Heat-shield ablation and sublimation determinations through radioisotope techniques.
Radioisotopic continuous measurement techniques for determination of heat shield ablation and sublimation
HEAT SHIELD↗
SEARCH · Search NASA
Results for “continuity measurements”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Extendable mast used in one shot soil penetrometer
Penetrometer to test soil characteristics has a piercing head with soil instrumentation equipment attached to an expandable mast actuated by compressed air. The penetrometer gives continuous measurements as the mast pushes the piercing head through the soil.
Hotz, G. M.↗
An automatic microwave polarization analyzer
Automatic microwave polarization analyzer which permits instant and continuous measurement of incident wave
MICROWAVE APPARATUS↗
High-temperature rapid-response thermocouple for reducing atmospheres
Thermocouple measures continuously in flowing gaseous hydrogen at temperatures up to 4000 deg F, in environments made hazardous by radiation, and where rapid response and calibration reproducibility are critically important. Thermocouple wires extend continuously, without splice or foreign material, from cold junction to probe's tip.
Gracey, C. M.↗
Discrete control of linear distributed systems with application to the deformable primary mirror of a large orbiting telescope
One of the more significant technological problems associated with the orbital operation of large astronomical telescope's is the fabrication and maintenance of the primary mirror surface to the tolerance required for diffraction-limited performance. An interesting approach to the solution of this problem involves continuously measuring and automatically correcting the optical surface of a thin deformable mirror by means of discrete actuators located on its rear surface: The realization of diffraction-limited performance from a telescope in space by this method rests on the ability of the designer to achieve extremely accurate control of a highly complex, interacting, multivariable system. This paper presents the results of a detailed study of the discrete control of linear distributed systems with specific application to the design of a practical controller for a plant representative of a telescope primary mirror for an orbiting astronomical observatory. The problem of controlling the distributed plant is treated by employing modal techniques to represent variations in the optical figure. Distortion of the mirror surface, which arises primarily from thermal gradients, is countered by actuators working against a backing structure to apply a corrective force distribution to the controlled surface. Each displacement actuator is in series with a spring attached to the mirror by means of a pad intentionally introduced to restrict the excitation of high-order modes. Control is then exerted over a finite number (equal.to the number of actuators) of the most significant modes. Through the application of the modal expansion technique the mirror equation of motion is transformed tb a set of uncoupled, linear, time-invariant, ordinary differential equations. The desired dynamic response and static accuracy may then be achieved by the application of classical single-variable design techniques. The formulation of a quadratic performance index which incorporates a measure of image quality permits determination of the trade-off between the-number of actuators and optical purity. A criterion for defining actuator placement and pad size is presented which minimizes the tendency of the controller to excite the unmonitored modes.
Jeremiah F Creedon↗
A semi-automatic measuring machine
A machine designed to locate automatically a star image on a photographic plate from approximate coordinates on a punched card and to measure and record its position to a micron is described. The main frame of the machine is of granite, as are the x and y coordinate carriages which move on air bearings against granite ways. The system is capable of making measurements continuously over a 10 x 10 inch range by means of a Ferranti moire fringe system, with a least count of one micron.
Strand, K. A.↗
Laser system detects tower deflections
Continuously measure and record deflection of facility during testing. Facility deflections are then subtracted from shroud deflections during data reduction on computer. System is based on tracking light beam by using two-axis photo detector and feeding signals into X and Y servo system.
Fabik, R. H.↗
The variation of atmospheric temperatures at microwave frequencies.
Discussion of the effects of varying meteorological conditions on microwave propagation and on total system temperatures. Microwave atmospheric temperatures at X- and K-bands measured continuously for more than a year are compared with data obtained simultaneously by routine S-band spacecraft tracking.
Reid, M. S.↗
Remote sensing of chlorophyll and temperature in marine and fresh waters.
An airborne differential radiometer was demonstrated to be a sensitive, real-time detector of surface chlorophyll content in water bodies. The instrument continuously measures the difference in radiance between two wavelength bands, one centered near the maximum of the blue chlorophyll a absorption region and the other at a reference wavelength outside this region. Flights were made over fresh water lakes, marine waters, and an estuary, and the results were compared with 'ground truth' measurements of chlorophyll concentration. A correlation between output signal of the differential radiometer and the chlorophyll concentration was obtained. Examples of flight data are illustrated. Simultaneous airborne measurements of chlorophyll content and water temperature revealed that variations in chlorophyll are often associated with changes in temperature. Thus, simultaneous sensing of chlorophyll and temperature provides useful information for studies of marine food production, water pollution, and physical processes such as upwelling.
Arvesen, J. C.↗
Critical configurations (determinantal loci) for range and range difference satellite networks
The observational modes of Geometric Satellite Geodesy are discussed. The geometrical analysis of the problem yielded a regression model for the adjustment of the observations along with a suitable and convenient metric for the least-squares criterion. The determinantal loci (critical configurations) for range networks are analyzed. An attempt is made to apply elements of the theory of variants for this purpose. The use of continuously measured range differences for loci determination is proposed.
