Search NASA⌕ Search

SEARCH · Search NASA

Results for “competition process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Oxidation rates and redox stabilization of ferrous iron in trioctahedral smectites

Iron(II)-bearing trioctahedral smectites (saponites) form during anoxic alteration of basaltic rock. They are predicted to have been widespread on the early Earth and are observed in the oceanic subsurface today. Smectite structures, including the occupancy of sites in the octahedral sheet, affect iron redox behavior but the rates and products of trioctahedral smectite oxidation have been largely unexplored to date. In this study we synthesized two Fe(II)-bearing trioctahedral smectites, one moderate (22 wt% Fe) and one high (27 wt% Fe) in iron content. We then examined the rate, extent, and products of their oxidation by dissolved oxygen, nitrite, and hydrogen peroxide. Dissolved oxygen caused partial oxidation of Fe(II) in the smectites with 14 to 43% of Fe(II) unoxidized after 20 to 30 days of exposure. The rate and extent of oxidation correlated with the dissolved oxygen concentration and the Fe(II) content of the clay. The incomplete oxidation in these experiments is consistent with the mixed-valent trioctahedral smectites observed in oxidized natural samples but contrasts with the complete reoxidation by oxygen shown by chemically- or microbially-reduced dioctahedral smectites. Oxidation of structural Fe(II) by 5 mmol L -1 nitrite was negligible for the moderate-iron smectite and yielded only ~17% oxidation after 54 days of reaction for the high-iron smectite. Hydrogen peroxide caused rapid and near-complete oxidation of both clays. Powder X-ray diffraction, variable-temperature Mössbauer spectroscopy, and extended X-ray absorption fine structure spectroscopy together detected no crystalline or short-range-ordered secondary phases and show that oxidized iron remained in the trioctahedral smectite structure. The recalcitrant Fe(II) pool in oxidized trioctahedral smectites exists in less distorted sites than Fe(II) in the initial clays. Its unreactive nature at prolonged reaction times indicates an elevated redox potential generated by the local coordination environment. Slower oxidation rates create a larger recalcitrant Fe(II) pool, suggesting kinetic competition between oxidation and a process involved in redox stabilization, such as electron exchange between octahedral iron sites or deprotonation of hydroxyl groups in the structure. The resistance to complete oxidation of trioctahedral ferrous smectites and their full retention of iron demonstrates that transitions from anoxic to oxic conditions generate mixed-valence smectites rather than a mixture of new phases. Identifying the diagenetic products of mixed-valent trioctahedral smectites may provide an indicator in the rock record of past redox cycling. In conclusion, substantial portions of structural Fe(II) in trioctahedral smectites display slow abiotic oxidation kinetics and represent potential electron donors for both microaerophilic iron oxidizing and nitrate-reducing, iron-oxidizing microorganisms in altered mafic rocks and related settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Micrometer-sized Magnetite Synthesis using Fe(OH)2(s) as a Precursor for Technetium Sequestration from Liquid Nuclear Waste Streams

Systematic batch experiments under variable adjusted physicochemical conditions were conducted to explore optimization of micrometer-sized magnetite synthesis for Tc sequestration from radionuclide waste streams using Fe(OH)2(s) as the precursor. Extensive solid characterization using x-ray diffraction and spectroscopic methods was performed to assess changes in particle morphology and size distribution, as well as Tc speciation and incorporation, in the produced mineral phases. The results show that the solution pH, temperature, and oxidation kinetics play key roles in the final mineral products. Micrometer-sized magnetite crystals (0.62-0.96 µm on average) with well-defined dodecahedral or octahedral structures were synthesized under near neutral (~pH 8) or alkaline (~pH13) conditions at 75 °C, respectively; whereas goethite dominated the end products at room temperature. An increase in pH at 75 °C improved Tc removal from 27% (near neutral pH) to 42% (alkaline pH), but the removal process remained inhibited by redox competitive Cr(VI) present in the waste streams. By adding additional Fe(II) to the system, Tc sequestration was dramatically improved to up to 87% without observable changes in the solid product. The sequestrated Tc existed as TcO2·2H2O and/or Tc(IV) incorporated into magnetite, where extended X-ray absorption fine structure (EXAFS) spectroscopy showed that more Tc was incorporated into magnetite at elevated temperatures and pH conditions, with complete Tc(IV) incorporation into magnetite occurring under 75 °C-pH 13 conditions. Our results indicate that optimal micrometer-sized magnetite can be produced for Tc sequestration by reacting Fe(OH)2(s) with a waste stream simulant under elevated pH (~13) and temperature (75 °C) conditions. The incorporation of reduced Tc(IV) into stable micrometer-sized magnetite provides a viable supplemental immobilizing technology that may be used to improve nuclear waste treatment and disposal needs.

