Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Ultra-Efficient Engine Technology Project Continued to Contribute to Breakthrough Technologies

The International Civil Aviation Organization (ICAO), the U.S. Environmental Protection Agency (EPA), local environmental groups, and the public have become increasingly concerned over damage to local air quality from aircraft emissions and the impact of producing greenhouse gases. The NASA Glenn Research Center has been working to develop revolutionary technologies to minimize environmentally harmful engine emissions, such as nitrogen oxides, carbon dioxide, aerosols, and particulates. The two objectives of UEET are (1) to develop technologies to reduce nitrogen oxide (NOx) emissions by 70 percent below 1996 ICAO regulations and (2) to decrease carbon dioxide emissions (CO2) by dramatically increasing performance and efficiency. High temperature engine materials, ultra-low-NOx combustor designs, efficient, highly loaded turbomachinery, and propulsion-airframe integration analysis are technologies being developed at Glenn to meet these goals. Technology developed in the previous Advanced Subsonic Technology Program is being put into commercial production for large and regional aircraft to reduce NOx emissions 50 percent below 1996 ICAO regulations for landing and takeoff cycles. UEET will take the technology to the next quantum leap-reducing emissions to 70 percent below the ICAO regulations level. In addition, NASA-developed research will significantly reduce carbon monoxide, unburned hydrocarbons, and corresponding cruise NOx levels for the next generation of aircraft engines. Glenn's UEET research will be useful across the whole range of flight: subsonic, supersonic, and hypersonic. It will improve the subsonic transportation that the public depends on, contribute to supersonic commercial aircraft, improve military aircraft, and contribute to the design of a future hypersonic vehicle. These technologies are contributing to a better quality of life on Earth.

Shaw, Robert J.↗
NASA NTRS2010

Functionalization of Single-Wall Carbon Nanotubes by Photo-Oxidation

new technique for carbon nanotube oxidation was developed based upon the photo-oxidation of organic compounds. The resulting method is more benign than conventional oxidation approaches and produces single-wall carbon nanotubes (SWCNTs) with higher levels of oxidation. In this procedure, an oxygen saturated suspension of SWNTs in a suitable solvent containing a singlet oxygen sensitizer, such as Rose Bengal, is irradiated with ultraviolet light. The resulting oxidized tubes are recovered by filtering the suspension, followed by washing to remove any adsorbed solvent and sensitizer, and drying in a vacuum oven. Chemical analysis by FT-infrared and x-ray photoelectron spectroscopy revealed that the oxygen content of the photo-oxidized SWCNT was 11.3 atomic % compared to 6.7 atomic % for SWCNT that had been oxidized by standard treatment in refluxing acid. The photo-oxidized SWCNT produced by this method can be used directly in various polymer matrixes, or can be further modified by chemical reactions at the oxygen functional groups and then used as additives. This method may also be suitable for use in oxidation of multiwall carbon nanotubes and graphenes.

Lebron-Colon, Marisabel↗
NASA NTRS1992

Current research in oxidation-resistant carbon-carbon composites at NASA. Langley Research Center

The significant potential of carbon-carbon composites for high-temperature structural applications is well established. For hypersonic vehicle applications, desirable properties include low density, high specific strength and stiffness, low coefficients of thermal expansion, and retention of mechanical properties above 3000 F. A significant problem associated with carbon materials, however, is that they oxidize rapidly in air at temperatures above about 800 F, and therefore must be protected from oxidation. Successful development of effective methods of oxidation protection is key to the eventual utilization of carbon-carbon composites on hypersonic vehicles such as NASP. In this presentation, the basic elements of an oxidation-protection system are described. Results from oxidation-performance evaluations of state-of-the-art ACC-4 type material in simulated airframe vehicle environments (temperature, pressure, and time) conducted at NASA Langley are also presented. NASA Langley has an active research effort to improve the oxidation resistance of carbon-carbon materials for airframe structural and vehicle thermal protection applications. Conversion coating and sealant development research is highlighted.

