Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Preparation and Structural Analysis of CdS Nanoparticle Embedded Polyurethane Nanocomposites

Polymer nanocomposite samples of different weight ratio of CdS were developed by solution embedding of nanoparticles in polyurethane. XRD and Scanning Electron Microscopy (SEM) were used to understand the structural properties of polymer nanocomposite samples. SEM micrograph demonstrates the dispersion of CdS nanoparticles in polymer matrix. It has been observed that crystallinity of PU decreases with increase in concentration of CdS nanoparticles. The XRD data show the characteristic peaks of nanoparticles (i.e.CdS) in nanocomposite samples, which confirm the nanostructure formation in polymer matrix.

36 MATERIALS SCIENCE↗

Synthesis and characterization of nanometric powders of UO{sub 2+x}, (Th,U)O{sub 2+x} and (La,U)O{sub 2+x}

This paper describes a new way of preparing nanometric powders of uranium oxide, to fit the needs of studies on UO{sub 2} oxidation, through the electrochemical reduction of U(VI) into U(IV). These powders can also be doped with radionuclides if necessary. The precipitation of oxides occurs in reducing and anoxic conditions. This original method makes it possible to synthesize nanometric UO{sub 2} powders with a calibrated size, as well as the Th- and La-doped UO{sub 2} powders with a predefined composition. The powder characterization by the X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron Microscopy shows the formation of spherical crystallites of UO{sub 2+x}, (Th,U)O{sub 2+x} and (La,U)O{sub 2+x} phases. The composition can be defined by the initial Th/(Th+U) and La/(La+U) ratios in solution and the particle size can be controlled by varying the pH. - Abstract: High-resolution transmission electron microscopy (HRTEM) observation of UO2+x powders obtained at a pH=6.5. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of mesoporous zeolite single crystals with cheap porogens

Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals have been successfully synthesized by adding soluble starch or sodium carboxymethyl cellulose (CMC) to a conventional zeolite synthesis system. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption analysis, {sup 27}Al magic angle spinning nuclear magnetic resonance ({sup 27}Al MAS NMR), temperature-programmed desorption of ammonia (NH{sub 3}-TPD) and ultraviolet-visible spectroscopy (UV-vis). The SEM images clearly show that all zeolite crystals possess the similar morphology with particle size of about 300 nm, the TEM images reveal that irregular intracrystal pores are randomly distributed in the whole crystal. {sup 27}Al MAS NMR spectra indicate that nearly all of the Al atoms are in tetrahedral co-ordination in ZSM-5, UV-vis spectra confirm that nearly all of titanium atoms are incorporated into the framework of TS-1. The catalytic activity of meso-ZSM-5 in acetalization of cyclohexanone and meso-TS-1 in hydroxylation of phenol was also studied. The synthesis method reported in this paper is cost-effective and environmental friendly, can be easily expended to prepare other hierarchical structured zeolites. - Graphical abstract: Mesoporous zeolite single crystals were synthesized by using cheap porogens as template. Highlights: > Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals were synthesized. > Soluble starch or sodium carboxymethyl cellulose (CMC) was used as porogens. > The mesoporous zeolites had connected mesopores although closed pores existed. > Higher catalytic activities were obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing the Internal Nanocrystallinity of Calcite Due to Nonclassical Crystallization by 3D Coherent X–Ray Diffraction Imaging

The internal crystallinity of calcite is investigated for samples synthesized using two approaches: precipitation from solution and the ammonium carbonate diffusion method. Scanning electron microscopy (SEM) analyses reveal that the calcite products precipitated using both approaches have a well–defined rhombohedron shape, consistent with the euhedral crystal habit of the mineral. The internal structure of these calcite crystals is characterized using Bragg coherent diffraction imaging (BCDI) to determine the 3D electron density and the atomic displacement field. BCDI reconstructions for crystals synthesized using the ammonium carbonate diffusion approach have the expected euhedral shape, with internal strain fields and few internal defects. In contrast, the crystals synthesized by precipitation from solution have very complex external shapes and defective internal structures, presenting null electron density regions and pronounced displacement field distributions. These heterogeneities are interpreted as multiple crystalline domains, created by a nonclassical crystallization mechanism, where smaller nanoparticles coalescence into the final euhedral particles. The combined use of SEM, X–ray diffraction (XRD), and BCDI allows for structurally differentiating calcite crystals grown with different approaches, opening new opportunities to understand how grain boundaries and internal defects alter calcite reactivity.

