Search NASA⌕ Search

SEARCH · Search NASA

Results for “compounding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Plastic shrinkage of mortars cured with a paraffin-based compound – Bimodal neutron/X-ray tomography study

Early-age drying (immediately after casting) of mortars and the corresponding plastic shrinkage were studied using bimodal neutron/X-ray computed tomography. This novel, correlative 3D imaging mode enabled studying simultaneously and without any source of spurious perturbation the water migration and loss processes together with the corresponding deformations due to plastic shrinkage. Bimodal imaging opens up new possibilities for studying dynamic processes of coupled water transport and deformations in porous solids. The measurements were carried out on model systems (cylindrical mortar specimens with height of 19 mm). The study focused on the effect of a paraffin-based curing compound. Our results confirm that when the curing compound was applied directly onto the drying surface in a sufficient amount, both the evaporation rate and the rate of vertical displacement (settlement) were substantially reduced. The results shed a new light on the mechanisms of plastic shrinkage and the action of curing compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of silver($\mathrm{I}$) ion reduction on the selectivity of olefins, paraffins, and aromatic compounds by gas chromatographic stationary phases consisting of silver($\mathrm{I}$) salts in ionic liquids

We report the olefin/paraffin selectivity offered by ionic liquid (IL) stationary phases can be enhanced through the addition of silver(I) ion, which is well-known to undergo selective complexation with unsaturated compounds. However, such stationary phases often suffer from the loss of chromatographic selectivity as silver(I) ion can be reduced to elemental silver. To maintain the separation performance of silver(I) ion/IL stationary phases, an understanding of factors and conditions that promote the reduction of silver(I) ion is needed. In this study, capillary gas chromatography columns featuring a stationary phase consisting of the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C 10 MIM + ][NTf 2 - ]) IL impregnated with [Ag + ][NTf 2 - ] were examined to investigate the effects of temperature, hydrogen content in exposure gas stream, and time of heating/exposure events on olefin selectivity. Retention factors of representative analytes, such as C 6 olefins and paraffins as well as aromatic compounds, were measured after subjecting the columns to the aforementioned conditions, followed by an evaluation of selectivity factors over time. Selectivity factors of olefins and aromatic compounds were observed to decrease significantly when the stationary phases were heated to temperatures higher than 110°C as well as being subjected to mixed gas streams containing greater than 50 mol% of hydrogen. As constant column heating temperatures were applied under exposure gas mixtures containing hydrogen and nitrogen, a gradual decrease in analyte selectivity factors was observed under prolonged periods of time. However, application of a ternary gas mixture comprised of 25/50/25 mol% hydrogen/nitrogen/methane resulted in an increase in the 3-hexyne/cis-2-hexene selectivity when measured at 120°C for 60 h, due to a smaller decrease in the retention factor of 3-hexyne compared to cis-2-hexene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recovery of value-added compounds through fast pyrolysis of apple pomace hydrochar

The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC’s subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175°C, 200°C, and 250°C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO 2 emissions. In conclusion, the combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.

09 BIOMASS FUELS↗
DOE OSTI2020

Tunable structural and magnetic properties of NiAs-type Mn x Sb (1.00≤x≤1.30) compounds

Mn-based alloys can exhibit a variety of magnetic properties related to their tunable exchange interactions. Here, structural and magnetic properties of hexagonal NiAs-type Mn x Sb (1.00≤x≤1.30) compounds are studied with a combination of X-ray diffraction, neutron diffraction, and magnetic measurements. It is found that the magnetization, Curie temperature, and magnetocrystalline anisotropy of Mn x Sb compounds can be tuned by controlling Mn concentration and doping at interstitial (2d) sites. With increasing Mn concentration, magnetic moments of Mn atoms decrease and deviate gradually from the ab-plane to the c-axis for 1.20≤x≤1.22 at room temperature, which leads to a decrease of the Curie temperature T c and the spin reorientation temperature T SR . By doping with nonmagnetic elements, a substantial room-temperature magnetocaloric effect without magnetic hysteresis was achieved for Mn 1.12 Zr 0.1 Sb compound, which is highly beneficial to the practical magnetic refrigeration application.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic structure of triangular lattice compound Tb2Ni0.90Si2.94

