Search NASA⌕ Search

SEARCH · Search NASA

Results for “corroborating data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Low-frequency atmospheric oscillations over the southeastern Pacific

A 40-50 day atmospheric oscillation has recently been reported in the southeastern Pacific based on analyses of satellite-derived microwave brightness temperature data. Prior to this, such oscillations have not been generally recognized in this region. The purpose of this note is to provide corroboration of the microwave analyses from an independent data set, four years of rawinsonde data from Easter Island. Significant spectral peaks with period 45-53 days were found in the zonal wind near the jet core (300-200 mb) and in the temperature on the underside of the jet. The signal is also present in the 100 mb temperature as shown by strong coherence between 100 and 400 mb temperature perturbations. Direct comparison of the 100 mb temperature perturbations and the microwave data shows good agreement. There is also an indication of a lower frequency signal, about 65-84 day period, in the meridional wind at 1000 mb. This signal appears to be vertically evanescent with maximum amplitude at the surface.

Graves, Charles E.↗
DOE OSTI2013

Evaluation of material heterogeneity dosimetric effects using radiochromic film for COMS eye plaques loaded with {sup 125}I seeds (model I25.S16)

Purpose: (1) To measure absolute dose distributions in eye phantom for COMS eye plaques with {sup 125}I seeds (model I25.S16) using radiochromic EBT film dosimetry. (2) To determine the dose correction function for calculations involving the TG-43 formalism to account for the presence of the COMS eye plaque using Monte Carlo (MC) method specific to this seed model. (3) To test the heterogeneous dose calculation accuracy of the new version of Plaque Simulator (v5.3.9) against the EBT film data for this seed model. Methods: Using EBT film, absolute doses were measured for {sup 125}I seeds (model I25.S16) in COMS eye plaques (1) along the plaque's central axis for (a) uniformly loaded plaques (14-20 mm in diameter) and (b) a 20 mm plaque with single seed, and (2) in off-axis direction at depths of 5 and 12 mm for all four plaque sizes. The EBT film calibration was performed at {sup 125}I photon energy. MC calculations using MCNP5 code for a single seed at the center of a 20 mm plaque in homogeneous water and polystyrene medium were performed. The heterogeneity dose correction function was determined from the MC calculations. These function values at various depths were entered into PS software (v5.3.9) to calculate the heterogeneous dose distributions for the uniformly loaded plaques (of all four sizes). The dose distributions with homogeneous water assumptions were also calculated using PS for comparison. The EBT film measured absolute dose rate values (film) were compared with those calculated using PS with homogeneous assumption (PS Homo) and heterogeneity correction (PS Hetero). The values of dose ratio (film/PS Homo) and (film/PS Hetero) were obtained. Results: The central axis depth dose rate values for a single seed in 20 mm plaque measured using EBT film and calculated with MCNP5 code (both in ploystyrene phantom) were compared, and agreement within 9% was found. The dose ratio (film/PS Homo) values were substantially lower than unity (mostly between 0.8 and 0.9) for all four plaque sizes, indicating dose reduction by COMS plaque compared with homogeneous assumption. The dose ratio (film/PS Hetero) values were close to unity, indicating the PS Hetero calculations agree with those from the film study. Conclusions: Substantial heterogeneity effect on the {sup 125}I dose distributions in an eye phantom for COMS plaques was verified using radiochromic EBT film dosimetry. The calculated doses for uniformly loaded plaques using PS with heterogeneity correction option enabled were corroborated by the EBT film measurement data. Radiochromic EBT film dosimetry is feasible in measuring absolute dose distributions in eye phantom for COMS eye plaques loaded with single or multiple {sup 125}I seeds. Plaque Simulator is a viable tool for the calculation of dose distributions if one understands its limitations and uses the proper heterogeneity correction feature.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1987

Cratering and obliteration history of the south polar region of Mars

Results are presented from a comprehensive analysis of crater size frequency distributions compiled from Viking Orbiter images of Martian south polar terrains. Depositional histories for the various terrain units are modelled based on deviations of cumulative crater size frequency plots from an assumed production function. Stratigraphic and morphologic data obtained from visual examination of Viking images are also used, primarily to corroborate inferences concerning ages and obliteration histories derived from the crater data.