36 MATERIALS SCIENCE↗

Intrinsic magnetism in Fe doped SnO{sub 2} nanoparticles

Iron doped semiconducting nanoparticles Sn{sub 1-x}Fe{sub x}O{sub 2} with x=0, 0.001, 0.002, 0.003, 0.004, 0.01 and 0.03 were prepared by a sol-gel method. The X-ray diffraction, Transmission Electron Microscopy measurements confirm the rutile structure with no impurity phase. The three characteristic lines of electron spin resonance (ESR) are observed in the doped samples for all compositions, which is a clear evidence for rhombic Fe{sup 3+} in rutile phase. The line width of ESR increases with increase in Fe concentration due to induced disorder. The spin-pumping effect is observed at temperatures below 250 K for the samples with x=0.01 and 0.03. However, based on the Curie-Weiss susceptibility, iron is in paramagnetic state and is subject to weak antiferromagnetic interaction. Blue shift in the optical band gap is observed with increase in the Fe content. -- Graphical abstract: The ESR spectra reveal that the nature of Fe in Sn{sub 1-x}Fe{sub x}O{sub 2} samples is isolated rhombic Fe{sup 3+}-ion in rutile phase and the Fe content (x=0.01 and 0.03), an extra spin-pumping is observed below 250 K. Display Omitted Research Highlights: {yields} The g-values of the ESR spectra reveal that the isolated rhombic Fe{sup 3+} ion in rutile phase. {yields} The line width of ESR increases with increase in the Fe{sup 3+}-content due to the ion induced disorder effect. {yields} The magnetization confirms that the Fe{sup 3+}-ions have weak antiferromagnetic interactions.

36 MATERIALS SCIENCE↗

Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f{sub t}=kt{sup n} was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties. - Graphical abstract: Loading (A) and release profiles (B) of aspirin in N-BMMs and N-MCM-41 indicated that BMMs have more drug loading capacity and faster release rate than that MCM-41. Highlights: > Bimodal mesoporous silicas (BMMs) and MCM-41 modified with amino group via post-treatment procedure. > Loading and release profiles of aspirin in modified BMMs and MCM-41. > Modified BMMs have more drug loading capacity and faster release rate than that modified MCM-41.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of doping, microstructure, and CO{sub 2} on La{sub 2}NiO{sub 4+{delta}}-based oxygen-transporting materials

Alkaline earth-free La{sub 2}NiO{sub 4+{delta}} based materials were synthesized by a sol-gel method and studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques as well as oxygen permeation experiments. Effects of doping the nickel position with a variety of cations (Al, Co, Cu, Fe, Mg, Ta, and Zr) were investigated with regards to oxygen flux and microstructure. Doping was always found to diminish the oxygen flux as compared to the reference composition. However, larger grains, which were achieved by longer annealing times at 1723 K have a minor negative impact on oxygen permeation flux in case of La{sub 2}NiO{sub 4+{delta}} and La{sub 2}Ni{sub 0.9}Fe{sub 0.1}O{sub 4+{delta}} system. Moessbauer spectroscopy shows that the iron-doped system exhibits a secondary phase, which was identified by high-resolution transmission electron microscopy (HRTEM) as a higher Ruddlesden-Popper phase. In-situ XRD in an atmosphere containing 50 vol% CO{sub 2} and long-term oxygen permeation experiments using pure CO{sub 2} as the sweep gas revealed a high tolerance of the materials towards CO{sub 2}. - Graphical Abstract: The vibrational polished La{sub 2}Ni{sub 0.9}Fe{sub 0.1}O{sub 4+{delta}} membrane revealed formation of secondary phases, which were confirmed by Moessbauer spectroscopy. Highlights: Black-Right-Pointing-Pointer La{sub 2}NiO{sub 4+{delta}} systematically doped with different valent cations. Black-Right-Pointing-Pointer Large grains have a negative impact on oxygen-permeation performance. Black-Right-Pointing-Pointer CO{sub 2}-stability proved by in-situ XRD in 50 vol% CO{sub 2}. Black-Right-Pointing-Pointer Constant long-term permeation in presence of CO{sub 2}. Black-Right-Pointing-Pointer Moessbauer and TEM reveal multiple phases in La{sub 2}Ni{sub 0.9}Fe{sub 0.1}O{sub 4+{delta}} system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anti-contamination device for cryogenic soft X-ray diffraction microscopy

