Search NASA⌕ Search

SEARCH · Search NASA

Results for “data parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Parameterized Cross Sections for Pion Production in Proton-Proton Collisions

An accurate knowledge of cross sections for pion production in proton-proton collisions finds wide application in particle physics, astrophysics, cosmic ray physics, and space radiation problems, especially in situations where an incident proton is transported through some medium and knowledge of the output particle spectrum is required when given the input spectrum. In these cases, accurate parameterizations of the cross sections are desired. In this paper much of the experimental data are reviewed and compared with a wide variety of different cross section parameterizations. Therefore, parameterizations of neutral and charged pion cross sections are provided that give a very accurate description of the experimental data. Lorentz invariant differential cross sections, spectral distributions, and total cross section parameterizations are presented.

Blattnig, Steve R.↗
NASA NTRS2014

An Improved Cryosat-2 Sea Ice Freeboard Retrieval Algorithm Through the Use of Waveform Fitting

We develop an empirical model capable of simulating the mean echo power cross product of CryoSat-2 SAR and SAR In mode waveforms over sea ice covered regions. The model simulations are used to show the importance of variations in the radar backscatter coefficient with incidence angle and surface roughness for the retrieval of surfaceelevation of both sea ice floes and leads. The numerical model is used to fit CryoSat-2 waveforms to enable retrieval of surface elevation through the use of look-up tables and a bounded trust region Newton least squares fitting approach. The use of a model to fit returns from sea ice regions offers advantages over currently used threshold retrackingmethods which are here shown to be sensitive to the combined effect of bandwidth limited range resolution and surface roughness variations. Laxon et al. (2013) have compared ice thickness results from CryoSat-2 and IceBridge, and found good agreement, however consistent assumptions about the snow depth and density of sea ice werenot used in the comparisons. To address this issue, we directly compare ice freeboard and thickness retrievals from the waveform fitting and threshold tracker methods of CryoSat-2 to Operation IceBridge data using a consistent set of parameterizations. For three IceBridge campaign periods from March 20112013, mean differences (CryoSat-2 IceBridge) of 0.144m and 1.351m are respectively found between the freeboard and thickness retrievals using a 50 sea ice floe threshold retracker, while mean differences of 0.019m and 0.182m are found when using the waveform fitting method. This suggests the waveform fitting technique is capable of better reconciling the seaice thickness data record from laser and radar altimetry data sets through the usage of consistent physical assumptions.

CryoSat-2↗
NASA NTRS1989

Parameterized desert/clear atmosphere limb-darkening model derived from earth radiation budget satellite along-track measurements

A parameterized desert/clear atmosphere limb-darkening model was derived using longwave measurements from the Earth Radiation Budget Satellite operating in a unique along-track mode that allows all points along the ground track to be viewed over an entire range of viewing zenith angles at essentially constant solar zenith angle. Application of the model to radiances for scenes defined as clear desert by the Earth Radiation Budget Experiment data analysis algorithms shows that this parameterized model reflects the geographical and diurnal behavior expected for the limb-darkening phenomenon.

Brooks, David R.↗
NASA NTRS2001

Retrieval of Polar Stratospheric Cloud Microphysical Properties from Lidar Measurements: Dependence on Particle Shape Assumptions

A retrieval algorithm has been developed for the microphysical analysis of polar stratospheric cloud (PSC) optical data obtained using lidar instrumentation. The parameterization scheme of the PSC microphysical properties allows for coexistence of up to three different particle types with size-dependent shapes. The finite difference time domain (FDTD) method has been used to calculate optical properties of particles with maximum dimensions equal to or less than 2 mu m and with shapes that can be considered more representative of PSCs on the scale of individual crystals than the commonly assumed spheroids. Specifically. these are irregular and hexagonal crystals. Selection of the optical parameters that are input to the inversion algorithm is based on a potential data set such as that gathered by two of the lidars on board the NASA DC-8 during the Stratospheric Aerosol and Gas Experiment 0 p (SAGE) Ozone Loss Validation experiment (SOLVE) campaign in winter 1999/2000: the Airborne Raman Ozone and Temperature Lidar (AROTEL) and the NASA Langley Differential Absorption Lidar (DIAL). The 0 microphysical retrieval algorithm has been applied to study how particle shape assumptions affect the inversion of lidar data measured in leewave PSCs. The model simulations show that under the assumption of spheroidal particle shapes, PSC surface and volume density are systematically smaller than the FDTD-based values by, respectively, approximately 10-30% and approximately 5-23%.