Plaut, J. J.↗
DOE OSTI2014

GlyQ-IQ: Glycomics Quintavariate-Informed Quantification with High-Performance Computing and GlycoGrid 4D Visualization

Dense LC-MS datasets have convoluted extracted ion chromatograms with multiple chromatographic peaks that cloud the differentiation between intact compounds with their overlapping isotopic distributions, peaks due to insource ion fragmentation, and noise. Making this differentiation is critical in glycomics datasets because chromatographic peaks correspond to different intact glycan structural isomers. The GlyQ-IQ software is targeted chromatography centric software designed for chromatogram and mass spectra data processing and subsequent glycan composition annotation. The targeted analysis approach offers several key advantages to LC-MS data processing and annotation over traditional algorithms. A priori information about the individual target’s elemental composition allows for exact isotope profile modeling for improved feature detection and increased sensitivity by focusing chromatogram generation and peak fitting on the isotopic species in the distribution having the highest intensity and data quality. Glycan target annotation is corroborated by glycan family relationships and in source fragmentation detection. The GlyQ-IQ software is developed in this work (Part 1) and was used to profile N-glycan compositions from human serum LC-MS Datasets. The companion manuscript GlyQ-IQ Part 2 discusses developments in human serum N-glycan sample preparation, glycan isomer separation, and glycan electrospray ionization. A case study is presented to demonstrate how GlyQ-IQ identifies and removes confounding chromatographic peaks from high mannose glycan isomers from human blood serum. In addition, GlyQ-IQ was used to generate a broad N-glycan profile from a high resolution (100K/60K) nESI-LS-MS/MS dataset including CID and HCD fragmentation acquired on a Velos Pro Mass spectrometer. 101 glycan compositions and 353 isomer peaks were detected from a single sample. 99% of the GlyQ-IQ glycan-feature assignments passed manual validation and are backed with high resolution mass spectra and mass accuracies less than 7 ppm.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2021

Structural Interconversion between Agglomerated Palladium Domains and Mononuclear Pd(II) Cations in Chabazite Zeolites

Palladium-exchanged zeolites are candidate materials for passive NO x adsorption in automotive exhaust aftertreatment, where mononuclear Pd cations behave as precursors to the purported NO x adsorption sites. Yet, the structures of zeolite lattice binding sites capable of stabilizing mononuclear Pd 2+ ions, and the mechanisms that interconvert agglomerated PdO and Pd domains into mononuclear Pd 2+ ions during Pd redispersion treatments, remain incompletely understood. In this work, we use a suite of spectroscopic methods and quantitative site titration techniques to characterize mononuclear and agglomerated Pd species on zeolites with varying material properties and treatment history. Aqueous-phase methods to introduce Pd onto NH 4 -form zeolites initially form mononuclear [Pd(NH 3 ) 4 ] 2+ complexes, but subsequent thermal treatments (573–723 K; air) lead to in situ formation of H 2 that first reduces Pd 2+ to metallic Pd domains, which are then oxidized by air to PdO domains. Progressive treatment of Pd-zeolites in air to higher temperatures (723–1023 K) converts larger fractions of agglomerated PdO to mononuclear Pd 2+ , as quantified by H 2 temperature programmed reduction, because higher temperature treatments facilitate Pd redispersion toward deeper locations within chabazite (CHA) crystallites, which is corroborated by complementary titrimetric and spectroscopic data. Pd-CHA zeolites synthesized with similar bulk Pd and framework Al content, but varying framework Al arrangement, provide evidence that six-membered rings (6-MR) hosting paired Al sites (Al–O–(Si–O) x –Al, x = 1, 2) stabilize Pd 2+ ions and that otherwise isolated Al sites can stabilize [PdOH] + species, identifiable by an IR OH stretch at 3660 cm –1 . These findings clarify the underlying chemical processes and gas environments that cause Pd agglomeration in zeolites and their subsequent redispersion to mononuclear Pd 2+ ions, which prefer binding at 6-MR paired Al sites in CHA, and indicate that higher temperature air treatments lead to more uniform Pd spatial distributions throughout zeolite crystallites.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Methyl quantum tunneling in ionic liquid [DMIm][TFSI] facilitated by Bis(trifluoromethane)sulfonimide lithium salt