Wang, Guohui↗
DOE OSTI2024

SEI Formation and Lithium-Ion Electrodeposition Dynamics in Lithium Metal Batteries via First-Principles Kinetic Monte Carlo Modeling

The stabilization and enhanced performance of lithium metal batteries (LMBs) depend on the formation and evolution of the Solid Electrolyte Interphase (SEI) layer as a critical component for regulating the Li metal electrodeposition processes. This study employs a first-principles kinetic Monte Carlo (kMC) model to simulate the SEI formation and Li + electrodeposition processes on a lithium metal anode, integrating both the electrochemical electrolyte reduction reactions and the diffusion events giving place to the SEI aggregation processes during battery charge and discharge processes. The model replicates the competitive interactions between organic and inorganic SEI components, emphasizing the influence of the cycling regime. Results indicate that grain boundaries within the SEI facilitate faster lithium-ion transport compared to crystalline regions, crucial for improving the performance and stability of LMBs. The findings underscore the importance of dynamic SEI modeling for further development of next-generation high-energy-density batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Solid-phase hetero epitaxial growth of α-phase formamidinium perovskite

Conventional epitaxy of semiconductor films requires a compatible single crystalline substrate and precisely controlled growth conditions, which limit the price competitiveness and versatility of the process. We demonstrate substrate-tolerant nano-heteroepitaxy (NHE) of high-quality formamidinium-lead-tri-iodide (FAPbI 3 ) perovskite films. The layered perovskite templates the solid-state phase conversion of FAPbI 3 from its hexagonal non-perovskite phase to the cubic perovskite polymorph, where the growth kinetics are controlled by a synergistic effect between strain and entropy. The slow heteroepitaxial crystal growth enlarged the perovskite crystals by 10-fold with a reduced defect density and strong preferred orientation. This NHE is readily applicable to various substrates used for devices. The proof-of-concept solar cell and light-emitting diode devices based on the NHE-FAPbI 3 showed efficiencies and stabilities superior to those of devices fabricated without NHE.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanorod length-dependent photodriven H2 production in 1D CdS–Pt heterostructures

Colloidal quantum confined semiconductor-metal heterostructures are promising candidates for solar energy conversion because their light absorbing semiconductor and catalytic components can be independently tuned and optimized. Although the light-to-hydrogen efficiencies of such systems have shown interesting dependences on the morphologies of the semiconductor and metal domains, the mechanisms of such dependences are poorly understood. Here, we use Pt tipped 0D CdS quantum dots (with ∼4.6 nm diameter) and 1D CdS nanorods (of ∼13.8, 27.8, 66.6, and 88.9 nm average rod lengths) as a model system to study the distance-dependence of charge separation and charge recombination times and their impacts on photo-driven H2 production. The H2 generation quantum efficiency increases from 0.2% ± 0.0% in quantum dots to 28.9% ± 0.4% at a rod length of 28 nm and shows negligible changes at longer rod lengths. The half-life time of electron transfer from CdS to Pt increases monotonically with rod length, from 0.7 ± 0.1 in quantum dots to 170.2 ± 29.5 ps in the longest rods, corresponding to a slight decrease in electron transfer quantum efficiency from 92% to 81%. The amplitude-weighted average lifetime of charge recombination of the electron in Pt with the hole in CdS increases from 4.7 ± 0.4 µs in quantum dots to 149 ± 34 µs in 28 nm nanorods, and the lifetime does not increase further in longer rods, resembling the trend in the observed H2 generation quantum efficiency. Our result suggests that the competition of the charge recombination process with the hole removal by the sacrificial electron donor plays a dominant role in the observed nanorod length dependent overall light driven H2 generation quantum efficiency.