Cryogenic microscopy allows one to view frozen hydrated biological and soft matter specimens with good structural preservation and a high degree of stability against radiation damage. We describe a liquid nitrogen-cooled anti-contamination device for cryogenic X-ray diffraction microscopy. The anti-contaminator greatly reduces the buildup of ice layers on the specimen due to condensation of residual water vapor in the experimental vacuum chamber. We show by coherent X-ray diffraction measurements that this leads to fivefold reduction of background scattering, which is important for far-field X-ray diffraction microscopy of biological specimens.

36 MATERIALS SCIENCE↗

Uniform AMoO{sub 4}:Ln (A=Sr{sup 2+}, Ba{sup 2+}; Ln=Eu{sup 3+}, Tb{sup 3+}) submicron particles: Solvothermal synthesis and luminescent properties

Rare-earth ions (Eu{sup 3+}, Tb{sup 3+}) doped AMoO{sub 4} (A=Sr, Ba) particles with uniform morphologies were successfully prepared through a facile solvothermal process using ethylene glycol (EG) as protecting agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are of high purity and crystallinity and assigned to the tetragonal scheelite-type structure of the AMoO{sub 4} phase. It has been shown that the as-synthesized SrMoO{sub 4}:Ln and BaMoO{sub 4}:Ln samples show respective uniform peanut-like and oval morphologies with narrow size distribution. The possible growth process of the AMoO{sub 4}:Ln has been investigated in detail. The EG/H{sub 2}O volume ratio, reaction temperature and time have obvious effect on the morphologies and sizes of the as-synthesized products. Upon excitation by ultraviolet radiation, the AMoO{sub 4}:Eu{sup 3+} phosphors show the characteristic {sup 5}D{sub 0}-{sup 7}F{sub 1-4} emission lines of Eu{sup 3+}, while the AMoO{sub 4}:Tb{sup 3+} phosphors exhibit the characteristic {sup 5}D{sub 4}-{sup 7}F{sub 3-6} emission lines of Tb{sup 3+}. These phosphors exhibit potential applications in the fields of fluorescent lamps and light emitting diodes (LEDs). - Graphical abstract: Uniform rare-earth ions (Eu{sup 3+}, Tb{sup 3+}) doped AMoO{sub 4} (A=Sr, Ba) submicron phosphors with tetragonal scheelite-type structure have been prepared through a facile solvothermal process using EG as reaction media. Display Omitted

36 MATERIALS SCIENCE↗

Polyol-mediated solvothermal synthesis and luminescence properties of CeF{sub 3}, and CeF{sub 3}:Tb{sup 3+} nanocrystals

CeF{sub 3} and CeF{sub 3}:Tb{sup 3+} nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH{sub 4}F and reactant concentrations were key factors in the product shape and size. Excessive NH{sub 4}F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH{sub 4}F content and reactant concentrations. In addition, Tb{sup 3+} doped-CeF{sub 3} sample shows strong green emission centered at 544 nm corresponding to the {sup 5}D{sub 4}-{sup 7}F{sub 5} transition of Tb{sup 3+}. Due to the decrease of nonradiative decay rate, the lifetime of {sup 5}D{sub 4} level of Tb{sup 3+} become longer gradually upon increasing the size of product. -- Graphical abstract: 0D nanoparticles and 2D nanoplates CeF{sub 3} and CeF{sub 3}:Tb{sup 3+} have been successfully fabricated through a facile polyol process. Display Omitted Research highlights: {yields} 0D nanoparticles and 2D nanoplates CeF{sub 3} were fabricated by polyol process. {yields} Morphology of product depends on the content of NH{sub 4}F and reactant concentrations. {yields} CeF{sub 3}:Tb{sup 3+} shows strong green emission via Ce{sup 3+}-Tb{sup 3+} energy transfer route. {yields} Decay process of {sup 5}D{sub 4} level of Tb{sup 3+} tends to slower increasing the size of products.