Here, we probe, for the first time, quantum tunneling in the methyl groups of the ionic liquid [DMIm][TFSI] facilitated by the presence of Bis(trifluoromethane)sulfonimide lithium salt. The observation of tunneling is made possible by crystallization, rather than vitrification, of [DMIm][TFSI] at low temperature. Neutron scattering measurements detect quantum tunneling excitations at ~27 μeV at temperatures below 30 K in the presence of LiTFSI at a concentration of 1 mol/kg, but not in salt-free [DMIm][TFSI]. This indicates that the methyl rotational potential barrier is reduced by the presence of LiTFSI, thus bringing the tunneling excitations into the measurable range. The salt-induced reduction of the rotational barrier is corroborated by quasi-elastic scattering data associated with stochastic re-orientation of methyl groups measured between 40 and 60 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Dimensional crossover of electron weak localization in ZnO/TiO{sub x} stacked layers grown by atomic layer deposition

We report on the dimensional crossover of electron weak localization in ZnO/TiO{sub x} stacked layers having well-defined and spatially-localized Ti dopant profiles along film thickness. These films were grown by in situ incorporation of sub-monolayer TiO{sub x} on the growing ZnO film surface and subsequent overgrowth of thin conducting ZnO spacer layer using atomic layer deposition. Film thickness was varied in the range of ∼6–65 nm by vertically stacking different numbers (n = 1–7) of ZnO/TiO{sub x} layers of nearly identical dopant-profiles. The evolution of zero-field sheet resistance (R{sub ◻}) versus temperature with decreasing film thickness showed a metal to insulator transition. On the metallic side of the metal-insulator transition, R{sub ◻}(T) and magnetoresistance data were found to be well corroborated with the theoretical framework of electron weak localization in the diffusive transport regime. The temperature dependence of both R{sub ◻} and inelastic scattering length provided strong evidence for a smooth crossover from 2D to 3D weak localization behaviour. Results of this study provide deeper insight into the electron transport in low-dimensional n-type ZnO/TiO{sub x} stacked layers which have potential applications in the field of transparent oxide electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Elevated nocturnal respiratory rates in the mitochondria of CAM plants: current knowledge and unanswered questions

Abstract Crassulacean acid metabolism (CAM) is a metabolic adaptation that has evolved convergently in 38 plant families to aid survival in water-limited niches. Whilst primarily considered a photosynthetic adaptation, CAM also has substantial consequences for nocturnal respiratory metabolism. Here, we outline the history, current state and future of nocturnal respiration research in CAM plants, with a particular focus on the energetics of nocturnal respiratory oxygen consumption. Throughout the 20th century, research interest in nocturnal respiration occurred alongside initial discoveries of CAM, although the energetic and mechanistic implications of nocturnal oxygen consumption and links to the operation of the CAM cycle were not fully understood. Recent flux balance analysis (FBA) models have provided new insights into the role that mitochondria play in the CAM cycle. Several FBA models have predicted that CAM requires elevated nocturnal respiratory rates, compared to C3 species, to power vacuolar malic acid accumulation. We provide physiological data, from the genus Clusia, to corroborate these modelling predictions, thereby reinforcing the importance of elevated nocturnal respiratory rates for CAM. Finally, we outline five unanswered questions pertaining to nocturnal respiration which must be addressed if we are to fully understand and utilize CAM plants in a hotter, drier world.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Fiber-Coupled Multipass NIR Sensor for In Situ, Real-Time Water Vapor Outgassing Monitoring