Reichardt, J.↗
NASA NTRS1991

Estimation of new production in the ocean by compound remote sensing

Compound remote sensing, a technique for estimating oceanic new production using remotely sensed data on ocean color and temperature, is discussed. This approach, which depends on parameterizations developed from ship observations as well as on satellite data, yields more representative estimates of the large-scale average new production than those calculated from ship data alone. The approach is illustated with data for the Georges Bank.

Sathyendranath, Shubha↗
NASA NTRS1999

Observations of Middle Atmosphere CO from the UARS ISAMS during the Early Northern Winter 1991/92

Structure and kinematics of carbon monoxide in the upper stratosphere and lower mesosphere (10-0.03 hPa) are studied for the early northern winter 1991/92 using the Upper Atmosphere Research Satellite Improved Stratospheric and Mesospheric Sounder (ISAMS) measurements. The study is aided by data from a 6-week parameterized-chemistry run of the Goddard Space Flight Center 3D Chemistry and Transport Model (CTM), initialized on 8 December 1991. Generally, CO mixing ratios increase with height due to the increasing source contribution from CO, photolysis. In the tropical upper stratosphere. however, a local maximum in CO mixing ratio occurs. A simple photochemical model is used to show that this feature results largely from methane oxidation. In the extratropics the photochemical lifetime of CO is long, and therefore its evolution is dictated by large-scale motion of air. evidenced by strong correlation with Ertel potential vorticity. This makes CO one of the few useful observable tracers at the stratopause level and above. Thus CO maps are used to study the synoptic evolution of the polar vortex in early January 1992. Modified Lagrangian mean mixing diagnostics are applied to ISAMS and CTM data to examine the strength of the mixing barrier at the polar vortex edge. It is demonstrated that planetary wave activity weakens the barrier. promoting vortex erosion. The vortex erosion first appears in the lower mesosphere and subsequently descends through the upper stratosphere. and is attributed to effects of planetary wave dissipation. Agreement between ISAMS and CTM is good in the horizontal distribution of CO throughout the examined period, but vertical CO gradients in the CTM weaken with time relative to the ISAMS observations.

Allen, D. R.↗
NASA NTRS1999

Tail Lobe Revisited: Magnetic Field Modeling Based on Plasma Data

Plasma data from the ISEE-1 and -2 spacecraft during 1977-1980 have been used to determine the distribution of data points in the magnetotail in the range of distances -20 < XGSM < --15, i.e. which of the records that were located in the current sheet, in the tail lobe, in the magnetosheath and in the boundary layers respectively. The ISEE-1 and -2 magnetic field data for the records in the tail lobe were then used to model the tail lobe magnetic field dependence on the solar wind dynamic pressure, on the Interplanetary Magnetic Field (IMF) and on the Dst index. The tail lobe magnetic field was assumed to be dependent on the square root of the dynamic pressure based on the balance between the total magnetic pressure in the tail lobes and the dynamic pressure of the solar wind. The IMF dependent terms, added to the pressure term, were sought in many different forms while the Dst dependence of the tail lobe magnetic field was assumed to be linear. The field shows a strong dependence on the square root of the dynamic pressure and the different IMF dependent terms all constitute a significant contribution to the total field. However, the dependence on the Dst index turned out to be very weak at those down-tail distances. The results of this study are intended to be used for parameterizing future versions of the data-based models of the global magnetospheric magnetic field.

Karlsson, S. B. P.↗
NASA NTRS2014

Application of Spectral Analysis Techniques in the Intercomparison of Aerosol Data: Part III. Using Combined PCA to Compare Spatiotemporal Variability of MODIS, MISR and OMI Aerosol Optical Depth

Satellite measurements of global aerosol properties are very useful in constraining aerosol parameterization in climate models. The reliability of different data sets in representing global and regional aerosol variability becomes an essential question. In this study, we present the results of a comparison using combined principal component analysis (CPCA), applied to monthly mean, mapped (Level 3) aerosol optical depth (AOD) product from Moderate Resolution Imaging Spectroradiometer (MODIS), Multiangle Imaging Spectroradiometer (MISR), and Ozone Monitoring Instrument (OMI). This technique effectively finds the common space-time variability in the multiple data sets by decomposing the combined AOD field. The results suggest that all of the sensors capture the globally important aerosol regimes, including dust, biomass burning, pollution, and mixed aerosol types. Nonetheless, differences are also noted. Specifically, compared with MISR and OMI, MODIS variability is significantly higher over South America, India, and the Sahel. MODIS deep blue AOD has a lower seasonal variability in North Africa, accompanied by a decreasing trend that is not found in either MISR or OMI AOD data. The narrow swath of MISR results in an underestimation of dust variability over the Taklamakan Desert. The MISR AOD data also exhibit overall lower variability in South America and the Sahel. OMI does not capture the Russian wild fire in 2010 nor the phase shift in biomass burning over East South America compared to Central South America, likely due to cloud contamination and the OMI row anomaly. OMI also indicates a much stronger (boreal) winter peak in South Africa compared with MODIS and MISR.

