SEARCH · Search NASA

Results for “course”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Cost Estimation of a Permanent Magnet Synchronous Machine for Use in Adjustable Speed-Pumped Storage Hydropower

Electric machine design has become an easier process with the availability of computers in recent decades. However, the interest in electric machine design among students has declined. University-level design courses must compete with courses perceived as more desirable by the potential job market. Hence, the power system engineers with this expertise are very few and are nearing retirement. Contrarily, renewable energy has been picking up in the past few decades. The indeterminacy and variation of renewable energy sources require a balancing mechanism to maintain the constant voltage and frequency of the grid. Adjustable-Speed Pumped-Storage Hydropower plants are considered the contender for future energy storage, providing large capacity and fast-acting response. Large-scale hydropower applications depend on the natural characteristics of each project site, making less expensive, off-the-shelf generators unfeasible. This work gives a shortcut to estimate the cost of constructing a permanent magnet generator for low-volume manufacturing.

13 HYDRO ENERGY↗

DOE OSTI2022

MDPCT1 Quench Data and Performance Analysis

MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T and no evidence of degradation, the outer coils degraded over the course of testing. By adopting new measurement and analysis techniques at FNAL we are discussing in detail what happened. Both success and failure in our diagnostics are discussed. The evolution of techniques over the course of two tests (and three thermal cycles) shows the path to address challenges brought by the first four-layer magnet tested at FNAL. This paper presents the analysis of quench data along with diagnostic features and complementary measurements taken in support of the magnet performance analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Mycorrhizal associations of temperate forest seedlings mediate rhizodeposition, but not soil carbon storage, under elevated nitrogen availability

Abstract Tree‐mycorrhizal associations are associated with patterns in nitrogen (N) availability and soil organic matter storage; however, we still lack a mechanistic understanding of what tree and fungal traits drive these patterns and how they will respond to global changes in soil N availability. To address this knowledge gap, we investigated how arbuscular mycorrhizal (AM)‐ and ectomycorrhizal (EcM)‐associated seedlings alter rhizodeposition in response to increased seedling inorganic N acquisition. We grew four species each of EcM and AM seedlings from forests of the eastern United States in a continuously 13 C‐labeled atmosphere within an environmentally controlled chamber and subjected to three levels of 15 N‐labeled fertilizer. We traced seedling 15 N uptake from, and 13 C‐labeled inputs (net rhizodeposition) into, root‐excluded or ‐included soil over a 5‐month growing season. N uptake by seedlings was positively related to rhizodeposition for EcM‐ but not AM‐associated seedlings in root‐included soils. Despite this contrast in rhizodeposition, there was no difference in soil C storage between mycorrhizal types over the course of the experiment. Instead root‐inclusive soils lost C, while root‐exclusive soils gained C. Our findings suggest that mycorrhizal associations mediate tree belowground C investment in response to inorganic N availability, but these differences do not affect C storage. Continued soil warming and N deposition under global change will increase soil inorganic N availability and our seedling results indicate this could lead to greater belowground C investment by EcM‐associated trees. This potential for less efficient N uptake by EcM‐trees could contribute to AM‐tree success and a shift toward more AM‐dominated temperate forests.

Fitch, Amelia A.↗

DOE OSTI2022

What drives forest carbon storage? The ramifications of source–sink decoupling

As the climate changes and scientists seek to project its future course, an important uncertainty lies in the response of forests. Will rising atmospheric carbon dioxide (CO 2 ) and lengthening growing seasons relieve limitations to tree growth, allowing increased carbon (C) sequestration in long-lived woody tissues and providing a negative feedback to climate change? Or will increasing heat and drought stress reduce growth and increase mortality, resulting in a positive feedback to climate change? Furthermore, to answer this question, global C cycle models simulate photosynthesis under future conditions, using simple plant C allocation schemes to estimate the amount of C sequestered in woody growth vs that allocated to short-lived pools that are more rapidly respired back to the atmosphere as CO 2 (Fatichi et al., 2014). However, there is growing evidence that these schemes are too simplistic, as wood production is frequently decoupled from photosynthesis (Delpierre et al., 2016a,b; Etzold et al., 2022), either through the passive limitation of woody tree growth by environmental conditions or active allocation prioritising other sinks. Needed, then, is an understanding of how woody growth is jointly shaped by photosynthesis (i.e. source limitation) and demand from various C sinks (i.e. sink limitation) across species and biomes (Körner, 2015). In this issue of New Phytologist, Martínez-Sancho et al. (2022; pp. 58–70) exemplifies the type of research needed to improve our ability to predict forest C sequestration under climate change, using an innovative approach to describe the seasonal course of C sequestration in tree stem growth and how it is affected by drought.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Numerical simulation projects in micromagnetics with Jupyter