Tsimis, E.↗
Optical properties of materials at low temperature and their application to optical detection
A lumped model to represent the photodielectric effect is developed. An analog simulation for a sample in a microwave cavity with a static magnetic field is developed. A system to measure continuously the PDE is analyzed. A performance factor to compared PD detectors versus ac photoconductors is computed. The operating conditions are defined for the appropriate noise conditions. The detectivity of the detector is found to be limited by the semiconductor sample noise.
Hartwig, W. H.↗
Pulse-modulated dual-gas control subsystem for space cabin atmosphere
An atmosphere control subsystem (ACS) was developed for use in a closed manned cabin, such as the Space Shuttle Orbiter. This subsystem uses the Perkin Elmer mass spectrometer for continuous measurement of major atmospheric constituents (H2, H2O, N2, O2, and CO2). The O2 and N2 analog signals are used as inputs to the controller, which produces a pulse-frequency-modulated output to operate the N2 gas admission solenoid valve and an on-off signal to operate the O2 valve. The proportional controller characteristic results in improved control accuracy as compared with previously used on-off controllers having significant dead-band. A 60-day evaluation test was performed on the ACS during which operation was measured at various values of control setpoint and simulated cabin leakage.
Jackson, J. K.↗
Controlled generation of large volumes of atmospheric clouds in a ground-based environmental chamber
Atmospheric clouds were generated in a 23,000 cubic meter environmental chamber as the first step in a two part study on the effects of contaminants on cloud formation. The generation procedure was modeled on the terrestrial generation mechanism so that naturally occurring microphysics mechanisms were operative in the cloud generation process. Temperature, altitude, liquid water content, and convective updraft velocity could be selected independently over the range of terrestrially realizable clouds. To provide cloud stability, a cotton muslin cylinder 29.3 meters in diameter and 24.2 meters high was erected within the chamber and continuously wetted with water at precisely the same temperature as the cloud. The improved instrumentation which permitted fast, precise, and continual measurements of cloud temperature and liquid water content is described.
Hettel, H. J.↗
Response of local vascular volumes to lower body negative pressure stress
The present study involved an intravenous injection of radioactive iodinated serum albumin, equilibration of this isotope within the vascular space, and the continuous measurement of isotope activity over selected anatomical areas before, during and following multiple human LBNP tests. Both rate and magnitude of vascular pooling were distinctly different within each of five selected lower body anatomical areas. In the upper body, all areas except the abdomen showed depletions from their resting vascular volumes during LBNP. The presence of uniquely different pooling patterns in the lower body, the apparent stability of abdominal vascular volumes, and a possible decrease in cerebral blood volume during LBNP represent the major findings of this study.
Wolthuis, R. A.↗
Observations of the interplanetary magnetic field between 0.46 and 1 A.U. by the Mariner 10 spacecraft
Almost continuous measurement of the interplanetary magnetic field (IMF) at a sampling rate of 25 vectors/sec was performed by the magnetic field experiment onboard the Mariner 10 spacecraft during the period November 3, 1973 to April 14, 1974, comprising approximately 5-2/3 solar rotations and extending in radial distance from the sun from 1 to 0.46 AU. A clearly discernible two-sector pattern of field polarity was observed during the last 3-1/2 months of the period, with the dominant polarity toward the sun below the solar equatorial plane. Two compound high-speed solar wind streams were also present during this period, one in each magnetic field sector. Relative fluctuations of the field in magnitude and direction were found to have large time variations, but on average the relative magnitude fluctuations were approximately constant over the range of heliocentric distance covered while the relative directional fluctuations showed a slight decrease on average with increasing distance. The occurrence rate of directional discontinuities was also found to decrease with increasing radial distance from the sun.
Behannon, K. W.↗
Comparison between reflectivity statistics at heights of 3 and 6 km and rain rate statistics at ground level
An experiment was conducted to study the relations between the empirical distribution functions of reflectivity at specified locations above the surface and the corresponding functions at the surface. A bistatic radar system was used to measure continuously the scattering cross section per unit volume at heights of 3 and 6 km. A frequency of 3.7 GHz was used in the tests. It was found that the distribution functions for reflectivity may significantly change with height at heights below the level of the melting layer.
Crane, R. K.↗
Cardiovascular function during sustained +G/z/ stress
The development of aerospace systems capable of very high levels of positive vertical accelerators stress has created a need for a better understanding of the cardiovascular responses to acceleration. Using a canine model, the heart and cardiovascular system were instrumented to continuously measure coronary blood flow, cardiac output, left ventricular and aortic root pressure, and oxygen saturation in the aorta, coronary sinus, and right ventricle. The animals were exposed to acceleration profiles up to +6 G, 120 s at peak G; a seatback angle of 45 deg was simulated in some experiments. Radiopaque contrast medium was injected to visualize the left ventricular chamber, coronary vasculature, aorta, and branches of the aorta. The results suggest mechanisms responsible for arrhythmias which may occur, and subendocardial hemorrhage which has been reported in other animals.
Erickson, H. H.↗
Characteristics of a solar-terrestrial observatory
The operation of the Solar-Terrestrial Observatory is outlined. It will monitor the diurnal, solar rotational, seasonal, and solar cycle variation to aid the understanding of the solar-terrestrial interaction mechanism. The continuous measurements at a space station include in-situ remote sensing, and active probing techniques.
Source record↗