Search NASA⌕ Search

SEARCH · Search NASA

Results for “cold atom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Iron catalyst chemistry in modeling a high-pressure carbon monoxide nanotube reactor

The high-pressure carbon monoxide (HiPco) technique for producing single-wall carbon nanotubes (SWNTs) is analyzed with the use of a chemical reaction model coupled with flow properties calculated along streamlines, calculated by the FLUENT code for pure carbon monoxide. Cold iron pentacarbonyl, diluted in CO at about 30 atmospheres, is injected into a conical mixing zone, where hot CO is also introduced via three jets at 30 degrees with respect to the axis. Hot CO decomposes the Fe(CO)5 to release atomic Fe. Then iron nucleates and forms clusters that catalyze the formation of SWNTs by a disproportionation reaction (Boudouard) of CO on Fe-containing clusters. Alternative nucleation rates are estimated from the theory of hard sphere collision dynamics with an activation energy barrier. The rate coefficient for carbon nanotube growth is estimated from activation energies in the literature. The calculated growth was found be about an order of magnitude greater than measured, regardless of the nucleation rate. A study of cluster formation in an incubation zone prior to injection into the reactor shows that direct dimer formation from Fe atoms is not as important as formation via an exchange reaction of Fe with CO in FeCO.

Evaluation Studies↗

Shear coaxial injector atomization phenomena for combusting and non-combusting conditions

Measurements of LOX drop size and velocity in a uni-element liquid propellant rocket chamber are presented. The use of the Phase Doppler Particle Analyzer in obtaining temporally-averaged probability density functions of drop size in a harsh rocket environment has been demonstrated. Complementary measurements of drop size/velocity for simulants under cold flow conditions are also presented. The drop size/velocity measurements made for combusting and cold flow conditions are compared, and the results indicate that there are significant differences in the two flowfields.

Pal, S.↗

Thermal phases of interstellar and quasar gas

Interstellar gas may be in a variety of thermal phases, depending on how it is heated and ionized; here a unified picture of the equation of state of interstellar and quasar gas is presented for a variety of such mechanisms over a broad range of temperatures, densities, and column densities of absorbing matter. It is found that for select ranges of gas pressure, photoionizing flux, and heating, three thermally stable phases are allowed: coronal gas (T above 100,000 K); warm gas (T about 10,000 K); and cold gas (T less than 100 K). With attenuation of ultraviolet and X-ray radiation, the cold phase may undergo a transition to molecules. In quasar broad-line clouds, this transition occurs at column density N(H) = about 10 to the 23rd/sq cm and could result in warm molecular cores and observable emission from H2 and OH. The underlying atomic physics behind each of these phase transitions and their relevance to interstellar matter and quasars are discussed.

Lepp, S.↗

Applications of a Venus thermospheric circulation model

A variety of Pioneer Venus observations suggest a global scale, day-to-night Venus thermospheric circulation. Model studies of the dynamics and energetics of the Venus thermosphere are presented in order to address new driving, mixing and cooling mechanisms for an improved model simulation. The adopted approach was to reexamine the circulation by first using a previous two dimensional code to quantify those physical processes which can be inferred from the Pioneer Venus observations. Specifically, the model was used to perform sensitivity studies to determine the degree to which eddy cooling, eddy or wave drag, eddy diffusion and 15 micrometer radiational cooling are necessary to bring the model temperature and composition fields into agreement with observations. Three EUV heating cases were isolated for study. Global temperature and composition fields in good agreement with Pioneer data were obtained. Large scale horizontal winds 220 m/s were found to be consistent with the observed cold nightside temperatures and dayside bulges of O, CO and CO2. Observed dayside temperatures were obtained by using a 7 to 19% EUV heating efficiency profile. The enhanced 15 micrometer cooling needed for thermal balance is obtained using the best rate coefficient available for atomic O collisional excitation of CO2(0,1,0). Eddy conduction was not found to be a viable cooling mechanism due to the weakened global circulation. The strong 15 micrometer damping and low EUV efficiency imply a very weak dependence of the general circulation to solar cycle variability. The NCAR terrestrial thermospheric general circulation model was adapted for Venus inputs using the above two dimensional model parameters, to give a three dimensional benchmark for future Venus modelling work.