We report a case study where an existing materials science course was modified to include numerical simulation projects on the micromagnetic behavior of materials. The Ubermag micromagnetic simulation software package is used in order to solve problems computationally. The simulation software is controlled through the Python code in Jupyter notebooks. Our experience is that the self-paced problem-solving nature of the project work can facilitate a better in-depth exploration of the course contents. We discuss which aspects of the Ubermag and the project Jupyter ecosystem have been beneficial for the students' learning experience and which could be transferred to similar teaching activities in other subject areas.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Introducing Quantum Entanglement and Superposition to Secondary School Students Using Portable, Hands-on Exhibits

Historically, the teaching of quantum mechanics has been reserved for advanced undergraduate physics courses, mostly due to how far removed from classical intuition the subject is. Extensive mathematical background is usually a prerequisite for college-level introductory quantum mechanics courses. However, several ways to introduce quantum mechanics at the secondary school level have been suggested and developed. Unlike most other topics in physics, it is difficult to find intuitive examples of quantum phenomena outside of a specialized laboratory; additionally, straightforward hands-on demonstrations, activities, and experiments are somewhat limited.

Educational aids↗

DOE OSTI2025

Modeling suggests SARS-CoV-2 rebound after nirmatrelvir-ritonavir treatment is driven by target cell preservation coupled with incomplete viral clearance

In a subset of SARS-CoV-2-infected individuals treated with the antiviral nirmatrelvir-ritonavir, the virus rebounds following treatment. The mechanisms driving this rebound are not well understood. We used a mathematical model to describe the longitudinal viral load dynamics of 51 individuals treated with nirmatrelvir-ritonavir, 20 of whom rebounded. Target cell preservation, either by a robust innate immune response or initiation of N-R near the time of symptom onset, coupled with incomplete viral clearance, appears to be the main factor leading to viral rebound. Moreover, the occurrence of viral rebound is likely influenced by the time of treatment initiation relative to the progression of the infection, with earlier treatments leading to a higher chance of rebound. A comparison with an untreated cohort suggests that early treatments with nirmatrelvir-ritonavir may be associated with a delay in the onset of an adaptive immune response. Nevertheless, our model demonstrates that extending the course of nirmatrelvir-ritonavir treatment to a 10-day regimen may greatly diminish the chance of rebound in people with mild-to-moderate COVID-19 and who are at high risk of progression to severe disease. Altogether, our results suggest that in some individuals, a standard 5-day course of nirmatrelvir-ritonavir starting around the time of symptom onset may not completely eliminate the virus. Thus, after treatment ends, the virus can rebound if an effective adaptive immune response has not fully developed. These findings on the role of target cell preservation and incomplete viral clearance also offer a possible explanation for viral rebounds following other antiviral treatments for SARS-CoV-2.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Temporal variation in skin microbiota of cohabitating amphibians

Temporal changes and transmission patterns in host-associated microbial communities have important implications for host health. The diversity of amphibian skin microbial communities is associated with disease outcome in amphibians exposed to the fungal pathogen Batrachochytrium dendrobatidis (Bd). To successfully develop conservation strategies against Bd, we need a comprehensive understanding of how skin microbes are maintained and transmitted over time within populations. Here we used 16S rRNA sequence analysis to compare Epipedobates anthonyi frogs housed with one conspecific to frogs housed singly at four time points over the course of 1 year. We found that both α and β diversity of frog skin bacterial communities changed significantly over the course of the experiment. Specifically, we found that bacterial communities of cohabitating frogs became more similar over time. We also observed that some bacterial taxa were differentially abundant between frogs housed singly and frogs housed with a conspecific. These results suggest that conspecific contact may play a role in mediating amphibian skin microbial diversity and that turnover of skin microbial communities can occur across time. Our findings provide rationale for future studies exploring horizontal transmission as a potential mechanism of host-associated microbial maintenance in amphibians.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Interactive Metadata Integration with Brick