Chemistry↗
NASA NTRS1982

Modeling of polymer photodegradation for solar cell modules

It was shown that many of the experimental observations in the photooxidation of hydrocarbon polymers can be accounted for with a computer simulation using an elementary mechanistic model with corresponding rate constants for each reaction. For outdoor applications, however, such as in photovoltaics, the variation of temperature must have important effects on the useful lifetimes of such materials. The data bank necessary to replace the isothermal rate constant values with Arrhenius activation parameters: A (the pre-exponential factor) and E (the activation energy) was searched. The best collection of data assembled to data is summarized. Note, however, that the problem is now considerably enlarged since from a theoretical point of view, with 51 of the input variables replaced with 102 parameters. The sensitivity of the overall scheme is such that even after many computer simulations, a successful photooxidation simulation with the expanded variable set was not completed. Many of the species in the complex process undergo a number of competitive pathways, the relative importance of each being often sensitive to small changes in the calculated rate constant values.

Somersall, A. C.↗
NASA NTRS1985

On the connection between the 3HE-enrichment and spectral index of solar energetic particles

A model is presented which explains the observed tendency of events with large 3He/4He ratios to have steeper spectra. In this model preferential injection of 3He, acceleration by Alfven waves and Coulomb deceleration of ions are considered simultaneously. The observed tendency may be obtained as a result of competition between injection and acceleration processes.

Kocharov, L. G.↗
NASA NTRS2002

ISO 9000 and/or Systems Engineering Capability Maturity Model?

For businesses and organizations to remain competitive today they must have processes and systems in place that will allow them to first identify customer needs and then develop products/processes that will meet or exceed the customers needs and expectations. Customer needs, once identified, are normally stated as requirements. Designers can then develop products/processes that will meet these requirements. Several functions, such as quality management and systems engineering management are used to assist product development teams in the development process. Both functions exist in all organizations and both have a similar objective, which is to ensure that developed processes will meet customer requirements. Are efforts in these organizations being duplicated? Are both functions needed by organizations? What are the similarities and differences between the functions listed above? ISO 9000 is an international standard of goods and services. It sets broad requirements for the assurance of quality and for management's involvement. It requires organizations to document the processes and to follow these documented processes. ISO 9000 gives customers assurance that the suppliers have control of the process for product development. Systems engineering can broadly be defined as a discipline that seeks to ensure that all requirements for a system are satisfied throughout the life of the system by preserving their interrelationship. The key activities of systems engineering include requirements analysis, functional analysis/allocation, design synthesis and verification, and system analysis and control. The systems engineering process, when followed properly, will lead to higher quality products, lower cost products, and shorter development cycles. The System Engineering Capability Maturity Model (SE-CMM) will allow companies to measure their system engineering capability and continuously improve those capabilities. ISO 9000 and SE-CMM seem to have a similar objective, which is to document the organization's processes and certify to potential customers the capability of a supplier to control the processes that determine the quality of the product or services being produced. The remaining sections of this report examine the differences and similarities between ISO 9000 and SE-CMM and make recommendations for implementation.