Bougher, S. W.↗

Thermally Mobile Trace Elements in Carbonaceous Chondrites from Cold and Hot Deserts

Some decades ago, Anders and co-workers used RNAA to classify a number of trace elements as being volatile during nebular condensation and accretion into primitive objects based upon their strong depletion in (equilibrated) ordinary chondrites relative to C1 chondrites. Such elements, e.g. Ag, Bi, Cd, Cs, In, Se, Te, Tl, Zn and others, exhibit nearly constant, C1-normalized atomic abundances in C2 (CM2) and in C3 chondrites. They interpreted the near-constancy of these abundances according to a 2-component model in which volatiles were introduced into carbonaceous (and other) chondrites as Cl material which was diluted with differing proportions of high-temperature (i.e. volatile-free) components. In this view, mean volatile element abundances of 0.48 in C2 and 0.24-0.29 x C1 in C3 chondrites indicated that C2 and C3 chondrites are, respectively, about 1:1 and 1:2-3 mixtures of Cl-like and high temperature materials. More recently, C1 normalized abundances of such volatile elements are nearly constant in most C2-6 chondrites (i.e. 25 non-Antarctic meteorites, nearly all falls, and 36 Antarctic finds) consistent with a 2- component mixing model. However, rather than being quantized, mean volatile element contents in each chondrite define a continuum from 0.92-0.14 x Cl for these 61 chondrites. A few carbonaceous chondrites - the first having been the NIPR consortium samples B-7904, Y-82162 and Y-86720 - show an altered pattern: many of the volatile elements in each exhibit the usual constancy of C1-normalized atomic abundances, but modified by further depletion of Cd and other elements like Tl and Bi. These are the most mobile trace elements, i.e. those most readily vaporized and lost from primitive meteorites during week-long heating at greater than or equal to 400 C under low ambient pressures (initially 10 (exp -5) atm H2), simulating metamorphic conditions in a primitive parent body. Similarities between mobile element data for B-7904, Y-82162 and Y-86720 with those for Murchison heated at 500-700 C suggest that these Antarctic C1 and C2-like chondrites were metamorphosed at temperatures like these in the interiors of their parent bodies. Metamorphic temperatures inferred from RNAA data and textural/mineralogic alterations are internally consistent, agreeing with those evident in heated Murchison samples. These 3 chondrites were also heated late in their histories since all have lost cosmogenic 3-He, presumably during close solar approach, and B-7904 and Y-86720 seem also to have lost substantial proportions of radiogenic He-4 and Ar-40, cf. data. Similarities in spectral reflectance data for C-, G-, B- and F- asteroids, for these meteorites and for heated Murchison samples suggest that thermally metamorphosed interior materials in these asteroids were excavated by impacts and re-deposited on them, forming their present surfaces. Establishment of the thermal metamorphic histories of carbonaceouis chondrites, then, is essential to establishing the evolution and present-day nature of C-type and related asteroids.

Lipschutz, M. E.↗

Thermally Mobile Trace Elements in Carbonaceous Chondrites From Cold and Hot Deserts

Some decades ago, Anders and co-workers used RNAA to classify a number of trace elements as being volatile during nebular condensation and accretion into primitive objects based upon their strong depletion in (equilibrated) ordinary chondrites relative to C1 chondrites. Such elements, e.g. Ag, Bi, Cd, Cs, In, Se, Te, Tl, Zn and others, exhibit nearly constant, C1-normalized atomic abundances in C2 (CM2) and in C3 chondrites. They interpreted the near-constancy of these abundances according to a 2-component model in which volatiles were introduced into carbonaceous (and other) chondrites as C1 material which was diluted with differing proportions of high-temperature (i.e. volatile-free) components. In this view, mean volatile element abundances of 0.48 in C2 and 0.24-0.29 x C1 in C3 chondrites indicated that C2 and C3 chondrites are, respectively, about 1:1 and 1:2-3 mixtures of C1-like and high temperature materials. More recently, Xiao and Lipschutz found that C-normalized abundances of such volatile elements are nearly constant in most C2-6 chondrites (i.e. 25 non-Antarctic meteorites, nearly all falls, and 36 Antarctic finds) consistent with a 2-component mixing model. However, rather than being quantized, mean volatile element contents in each chondrite define a continuum from 0.92-0.14 x C1 for these 61 chondrites. A few carbonaceous chondrites, the first having been the NIPR consortium samples B-7904, Y-82162 and Y-86720, show an altered pattern: many of the volatile elements in each exhibit the usual constancy of C1-normalized atomic abundances, but modified by further depletion of Cd and other elements like Tl and Bi. These are the most mobile trace elements, i.e. those most readily vaporized and lost from primitive meteorites during week-long heating at greater than or equal to 400 C under low ambient pressures (initially 10(exp -5) atm H2), simulating metamorphic conditions in a primitive parent body. Similarities between mobile element data for B-7904, Y-82162 and Y-86720 with those for Murchison heated at 500-700 C, suggest that these Antarctic C1 - and C2-like chondrites were metamorphosed at temperatures like these in the interiors of their parent bodies. Metamorphic temperatures inferred from RNAA data and textural/mineralogic alterations are internally consistent, agreeing., with those evident in heated Murchison samples. These 3 chondrites were also heated late in their histories since all have lost cosmogenic He-3, presumably during close solar approach, and B-7904 and Y-86720 seem also to have lost substantial proportions of radiogenic He-4 and Ar-40 cf. data in. Similarities in spectral reflectance data for C-, G-, B- and F- asteroids, for these meteorites and for heated Murchison samples suggest that thermally metamorphosed interior materials in these asteroids were excavated by impacts and re-deposited on them, forming their present surfaces. Establishment of the thermal metamorphic histories of carbonaceous chondrites, then, is essential to establishing the evolution and present-day nature of C-type and related asteroids.