AlB 2 -type ternary intermetallic compound Tb 2 Ni 0.90 Si 2.94 (space group P 6=mmm, hP 3, No. 191) was reported to exhibit spin freezing behaviour of the ferromagnetic clusters present in the system below T f = 9:9 K, along with the presence of spatially limited antiferromagnetic phase. In this work, on the basis of variable temperature zero-field neutron diffraction measurements, we have shown that the antiferromagnetic phase transition occurs for the compound below T N ~13 K. Neutron diffraction study indicates ab-plane non-collinear sine-modulated antiferromagnetic ordering of the system with wave vectors of k 1 = [±1/6, ±1/6, 0] and k 2 = [±1/3, ±1/3, 0] down to 1.7 K. The weak and diffuse nature of the magnetic Bragg peaks along with limited coherence length further confirm the short-range nature of the antiferromagnetic phase in this compound.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and structural characterization of 2,2’-bipyridine zinc formate: Analysis of formate bonding and hydrosilylation of CO 2 and carbonyl compounds

The zinc formate compound (bipy)Zn(O 2 CH) 2 is obtained via the reaction of Zn(O 2 CH) 2 with 2,2’-bipyridine (bipy). In addition, (bipy)Zn(O 2 CH) 2 may be formed from zinc hydride via addition of bipy followed by addition of (i) HCO 2 H and (ii) CO 2 . The molecular structure of (bipy)Zn(O 2 CH) 2 has been determined by X-ray diffraction, thereby demonstrating that it exists as a monomeric species with a distorted tetrahedral zinc center and monodentate formate ligands. Analysis of the bonding within the formate ligand indicates that the zinc–formate moiety is not best represented by a Zn–O–C(=O)H resonance structure, but instead possesses a significant ionic component that reduces the C=O bond order and increases the C–O bond order. The formate compound (bipy)Zn(O 2 CH) 2 participates in hydrosilylation transformations involving CO 2 and carbonyl compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydrogen bond network and bond valence analysis on uranyl sulfate compounds with organic-based interstitial cations

Seven new uranyl sulfate compounds with organic charge-balancing cations have been synthesized and structurally characterized. The structural unit topologies of the two chains and five sheets have been previously reported in uranyl sulfate crystal chemistry, although they were synthesized using different organic molecules. With the inclusion of six of these structures to the 48 previously published uranyl sulfate compounds, a total of 54 known uranyl sulfate compounds with organic charge-balancing cations were compiled and analyzed. A graphical approach was used to compare the structural unit topologies, and a bond valence approach was used to quantify the hydrogen bond networks that exist between the interstitial cationic and solvent species to the uranyl sulfate anionic structural units. Finally, this analysis helped elucidate which oxygen atoms in the structural unit receive hydrogen bonds and how the organic cations stabilize the overall crystal structures in this subclass of U(VI) materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of structural effects of aromatic compounds on sooting tendency with mechanistic insight into ethylphenol isomers