satellite observation↗
NASA NTRS2017

Atmospheric Form Drag Coefficients Over Arctic Sea Ice Using Remotely Sensed Ice Topography Data, Spring 2009-2015

Sea ice topography significantly impacts turbulent energy/momentum exchange, e.g., atmospheric (wind) drag, over Arctic sea ice. Unfortunately, observational estimates of this contribution to atmospheric drag variability are spatially and temporally limited. Here we present new estimates of the neutral atmospheric form drag coefficient over Arctic sea ice in early spring, using high-resolution Airborne Topographic Mapper elevation data from NASA's Operation IceBridge mission. We utilize a new three-dimensional ice topography data set and combine this with an existing parameterization scheme linking surface feature height and spacing to form drag. To be consistent with previous studies investigating form drag, we compare these results with those produced using a new linear profiling topography data set. The form drag coefficient from surface feature variability shows lower values [less than 0.5-1 × 10(exp. −3)] in the Beaufort/Chukchi Seas, compared with higher values [greater than 0.5-1 ×10(exp. −3)] in the more deformed ice regimes of the Central Arctic (north of Greenland and the Canadian Archipelago), which increase with coastline proximity. The results show moderate interannual variability, including a strong increase in the form drag coefficient from 2013 to 2014/2015 north of the Canadian Archipelago. The form drag coefficient estimates are extrapolated across the Arctic with Advanced Scatterometer satellite radar backscatter data, further highlighting the regional/interannual drag coefficient variability. Finally, we combine the results with existing parameterizations of form drag from floe edges (a function of ice concentration) and skin drag to produce, to our knowledge, the first pan-Arctic estimates of the total neutral atmospheric drag coefficient (in early spring) from 2009 to 2015.

sea ice↗
NASA NTRSDate not supplied

CERES Fast Longwave And SHortwave Radiative Flux (FLASHFlux): Research to Operation

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of how Earth’s energy flows are varying in time and space and how clouds and aerosols are affecting the Earth’s radiation budget. Nominally, CERES data products require months of validation and calibration before releasing a climate quality data. The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed as to provide key radiative flux data products within a week of observations for scientific, applied science research and educational usage. FLASHFlux achieves this by using simplified calibration process and optimized CERES data fusion production system, an operation meteorology product from Global Modeling and Assimilation Office(GMAO), and surface parameterized radiative flux models. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Aqua and Terra observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1ox1o gridded data that combines Aqua and Terra observations.The current operational Version 3C is being transitioned to Version4A. We compare the FLASHFlux Version4A fluxes using the specialized calibration to Version3C and to the climate quality CERES Edition4A TOA and surface fluxes over time for Terra and Aqua to determine the uncertainties of the calibration process. In addition, we also compare the impact of the fluxes by using the near real-time GMAO GEOS FP-IT instead of GMAO G5-CERES meteorology data.We also compare both SSF overpass products (for Terra and Aqua) and TISA radiative flux products to a set of surface measurement sites that are globally distributed and assess agreement.Lastly, we introduce the first CERES FF SSF data products from the CERES instrument on board NOAA-20.

P Sawaengphokhai↗
NASA NTRS2008

Absorption and Attenuation Coefficients Using the WET Labs ac-s in the Mid-Atlantic Bight: Field Measurements and Data Analysis

Ocean color algorithms are based on the parameterization of apparent optical properties as a function of inherent optical properties. WET Labs underwater absorption and attenuation meters (ac-9 and ac-s) measure both the spectral beam attenuation [c (lambda)] and absorption coefficient [a (lambda)]. The ac-s reports in a continuous range of 390-750 nm with a band pass of 4 nm, totaling approximately 83 distinct wavelengths, while the ac-9 reports at 9 wavelengths. We performed the ac-s field measurements at nine stations in the Mid-Atlantic Bight from water calibrations to data analysis. Onboard the ship, the ac-s was calibrated daily using Milli Q-water. Corrections for the in situ temperature and salinity effects on optical properties of water were applied. Corrections for incomplete recovery of the scattered light in the ac-s absorption tube were performed. The fine scale of spectral and vertical distributions of c (lambda) and a (lambda) were described from the ac-s. The significant relationships between a (674) and that of spectrophotometric analysis and chlorophyll a concentration of discrete water samples were observed.