Ohlhorst, Craig W.↗
DOE OSTI2020

Si-based materials for lithium-ion batteries III: Surface-modified Si/C/polyvinylidine difluoride powder

X-ray photoelectron spectroscopy was used to analyze Si/C/polyvinylidine difluoride powder obtained from Paraclete Energy Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with F 1s, O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected silicon-carbon and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries X: 70% surface-modified Si/C/polyvinylidine difluoride-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C/polyvinylidine difluoride/carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al Kα radiation at 1486.6 eV (0.834 01 nm). A survey spectrum together with O 1s, C 1s, and Si 2p are presented. The spectra indicate the principal core level photoelectron and Auger electron signals with only minor copper and lithium signals and show the expected silicon-carbon and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

Haasch, Richard T. (ORCID:0000000194792595)↗
NASA NTRS2017

Investigation of the High-Energy Oxidation of FiberForm from DSMC Analysis of Molecular Beam Experiments

A collaborative effort between the University of Illinois at Urbana-Champaign (UIUC), NASA Ames Research Center (ARC) and Montana State University (MSU) succeeded at developing a new finite-rate carbon oxidation model from molecular beam scattering experiments on vitreous carbon (VC). We now aim to use the direct simulation Monte Carlo (DSMC) code SPARTA to apply the model to each fiber of the porous fibrous Thermal Protection Systems (TPS) material FiberForm (FF). The detailed micro-structure of FF was obtained from X-ray micro-tomography and then used in DSMC. Both experiments and simulations show that the CO/O products ratio increased at all temperatures from VC to FF. We postulate this is due to the larger number of collisions an O atom encounters inside the porous FF material compared to the flat surface of VC. For the simulations, we particularly focused on the lowest and highest temperatures studied experimentally, 1023 K and 1823 K, and found good agreement between the finite-rate DSMC simulations and experiments.

Oxidation↗
DOE OSTI2020

Si-based materials for lithium-ion batteries IV: Surface-modified Si/C/perfluorooctene powder

X-ray photoelectron spectroscopy was used to analyze nano-Si/C/perfluorooctene powder obtained from Paraclete Energy Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with F 1s, O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected silicon-carbon, carbon-fluorine, and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries XI. 70% surface-modified Si/C/perfluorooctene-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C/perfluorooctene-carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping (CAMP) Facility, Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.83 401 nm). A survey spectrum together with O 1s, C 1s, and Si 2p are presented. The spectra indicate the principal core level photoelectron and Auger electron signals with only minor sodium, copper, calcium, and lithium signals and show the expected silicon-carbon, carbon-fluorine, and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2024

Iron-sandstone synergy: Advancing in-situ hydrogen production from natural gas via electromagnetic heating

Here, to address the escalating demands for decarbonization in the petroleum industry, a carbon-zero technology, known as in-situ hydrogen (H 2 ) production via electromagnetic (EM)-assisted catalytic heating, has recently been proposed for generating and extracting clean H 2 directly from petroleum reservoirs. Although preliminary techno-economic analyses show significant potential of this emerging technology for clean and affordable hydrogen, the fundamentals of natural gas conversion to H 2 in the presence of reservoir rocks are poorly understood. In this study, we explore the synergy between sandstone and artificial iron-based catalysts in enhancing in-situ H 2 production from methane (CH 4 ) cracking under EM irradiation. The dynamic behaviors of sandstone under EM heating are comprehensively investigated, including its thermal behaviors, thermal runaway (TR) phenomenon, gas generation during TR, and energy consumption. We found that sandstone demonstrates an evident natural catalytic effect for promoting CH 4 conversion to H 2 , enabling H 2 production starting at about 394 °C. The natural catalytic role of iron minerals in sandstone is elucidated using various advanced characterization techniques. Remarkably, when adding iron catalysts into the sandstone, the highest H 2 concentration and CH 4 conversion reaches 91 mol.% and 80%, respectively, at a temperature of 666 °C, while they are 50 mol.% and 35%, respectively, for the sample consisting of iron catalysts and quartz at the same level of temperature. This result indicates a strong iron-sandstone synergy and a potential to stimulate H 2 production by leveraging this synergy. Throughout the experimental process, the generation of carbon oxides (CO and CO 2 ) is negligible. These findings pave a pathway towards future pilot for carbon-zero in-situ H 2 production from sandstone gas reservoirs.

03 NATURAL GAS↗
NASA NTRS1994

General Model for Multicomponent Ablation Thermochemistry

A previous paper (AIAA 94-2042) presented equations and numerical procedures for modeling the thermochemical ablation and pyrolysis of thermal protection materials which contain multiple surface species. This work describes modifications and enhancements to the Multicomponent Ablation Thermochemistry (MAT) theory and code for application to the general case which includes surface area constraints, rate limited surface reactions, and non-thermochemical mass loss (failure). Detailed results and comparisons with data are presented for the Shuttle Orbiter reinforced carbon-carbon oxidation protection system which contains a mixture of sodium silicate (Na2SiO3), silica (SiO2), silicon carbide (SiC), and carbon (C).

