Search NASA⌕ Search

SEARCH · Search NASA

Results for “characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Predicting Electron Population Characteristics in 2-D Using Multispectral Ground-Based Imaging

Ground-based imaging and in situ sounding rocket data are compared to electron transport modeling for an active inverted-V type auroral event. The Ground-to-Rocket Electrodynamics-Electrons Correlative Experiment (GREECE) mission successfully launched from Poker Flat, Alaska, on 3 March 2014 at 11:09:50 UT and reached an apogee of approximately 335 km over the aurora. Multiple ground-based electron-multiplying charge-coupled device (EMCCD) imagers were positioned at Venetie, Alaska, and aimed toward magnetic zenith. The imagers observed the intensity of different auroral emission lines (427.8, 557.7, and 844.6 nm) at the magnetic foot point of the rocket payload. Emission line intensity data are correlated with electron characteristics measured by the GREECE onboard electron spectrometer. A modified version of the GLobal airglOW (GLOW) model is used to estimate precipitating electron characteristics based on optical emissions. GLOW predicted the electron population characteristics with 20% error given the observed spectral intensities within 10 deg of magnetic zenith. Predictions are within 30% of the actual values within 20 deg of magnetic zenith for inverted-V-type aurora. Therefore, it is argued that this technique can be used, at least in certain types of aurora, such as the inverted-V type presented here, to derive 2-D maps of electron characteristics. These can then be used to further derive 2-D maps of ionospheric parameters as a function of time, based solely on multispectral optical imaging data.

multispectral ground-based imaging↗
NASA NTRS2021

Characteristics of the RFI Environment at L-band as Observed from SMAP

This manuscript presents some characteristics of RFI sources as they were observed by the SMAP L-band radiometer. Knowledge of the nature of RFI can help improve design of future detection algorithms. For example, observations with airborne instruments demonstrating the pulse-like nature of RFI in the protected L-band spectrum at 1.413 GHz (attributed to air-traffic control radar) informed the design of the Aquarius radiometer and its RFI detection algorithm. The experience of Aquarius and SMOS in space led to the advanced detection system on SMAP. The fully polarimetric SMAP radiometer with spectral and time domain processing, provides sophisticated detection but also the opportunity to look at the temporal and spectral characteristics of the L-band RFI globally. The examples and categorization presented are based on a global sample but over a limited time. They are not meant to be complete. Rather, they are intended to provide insight into the time-frequency characteristics of RFI with the goal that knowledge of the characteristics can help improve detection in future missions.

Yan Soldo↗
NASA NTRSDate not supplied

Characteristics of Extreme Precipitation Events (EPE) in the Tropics and Association with Convective Aggregation

Extreme precipitation (EP) has become increasingly frequent and is causing more devastating impacts on society in recent years. EP is traditionally measured by the maximum or threshold-exceeding gridded precipitation of a given duration. We have developed an extreme precipitation event (EPE) algorithm that tracks entire precipitation life cycle across space and time, which enables us to characterize properties of the entire EPE, such as duration (from sub-daily to multi-day), areal coverage, and total rain volume of the event. These EPE characteristics are critical in understanding precipitation development and their interaction with large-scale meteorology, in addition, providing more comprehensive matrix for disaster management. This study examines the EPE characteristics from the tropics derived from high-resolution Integrated Multi-satellitE Retrievals fro GPM (IMERG) product. The difference between EPE characteristics between tropical land and ocean will be discussed. Large-scale meteorological control as well as convective aggregation will be studied on the impact of EPE characteristics in tropics.