Ohi, Nobuaki↗
NASA NTRSDate not supplied

Assessing the Uncertainty Impact of CERES Fast Longwave and SHortwave Radiative Flux (FLASHFlux) Level 3 Product With and Without Terra Observations

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of how Earth’s energy flows are varying in time and space and how clouds and aerosols are affecting the Earth’s radiation budget. Nominally, CERES data products require months of validation and calibration before releasing a climate quality data. The Fast Longwave And SHortwave radiative Flux (FLASHFlux) data product was developed to provide data for applied science research involving the renewable energy and agricultural sectors within a week of observation. FLASHFlux achieves this by using simplified calibration, an operational meteorological product from Global Monitoring and Assimilation Office (GMAO), and a surface parameterizations model. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra and NOAA-20 observations. 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) gridded data that combines NOAA-20 and Terra observations on a one-degree equal angle grid. FLASHFlux TISA data product interpolate on a diurnal model that assumes a satellite equilateral crossing time of 10:30 AM and 1:30 PM from Terra and Aqua, respectively. Aqua was replaced by NOAA-20 starting on September 2022. Terra is planned to be replace by the Satellite ClOud and Radiation Property retrieval System (SatCORPS) soon. We are currently using the Terra observations as it continues to drift. We assess the impact of FLASHFlux TISA data when Terra is removed. An uncertainty estimate of the Top-Of-Atmosphere (TOA) fluxes are given of FLASHFlux Version4A (before Terra drift) and Version4B (current), and Version4B (no Terra) in comparison to the CERES EBAF and SYN1deg. In addition, we compare FLASHFlux Version4B and Version4B (no Terra) surface radiative fluxes to ground base measurements to determine the impact of running without Terra data.

PC Sawaengphokhai↗
NASA NTRSDate not supplied

CERES Fast Longwave And SHortwave Radiative Flux (FLASHFlux): Research to Operation

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of how Earth’s energy flows are varying in time and space and how clouds and aerosols are affecting the Earth’s radiation budget. Nominally, CERES data products require months of validation and calibration before releasing a climate quality data. The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed as to provide key data for applied science research involving the renewable energy and agricultural sectors within a week of observations. FLASHFlux achieves this by using simplified calibration, an operation meteorology product from Global Modeling and Assimilation Office (GMAO), and its own surface parameterizations model. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Aqua and Terra observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1ox 1ogridded data that combines Aqua and Terra observations. We inter-compared of FLASHFlux Version4A calibration to the climate quality CERES Edition4A data product over time. In addition, we also inter-compared the impact of the fluxes by using the near real-time GMAO GEOS FP-IT instead of GMAO G5-CERES meteorology data. We also compare both SSF overpass and TISA radiative flux products to a set of surface measurement sites that are globally distributed and assess agreement.

P. C. Sawaengphokhai↗
NASA NTRS2012

Rapid Parameterization Schemes for Aircraft Shape Optimization

A rapid shape parameterization tool called PROTEUS is developed for aircraft shape optimization. This tool can be applied directly to any aircraft geometry that has been defined in PLOT3D format, with the restriction that each aircraft component must be defined by only one data block. PROTEUS has eight types of parameterization schemes: planform, wing surface, twist, body surface, body scaling, body camber line, shifting/scaling, and linear morphing. These parametric schemes can be applied to two types of components: wing-type surfaces (e.g., wing, canard, horizontal tail, vertical tail, and pylon) and body-type surfaces (e.g., fuselage, pod, and nacelle). These schemes permit the easy setup of commonly used shape modification methods, and each customized parametric scheme can be applied to the same type of component for any configuration. This paper explains the mathematics for these parametric schemes and uses two supersonic configurations to demonstrate the application of these schemes.