Sampson E. Gholston↗
NASA NTRS2013

Exploration Laboratory Analysis FY13

The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk, which is stated as the Risk of Inability to Adequately Treat an Ill or Injured Crew Member, and ExMC Gap 4.05: Lack of minimally invasive in-flight laboratory capabilities with limited consumables required for diagnosing identified Exploration Medical Conditions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability in future exploration missions. Mission architecture poses constraints on equipment and procedures that will be available to treat evidence-based medical conditions according to the Space Medicine Exploration Medical Conditions List (SMEMCL), and to perform human research studies on the International Space Station (ISS) that are supported by the Human Health and Countermeasures (HHC) element. Since there are significant similarities in the research and medical operational requirements, ELA hardware development has emerged as a joint effort between ExMC and HHC. In 2012, four significant accomplishments were achieved towards the development of exploration laboratory analysis for medical diagnostics. These achievements included (i) the development of high priority analytes for research and medical operations, (ii) the development of Level 1 functional requirements and concept of operations documentation, (iii) the selection and head-to-head competition of in-flight laboratory analysis instrumentation, and (iv) the phase one completion of the Small Business Innovation Research (SBIR) projects under the topic Smart Phone Driven Blood-Based Diagnostics. To utilize resources efficiently, the associated documentation and advanced technologies were integrated into a single ELA plan that encompasses ExMC and HHC development efforts. The requirements and high priority analytes was used in the selection of the four in-flight laboratory analysis performers. Based upon the competition results, a down select process will be performed in the upcoming year. Looking ahead, this unified effort has positioned each element for an in-flight lab analysis demonstration of select diagnostics measurements in the 2015 timeframe.

Krihak, Michael↗
NASA NTRSDate not supplied

The Nasa Facility for Astromaterials Research at the Johnson Space Center – A National Laboratory for Planetary Research.

The Astromaterials Research and Exploration Science (ARES) Division at the NASA Johnson Space Center has established the NASA Facility for Astromaterials Research (NFAR) through the NASA Planetary Science Enabling Facilities program. NFAR is designed to provide access to our unique combination of laboratories, instruments, infrastructure, and technical expertise for conducting broad-based world-class planetary research. NFAR enables direct access to both research and curation expertise, to facilitate specialized sample handling and analysis of astromaterials and planetary analog materials. NFAR users from institutions that historically have limited access to or lack in-house analytical or experimental facilities are particularly encouraged to apply. We issue three calls for user proposals each year due the last day of April, July, and November. We award NFAR research projects to users in a competitive peer-reviewed proposal process. NASA-funded research in active PSD R&A proposals is prioritized along with requests from early-career/next-generation scientists, under-represented minorities, and those PIs from minority serving institutions. There is no cost to use the analytical facility, but researchers are required to be in person for analyses. Proposals to use NFAR labs are limited to < 5 pages and focus on the scientific purpose of the investigation and its relevance to NASA PSD, the labs to be accessed, and the time needed for the investigation. More information can be found at: https://ares.jsc.nasa.gov/research/nasa-facility-astromaterials-research/.

J. Filiberto↗
NASA NTRSDate not supplied

The NASA Facility for Astromaterials Research at the Johnson Space Center – A National Laboratory for Planetary Research

The Astromaterials Research and Exploration Science (ARES) Division at the NASA Johnson Space Center has established the NASA Facility for Astromaterials Research (NFAR) through the NASA Planetary Science Enabling Facilities program. NFAR is designed to provide access to our unique combination of laboratories, instruments, infrastructure, and technical expertise for conducting broad-based world-class planetary research. NFAR enables direct access to both research and curation expertise, to facilitate specialized sample handling and analysis of astromaterials and planetary analog materials. NFAR users from institutions that historically have limited access to or lack in-house analytical or experimental facilities are particularly encouraged to apply. We award NFAR research projects to users in a competitive peer-reviewed proposal process. Proposals to use NFAR labs are limited to <5 pages and focus on the scientific purpose of the investigation and its relevance to NASA Planetary Science Division (PSD) objectives, the labs to be accessed, and the time needed for the investigation. There is no deadline for proposals, and proposals will be reviewed on a rolling basis. NASA-funded research in active PSD R&A proposals is prioritized along with requests from early-career/next-generation scientists, under-represented minorities, and to Principal Investigators from minority-serving institutions. More information on the NFAR labs and preparing and submitting a proposal can be found at: https://ares.jsc.nasa.gov/research/nasa-facility-astromaterials-research/.