Convective aggregation↗
NASA NTRS2023

Global Assessment of Drought Characteristics in the Anthropocene

Contemporary understanding of the impacts of climate change on global drought characteristics (e.g., intensities, extents) is still limited and not well understood. This knowledge is critical because projected changes in climate are expected to impact on future water availability as well as influence decisions on how water resources are allocated. The main aim of this study is to improve understanding of drought characteristics (extents and duration) in the Anthropocene where rapid changes in the environment are caused by the composite influence of human activities and climate change. Multi-scale earth observation data (1980 - 2020) and the Coupled Model Intercomparison Project Phase 6 climate models, which incorporate the Shared Socioeconomic Pathways (2040 - 2070 and 2070 - 2100) are used to assess these characteristics as well as identify climatic hotspots where changes in drought characteristics could drive groundwater hydrology. Results show that towards the end of the 21st century, global land areas under drought will significantly decrease but their durations will not. Generally, there is evidence of significant decline in the proportion of areas that will experience various drought intensities (moderate, severe and extreme drought) in the future and for each category, drought affected areas will not reach 30% on average. Moreover, some regions are potential hotspots of climate–groundwater interactions where drought events could directly impact on groundwater. This is because of the varying degree of strong correlations (positive and negative) between climate and groundwater data in some areas (e.g., Australia, Europe, Southern Africa, Asia). The relatively strong negative correlations in some of these hotspots are indicative of the presence of considerable lags, that could be caused by aridity as well as human groundwater footprints.

Christopher E Ndehedehe↗
DOE OSTI2024

An Open-Source Framework for Characterizing Urban Energy Models: Integrating Top-Down and Bottom-Up Methods to Predict Residential Buildings Characteristics: Preprint

Bottom-up urban energy models are crucial for understanding current energy use patterns and informing design strategies. However, accurately characterizing these models to represent different communities remains a challenge due to the extensive data needed for simulating existing energy use behavior. This data includes information related to human activities and building characteristics, all of which correlate with socioeconomic factors. To overcome this challenge, we developed an automated framework that utilizes both top-down and bottom-up data, to predict unknown building and occupant characteristics that are needed for more accurate and equitable modeling and analytics. Our framework, integrated into the URBANopt district energy modeling platform, uses statistical data models from ResStock. URBANopt models co-located buildings and neighborhoods. At this scale there are data gaps in building characteristic data, such as materials, insulation, occupancy, income, and energy usage of the buildings. To address this data gap, we use ResStock data, representative at the census tract scale, and develop machine-learning and deeplearning techniques to disaggregate it to individual buildings. By mapping unique occupant, building and economic properties to URBANopt energy models, we gain detailed insights into the variability of building energy use across different neighborhoods. This insight helps deploy technologies for co-located buildings and supports targeted upgrades for communities with unique economic and demographic characteristics, ensuring energy equity. Accurate characterization of energy models allows us to develop equitable strategies tailored to diverse neighborhoods, whether underserved or affluent. Our automated framework streamlines energy modeling and provides a reliable tool for building energy characterization.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗
DOE OSTI2026

Evaluating Application Characteristics for GPU Portability Layer Selection

GPUs have become the dominant source of computing power for high performance computing and are increasingly being used across the High Energy Physics computing landscape for a wide variety of tasks. Though NVIDIA is currently the main provider of GPUs, AMD and Intel are rapidly increasing their market share. As a result, programming using a vendor-specific language such as CUDA can significantly reduce deployment choices. There are a number of portability layers such as Kokkos, Alpaka, SYCL, OpenMP and std::par that permit execution on a broad range of GPU and CPU architectures, significantly increasing the flexibility of application programmers. However, each of these portability layers has its own characteristics, performing better at some tasks and worse at others, or placing limitations on aspects of the application. In this presentation, we report on a study of application and kernel characteristics that can influence the choice of a portability layer and show how each layer handles these characteristics. We have analyzed representative heterogeneous applications from CMS (patatrack and p2r), DUNE (Wire-Cell Toolkit), and ATLAS (FastCaloSim) to identify key application characteristics that have different behaviors for the various portability technologies. Using these results, developers can make more informed decisions on which GPU portability technology is best suited to their application.

Atif, Mohammad [Brookhaven]↗
DOE OSTI2024

A Characteristics Approach to the Finite Element Method

Herein, we present a new method for solving the linear Boltzmann transport equation. Two commonly used and well-understood methods for solving partial differential equations are the method of characteristics (MOC) and the finite element method (FEM). We propose a new method that combines the fundamental concept of the FEM with the analytic solution from the MOC to obtain coefficients for the FEM basis function expansion. Traditionally, coefficients for the FEM basis function expansion are obtained via matrix inversion. Instead, we solve for the coefficients with the MOC and represent the underlying fields with the basis function expansion using these coefficients. We provide a convergence study for our method with results from two sets of FEM basis functions: Gauss-Legendre and Gauss-Lobatto sets. We also compare two different variations of our method categorized as short characteristics and intermediate characteristics.