Lipschutz, M. E.↗

DMSP Spacecraft Charging in Auroral Environments

The Defense Meteorological Satellite Program (DMSP) spacecraft are a series of low-earth orbit (LEO) satellites whose mission is to observe the space environment using the precipitating energetic particle spectrometer (SSJ/4-5). DMSP satellites fly in a geosynchronous orbit at approx.840 km altitude which passes through Earth s ionosphere. The ionosphere is a region of partially ionized gas (plasma) formed by the photoionization of neutral atoms and molecules in the upper atmosphere of Earth. For satellites in LEO, such as DMSP, the plasma density is usually high and the main contributors to the currents to the spacecraft are the precipitating auroral electrons and ions from the magnetosphere as well as the cold plasma that constitutes the ionosphere. It is important to understand how the ionosphere and auroral electrons can accumulate surface charges on satellites because spacecraft charging has been the cause of a number of significant anomalies for on-board instrumentation on high altitude spacecraft. These range from limiting the sensitivity of measurements to instrument malfunction depending on the magnitude of the potential difference over the spacecraft surface. Interactive Data Language (IDL) software was developed to process SSJ/4-5 electron and ion data and to create a spectrogram of the particles number and energy fluxes. The purpose of this study is to identify DMSP spacecraft charging events and to present a preliminary statistical analysis. Nomenclature

Colson, Andrew↗

Heavy ions in the outer Kronian magnetosphere

The possible sources of the cold plasma observed in the outer magnetosphere of Saturn are analyzed. On the basis of the O(+)-H charge exchange species-specific loss mechanism, as well as abundance and rate considerations, it is concluded that the dominant heavy ion populating the equatorial outer magnetosphere is that of atomic nitrogen. Possible sources of hot plasma are also discussed, as are the inhibition of corotation by mass loading and the radial variation of composition. It is found that the observed deviations from corotation and current mass loading estimates indicate either a somewhat higher ionospheric conductance than is implied by the UVS and RSS measurements, or an overestimate of mass loading. It is suggested that the plasma gap observed by Voyager 1 outbound may be associated with a composition change.

Eviatar, A.↗

Silicon purification using a Cu-Si alloy source

Production of 99.9999% pure silicon from 98% pure metallurgical grade (MG) silicon by a vapor transport filtration process (VTP) is described. The VTF process is a cold wall version of an HCl chemical vapor transport technique using a Si:Cu3Si alloy as the silicon source. The concentration, origin, and behavior of the various impurities involved in the process were determined by chemically analyzing alloys of different purity, the slag formed during the alloying process, and the purified silicon. Atomic absorption, emission spectrometry, inductively coupled plasma, spark source mass spectrometry, and secondary ion mass spectroscopy were used for these analyses. The influence of the Cl/H ratio and the deposition temperature on the transport rate was also investigated.