Small aromatic molecules with oxygen-containing functional groups are a promising class of fuel additives, as they can be readily sourced from depolymerized lignin. These oxygenated aromatic compounds (OACs) show a lower sooting tendency than aromatic hydrocarbons, but OACs having alkyl groups such as ethylphenol show a higher sooting tendency than other OACs such as phenol and anisole, despite the oxygen moiety. In this study, we investigate the relationship between chemical structure and soot precursor formation to explain observed differences in the sooting tendency of OACs and to gain insight into how alkyl or oxygenated substituents on the aromatic ring affect soot precursor formation. The weakest bond for 15 aromatic compounds was identified and cleavage of these bonds was shown to generate either benzyl or phenoxy radicals. A linear relationship between standard enthalpy of formation (ΔH f o ) of these radicals and the yield sooting index (YSI) was found, and thus ΔH f ° can be applied as a metric to estimate YSIs of various aromatic compounds; higher ΔH f o of a radical indicates an increase in the radical reactivity and leads to more soot precursor formation. Flow reactor experiments were performed for 2-ethylphenol and 3-ethylphenol to elucidate how ortho and meta substitution effects the sooting tendency. Soot precursors were identified from the experiment and their formation pathways were investigated computationally. 2-ethylphenol produces more oxygenated products than 3-ethylphenol since the ortho position has increased resonance stabilization of radical intermediates, which leads to lower YSI. Overall, these results further inform the selection of potential biomass-derived fuel blendstocks that have favorable sooting tendencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Organic compounds alter the preference and rates of heavy metal adsorption on ferrihydrite

The availability of heavy metals in terrestrial environments is largely controlled by their interactions with minerals and organic matter, with iron minerals having a particularly strong role in heavy metal fate. Because soil organic matter contains a variety of compounds that differ in their chemical properties, the underlying impact organic matter-soil mineral associations bestow on heavy metal binding is still unresolved. Here, we systematically examine the binding of Cd, Zn and Ni by a suite of organic-ferrihydrite assemblages, chosen to account for various compound chemistries within soil organic matter. We posited that organic compound functionality would dictate the extent of association with the organic-ferrihydrite assemblages. Increased heavy metal binding to the assemblages was observed and attributed to the introduction of additional binding sites by the organic functional groups with differing metal affinities. Furthermore, the relative increase depended on the metal's Lewis acidity and followed the order Cd > Zn > Ni, whereas the reverse order was obtained for metal binding by pristine ferrihydrite (Ni > Zn > Cd). Citric acid-, aspartic acid- and cysteine-ferrihydrite assemblages also enhanced the metal binding rate. X-ray absorption spectroscopy revealed that the organic coating contributed significantly to Zn binding by the assemblages, despite relatively low organic surface coverage. Our findings provide valuable information on the nature of heavy metal-organic-mineral interactions and metal adsorption processes regulating their bioavailability and transport.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Oxidation in Ca/K-1144 iron-based superconductors polycrystalline compounds

Iron-based superconductors (IBSCs) are a class of material under investigation for the development of superconducting wires in the low-temperature-high magnetic fields power application. Among the various families of IBSCs, the 1144 CaKFe$_4$As$_4$ compound is a promising material able to achieve outstanding superconducting properties with a cheap and simple chemical composition. Oxidation, in these compounds, is considered an obstacle for high intergranular critical current density, J c,GB . A study devoted to the evaluation of oxidation phenomena and their effects on the superconducting properties is thus needed in order to fully understand the involved mechanisms. From the evaluation of polycrystalline samples obtained by a mechanochemically assisted synthesis route, a degradation of the critical temperature and critical currents has been observed concurrently with oxygen accumulation at grain boundaries in open porosities. However, the crystalline structure at an atomic level seems not affected, as well as intragranular superconducting properties assessed by means of calorimetric methods. These results suggest that loss of superconducting properties in Ca/K-1144 compounds following oxidation is significantly associated with the worsening of grain connectivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

RB-TnSeq identifies genetic targets for improved tolerance of Pseudomonas putida towards compounds relevant to lignin conversion