Milos, Frank S.↗
DOE OSTI2026

Mechanism of O 2 /NO-Promoted Oxidative C–C Bond Cleavage in Linear Alkanes

Selective oxidation of alkanes to oxygenated products remains a fundamental challenge, particularly if the goal is to promote C−C bond cleavage while minimizing formation of CO 2 . Oxidation conditions that use O 2 and nitrogen oxides (NO x ) have been shown to be very effective in promoting radical-mediated functionalization and oxidative carbon−carbon cleavage in saturated hydrocarbon polymers, such as polyethylene. Here, we investigate the mechanism of O 2 /NO-mediated oxidation of ndecane as a prototypical linear alkane substrate. These reactions enable identification and quantification of reactive intermediates, including nitrites, nitrates, alcohols, and ketones. Under the reaction conditions, these species convert into common ketone intermediates that evolve into α-diketones and other α-functionalized ketones, which undergo further conversion into carboxylic acids. Infrared (IR) spectroscopy indicates that HDPE oxidation proceeds through similar key intermediates. Together, these findings establish a mechanistic framework for NO x -mediated alkane oxidation and provide a foundation for the development of broadly applicable oxidative transformations.

Anions↗
NASA NTRS2000

Sugars as the optimal biosynthetic carbon substrate of aqueous life throughout the universe

Our previous analysis of the energetics of metabolism showed that both the biosynthesis of amino acids and lipids from sugars, and the fermentation of organic substrates, were energetically driven by electron transfer reactions resulting in carbon redox disproportionation (Weber, 1997). Redox disproportionation--the spontaneous (energetically favorable) direction of carbon group transformation in biosynthesis--is brought about and driven by the energetically downhill transfer of electron pairs from more oxidized carbon groups (with lower half-cell reduction potentials) to more reduced carbon groups (with higher half-cell reduction potentials). In this report, we compare the redox and kinetic properties of carbon groups in order to evaluate the relative biosynthetic capability of organic substrates, and to identify the optimal biosubstrate. This analysis revealed that sugars (monocarbonyl alditols) are the optimal biosynthetic substrate because they contain the maximum number of biosynthetically useful high energy electrons/carbon atom while still containing a single carbonyl group needed to kinetically facilitate their conversion to useful biosynthetic intermediates. This conclusion applies to aqueous life throughout the Universe because it is based on invariant aqueous carbon chemistry--primarily, the universal reduction potentials of carbon groups.

NASA Center ARC↗
DOE OSTI2025

Soil porous microstructure control over soil organic matter mobility: A multimethod workflow for understanding chemistry-dependent organic matter binding in soil

Soil organic matter (SOM) has attracted a great deal of interest; particularly for its potential to mitigate human derived CO 2 emissions. Studies have demonstrated that SOM plays a critical role in carbon storage and CO 2 sequestration. However, the sorption properties of SOM, which influence its transport in pore water and stabilization within the soil, remain poorly understood. This study develops a workflow to: (1) examine compound-specific advective and diffusive transport and desorption behaviors, (2) quantify desorption rates through stop-flow and continuous-flow column experiments, and (3) evaluate the impact of soil microporosity on SOM mobility using high-resolution imaging and extractions. Intact core column experiments were conducted on Uncultivated (Natural) and Cultivated soil samples, both were arid soils, collected in Washington State. X-ray computed tomography was employed to measure porosity and pore connectivity, while Fourier-transform ion cyclotron resonance mass spectrometry was used to analyze SOM composition. The findings revealed that cultivation increased total carbon and nitrogen levels due to irrigation and fertilization, enhancing carbon capture potential in arid soils. In contrast, the Natural soil, characterized by higher porosity and connectivity, contained more oxidized carbon. Pore network analysis indicated that soil compaction in the Cultivated soil may lead to longer diffusion pathways, significantly influencing SOM transport and stability.