Powell, R. C.↗

Impact of low-temperature plasmas on Deinococcus radiodurans and biomolecules

The effects of cold plasma on Deinococcus radiodurans, plasmid DNA, and model proteins were assessed using microbiological, spectrometric, and biochemical techniques. In low power O(2) plasma (approximately 25 W, approximately 45 mTorr, 90 min), D. radiodurans, a radiation-resistant bacterium, showed a 99.999% reduction in bioburden. In higher power O(2) plasma (100 W and 500 mTorr), the reduction rate increased about 10-fold and observation by atomic force microscopy showed significant damage to the cell. Damage to cellular lipids, proteins, and chromosome was indicated by losses of infrared spectroscopic peaks at 2930, 1651, 1538, and 1245 cm(-1), respectively. In vitro experiments show that O(2) plasmas induce DNA strand scissions and cross-linking as well as reduction of enzyme activity. The observed degradation and removal of biomolecules was power-dependent. Exposures to 200 W at 500 mTorr removed biomolecules to below detection limits in 60 s. Emission spectroscopy indicated that D. radiodurans cells were volatilized into CO(2), CO, N(2), and H(2)O, confirming that these plasmas were removing complex biological matter from surfaces. A CO(2) plasma was not as effective as the O(2) plasma, indicating the importance of plasma composition and the dominant role of chemical degradation. Together, these findings have implications for NASA planetary protection schemes and for the contamination of Mars.

Evaluation Studies↗

Silicon chemistry in interstellar clouds

A new model of interstellar silicon chemistry is presented that explains the lack of SiO detections in cold clouds and contains an exponential temperature dependence for the SiO abundance. A key aspect of the model is the sensitivity of SiO production by neutral silicon reactions to density and temperature, which arises from the dependence of the rate coefficients on the population of the excited fine-structure levels of the silicon atom. As part of the explanation of the lack of SiO detections at low temperatures and densities, the model also emphasizes the small efficiencies of the production routes and the correspondingly long times needed to reach equilibrium. Measurements of the abundance of SiO, in conjunction with theory, can provide information on the physical properties of interstellar clouds such as the abundance of oxygen bearing molecules and the depletion of interstellar silicon.

Langer, William D.↗

Silicon chemistry in interstellar clouds

Interstellar SiO was discovered shortly after CO but it has been detected mainly in high density and high temperature regions associated with outflow sources. A new model of interstellar silicon chemistry that explains the lack of SiO detections in cold clouds is presented which contains an exponential temperature dependence for the SiO abundance. A key aspect of the model is the sensitivity of SiO production by neutral silicon reactions to density and temperature, which arises from the dependence of the rate coefficients on the population of the excited fine structure levels of the silicon atom. This effect was originally pointed out in the context of neutral reactions of carbon and oxygen by Graff, who noted that the leading term in neutral atom-molecule interactions involves the quadrupole moment of the atom. Similar to the case of carbon, the requirement that Si has a quadrupole moment requires population of the J = 1 level, which lies 111K above the J = 0 ground state and has a critical density n(cr) equal to or greater than 10(6)/cu cm. The SiO abundance then has a temperature dependence proportional to exp(-111/T) and a quadratic density dependence for n less than n(cr). As part of the explanation of the lack of SiO detections at low temperatures and densities, this model also emphasizes the small efficiencies of the production routes and the correspondingly long times needed to reach equilibrium. Measurements of the abundance of SiO, in conjunction with theory, can provide information on the physical properties of interstellar clouds such as the abundances of oxygen bearing molecules and the depletion of interstellar silicon.

Langer, William D.↗

Detailed investigation of a vaporising fuel spray. Part 1: Experimental investigation of time averaged spray

A laser tomographic light scattering technique provides rapid and accurate high resolution measurements of droplet sizes, concentrations, and vaporization. Measurements using a computer interfaced thermocouple are presented and it is found that the potential exists for separating gas and liquid temperature measurements and diagnosing local spray density by in situ analysis of the response characteristics of the thermocouple. The thermocouple technique provides a convenient means for measuring mean gas velocity in both hot and cold two phase flows. The experimental spray is axisymmetric and has carefully controlled initial and boundary conditions. The flow is designed to give relatively insignificant transfer of momentum and mass from spray to air flow. The effects of (1) size-dependent droplet dispersion by the turbulence, (2) the initial spatial segregation of droplet sizes during atomization, and (3) the interaction between droplets and coherent large eddies are diagnosed.

Yule, A. J.↗

Results and progress on the NASA Lewis H2-O2 MHD program

A rocket test facility at the NASA Lewis Research Center has been used to develop interelectrode insulating materials, measure heat losses, and determine the fluid dynamic and electrical properties of MHD ducts and the cesium-seeded H2-O2 working fluid. Test results show that flame sprayed ceramic coatings on combustion chamber and nozzle walls permit operation with hot walls, eliminating problems associated with seed condensation; however, the net heat transfer was unexpectedly increased over that of cold copper walls. Pressure disturbances associated with oblique pressure waves were measured in a rocket nozzle designed to achieve low weight rather than perfectly parallel flow at the exit. Electrical conductivity measurements were in good agreement with theory except at low combustion pressures and/or high seed/oxygen mass flow ratios. The discrepancy is thought to result from poor atomization of the seed, producing droplets which do not completely vaporize during their residence time.