42 ENGINEERING↗
DOE OSTI2024

Spatiotemporal Reaction Dynamics Control in Two‐Photon Polymerization for Enhancing Writing Characteristics

Since 2001, 3D microfabrication based on two‐photon polymerization (TPP) has drawn extensive attention and interest in biology, optics, photonics, material science, and high‐energy physics. The in‐volume fabrication capability due to the threshold behavior of two‐photon absorption enables TPP higher flexibility compared with other nanofabrication techniques. However, as determined by the in‐volume fabrication feature as well as various reaction dynamics, the writing characteristics of TPP, such as throughput, accuracy, surface quality, and fabrication capability, are still limited. Herein, a comprehensive study is performed on the spatiotemporal behavior of reaction dynamics during TPP fabrication, mainly focusing on spatiotemporal characteristics of radical diffusion, photothermal effect, microscale mechanics, and voxel stacking process. Based on the study, a nonsequential fabrication method is established to simultaneously improve key writing characteristics of TPP and realize sharp features, high speeds, large overhang structure, and smooth surfaces. The method established in this work can be applied to improve the performance of functional devices for various fields.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Investigating Characteristic Droplet Size Distributions in Large Eddy Simulations of Stratocumulus Clouds

Cloud processes relevant to radiative and precipitation properties depend on the shape of the cloud droplet size distribution. Recent holographic observations revealed that cloud droplet populations do not have the same size distribution shapes throughout but form regions of characteristic distributions with similar microphysical properties. We investigate the existence and properties of these characteristic distributions within Large‐Eddy Simulations of stratocumulus clouds using Lagrangian and bin microphysics schemes. Distribution types are identified, revealing localized characteristic distributions that vary on the scale of the largest convective cell for simulations with bin microphysics. The results from the Lagrangian microphysics scheme hint at similar behavior. Compared to observations, the simulated clouds are much more uniform. Analysis of the LES results suggests a connection to the local entrainment rate, so the poorly resolved entrainment interface in LES may be a cause of the uniformity. The uniformity of the large‐scale forcing could also be a factor.

cloud droplet size distributions↗
DOE OSTI2024

Breakdown characteristics analysis of kV-class vertical GaN PIN rectifiers by wafer-level sub-bandgap photoluminescence mapping

This work reports analysis of the reverse-bias breakdown characteristics of homojunction gallium nitride (GaN) p–i–n (PIN) rectifiers fabricated on bulk GaN substrates. Sub-bandgap photoluminescence mapping at room temperature as a contactless, non-destructive wafer inspection method was performed to analyze the impact of material properties on grown GaN PIN diodes and to study the correlation between defect types and breakdown characteristics of vertical GaN PIN rectifiers. Under the sub-bandgap excitation, yellow luminescence is dominant. The premature breakdown characteristics of the fabricated kV-class vertical GaN PIN rectifiers with nitrogen-implanted floating guard rings are found to be associated with material defects and deep level complexes. Photoluminescence mapping has demonstrated its effectiveness in quantitative analysis of dislocations and other types of defects.

42 ENGINEERING↗
DOE OSTI2024

Interfacial magnetic characteristics of nearly compensated gadolinium iron garnet