E. Rampe↗
DOE OSTI2020

Use of the Tool to Support Renewable Energy Auctions Processes (RE Data Explorer)

Renewable energy auctions are now a common competitive approach to procure low-cost renewable power around the world. Ensuring a successful auction process increasingly depends on the capabilities of auction designers and participants to identify actionable and defensible insights from large data sets (on renewable energy resources and complementary data) to both attract potential investors and address stakeholder concerns. The Renewable Energy (RE) Data Explorer is a user-friendly geospatial analysis tool for analyzing renewable energy potential and informing decisions. Developed by the National Renewable Energy Laboratory (NREL) and supported by the U.S. Agency for International Development (USAID), RE Data Explorer performs visualization and analysis of renewable energy potential that can be customized for different scenarios. RE Data Explorer can support prospecting, integrated planning, policymaking, and other decision-making activities to accelerate renewable energy deployment. The broader RE Explorer website provides guidance and information to link the RE Data Explorer geospatial analysis tool to key decision areas. This document provides information on how the RE Data Explorer can be used to support renewable energy auction processes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Peeling back the many layers of competitive exclusion

Baby chicks administered a fecal transplant from adult chickens are resistant to Salmonella colonization by competitive exclusion. A two-pronged approach was used to investigate the mechanism of this process. First, Salmonella response to an exclusive (Salmonella competitive exclusion product, Aviguard ® ) or permissive microbial community (chicken cecal contents from colonized birds containing 7.85 Log 10 Salmonella genomes/gram) was assessed ex vivo using a S. typhimurium reporter strain with fluorescent YFP and CFP gene fusions to rrn and hilA operon, respectively. Second, cecal transcriptome analysis was used to assess the cecal communities’ response to Salmonella in chickens with low (≤5.85 Log 10 genomes/g) or high (≥6.00 Log 10 genomes/g) Salmonella colonization. The ex vivo experiment revealed a reduction in Salmonella growth and hilA expression following co-culture with the exclusive community. The exclusive community also repressed Salmonella’s SPI-1 virulence genes and LPS modification, while the anti-virulence/inflammatory gene avrA was upregulated. Salmonella transcriptome analysis revealed significant metabolic disparities in Salmonella grown with the two different communities. Propanediol utilization and vitamin B12 synthesis were central to Salmonella metabolism co-cultured with either community, and mutations in propanediol and vitamin B12 metabolism altered Salmonella growth in the exclusive community. There were significant differences in the cecal community’s stress response to Salmonella colonization. Cecal community transcripts indicated that antimicrobials were central to the type of stress response detected in the low Salmonella abundance community, suggesting antagonism involved in Salmonella exclusion. This study indicates complex community interactions that modulate Salmonella metabolism and pathogenic behavior and reduce growth through antagonism may be key to exclusion.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1973

The theory of charged particle temperatures in the upper atmosphere.

The thermal structure of the earth's upper atmosphere is examined in detail, with emphasis on the physical processes that govern the behavior of charged-particle temperatures. The characteristic features of and competition between the heating, cooling, and thermal conduction processes that govern electron and ion temperatures in the mid-latitude and auroral ionospheric regions are theoretically analyzed, and appropriate comparisons are made with experimental data. The proposed elaborate theory is considered qualitatively successful in accounting for the thermal structure of the ionosphere, and points requiring quantitative verification are delineated.