We report lignin-derived mixtures intended for bioconversion commonly contain high concentrations of aromatic acids, aliphatic acids, and salts. The inherent toxicity of these chemicals places a significant bottleneck upon the effective use of microbial systems for the valorization of these mixtures. Pseudomonas putida KT2440 can tolerate stressful quantities of several lignin-related compounds, making this bacterium a promising host for converting these chemicals to valuable bioproducts. Nonetheless, further increasing P. putida tolerance to chemicals in lignin-rich substrates has the potential to improve bioprocess performance. Accordingly, we employed random barcoded transposon insertion sequencing (RB-TnSeq) to reveal genetic determinants in P. putida KT2440 that influence stress outcomes during exposure to representative constituents found in lignin-rich process streams. The fitness information obtained from the RB-TnSeq experiments informed engineering of strains via deletion or constitutive expression of several genes. Namely, ΔgacAS, ΔfleQ, ΔlapAB, ΔttgR::P tac :ttgABC, Ptac:PP_1150:PP_1152, ..delta..relA, and ΔPP_1430 mutants showed growth improvement in the presence of single compounds, and some also exhibited greater tolerance when grown using a complex chemical mixture representative of a lignin-rich chemical stream. Overall, this work demonstrates the successful implementation of a genome-scale screening tool for the identification of genes influencing stress tolerance against notable compounds within lignin-enriched chemical streams, and the genetic targets identified herein offer promising engineering targets for improving feedstock tolerance in lignin valorization strains of P. putida KT2440.

09 BIOMASS FUELS↗
DOE OSTI2021

Local Distortions and Metal–Semiconductor–Metal Transition in Quasi-One-Dimensional Nanowire Compounds AV 3 Q 3 O δ (A = K, Rb, Cs and Q = Se, Te)

Metal cluster compounds have garnered renewed interest in the search for novel superconductors and topological semimetals owing to structural instabilities of metal-cluster geometries and broken symmetries. Here we synthesized needle-like crystals of the V-cluster-based quasi-one-dimensional (Q1D) materials AV 3 Q 3 O δ (A = K, Rb, Cs, Q= Se, Te) which can also be viewed as being composed of parallel nanowires. We examine how changes in their average and local structure control their electronic properties. All compounds crystallize in the TIFe 3 Te 3 -type structure (P6 3 /m space group) with infinite (V 3 )Q 3 ) - double-walled columnar chains separated by A + cations. Our single-crystal and synchrotron powder diffraction studies indicate oxygen atoms partially occupy the center site of the V 6 octahedral metal cluster cages in KV 3 Te 3 O 0.33 , RbV 3 Te 3 O 0.32 , and CsV 3 Te 3 O 0.35 , whereas KV 3 Se 3 is structurally oxygen-free. Our synchrotron X-ray pair distribution function (PDF) analyses indicate that the oxygen-free V 6 cluster octahedra in KV 3 Se 3 are highly distorted perpendicular to the chain direction even at room temperature, reducing the symmetry of the average structure from hexagonal P6 3 /m to monoclinic P2 1 /m. Our theoretical calculation supports this P2 1 /m distortion and suggests the structure further distorts to P2 1 or P2 1 /c at lower temperatures. In contrast, the oxygen-centered V-cluster in KV 3 Te 3 O 0.33 exhibits a V-3-triangle-trimerization along the chain direction. This feature is discernible from the local PDF and is consistent with lattice dynamical calculations based on density functional theory. Resistivity measurements indicate that KV 3 Se 3 exhibits metallic behavior, whereas a dramatic metal-semiconductor-metal transition emerges in KV 3 Te 3 O 6.33 , RbV 3 Te 3 O 0.32 , and CsV 3 Te 3 O 0.35 because of oxygen disorder and changes in local structure captured from our electronic structure analyses of the Fermi surface. Our investigation of the AV 3 Q 3 O 6 family demonstrates the importance of understanding local changes in structure driven by electronic instabilities, which can guide the search for new quantum materials in other low-dimensional cluster-compound materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effects of Halides on Organic Compound Degradation during Plasma Treatment of Brines