Many different digital representations of a building are produced over the course of its lifecycle. While these representations individually contain metadata required to support different stages of the building's lifecycle, they are largely not interoperable due to differences in structure, syntax and semantics. This impedes the development and deployment of data-driven applications providing fault detection and diagnosis, virtual metering or optimal control. [4] introduces a new platform for the continuous curation of a unified, Brick [1]-based metadata model that can be maintained throughout the building lifecycle. In this demonstration, we present a live proof-of-concept implementation of the platform with support for several metadata representations in the context of a simulated building lifecycle.

Fierro, Gabe↗

DOE OSTI2021

Understanding Evolution of Lithium Trivanadate Cathodes During Cycling via Reformulated Physics-Based Models and Experiments

Degradation of lithium trivanadate ( Li x V 3 O 8 ) cathodes has been widely reported in the literature, but studies have offered little insight towards developing a detailed understanding of the evolution of the active material, and have been inconclusive as to the root cause of degradation. Here, we refit a validated physics-based model to discharge curves over the course of cycling at C/5, and use the evolution of the model parameters to track evolution of the cathode. A regularization penalty for adjusting model parameters from the validated model is introduced as a framework to identify which model parameters can explain a significant portion of the observed change in the voltage profile over the course of cycling. SEM reveals that lithium trivandate particles fracture upon cycling at C/5, consistent with the results of the parameter estimation, deactivation of lithium trivanadate and faster diffusion of lithium within the active particles. The physics-based model is then used to design modified cycling protocols which identify the phase transformation during discharge of lithium trivanadate as the driver of the particle fracture and capacity fade.

25 ENERGY STORAGE↗

DOE OSTI2022

Parameter Estimation for Electrode Degradation: Learning in the Face of Model-Experiment Discrepancies

Use of physics-based models to interpret battery degradation data over the course of cycling can provide deeper physical insight into the internal states of the system and how they evolve. We present a neural network trained on simulations generated by a previously published physics-based model for a lithium trivanadate (LVO) cathode to estimate parameters that evolve over the course of cycling. We focus on the robustness of the neural network through two case studies that probe different kinds of discrepancies between model and experiment: nonideal data and imperfect model. In the former, the experimental protocols do not meet the assumption made in the training data generated by the physics-based model, while in the latter, the physics-based model fails to describe all of the measured cathode behavior even under ideal conditions. When there is total model-experiment agreement, a neural network estimates parameters with improved accuracy compared to a maximum likelihood analysis using the same set of simulations. However, in both types of model-experiment discrepancy, the neural network returned biased parameter estimates. We introduce a data augmentation procedure into the neural network training to mitigate these effects and improve robustness, and employ it to estimate parameters for a cycling LVO cathode.

Mayilvahanan, Karthik S. (ORCID:0000000316282332)↗

DOE OSTI2020

STAR

Structured Threat Automated Response (STAR) is a script that creates a python run-time for automated response action included in the Structure Threat Information Expression (STIX) Course of Action object. This script can parse a valid STIX json file and execute the included Course of Action.

McClurg, BryceL↗

DOE OSTI2022

A new shallow-water mud crab of the genus Hexapanopeus Rathbun, 1898 from Belize (Crustacea: Decapoda: Panopeidae)

A new species of panopeid crab from shallow coastal waters of Belize is formally described and named based upon comparative study of three small specimens obtained in the course of a regional biodiversity survey of decapod crustaceans. The herein designated holotype of Hexapanopeus klausruetzleri n. sp. is a specimen previously included in a comparative molecular phylogenetic analysis that showed it to be closely related to, but genetically distinct from, the western Atlantic species Hexapanopeus angustifrons (Benedict & Rathbun, 1891). Hexapanopeus klausruetzleri n. sp. differs from this widely reported warm-temperate species in both its smoother carapace and pereopod surfaces and its generally more lobiform anterolateral teeth. The unique male first gonopod of the new species also strongly supports its morphological separation from all known congeners and other superficially similar western Atlantic panopeids with which it might be confused. To date, mature females have not been found, and the limited available collections are restricted to the vicinity of Carrie Bow Cay and nearby waters. Fourteen additional species of small panopeid and pseudorhombilid crabs, similar to Hexapanopeus klausruetzleri n. sp. in size and general habitus, were taken in the course of our studies in Belize. Most have not been previously reported from these waters, and several warrant further study to confirm their identifications.