Hydraulic Properties↗
DOE OSTI2022

Atomic-scale mechanism of carbon nucleation from a deep crustal fluid by replica exchange reactive molecular dynamics simulation

Here we present a mechanistic model of carbon nucleation and growth from a fluid at elevated temperature (T) and pressure conditions, typical of those found in the shallow Earth’s lithosphere. Our model uses a replica exchange reactive molecular dynamics framework in which molecular configurations are swapped between adjacent T replica at regular intervals according to underlying statistical mechanics. This framework allows predicting complex molecular structures and thermodynamics while remaining computationally efficient. Here we simulate the reactivity of an unstable mixture of CO 2 and CH 4 at 1000 K and 1 GPa. We find that the path to thermodynamic equilibrium is initially entropy-driven, producing a diversity of short-lived species, including various alcohols with intermediate carbon oxidation states. Cyclic and polycyclic radicals that are sometimes resonance-stabilized form next and set the stage for carbon nucleation. The carbon exsolution process releases abundant water, is exothermic and starts with the nucleation of a large aggregate of hydrogenated graphene flakes from covalently bonded polycyclic units. The carbon backbone of this nucleus subsequently grows into a hydrogen-depleted fullerene-like structure, before evolving toward a partially bilayered graphene layer. Overall, our results show that the mechanism of graphitic C formation is certainly not bimolecular, and that it may involve a combination of key condensation and radical chain reactions. This will help understand the isotopic, and reactive characteristics of carbon-bearing fluids during their upward transit through the Earth’s mantle and crust. Moreover, the mechanistic insights outlined here present intriguing similarities with the process of soot and interstellar dust formation, which suggests that the widespread distribution of abiotic polyaromatic and graphitic material on Earth and beyond may reflect the prevalence of a fundamental chemical pathway.

58 GEOSCIENCES↗
NASA NTRS1999

Sugars as the Optimal Biosynthetic Carbon Substrate of Aqueous Life throughout the Universe

Our previous analysis of the energetics of metabolism showed that both the biosynthesis of amino acids and lipids from sugars, and the fermentation of organic substrates, were energetically driven by electron transfer reactions resulting in carbon redox disproportionation (Weber 1997). Redox disproportionation -- the spontaneous (energetically favorable) direction of carbon group transformation in biosynthesis -- is brought about and driven by the energetically downhill transfer of electron pairs from more oxidized carbon groups (with lower half-cell reduction potentials) to more reduced carbon groups (with higher half-cell reduction potentials). In this report, we compare the redox and kinetic properties of carbon groups in order to evaluate the relative biosynthetic capability of organic substrates, and to identify the optimal biosubstrate. This analysis revealed that sugars (monocarbonyl alditols) are the optimal biosynthetic substrate because they contain the maximum number of biosynthetically useful .high energy electrons/carbon atom , while still containing a single carbonyl group needed to kinetically facilitate their conversion to useful biosynthetic intermediates. This conclusion applies to aqueous life throughout the Universe because it is based on invariant aqueous carbon chemistry -- primarily, the universal reduction potentials of carbon groups.

Weber, Arthur L.↗
DOE OSTI2021

Carbonyl Identification and Quantification Uncertainties for Oxidative Polymer Degradation

The most revealing indicator for oxidative processes or state of degraded plastics is usually carbonyl formation, a key step in materials degradation as part of the carbon cycle for man-made materials. Hence, the identification and quantification of carbonyl species with infrared spectroscopy have been the method of choice for generations, thanks to their strong absorbance and being an essential intermediate in carbon oxidation pathways. Despite their importance, precise identification and quantification can be challenging and rigorous fully traceable data are surprisingly rare in the existing literature. An overview of the complexity of carbonyl quantification is presented by the screening of reference compounds in solution with transmission and polymer films with ATR IR spectroscopy, and systematic data analyses. Significant variances in existing data and their past use have been recognized. Guidance is offered how better measurements and data reporting could be accomplished. Experimental variances depend on the combination of uncertainty in exact carbonyl species, extinction coefficient, contributions from neighboring convoluting peaks, matrix interaction phenomena and instrumental variations in primary IR spectral acquisition (refractive index and penetration depth for ATR measurements). In addition, diverging sources for relevant extinction coefficients may exist, based on original spectral acquisition. For common polymer degradation challenges, a relative comparison of carbonyl yields for a material is easily accessible, but quantification for other purposes, such as degradation rates and spatially dependent interpretation, requires thorough experimental validation. All variables featured in this overview demonstrate the significant error margins in carbonyl quantification, with exact carbonyl species and extinction coefficients already being major contributors on their own.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