Plasma has been proposed as an alternative strategy to treat organic contaminants in brines. Chemical degradation in these systems is expected to be partially driven by halogen oxidants, which have been detected in halide-containing solutions exposed to plasma. In this study, we characterized specific mechanisms involving the formation and reactions of halogen oxidants during plasma treatment. Here, we first demonstrated that addition of halides accelerated the degradation of a probe compound known to react quickly with halogen oxidants (i.e., para -hydroxybenzoate) but did not affect the degradation of a less reactive probe compound (i.e., benzoate). This effect was attributed to the degradation of para-hydroxybenzoate by hypohalous acids, which were produced via a mechanism involving halogen radicals as intermediates. We applied this mechanistic insight to investigate the impact of constituents in brines on reactions driven by halogen oxidants during plasma treatment. Bromide, which is expected to occur alongside chloride in brines, was required to enable halogen oxidant formation, consistent with the generation of halogen radicals from the oxidation of halides by hydroxyl radical. Other constituents typically present in brines (i.e., carbonates, organic matter) slowed the degradation of organic compounds, consistent with their ability to scavenge species involved during plasma treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural Insights into the Vapochromic Behavior of Pt- and Pd-Based Compounds

Anionic complexes having vapochromic behavior are investigated: [K(H 2 O)][M(ppy)(CN) 2 ], [K(H 2 O)][M(bzq)(CN) 2 ], and [Li(H 2 O) n ][Pt(bzq)(CN) 2 ], where ppy = 2-phenylpyridinate, bzq = 7,8-benzoquinolate, and M = Pt(II) or Pd(II). These hydrated potassium/lithium salts exhibit a change in color upon being heated to 380 K, and they transform back into the original color upon absorption of water molecules from the environment. The challenging characterization of their structure in the vapochromic transition has been carried out by combining several experimental techniques, despite the availability of partially ordered and/or impure crystalline material. Room-temperature single-crystal and powder X-ray diffraction investigation revealed that [K(H 2 O)][Pt(ppy)(CN) 2 ] crystallizes in the Pbca space group and is isostructural to [K(H 2 O)][Pd(ppy)(CN) 2 ]. Variable-temperature powder X-ray diffraction allowed the color transition to be related to changes in the diffraction pattern and the decrease in sample crystallinity. Water loss, monitored by thermogravimetric analysis, occurs in two stages, well separated for potassium Pt compounds and strongly overlapped for potassium Pd compounds. Furthermore, the local structure of potassium compounds was monitored by in situ pair distribution function (PDF) measurements, which highlighted changes in the intermolecular distances due to a rearrangement of the crystal packing upon vapochromic transition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine Learning-Guided Discovery of Ternary Compounds Containing La, P, and Group 14 Elements

In this work, we integrate a deep machine learning (ML) method with first-principles calculations to efficiently search for the energetically favorable ternary compounds. Using La–Si–P as a prototype system, we demonstrate that ML-guided first-principles calculations can efficiently explore crystal structures and their relative energetic stabilities, thus greatly accelerate the pace of material discovery. A number of new La–Si–P ternary compounds with formation energies less than 30 meV/atom above the known ternary convex hull are discovered. Among them, the formation energies of La 5 SiP 3 and La 2 SiP phases are only 2 and 10 meV/atom, respectively, above the convex hull. These two compounds are dynamically stable with no imaginary phonon modes. Moreover, by replacing Si with heavier-group 14 elements in the eight lowest-energy La–Si–P structures from our ML-guided predictions, a number of low-energy La–X–P phases (X = Ge, Sn, Pb) are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stoichiometric Lanthanide Compounds with Diglycolamides: A Synthetic Approach toward Understanding Rare-Earth Speciation in Solution