Zoology↗

DOE OSTI2020

Analytical Investigation of the Role of Lateral Mixing in the Evolution of Nonprecipitating Cumulus. Part II: Dissolving Stage

A minimalistic analytical model allowing analysis of the dissolving stage of nonprecipitating convective clouds is proposed. The model takes into account two mechanisms: turbulent mixing with a dry environment and cloud volume settling. The temporal changes in the spatial structure of a cloud and in its immediate environment in the course of cloud dissolving are analyzed. The comparison of the effects of a temperature increase in the course of cloud descent and mixing with dry surrounding air shows that the descent is a dominating factor determining a decrease in the liquid water content (LWC), while mixing has a stronger effect on the cloud shape. Narrowing/broadening of clouds due to lateral mixing with dry air during cloud dissolving is determined by the potential evaporation parameter proportional to the ratio of the saturation deficit in the cloud environment to LWC. An equation for cloud dissolving time is obtained. After a cloud totally dissolves, it leaves behind an area with humidity exceeding that of the environment. The main parameter determining the dissolving time is the downdraft velocity. It should exceed 50 cm s -1 in order to provide reasonable dissolving time. The turbulent intensity, LWC, and humidity of the environment air also have an impact on dissolving time: the lower the LWC and the humidity of environment air, the faster cloud dissolving is. The simple solution presented in this paper can be useful for evaluation of cloud characteristics at the dissolving stage and can be included in procedures of parameterization of cloud cover formed by nonprecipitating or slightly precipitating cumulus clouds (Cu). Values of the environment humidity and temperature, LWC at cloud top, cloud width, vertical velocity of downdraft, and the turbulent coefficient should be parameters of this parameterization.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

A core lighting curriculum for university students and lighting professionals

Here, in collaboration with a group of lighting professionals, learning outcomes were defined, prioritized, organized and mapped to a three-course sequence of lighting courses within a Bachelor of Science in Architectural Engineering degree programme. Syllabi and educational exercises were developed to support the learning outcomes – including classroom activities, homework assignments and design projects. The learning exercises balance the technical foundations of applied illuminating engineering with the artistic aspects of applied lighting design and are intended to promote significant and lasting learning by providing students with education that is useful and relevant to current lighting practice. The process for identifying and prioritizing lighting content is described, a process that could be adapted by other lighting educators to other pedagogical contexts. The syllabi and learning exercises are disseminated for reuse or adaptation, or for self-study by independent learners.

42 ENGINEERING↗

DOE OSTI2023

COVID-19 prevention at institutions of higher education, United States, 2020–2021: implementation of nonpharmaceutical interventions

Background, In early 2020, following the start of the coronavirus disease 2019 (COVID-19) pandemic, institutions of higher education (IHEs) across the United States rapidly pivoted to online learning to reduce the risk of on-campus virus transmission. We explored IHEs’ use of this and other nonpharmaceutical interventions (NPIs) during the subsequent pandemic-affected academic year 2020–2021. Methods, From December 2020 to June 2021, we collected publicly available data from official webpages of 847 IHEs, including all public (n = 547) and a stratified random sample of private four-year institutions (n = 300). Abstracted data included NPIs deployed during the academic year such as changes to the calendar, learning environment, housing, common areas, and dining; COVID-19 testing; and facemask protocols. We performed weighted analysis to assess congruence with the October 29, 2020, US Centers for Disease Control and Prevention (CDC) guidance for IHEs. For IHEs offering ≥50% of courses in person, we used weighted multivariable linear regression to explore the association between IHE characteristics and the summated number of implemented NPIs. Results, Overall, 20% of IHEs implemented all CDC-recommended NPIs. The most frequently utilized NPI was learning environment changes (91%), practiced as one or more of the following modalities: distance or hybrid learning opportunities (98%), 6-ft spacing (60%), and reduced class sizes (51%). Additionally, 88% of IHEs specified facemask protocols, 78% physically changed common areas, and 67% offered COVID-19 testing. Among the 33% of IHEs offering ≥50% of courses in person, having < 1000 students was associated with having implemented fewer NPIs than IHEs with ≥ 1000 students. Conclusions, Only 1 in 5 IHEs implemented all CDC recommendations, while a majority implemented a subset, most commonly changes to the classroom, facemask protocols, and COVID-19 testing. IHE enrollment size and location were associated with degree of NPI implementation. Additional research is needed to assess adherence to NPI implementation in IHE settings.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Gut microbiome dynamics and associations with mortality in critically ill patients

