oxidizing atmosphere) to a temperature of 1400°C. It is shown that this preliminary treatment of the sapphire substrate surface results in epitaxial growth of (111) СdTe films parallel to the sapphire (0001) plane at a temperature of 350°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The behavior of off-state stress-induced electrons trapped at the buffer layer in AlGaN/GaN heterostructure field effect transistors

A measurement methodology involving the synchronous switching of gate to source voltage and drain to source voltage (V{sub DS}) was proposed for determining the shift of threshold voltage after an AlGaN/GaN heterostructure transistor endures high V{sub DS} off-state stress. The measurement results indicated slow electron detrapping behavior. The trap level was determined as (E{sub C} – 0.6 eV). Simulation tool was used to analyze the measurement results. The simulation results were consistent with the experimental results; and a relationship between the buffer trap and threshold voltage shift over time was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the electron injection barrier between Co and C{sub 60} using Alq{sub 3} buffer layer

We demonstrate that the electron injection barrier ({Delta}{sub e}) between Co and C{sub 60} can be tuned by inserting a thin Alq{sub 3} interlayer. Using ultraviolet photoemission spectroscopy, {Delta}{sub e} of C{sub 60} on Alq{sub 3}-predecorated Co ({Delta}{sub e}=0.3 eV) was found to be reduced by 0.3 eV compared with that of C{sub 60} deposited directly on the bare Co metal surface ({Delta}{sub e}=0.6 eV). Due to Fermi level pining at the Alq{sub 3}/Co interface, this tuning effect is independent of the thickness of Alq{sub 3} interlayer from multilayer to monolayer. Based on the experimental results, band level alignment diagrams are proposed for C{sub 60}/Co and C{sub 60}/Alq{sub 3}/Co interfaces with two different Alq{sub 3} thicknesses. Our findings could have potential applications for the reduction in the carrier injection barrier in organic spin valves.

36 MATERIALS SCIENCE↗

buffer Layer Growth, the Thickness Dependence of Jc in Coated Conductors, Local Identification of Current Limiting Mechanisms and Participation in the Wire Development Group

The primary thrusts of our work were to provide critical understanding of how best to enhance the current-carrying capacity of coated conductors. These include the deconstruction of Jc as a function of fim thickness, the growth of in situ films incorporating strong pinning centers and the use of a suite of position-sensitive tools that enable location and analysis of key areas where current-limiting occurs.

36 MATERIALS SCIENCE↗