36 MATERIALS SCIENCE↗

Phase composition and magnetic properties of niobium-iron codoped TiO{sub 2} nanoparticles synthesized in Ar/O{sub 2} radio-frequency thermal plasma

Nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} with various Nb{sup 5+} concentrations (Nb/(Ti+Fe+Nb)=0-10.0 at%) and Fe{sup 3+} (Fe/(Ti+Fe+Nb)=0-2.0 at%) were synthesized using Ar/O{sub 2} thermal plasma. Dopant content, chemical valence, phase identification, morphology and magnetic properties were determined using several characterization techniques, including inductively coupled plasma-optical emission spectrometer, X-ray photoelectron spectroscopy, X-ray diffraction, UV-vis diffuse reflectance spectrometer, field-emission scanning electron microscopy, transmission electron microscopy and SQUID commercial instrument. The XRD revealed that all the plasma-synthesized powders were exclusively composed of anatase as major phase and rutile. The rutile weight fraction was increased by the substitution of Fe{sup 3+} for Ti{sup 4+} whereas it was reduced by the Nb{sup 5+} doping. The plasma-synthesized Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} powders had intrinsic magnetic properties of strongly paramagnetic and feebly ferromagnetic at room temperature. The ferromagnetic properties gradually deteriorated as the Fe{sup 3+} concentration was decreased, suggesting that the ferromagnetism was predominated by the phase composition as a carrier-mediated exchange. - Graphical Abstract: Spherical nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} were synthesized using Ar/O{sub 2} thermal plasma. The plasma-synthesized powders were composed of anatase as major phase and rutile. Rutile weight fraction was increased by Fe{sup 3+} addition but was reduced by Nb{sup 5+} doping. Strongly paramagnetic and feebly ferromagnetic properties are of intrinsic nature. Ferromagnetic properties gradually deteriorated as Fe{sup 3+} concentration was increased. Highlights: > Nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} were synthesized using Ar/O{sub 2} thermal plasma. > The plasma-synthesized powders were composed of anatase as major phase and rutile. > Rutile weight fraction was increased by Fe{sup 3+} addition but was reduced by Nb{sup 5+} doping. > Strongly paramagnetic and feebly ferromagnetic properties are of intrinsic nature. > Ferromagnetic properties gradually deteriorated as Fe{sup 3+} concentration was increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

{beta}-connectin studies by small-angle x-ray scattering and single-molecule force spectroscopy by atomic force microscopy

The three-dimensional structure and the mechanical properties of a {beta}-connectin fragment from human cardiac muscle, belonging to the I band, from I{sub 27} to I{sub 34}, were investigated by small-angle x-ray scattering (SAXS) and single-molecule force spectroscopy (SMFS). This molecule presents an entropic elasticity behavior, associated to globular domain unfolding, that has been widely studied in the last 10 years. In addition, atomic force microscopy based SMFS experiments suggest that this molecule has an additional elastic regime, for low forces, probably associated to tertiary structure remodeling. From a structural point of view, this behavior is a mark of the fact that the eight domains in the I{sub 27}-I{sub 34} fragment are not independent and they organize in solution, assuming a well-defined three-dimensional structure. This hypothesis has been confirmed by SAXS scattering, both on a diluted and a concentrated sample. Two different models were used to fit the SAXS curves: one assuming a globular shape and one corresponding to an elongated conformation, both coupled with a Coulomb repulsion potential to take into account the protein-protein interaction. Due to the predominance of the structure factor, the effective shape of the protein in solution could not be clearly disclosed. By performing SMFS by atomic force microscopy, mechanical unfolding properties were investigated. Typical sawtooth profiles were obtained and the rupture force of each unfolding domain was estimated. By fitting a wormlike chain model to each peak of the sawtooth profile, the entropic elasticity of octamer was described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure induced reactions amongst calcium aluminate hydrate phases

The compressibilities of two AFm phases (straetlingite and calcium hemicarboaluminate hydrate) and hydrogarnet were obtained up to 5 GPa by using synchrotron high-pressure X-ray powder diffraction with a diamond anvil cell. The AFm phases show abrupt volume contraction regardless of the molecular size of the pressure-transmitting media. This volume discontinuity could be associated to a structural transition or to the movement of the weakly bound interlayer water molecules in the AFm structure. The experimental results seem to indicate that the pressure-induced dehydration is the dominant mechanism especially with hygroscopic pressure medium. The Birch-Murnaghan equation of state was used to compute the bulk modulus of the minerals. Due to the discontinuity in the pressure-volume diagram, a two stage bulk modulus of each AFm phase was calculated. The abnormal volume compressibility for the AFm phases caused a significant change to their bulk modulus. The reliability of this experiment is verified by comparing the bulk modulus of hydrogarnet with previous studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and visible light photocatalytic activity of Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} heterojunction photocatalysts

The Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} heterojunction photocatalysts were prepared by a two-step solvothermal process using Bi(NO{sub 3}){sub 3}-ethylene glycol solution as Bi source. The catalysts were characterized by X-ray diffraction, scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflection spectroscopy. The heterostructure catalysts are composed of Bi{sub 2}O{sub 3} nanoparticles as modifier and 3D Bi{sub 2}WO{sub 6} microspheres as substrate. Bi{sub 2}O{sub 3} nanoparticles with diameters of about 10-15 nm are tightly grown on the lateral surface of the Bi{sub 2}WO{sub 6} microspheres. The hierarchical Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} microspheres exhibit higher photocatalytic activity than the single phase Bi{sub 2}WO{sub 6} or Bi{sub 2}O{sub 3} for the degradation of rhodamine B under visible light illumination ({lambda}>420 nm). The enhancement of the photocatalytic activity of the Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} heterojunction catalysts can be ascribed to their improved light absorption property and the reduced recombination of the photoexcited electrons and holes during the photocatalytic reaction. The effect of loading amount of Bi{sub 2}O{sub 3} on the catalytic performance of the heterojunction catalysts was also investigated and the optimal content of Bi{sub 2}O{sub 3} is 3 wt%. The Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} heterojunction photocatalysts are essentially stable during the photocatalytic process. - Graphical abstract: The Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} heterojunction catalysts were constructured with improved photocatalytic activity, which can be ascribed to their improved light absorption property and the reduced recombination rate between photoexcited electrons and holes. Highlights: > Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} heterojunction photocatalysts. > Effective separation of photoexcited electrons and holes. > High visible light photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oriented SrFe{sub 12}O{sub 19} thin films prepared by chemical solution deposition

Thin films of SrFe{sub 12}O{sub 19} (SrM) were prepared from a solution of iron and strontium alkoxides through the chemical solution deposition method on both amorphous (glassy SiO{sub 2}), and single crystal substrates (Si(100), Si(111), Ag(111), Al{sub 2}O{sub 3}(001), MgO(111), MgAl{sub 2}O{sub 4}(111), SrTiO{sub 3}(111)) substrates. The process of crystallization was investigated by means of powder diffraction, atomic force microscopy and scanning electron microscopy. Magnetization measurements, ferromagnetic and nuclear magnetic resonance were used for evaluation of anisotropy in the films. Whilst amorphous substrates enabled growth of randomly oriented SrM phase, use of single crystal substrates resulted in samples with different degree of oriented growth. The most pronounced oriented growth was observed on SrTiO{sub 3}(111). A detailed inspection revealed that growth of SrM phase starts through the breakup of initially continuous film into isolated grains with expressive shape anisotropy and hexagonal habit. A continuous film with epitaxial relations to the substrate was produced by repeating recoating and annealing. - Graphical Abstract: XRD and AFM patterns of SrFe{sub 12}O{sub 19} thin film epitaxially grown on SrTiO{sub 3}(111) single crystal using seeding layer templating. Highlights: > Single phase SrFe{sub 12}O{sub 19} thin films prepared by chemical solution deposition. > Epitaxial growth on SrTiO{sub 3}(111) with (00l)SrM//(111)SrTiO{sub 3}, <110>SrM//<110>SrTiO{sub 3}). > Seed layer breaks into isolated single crystal islands and serves as a template. > Larger seed grains grow by consuming the grains within the bulk of recoated film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the surface chemistry and morphology of single walled carbon nanotube-magnetite composites