Li, Wu↗
NASA NTRS2022

Satellite Soil Moisture Data Assimilation Impacts on Modeling Weather Variables and Ozone in the Southeastern US – Part 2: Sensitivity to Dry-Deposition Parameterizations

Ozone (O3) dry deposition is a major O3 sink. As a follow-up study of Huang et al. (2021), we quantify the impact of satellite soil moisture (SM) on model representations of this process when different dry-deposition parameterizations are implemented, based on which the implications for interpreting O3 air pollution levels and assessing the O3 impacts on human and ecosystem health are provided. The SM data from NASA's Soil Moisture Active Passive mission are assimilated into the Noah-Multiparameterization (Noah-MP) land surface model within the NASA Land Information System framework, semicoupled with Weather Research and Forecasting model with online Chemistry (WRF-Chem) regional-scale simulations covering the southeastern US. Major changes in the modeling system used include enabling the dynamic vegetation option, adding the irrigation process, and updating the scheme for the surface exchange coefficient. Two dry-deposition schemes are implemented, i.e., the Wesely scheme and a “dynamic” scheme, in the latter of which dry-deposition parameterization is coupled with photosynthesis and vegetation dynamics. It is demonstrated that, when the dynamic scheme is applied, the simulated O3 dry-deposition velocities vd and their stomatal and cuticular portions, as well as the total O3 fluxes Ft, are larger overall; vd and Ft are 2–3 times more sensitive to the SM changes due to the data assimilation (DA). Further, through case studies at two forested sites with different soil types and hydrological regimes, we highlight that, applying the Community Land Model type of SM factor controlling stomatal resistance (i.e., β factor) scheme in replacement of the Noah-type β factor scheme reduced the v(d) sensitivity to SM changes by ∼75 % at one site, while it doubled this sensitivity at the other site. Referring to multiple evaluation datasets, which may be associated with variable extents of uncertainty, the model performance of vegetation, surface fluxes, weather, and surface O3 concentrations shows mixed responses to the DA, some of which display land cover dependency. Finally, using model-derived concentration- and flux-based policy-relevant O3 metrics as well as their matching exposure–response functions, the relative biomass/crop yield losses for several types of vegetation/crops are estimated to be within a wide range of 1 %–17 %. Their sensitivities to the model's dry-deposition scheme and the implementation of SM DA are discussed.

Min Huang↗
NASA NTRS1982

Development of improved hydrogen recombination in sealed nickel-cadmium aerospace cells

The identification and measurement of a hydrogen recombination mechanism in nickel-cadmium cells has made deep reconditioning on a battery basis safe and feasible. Deep reconditioning has been shown to improve performance and increase life of nickel-cadmium batteries in geosynchronous orbit applications. The hydrogen recombination mechanism and data supporting the mechanism are presented. Parameteric cell design experiments are described which have lead to the definition of nickel-cadmium cells capable of high rate overdischarge. Nickel-cadmium cells with optimum hydrogen recombination capability were successfully cycled for 7 seasons in simulation of the geosynchronous orbit regime at 75 percent depth-of-discharge with extensive midseason and end-of-season overdischarge at rates ranging from C/4 to C/20.

Ritterman, P. F.↗
NASA NTRS1983

Local effects of partly-cloudy skies on solar and emitted radiations

Atmospheric aerosol and turbidity measurements were analyzed and the results are presented. The correlation of global insolation with cloud cover fractions for the first complete year's data set was completed. A theoretical model was developed to parameterize the effects of local aerosols upon insolation received at the ground using satellite radiometric data and insolation measurements under clear sky conditions. A February data set, composed of one minute integrated global insolation and direct solar irradiances, cloud cover fractions, meteorological data from nearby weather stations, and GOES East satellite radiometric data was collected to test the model and used to calculate the effects of local aerosols.

Whitney, D. A.↗
NASA NTRS1983

Data processing techniques used with MST radars: A review

The data processing methods used in high power radar probing of the middle atmosphere are examined. The radar acts as a spatial filter on the small scale refractivity fluctuations in the medium. The characteristics of the received signals are related to the statistical properties of these fluctuations. A functional outline of the components of a radar system is given. Most computation intensive tasks are carried out by the processor. The processor computes a statistical function of the received signals, simultaneously for a large number of ranges. The slow fading of atmospheric signals is used to reduce the data input rate to the processor by coherent integration. The inherent range resolution of the radar experiments can be improved significant with the use of pseudonoise phase codes to modulate the transmitted pulses and a corresponding decoding operation on the received signals. Commutability of the decoding and coherent integration operations is used to obtain a significant reduction in computations. The limitations of the processors are outlined. At the next level of data reduction, the measured function is parameterized by a few spectral moments that can be related to physical processes in the medium. The problems encountered in estimating the spectral moments in the presence of strong ground clutter, external interference, and noise are discussed. The graphical and statistical analysis of the inferred parameters are outlined. The requirements for special purpose processors for MST radars are discussed.

Rastogi, P. K.↗