Schunk, R. W.↗
DOE OSTI2020

Economic Perspectives of Biogas Production via Anaerobic Digestion

As the demand for utilizing environment-friendly and sustainable energy sources is increasing, the adoption of waste-to-energy technologies has started gaining attention. Producing biogas via anaerobic digestion (AD) is promising and well-established; however, this process in many circumstances is unable to be cost competitive with natural gas. In this research, we provide a technical assessment of current process challenges and compare the cost of biogas production via the AD process from the literature, Aspen Plus process modeling, and CapdetWorks software. We also provide insights on critical factors affecting the AD process and recommendations on optimizing the process. We utilize four types of wet wastes, including wastewater sludge, food waste, swine manure, and fat, oil, and grease, to provide a quantitative assessment of theoretical energy yields of biogas production and its economic potential at different plant scales. Our results show that the cost of biogas production from process and economic models are in line with the literature with a potential to go even lower for small-scale plants with technological advancements. This research illuminates potential cost savings for biogas production using different wastes and guide investors to make informed decisions, while achieving waste management goals.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1972

Computer enhancement through interpretive techniques

The improvement in the usage of the digital computer through the use of the technique of interpretation rather than the compilation of higher ordered languages was investigated by studying the efficiency of coding and execution of programs written in FORTRAN, ALGOL, PL/I and COBOL. FORTRAN was selected as the high level language for examining programs which were compiled, and A Programming Language (APL) was chosen for the interpretive language. It is concluded that APL is competitive, not because it and the algorithms being executed are well written, but rather because the batch processing is less efficient than has been admitted. There is not a broad base of experience founded on trying different implementation strategies which have been targeted at open competition with traditional processing methods.

Foster, G.↗
NASA NTRS1990

Situational awareness in the commercial aircraft cockpit - A cognitive perspective

A cognitive theory is presented that has relevance for the definition and assessment of situational awareness in the cockpit. The theory asserts that maintenance of situation awareness is a constructive process that demands mental resources in competition with ongoing task performance. Implications of this perspective for assessing and improving situational awareness are discussed. It is concluded that the goal of inserting advanced technology into any system is that it results in an increase in the effectiveness, timeliness, and safety with which the system's activities can be accomplished. The inherent difficulties of the multitask situation are very often compounded by the introduction of automation. To maximize situational awareness, the dynamics and capabilities of such technologies must be designed with thorough respect for the dynamics and capabilities of human information-processing.

Adams, Marilyn J.↗
DOE OSTI2024

Pronounced reduction in the regeneration energy of potassium sarcosinate CO 2 capture solvent using TiO 2

Absorption-based CO 2 capture technologies face economic feasibility concerns due to the exceedingly high energy requirements of solvent regeneration. Among various proposed solutions, solid acid-aided solvent regeneration stands out as a promising approach. Studies have shown that solid materials containing Lewis and Brønsted acid sites can facilitate deprotonation of protonated amine and breakdown of carbamate molecules, which significantly increases CO 2 desorption rate and decreases regeneration energy of common solvents such as MEA and DEA. However, the influence of solid acids on alternate solvents such as amino acids is not well known. Here, we report the performance of TiO 2 for the regeneration of CO 2 -loaded aqueous potassium sarcosinate (K-Sar) solvent. K-Sar is an environmentally friendly amino-acid salt that provides high CO 2 absorption rates, making it a good candidate for both point-source and direct-air capture. TiO 2 is hydrothermally stable and contains high surface acid site concentration. Desorption of CO 2 from K-Sar starts at room temperature in the presence of TiO 2 , while such onset temperature is greater than 70°C for regeneration without TiO 2 . Further, at a temperature of 95°C, the maximum CO 2 desorption rate and cumulative CO 2 removal increase by 128% and 91%, respectively, in the presence of TiO 2 compared to the no TiO 2 case. The total regeneration energy could be reduced by ~ 50% with TiO 2 , showcasing the significant role this process can take in improving the commercial competitiveness of absorption-based CO 2 capture. Further characterization with XRD, SEM, and NMR concluded that neither the TiO 2 powder nor the solvent undergoes any physical or chemical degradation in the regeneration process, suggesting the potential of their long-term usability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