This work presents the recent development of a fiber-coupled multipass near-infrared (NIR) gas sensor used to monitor water vapor desorption of small material coupons. The gas sensor design employs a White cell topology to maximize the optical path length over a compact, hand-size footprint. Water vapor concentrations are quantified over a large dynamic range by simultaneously applying wavelength modulation and tunable diode laser absorption spectroscopy techniques. A custom headspace optimized for material desorption experiments is assembled using commercially available vacuum chamber components. We provide in situ measurements of water vapor desorption from two geometries of the industrially important silicone elastomer Sylgard-184 as a case study for sensor viability. To corroborate the results, the gas sensor data are compared to numerical simulations based on a triple-mode diffusion–sorption model, consisting of Henry, Langmuir, and Pooling modes.

gas sensor↗
NASA NTRS1975

Fluid manifold design for a solar energy storage tank

A design technique for a fluid manifold for use in a solar energy storage tank is given. This analytical treatment generalizes the fluid equations pertinent to manifold design, giving manifold pressures, velocities, and orifice pressure differentials in terms of appropriate fluid and manifold geometry parameters. Experimental results used to corroborate analytical predictions are presented. These data indicate that variations in discharge coefficients due to variations in orifices can cause deviations between analytical predictions and actual performance values.

Humphries, W. R.↗
NASA NTRS1977

Fatigue criterion for the design of rotating shafts under combined stress

A revised approach to the design of transmission shafting which considers the flexure fatigue characteristics of the shaft material under combined cyclic bending and static torsion stress is presented. A fatigue failure relation, corroborated by published combined stress test data, is presented which shows an elliptical variation of reversed bending endurance strength with static torsional stress. From this elliptical failure relations, a design formula for computing the diameter of rotating solid shafts under the most common condition of loading is developed.

Loewenthal, S. H.↗
NASA NTRS1981

Burst statistics of Viterbi decoding

A mathematical model of Viterbi decoder burst error performance is presented. This model allows for computer generation of Viterbi-like error sequences quickly and inexpensively for applications where large amounts of data are required. The model is corroborated through comparisons with actual software decoder simulations.

Deutsch, L. J.↗
NASA NTRS1985

Experimental and analytical study of ceramic-coated turbine-tip shroud seals for small turbine engines

The results of an experimental and analytical evaluation of ceramic turbine tip shrouds within a small turbine engine operating environment are presented. The ceramic shrouds were subjected to 1001 cycles between idle and high power and steady-state conditions for a total of 57.8 engine hr. Posttest engine inspection revealed mud-flat surface cracking, which was attributed to microcracking under tension with crack penetration to the ceramic and bond coat interface. Sections and micrographs tend to corroborate the thesis. The engine test data provided input to a thermomechanical analysis to predict temperature and stress profiles throughout the ceramic gas-path seal. The analysis predicts cyclic thermal stresses large enough to cause the seal to fail. These stresses are, however, mitigated by inelastic behavior of the shroud materials and by the microfracturing that tensile stresses produce. Microfracturing enhances shroud longevity during early life but provides the failure mechanism during life but provides the failure mechanism during extended life when coupled with the time dependent inelastic materials effects.

Biesiadny, T. J.↗
NASA NTRS1993

Radio stimulation and diagnostics of space plasmas

We have investigated the small-scale topside ionospheric plasma structures first observed at Millstone Hill, Massachusetts with the 440 MHz incoherent scatter radar. These small-scale obliquely propagating plasma modes occurring in the vicinity of the midlatitude ionospheric trough, have large radar cross-sections and narrow spectral widths. They have, until recently, been dismissed solely as hard target contamination of the incoherent scatter radar. The geophysical conditions associated with the ionospheric trough, such as the field-aligned current activity and steep plasma density gradients, suggest that these recently discovered small-scale topside ionospheric plasmas may also appear in the auroral and polar ionosphere. In fact, this speculation has been corroborated by the preliminary experiments and data analyses at Tromso, Norway and Sondrestromfjord, Greenland. The primary research results are highlighted. Described in Section 3 are the experiments conducted at Arecibo, Puerto Rico in the past summer for simulating the geophysical conditions of generating these topside ionospheric plasma structures. Recommendation for the future research is finally given. Attached as the appendix of this report are several chapters which present the detailed results of research in the concerned topside ionospheric clutter. Highlights of the research results include: (1) causes of the enhanced radar backscatter (ERB) phenomenon; (2) occurrence of the ERB phenomenon; (3) altitudes of the ERB phenomenon; (4) strength of the ERB returns; (5) range of altitudes of the ERB returns; (6) occurrence frequency of the ERB phenomenon; (7) Doppler effect of the ERB phenomenon; (8) persistency of the ERB; and (9) distinction between ERB phenomenon and space object signatures.