Reports on spin Hall magnetoresistance, magnonic spin currents from thermal gradients, and spin transfertorque magnetic random-access memory using compensated ferrimagnets largely discuss bulk magnetization but lack consideration of depth profiles or interfacial characteristics. Here, magnetic and structural characterization of profiles and interfaces was performed for nearly compensated gadolinium iron garnet (GdIG) thin films. X-ray diffraction and reciprocal space maps show that sputter deposited GdIG on Si is polycrystalline with the desired cubic garnet phase, and GdIG on gadolinium gallium garnet (GGG) is epitaxial with <0.06% compressive strain. Temperature-dependent magnetometry confirms the compensation temperatures of GGG/GdIG and Si/GdIG to be 285 and 260 K, respectively, both near room temperature. Interestingly, these measurements suggest the presence of unsaturated rare-earth moments, which result in a characteristic hysteresis between heating and cooling sequences in the magnetization-temperature curves at zero field. Depth-profile measurements from polarized neutron reflectometry (PNR) indicate up to 91% volume fraction in GdIG on Si. At the interface, PNR reveals a region containing magnetized Fe-doped GGG, a low-density GdIG at the GGG/GdIG interface, and a thin magnetically dead layer at the Si/GdIG interface. Cross-sectional transmission electron microscopy and energy dispersive x-ray spectroscopy confirm the assessment of PNR. In conclusion, the magnetic characteristics of interfacial regions are attributed to intermixing of Fe-Ga at the GGG/GdIG interface and the presence of amorphous Fe-Si at the Si/GdIG interface.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Parallel-in-Time Solution of Hyperbolic PDE Systems via Characteristic-Variable Block Preconditioning

We consider the parallel-in-time solution of both linear and nonlinear hyperbolic partial differential equation (PDE) systems in one spatial dimension. In the nonlinear setting, the discretized equations are solved with a preconditioned residual iteration based on a global linearization. The linear(ized) equation systems are approximately solved parallel-in-time using a block preconditioner applied in the characteristic variables of the underlying linear(ized) hyperbolic PDE. This change of variables is motivated by the observation that intervariable coupling between characteristic variables is weak, at least locally where spatio-temporal variations in the eigenvectors of the associated flux Jacobian are sufficiently small, while that between the original variables is not. For an ℓ-dimensional system of PDEs, applying the preconditioner consists of solving a sequence of ℓ scalar linear(ized)-advection-like problems, each associated with a different characteristic wave-speed in the underlying linear(ized) PDE. Furthermore, we approximately solve these linear advection problems using multigrid reduction-in-time (MGRIT); however, any other suitable parallel-in-time method could be used. Numerical examples are shown for the (linear) acoustics equations in heterogeneous media and for the (nonlinear) shallow water equations and Euler equations of gas dynamics with shocks and rarefactions. For many test problems, the solver converges in just a handful of iterations and with mesh-independent convergence rates.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Characteristics and sources of fluorescent aerosols in the central Arctic Ocean

The Arctic is sensitive to cloud radiative forcing. Due to the limited number of aerosols present throughout much of the year, cloud formation is susceptible to the presence of cloud condensation nuclei and ice nucleating particles (INPs). Primary biological aerosol particles (PBAP) contribute to INPs and can impact cloud phase, lifetime, and radiative properties. We present yearlong observations of hyperfluorescent aerosols (HFA), tracers for PBAP, conducted with a Wideband Integrated Bioaerosol Sensor, New Electronics Option during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition (October 2019–September 2020) in the central Arctic. We investigate the influence of potential anthropogenic and natural sources on the characteristics of the HFA and relate our measurements to INP observations during MOSAiC. Anthropogenic sources influenced HFA during the Arctic haze period. But surprisingly, we also found sporadic “bursts” of HFA with the characteristics of PBAP during this time, albeit with unclear origin. The characteristics of HFA between May and August 2020 and in October 2019 indicate a strong contribution of PBAP to HFA. Notably from May to August, PBAP coincided with the presence of INPs nucleating at elevated temperatures, that is, >–9°C, suggesting that HFA contributed to the “warm INP” concentration. The air mass residence time and area between May and August and in October were dominated by the open ocean and sea ice, pointing toward PBAP sources from within the Arctic Ocean. As the central Arctic changes drastically due to climate warming with expected implications on aerosol–cloud interactions, we recommend targeted observations of PBAP that reveal their nature (e.g., bacteria, diatoms, fungal spores) in the atmosphere and in relevant surface sources, such as the sea ice, snow on sea ice, melt ponds, leads, and open water, to gain further insights into the relevant source processes and how they might change in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

1997 Broward Travel Characteristics Study

The Broward Travel Characteristics Study was initiated in February 1996 to identify localized socioeconomic and travel characteristics that could be used to improve the travel forecasting accuracy of the Florida Standard Urban Transportation Model System for Broward County. The survey recruited 2,625 households. Of these, 880 households completed the survey, indicating household demographic and socioeconomic characteristics (household verification survey). 33% of the households also completed a Direct Utility Assessment survey used to estimate the propensity for using transit. A total of 1,651 daily trips were extracted from the travel log survey over a 2-week period.

