Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalytic upgrading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

171 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2022

Supported molybdenum oxides for the aldol condensation reaction of acetaldehyde

The (retro-)aldol condensation reaction is an important chemical transformation in the upgrading of biomass-derived compounds into fuels and valuable specialty chemicals. In this study, we found that supported molybdenum oxide (MoO x ) catalysts were active and selective for the aldol condensation of acetaldehyde to crotonaldehyde under steady-state reactor conditions. Through a combination of transmission electron microscopy (TEM), ultraviolet–visible (UV–VIS) diffuse reflectance spectroscopy, Fourier transform infrared (FTIR) spectroscopy of adsorbed pyridine, and steady-state reactor testing, we determined that highly dispersed MoO x has a strong interaction with a γ-Al 2 O 3 support resulting in optimal catalyst performance at low weight loadings. In contrast, MoO x particles supported on SiO 2 have a weaker interaction with the support, resulting in a monotonic relationship between Mo loading and aldol condensation activity. The Lewis acid site density and strength are important parameters for predicting aldol condensation activity across all samples. The concentration of weak acid sites had a poor correlation with aldol condensation activity, most likely because these sites are too weak to activate acetaldehyde for the reaction. Medium and strong acid sites both had good correlations to aldol condensation activity. Results from X-ray absorption near edge structure (XANES) and acetaldehyde temperature programmed desorption (TPD) indicated that partially reduced MoO x was more active for aldol condensation, but pretreatment in reducing or oxidizing environments had no significant effect on steady-state catalytic activity. Finally, characterization of spent catalyst samples through temperature programmed oxidation (TPO) and thermogravimetric analysis (TGA) revealed that catalysts with high densities of strong acid sites tended to form more carbonaceous deposits on the surface over the course of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced CO 2 Methanation Activity of Sm 0.25 Ce 0.75 O 2-δ –Ni by Modulating the Chelating Agents-to-Metal Cation Ratio and Tuning Metal–Support Interactions

Highly active and selective CO 2 methanation catalysts are critical to CO 2 upgrading, synthetic natural gas production, and CO 2 emission reduction. Wet impregnation is widely used to synthesize oxide-supported metallic nanoparticles as the catalyst for CO 2 methanation. However, as the reagents cannot be homogeneously mixed at an atomic level, it is challenging to modulate the microstructure, crystal structure, chemical composition, and electronic structure of catalysts via wet impregnation. In this work, a scalable and straightforward catalyst fabrication approach has been designed and validated to produce Sm 0.25 Ce 0.75 O 2-δ -supported Ni (SDC–Ni) as the CO 2 methanation catalyst. By varying the chelating agents-to-total metal cations ratio (C/I ratio) during the catalyst synthesis, we can readily and simultaneously modulate the microstructure, metallic surface area, crystal structure, chemical composition, and electronic structure of SDC–Ni, consequently fine-tuning the oxide–support interactions and CO 2 methanation activity. The optimal C/I ratio (0.1) leads to an SDC–Ni catalyst that facilitates C–O bond cleavage and significantly improves CO 2 conversion at 250 °C. A CO 2 -to-CH 4 yield of >73% has been achieved at 250 °C. Furthermore, a stable operation of >1500 hours has been demonstrated, and no degradation is observed. Extensive characterizations were performed to fundamentally understand how to tune and enhance CO 2 methanation activity of SDC–Ni by modulating the C/I ratio. The correlation of physical, chemical, and catalytic properties of SDC–Ni with the C/I ratio is established and thoroughly elaborated in this work. This study could be applied to tune the oxide–support interactions of various catalysts for enhancing the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Multimodal Ambient Pressure Sample Environment for the HIPPIE Solid-Gas Endstation at MAX IV Laboratory

The HIPPIE APXPS instruments have undergone several major upgrades, such as developing a dedicated solid gas endstation to specialize in multimodal ambient pressure sample environments centered around X-ray photoelectron spectroscopy. Herein, the technical specifications of the HIPPIE solid gas endstation are detailed; upgrades to the laser heating and gas systems, as well as the addition of an offline 1 bar reactor, are introduced. To demonstrate how the endstation is currently being utilized, scientific examples of all upgrades are presented, as well as science cases using infrared reflection-adsorption spectroscopy. The HIPPIE solid gas endstation is maturing into an instrument offering bespoke sample environments aimed at pushing experimental capabilities, especially in the time-resolved domain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Influence of Ag metal dispersion on the thermal conversion of ethanol to butadiene over Ag-ZrO 2 /SiO 2 catalysts

Atomistic scale models were developed and coupled with experimental investigation to deliver a functional understanding of catalytic activity and selectivity in the conversion of ethanol to 1,3-butadiene over Ag/ZrO 2 /SiO 2 . A detailed evaluation of the structural and electronic properties of the resultant catalyst models led to the identification of critical active sites of the catalyst. More importantly, the extent of Ag dispersion on the SiO 2 support and relative proximity to ZrO 2 were found to vary with the oxidation state of Ag and local coordination environment (Ag-O SiO2 ) allowing for critical control of ethanol conversion towards butadiene or ethylene. Simulations revealed that less dispersed or clustered Ag contain predominantly Ag 0 charge state and promote conversion of ethanol to ethylene. The well-dispersed Ag/ZrO 2 /SiO 2 catalyst instead contain a larger fraction of cationic Ag δ+ , and predominantly promote ethanol dehydrogenation and subsequent production of butadiene. The theoretical insights drawn were validated and confirmed experimentally using TEM, XRD and reactivity measurements demonstrating the effect of Ag dispersion on the selectivity of ethanol conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Antimicrobial Properties of Corn Stover Lignin Fractions Derived from Catalytic Transfer Hydrogenolysis in Supercritical Ethanol with a Ru/C Catalyst