Lee, Min-Chang↗
NASA NTRS1993

Thermodynamic balance of three-dimensional stratospheric winds derived from a data assimilation procedure

The NASA/Goddard three-dimensional chemistry and transport model is driven by winds from a stratospheric data assimilation system. Synoptic- and planetary-scale patterns, apparent in satellite observations of trace constituents, are successfully reproduced for seasonal integrations. As model integrations proceed, however, the quality of simulations decreases, and systematic differences between calculation and measurement appear. The differences are explained by examining the zonal-mean residual circulation. The vertical velocity w-bar (sup star) is calculated two ways: (1) from the diabatic heating rates and temperature tendency and (2) from the Eulerian vertical velocity and the horizontal eddy heat flux convergence. The results from these calculations differ substantially. Periodic insertion of observational data during the assimilation process continually shocks the general circulation model and produces these differences, which leads to an overestimate of the mean vertical heat and cconstituent transport. Such differences are expected to be general to all data assimilation products. This interpretation is corroborated by two-dimensional (2D) model calculations. When w-bar(sup star) is calculated from (2), the 2D ozone evolution is unrealistic and qualitatively similar to the 3D model simulation. The 2D ozone evolution is reasonable when w-bar (sup star) from (1).

Weaver, Clark J.↗
NASA NTRSDate not supplied

Improved Models for Simulation of Cryogenic Spray Cooling for Propellant Tank Chilldown

This paper presents advances in spray boiling models for cryogenic fluids that exhibit strong variation in thermodynamic properties; it accounts for the interaction of the spray droplets with walls and the complex heat transfer and boiling processes that play a vital role in chilling solid surfaces. The model has been developed by corroborating and validating it with test data in liquid nitrogen obtained at the University of Connecticut. The test data includes detailed visualization and plate temperature measurements for liquid nitrogen sprays impinging on a warm test plate and subsequent transient chilldown of the plate. Simulations of transient plate chilldown in liquid nitrogen were carried out and temperature histories at various locations on the plate were compared with test measurements. The final paper will present sensitivity studies and additional comparisons with test data.

Computational Fluid Dynamics, Cryogenic, Spray Chi↗
NASA NTRSDate not supplied

Improved Models for Simulation of Cryogenic Spray Cooling for Propellant Tank Chilldown

This paper presents advances in spray boiling models for cryogenic fluids that exhibit strong variation in thermodynamic properties; it accounts for the interaction of the spray droplets with walls and the complex heat transfer and boiling processes that play a vital role in chilling solid surfaces. The model has been developed by corroborating and validating it with test data in liquid nitrogen obtained at the University of Connecticut. The test data includes detailed visualization and plate temperature measurements for liquid nitrogen sprays impinging on a warm test plate and subsequent transient chilldown of the plate. Simulations of transient plate chilldown in liquid nitrogen were carried out and temperature histories at various locations on the plate were compared with test measurements to demonstrate the validity of the spray boiling models that have been developed for cryogens.

Boiling↗
NASA NTRSDate not supplied

Improved Models for Simulation of Cryogenic Spray Cooling for Propellant Tank Chilldown

This paper presents advances in spray boiling models for cryogenic fluids that exhibit strong variation in thermodynamic properties; it accounts for the interaction of the spray droplets with walls and the complex heat transfer and boiling processes that play a vital role in chilling solid surfaces. The model has been developed by corroborating and validating it with test data in liquid nitrogen obtained at the University of Connecticut. The test data includes detailed visualization and plate temperature measurements for liquid nitrogen sprays impinging on a warm test plate and subsequent transient chilldown of the plate. Simulations of transient plate chilldown in liquid nitrogen were carried out and temperature histories at various locations on the plate were compared with test measurements to demonstrate the validity of the spray boiling models that have been developed for cryogens.

Boiling↗