1Hz data↗
NASA NTRS1962

On the Dynamic Characteristics of Free-Liquid Jets and a Partial Correlation with Orifice Geometry

A technique for evaluating the dynamic characteristics of free-liquid jets on a comparative basis is presented. This method consists of determining the pressure distribution produced by the perpendicular impingement of a jet upon a flat plate and using these data for comparing and categorizing jets with unknown properties in terms of similar data produced by jets having known characteristics-i.e., with jets produced by fully developed turbulent flow, fully developed laminar flow, and a jet having a near-uniform velocity profile. The visual characteristics, as well as both the mean and the fluctuating pressure distributions, are presented for these three reference configurations and for a number of jets produced by orifices having varying length-diameter ratios, combined with varying degrees of surface roughness in the initial five diameters of straight bore.

Rupe, Jack H.↗
NASA NTRS1955

Longitudinal Stability and Control Characteristics as Determined by the Rocket-Model Technique for an Inline, Cruciform, Canard Missile Configuration with a Low-Aspect-Ratio Wing Having Trailing-Edge Flap Controls for a Mach Number Range of 0.7 to 1.8

Two full-scale models of an inline, cruciform, canard missile configuration having a low-aspect-ratio wing equipped with flap-type controls were flight tested in order to determine the missile's longitudinal aerodynamic characteristics. Stability derivatives and control and drag characteristics are presented for a range of Mach number from 0.7 to 1.8. Nonlinear lift and moment curves were noted for the angle-of-attack range of this test (0 deg to 8 deg ). The aerodynamic-center location for angles of attack near 5 deg remained nearly constant for supersonic speeds at 13.5 percent of the mean aerodynamic chord; whereas for angles of attack near O deg, there was a rapid forward movement of the aerodynamic center as the Mach number increased. At a control deflection of O deg, the missile's response to the longitudinal control was in an essentially fixed space plane which was not coincident with the pitch plane as a result of the missile rolling. As a consequence, stability characteristics were determined from the resultant of pitch and yaw motions. The damping-in-pitch derivatives for the two angle-of-attack ranges of the test are in close agreement and varied only slightly with Mach number. The horn-balanced trailing-edge flap was effective in producing angle of attack over the Mach number range.

Baber, H. T., Jr.↗
NASA NTRS1970

Performance characteristics of the lifting body vehicle

Designers have relied heavily upon aerodynamic theory and wind-tunnel testing of large and small models to obtain accurate estimates of the performance characteristics for a new configuration and to provide a realistic simulation of the vehicle’s flying characteristics before its first flight, However, the highly unusual shapes of the lifting body vehicles have raised some questions of how accurately their lift and drag characteristics could be defined with these prediction techniques. Thus it is pertinent to com- pare the lift and drag data obtained in flight for three lifting body vehicles (ref. 1 and unpublished results) with wind-tunnel measurements obtained on the actual flight vehicles (refs. 2 and 3 and unpublished results) and on small-scale models of the flight vehicles (ref. 4 and unpublished results). These comparisons, together with discussions of separated flow problems and the effects of ablated surfaces, should be useful to the designers of space shuttlecraft.

Jon S Pyle↗
NASA NTRS1969

Analysis of urban residential environments using color infrared aerial photography: An examination of socioeconomic variables and physical characteristics of selected areas in the Los Angeles basin, with addendum: An application of the concepts of the Los Angeles residential environment study to the Ontario-Upland region of California

Aerial photographs taken with color infrared film were used to differentiate various types of residential areas in the Los Angeles basin, using characteristics of the physical environment which vary from one type of residential area to another. Residential areas of varying quality were classified based on these characteristics. Features of the physical environment, identifiable on CIR aerial photography were examined to determine which of these are the best indicators of quality of residential areas or social areas, as determined by the socioeconomic characteristics of the inhabitants of the selected areas. Association between several physical features and the socioeconomic variables was found to exist.

Mullens, R. H., Jr.↗