A fundamental understanding of coordination chemistry across the lanthanide series is essential for explaining the chemical behavior of rare-earth metals in complex liquid–liquid extraction processes. Probing the exact bonding between the extractant and the metal is sometimes done through the synthesis of solid-state compounds that can serve as models for metal speciation in solution. In the case of diglycolamide (DGA), a commonly used neutral diamide extractant, extensive studies identify the stepwise formation of 1:1 [Ln(DGA)(H 2 O) 6 ] 3+ , 1:2 [Ln(DGA) 2 (H 2 O) 3 ] 3+ , and 1:3 [Ln(DGA) 3 ] 3+ complexes in solution. The crystallographic reports, however, exclusively show a 1:3 [Ln(DGA) 3 ] 3+ moiety in the solid state, while the structures of 1:1 and 1:2 complexes are yet to be isolated and comprehensively studied. In this work, we report the synthesis and characterization of three new families of stoichiometric N,N,N′,N’ -tetramethyldiglycolamide (TMDGA) compounds: [Ln(TMDGA)(H 2 O) 5 Cl]Cl 2 ·2H 2 O, [Ln(TMDGA) 2 (H 2 O) 3 ]Cl 3 ·3H 2 O, and [Ln(TMDGA) 3 ]Cl 3 ·7H 2 O, where Ln = Nd, Eu, Gd, with Ln:TMDGA ratios of 1:1, 1:2, and 1:3, respectively. Further, the compounds have been analyzed using vibrational spectroscopy (both Raman and FT-IR), as well as variable temperature fluorescence spectroscopy. A spectrophotometric titration of Eu(III) was performed to confirm the presence of the [Eu(TMDGA) n ] 3+ ( n = 1, 2, and 3) species in solution and to compare the individual solid-state emission spectra to their respective analogues in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystalline Organic Compounds as Effective Nuclei in Contact Efflorescence of Ammonium Sulfate

Contact nucleation is believed to play a role in liquid-to-solid phase transitions in the atmosphere including ice nucleation and salt efflorescence. Here, for this work, contact efflorescence of optically levitated ammonium sulfate droplets by collisions with organic particles is probed using a long working-distance optical trap. Two highly viscous water-soluble organic compounds (d-(+)-raffinose and citric acid), and two insoluble highly surface-active organic compounds (stearic acid and cis-pinonic acid) were probed for their ability to induce efflorescence upon contact. While three of the organics showed minimal effectiveness as contact nuclei, cis-pinonic acid showed a remarkable ability to initiate contact efflorescence of ammonium sulfate, occurring near ammonium sulfate’s deliquescence relative humidity. Further analysis of cis-pinonic acid using bright-field microscopy in an electrodynamic balance provided evidence that the cis-pinonic acid particles are crystalline under the laboratory conditions. We suggest that the close lattice match between crystalline ammonium sulfate and crystalline cis-pinonic acid may account for the observed effectiveness in initiating contact efflorescence of ammonium sulfate. In contrast, tests of contact nucleation between cis-pinonic acid and sodium chloride, a pair with a poor lattice match, did not result in efflorescence. These findings suggest that crystalline organic compounds in the atmosphere could act as effective nuclei for contact efflorescence of atmospherically relevant salts, provided they share a compatible lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Teaching an Old Reagent New Tricks: Synthesis, Unusual Reactivity, and Solution Dynamics of Borohydride Grignard Compounds

Grignard reagents of general formula RMgX (X = Cl - , Br - , I - ) have been utilized in various chemistries for over 100 years. Here, we report that replacing the halide in a Grignard reagent with a reactive borohydride anion adds a new synthetic dimension for these influential compounds. Here, we synthesized the series RMgBH 4 (R=Et, n-Bu, Ph, Bn) and characterized the reactivity toward both organic and inorganic molecules. Using butylmagnesium borohydride (BuMgBH 4 ) as an exemplar, we demonstrate that these compounds possess unique reactivity due to the presence of reducing borohydride groups, resulting in tandem reactivity with organic amides/esters to generate secondary and primary alcohols. Molecular dynamics simulations indicate the stability of BuMgBH 4 is comparable to that of Mg(BH 4 ) 2 + MgBu 2 , validating the Schlenk equilibrium in borohydride Grignard compounds. Metadynamics simulations confirm that the equilibrium is kinetically accessible through solvent-mediated processes. BuMgBH 4 also reacts with CO 2 and NH 3 , revealing potential uses for CO 2 utilization and as a mixed-anion metal borohydride/amide precursor.

36 MATERIALS SCIENCE↗