Smith, J. M.↗

Mass and energy balance of the cold Io torus

A new model of the cold Io torus is described. Ions and energy are injected into the system by independent processes so that the mass balance is isolated from the energy balance. The primary source of energy is local ionization and acceleration of hot pickup ions resulting from charge exchange between thermal ions and an extended cloud of Iogenic sulfur and oxygen atoms. The primary energy loss mechanism of the plasma is collisionally excited line emission at optical wavelengths. The primary ion source is radial diffusion inward from the hot torus on a time scale of 140-710 days. The primary ion loss mechanism is a novel two-step enhanced recombination mechanism involving charge exchange between thermal ions and an extended cloud of neutral SO2 molecules, followed by rapid dissociative recombination of the resultant molecular ion. The model provides a self-consistent solution which reconciles a number of diverse observations with known physical processes.

Moreno, M. A.↗

Turbulent mixing layers in the interstellar medium of galaxies

We propose that turbulent mixing layers are common in the interstellar medium (ISM). Injection of kinetic energy into the ISM by supernovae and stellar winds, in combination with density and temperature inhomogeneities, results in shear flows. Such flows will become turbulent due to the high Reynolds number (low viscosity) of the ISM plasma. These turbulent boundary layers will be particularly interesting where the shear flow occurs at boundaries of hot (approximately 10(exp 6) K) and cold or warm (10(exp 2) - 10(exp 4) K) gas. Mixing will occur in such layers producing intermediate-temperature gas at T is approximately equal to 10(exp 5.0) - 10(exp 5.5) that radiates strongly in the optical, ultraviolet, and EUV. We have modeled these layers under the assumptions of rapid mixing down to the atomic level and steady flow. By including the effects of non-equilibrium ionization and self-photoionization of the gas as it cools after mixing, we predict the intensities of numerous optical, infrared, and ultraviolet emission lines, as well as absorption column densities of C 4, N 5, Si 4, and O 6.

Slavin, J. D.↗

Large Engine Technology Program. Task 22: Variable Geometry Concepts for Rich-Quench-Lean Combustors

The objective of the task reported herein was to define, evaluate, and optimize variable geometry concepts suitable for use with a Rich-Quench-Lean (RQL) combustor. The specific intent was to identify approaches that would satisfy High Speed Civil Transport (HSCT) cycle operational requirements with regard to fuel-air ratio turndown capability, ignition, and stability margin without compromising the stringent emissions, performance, and reliability goals that this combustor would have to achieve. Four potential configurations were identified and three of these were refined and tested in a high-pressure modular RQL combustor rig. The tools used in the evolution of these concepts included models built with rapid fabrication techniques that were tested for airflow characteristics to confirm sizing and airflow management capability, spray patternation, and atomization characterization tests of these models and studies that were supported by Computational Fluid Dynamics analyses. Combustion tests were performed with each of the concepts at supersonic cruise conditions and at other critical conditions in the flight envelope, including the transition points of the variable geometry system, to identify performance, emissions, and operability impacts. Based upon the cold flow characterization, emissions results, acoustic behavior observed during the tests and consideration of mechanical, reliability, and implementation issues, the tri-swirler configuration was selected as the best variable geometry concept for incorporation in the RQL combustor evolution efforts for the HSCT.

Tacina, Robert R.↗

Emission Spectroscopy and Radiometric Measurements in the NASA Ames IHF Arc Jet Facility

Plasma diagnostic measurement campaigns in the NASA Ames Interaction Heating Facility (IHF) have been conducted over the last several years with a view towards characterizing the flow in the arc jet facility by providing data necessary for modeling and simulation. Optical emission spectroscopy has been used in the plenum and in the free jet of the nozzle. Radiation incident over a probe surface has also been measured using radiometry. Plenum measurements have shown distinct radial profiles of temperature over a range of operating conditions. For cases where large amounts of cold air are added radially to the main arc-heated stream, the temperature profiles are higher by as much as 1500 K than the profiles assumed in flow simulations. Optical measurements perpendicular to the flow direction in the free jet showed significant contributions to the molecule emission through inverse pre-dissociation, thus allowing determination of atom number densities from molecular emission. This has been preliminarily demonstrated with the N2 1st Positive System. Despite the use of older rate coefficients, the resulting atom densities are reasonable and surprisingly close to flow predictions.

Winter, Michael W.↗