The study of the morphologies of the single walled carbon nanotube (SWCNT), magnetite nanoparticles (MNP), and the composite based on them was carried with combined X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). These techniques together with thermogravimetric analyses (TGA) and diffuse reflectance infrared transform spectroscopy (DRIFTS) confirmed the production of pure single phases, and that the composite material consisted of MNP attached to the outer surface of the SWCNT. The Moessbauer spectroscopy (MS) research showed the presence of a large quantity of Lewis acid sites in the highly dispersed magnetite particles supported on the SWCNT outer surface. The DRIFTS carbon dioxide adsorption study of the composites revealed significant adsorption of carbon dioxide, fundamentally in the Lewis acid sites. Then, the Lewis acid sites were observed to be catalytically active. Further, the electron exchange between the Lewis acid sites and the basic or amphoteric adsorbed molecules could influence the magnetic properties of the magnetite. Consequently, together with this first ever use of MS in the study of Lewis acid sites, this investigation revealed the potential of the composites for catalytic and sensors applications. -- Graphical abstract: A large amount of Lewis acid sites were found in the highly dispersed magnetite which is supported on the SWCNT outer surface. Display Omitted Research highlights: {yields} The obtained materials were completely characterized with XRD, Raman and SEM-TEM. {yields} DRIFT, TGA and adsorption of the composites allowed understand the material formation. {yields} This is the first report of a study of Lewis sites by Moessbauer spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and characterization of Zr doped TiO{sub 2} nanotube arrays on the titanium sheet and their enhanced photocatalytic activity

This paper described a new method for the preparation of Zr doped TiO{sub 2} nanotube arrays by electrochemical method. TiO{sub 2} nanotube arrays were prepared by anodization with titanium anode and platinum cathode. Afterwards, the formed TiO{sub 2} nanotube arrays and Pt were used as cathode and anode, respectively, for preparation of Zr/TiO{sub 2} nanotube arrays in the electrolyte of 0.1 M Zr(NO{sub 3}){sub 4} with different voltage and post-calcination process. The nanotube arrays were characterized by field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and UV-Vis diffusion reflection spectra (DRS). The photocatalytic activities of these nanotubes were investigated with Rhodamine B as the model pollutant and the results demonstrated that the photocatalytic efficiency of Zr doped TiO{sub 2} nanotubes was much better than that of TiO{sub 2} nanotubes under UV irradiation. Zr/TiO{sub 2} nanotube arrays doped at 7 V and calcined at 600 deg. C (denoted as TiO{sub 2}-7 V-600) achieved the best photocatalytic efficiency and the most optimal doping ratio was 0.047 (Zr/Ti). TiO{sub 2}-7 V-600 could be reused for more than 20 times and maintained good photocatalytic activities. - Graphical abstract: Zr-doped TiO{sub 2} nanotube arrays were prepared by two-step electrochemical process. The photocatalytic efficiency of Zr/TiO{sub 2} was much better than that of TiO{sub 2} nanotubes under UV irradiation. Nanotube arrays prepared by this method could be reused for more than 20 times and maintained good photocatalytic activities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Constructing magnetic polyaniline/metal hybrid nanostructures using polyaniline/Fe{sub 3}O{sub 4} composite hollow spheres as supports

Polyaniline (PANI)/Fe{sub 3}O{sub 4} composite hollow spheres have been successfully synthesized in one step using sulfonated polystyrene (PS) spheres as templates. The magnetic PANI hollow spheres were used as supports for noble metal nanoparticles (NPs) such as Au and Pd. The morphology, composition and magnetic properties of the resulting products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, inductively coupled plasma (ICP) atomic spectra and vibrating sample magnetometer. The catalytic activity of magnetic PANI/Au composite shells on the oxidation of dopamine was investigated by cyclic voltammetry. The obtained results provide our product with a practical application for the detection of dopamine. On the other hand, the catalytic activity of magnetic PANI/Pd composite shells on the reduction of 4-nitroaniline was investigated by spectroscopic methods and compared with Pd/C catalyst which was already widely used in industrial production. - Graphical abstract: TEM image of PANI/Fe{sub 3}O{sub 4} hollow spheres which can be used as supports for a variety of catalysts such as noble metal nanoparticles. Based on the unique properties of polyaniline hollow spheres and Fe{sub 3}O{sub 4} NPs, we designed the synthesis of polyaniline/Fe{sub 3}O{sub 4} NPs composite hollow spheres as supports for catalysts such as noble metal NPs. As a result, the obtained composites exhibit enhanced catalytic activities and can be easily separated from reaction mixture by using an NdFeB permanent magnet.

77 NANOSCIENCE AND NANOTECHNOLOGY↗