Converting lignin to value-added products at high yields provides an avenue for making ethanol biorefineries more profitable while reducing the carbon footprint of products generally derived from petroleum. In this study, corn stover lignin was depolymerized by catalytic transfer hydrogenolysis (CTH) in supercritical ethanol with a Ru/C catalyst. The lignin-derived bio-oil was then sequentially extracted utilizing hexane, petroleum ether, chloroform, and ethyl acetate as solvents in order of less polar to polar, and the subsequent bio-oils were characterized using GPC, GC/MS, and HSQC NMR. In this work, results show that the monomers in the bio-oil fractions contained primarily alkylated phenols, hydrogenated hydroxycinnamic acid derivatives, syringol and guaiacol-type lignins created from reductive cleavages of ether linkages, which were sequentially extracted into groups depending on the solvent polarity. The antimicrobial properties of the bio-oils were screened against Gram-positive (Bacillus subtilis, Lactobacillus amylovorus, and Staphylococcus epidermidis) and Gram-negative (Escherichia coli) bacteria and yeast (Saccharomyces cerevisiae) by examining microbial growth inhibition. Results show that CTH-derived bio-oils inhibited all tested organisms at concentrations less than 3 mg/mL. Total monomer concentration and the presence of specific monomers (i.e., syringyl propane) showed correlations to antimicrobial activity, likely due to cell death or membrane damage. This study provides insights into using sequential extraction to fractionate lignin-derived compounds and correlations between the properties of the extracted compounds and their antimicrobial activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic consequences of hydrogen addition events and solvent-adsorbate interactions during guaiacol-H 2 reactions at the H 2 O-Ru(0 0 0 1) interface

Catalytic reactions of biomass-derived phenolics and H 2 occur on transition metal surfaces via competitive C–O cleavage and ring saturation pathways, with both requiring multiple hydrogen addition events before forming their respective rate limiting transition states. These events are markedly affected by solvent chemical identity, with polar protic solvents ionizing hydrogen adatoms (H*) to interfacial protons (H + ) and opening up new catalytic routes. Here, we establish the reaction coordinate space for guaiacol-H 2 reactions on Ru(0 0 0 1) using density functional theory and describe the atomic-scale effect of a polar protic solvent, H 2 O. Coupled H + and H* attack leads to quasi-equilibrated enol and keto intermediates as the precursors for C–O cleavage and ring saturation, respectively. For C–O cleavage, H 2 O solvent enables a lower energy pathway via concomitant transfer of the hydroxyl H + to the methoxy oxygen during C–OCH 3 cleavage, forming a charge separated [Ru(s)–(C 6 H 5 O – )…(H + )…OCH 3 ] transition state and reducing the barrier by up to 0.8 eV as compared to unassisted C–OCH 3 cleavage. For ring saturation, H* attack onto an unsaturated meta carbon is rate limiting with no direct solvent participation, suggesting that protic polar solvents selectively promote the C–O cleavage pathway. Taken together, we show that activating guaiacol for either C–O bond cleavage or ring saturation product formation depends on the reactive hydrogen identity (H* or H + ), enol/keto isomerization equilibrium, and accessibility of the proton assisted Car–OCH 3 cleavage transition state. Here, all such factors are tunable via changes to the solvent or metal identity.

09 BIOMASS FUELS↗
DOE OSTI2025

Dehydration of Methyl Lactate on Alkali Cation-Exchanged Faujasite: Effects of Metal Cation Identity and Water Pressure

Turnover rates for the catalytic dehydration of methyl lactate (ML) over ion-exchanged faujasite (FAU) catalysts depend on the identity of alkali metal cations (Na + , K + , Cs + ) and local solvation effects. Analysis of rate measurements and in situ infrared spectroscopy gives evidence that the reaction involves kinetically relevant dissociation of adsorbed methyl lactate upon alkali metal cations. This process involves concerted methyl transfer to the surface and dissociation of the alkali metal from the framework, which occurs at cationic active sites that remain predominantly unoccupied under relevant conditions (0.5–10 kPa ML, 0.5–15 kPa H 2 O, 563–583 K). Despite the mechanistic similarities, apparent activation enthalpies (ΔH app ‡ ) decrease linearly (47 kJ mol –1 from Na + to Cs + ) with ionization energy and cationic radius, and apparent activation entropies (ΔS app ‡ ) decrease 74 J mol –1 K –1 . These trends reflect electrostatic interactions that stabilize the cations to the anionic sites on the zeolite: stronger association between these charges leads to increasingly endothermic processes to displace the alkali metal to form a cationic methoxy and an intrapore metal lactate intermediate. Water physisorption measurements suggest alkali metal ions bind superstoichiometric quantities of water within FAU pores, and in situ infrared spectra suggest the concerted adsorption of ML requires reorganization of this water. Consequently, these processes introduce entropic gains that partially offset entropy losses associated with ML adsorption. Hence, turnover rates differ only by a factor of 2 among Na-, K-, and Cs-FAU at 573 K (ΔΔG app ‡ = 5 kJ mol –1 ). These findings demonstrate the interplay of alkali metal ions with zeolite active sites and intrapore water clusters for ML dehydration, indicating that these interactions can be leveraged to deliver optimal performance under different reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