Abstract Background Critical illness and care within the intensive care unit (ICU) leads to profound changes in the composition of the gut microbiome. The impact of such changes on the patients and their subsequent disease course remains uncertain. We hypothesized that specific changes in the gut microbiome would be more harmful than others, leading to increased mortality in critically ill patients. Methods This was a prospective cohort study of critically ill adults in the ICU. We obtained rectal swabs from 52 patients and assessed the composition the gut microbiome using 16 S rRNA gene sequencing. We followed patients throughout their ICU course and evaluated their mortality rate at 28 days following admission to the ICU. We used selbal, a machine learning method, to identify the balance of microbial taxa most closely associated with 28-day mortality. Results We found that a proportional ratio of four taxa could be used to distinguish patients with a higher risk of mortality from patients with a lower risk of mortality (p = .02). We named this binarized ratio our microbiome mortality index (MMI). Patients with a high MMI had a higher 28-day mortality compared to those with a low MMI (hazard ratio, 2.2, 95% confidence interval 1.1–4.3), and remained significant after adjustment for other ICU mortality predictors, including the presence of the acute respiratory distress syndrome (ARDS) and the Acute Physiology and Chronic Health Evaluation (APACHE II) score (hazard ratio, 2.5, 95% confidence interval 1.4–4.7). High mortality was driven by taxa from theAnaerococcus(genus) andEnterobacteriaceae(family), while lower mortality was driven byParasutterellaandCampylobacter(genera). Conclusions Dysbiosis in the gut of critically ill patients is an independent risk factor for increased mortality at 28 days after adjustment for clinically significant confounders. Gut dysbiosis may represent a potential therapeutic target for future ICU interventions.

Gastroenterology & Hepatology↗

DOE OSTI2022

Current Progress of the Final Design of a Subcritical Assembly at the Oak Ridge National Laboratory

During the past decade, the US Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Nuclear Criticality Safety Program (NCSP) has been coordinating nuclear criticality safety (NCS) courses to provide training and qualification to new staff, supervisors, managers, regulators, and other professionals involved with NCS. To address the growing need for more NCS training possibilities, a subcritical assembly was designed at Oak Ridge National Laboratory (ORNL). The Oak Ridge Subcritical Assembly (ORSA), operated at ORNL, could be used in a new course for fissile material handlers/operators or as a backup training facility for currently existing NCSP hands-on NCS training. This paper describes some of the design steps necessary for obtaining a final ORSA design, beginning with a successful feasibility study performed in 2020. Numerous parameters within each main element of the assembly were considered, such as the reflector used, the type of fuel coating or plating used, and the number of fuel plates used. The design choices related to each parametric study described in this paper are detailed and justified at the end of each subsection. An overview of the current final design characteristics of ORSA and the experiments’ possibilities is also provided. ORSA will be built with fuel plates from legacy Aerojet General Nucleonics (AGN)-201M research reactors currently stored at the Y-12 National Security Complex (Y-12). The cylindrical fuel plates comprise UO 2 particles embedded in polyethylene and have a nominal enrichment of 19.5 ± 0.5 wt % 235 U. The basis for the final design was the feasibility study from 2020. In the feasibility study, ORSA achieved k eff = 0.95, corresponding to a multiplication factor of 20, with approximately 620 g of 235 U (four 4 cm plates, three 2 cm plates, and two 1 cm plates) and an 8.5 cm thick graphite reflector radially and on top of the assembly. The bottom of the assembly has a graphite thickness of 5 cm, and the chosen graphite density was 2.3 g/cm 3 . All design calculations were performed using SCALE 6.2.4 KENO-VI and with the ENDF/B VII.1 Continuous Energy cross-section library.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