Search NASA⌕ Search

SEARCH · Search NASA

Results for “deep space communications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Navigation Using Deep-Space Optical Communication Systems

This work investigates the deep-space spacecraft navigation performance achievable from tracking data types obtained using optical communication systems. These optical navigation types include ranging between spacecraft and a station on Earth and astrometric measurements of angular position. Two mission scenarios are analyzed: an interplanetary cruise trajectory for a Mars lander (Mars 2020), and a science orbit for a Mars orbiter (MAVEN). Various data types are simulated using comprehensive measurement models, tracking schedules, and geometrical constraints. Sensitivity analyses are performed to assess the effect of various contributors to measurement accuracy and navigation performance. For both of the mission scenarios studied, the optical navigation types yield equivalent or improved performance as compared to traditional radiometric observables, though radiometric data types slightly outperform optical observables during tracking data gaps in the science orbit scenario.

McCandless, Sarah Elizabeth↗
NASA NTRS2008

An ATP System for Deep-Space Optical Communication

An acquisition, tracking, and pointing (ATP) system is proposed for aiming an optical-communications downlink laser beam from deep space. In providing for a direction reference, the concept exploits the mature technology of star trackers to eliminate the need for a costly and potentially hazardous laser beacon. The system would include one optical and two inertial sensors, each contributing primarily to a different portion of the frequency spectrum of the pointing signal: a star tracker (<10 Hz), a gyroscope (<50 Hz), and a precise fluid-rotor inertial angular-displacement sensor (sometimes called, simply, "angle sensor") for the frequency range >50 Hz. The outputs of these sensors would be combined in an iterative averaging process to obtain high-bandwidth, high-accuracy pointing knowledge. The accuracy of pointing knowledge obtainable by use of the system was estimated on the basis of an 8-cm-diameter telescope and known parameters of commercially available star trackers and inertial sensors: The single-axis pointing-knowledge error was found to be characterized by a standard deviation of 150 nanoradians - below the maximum value (between 200 and 300 nanoradians) likely to be tolerable in deep-space optical communications.

Lee, Shinhak↗
NASA NTRS1991

High power, high efficiency millimeter wavelength traveling wave tubes for high rate communications from deep space

The high-power transmitters needed for high data rate communications from deep space will require a new class of compact, high efficiency traveling wave tubes (TWT's). Many of the recent TWT developments in the microwave frequency range are generically applicable to mm wave devices, in particular much of the technology of computer aided design, cathodes, and multistage depressed collectors. However, because TWT dimensions scale approximately with wavelength, mm wave devices will be physically much smaller with inherently more stringent fabrication tolerances and sensitivity to thermal dissipation.

Dayton, James A., Jr.↗
NASA NTRS2020

Investigation Of Prandtl-Ishlinskii Hysteresis Compensation for Deep Space Optical Communications Pointing Control

This paper studies the simulated performance of the Deep Space Optical Communication (DSOC) laser downlink pointing control system that has a pointing requirement at the sub-microradian scale. To achieve the required pointing precision, the DSOC Flight Laser Transceiver (FLT) point-ahead mirror (PAM) employs piezoelectric actuators, which are widely used in precision applications due to their high motion resolution, rapid response, and high output forces. However, a piezoelectric actuator's performance is often limited by nonlinearities in their response, most significantly hysteresis. To study the effect of hysteresis on our simulated pointing performance, an invertible hysteresis model is developed using the Classical Prantdl-Ishlinskii (CPI) method. The simulation includes models of DSOC hardware and electronic system components based on key parameters (bias, frequency response, noise), with the hysteresis modeled in the PAM piezo actuator dynamics. A Proportional-Integral controller provides feedback with measurements from two potential sources: strain gauge sensors or a photon-counting camera. To compensate for hysteresis behavior, a feedforward inverse CPI hysteresis model is implemented in the control system. Two CPI models are built using different sampling methods (uniform sampling and cosine spacing) and controller performance is compared. For the maximum command range of ±400 μrad at 1 mHz, results show that the feedforward combined with feedback control reduces output tracking error by 50% or 58% (to 0.20 or 0.38 μrad) compared to feedback control alone (from 0.40 or 0.90 μrad), corresponding to the uniform-sampled and cosine-sampled CPI models, respectively.

Marinello, Lindsey A.↗
NASA NTRS2018

Toward a NASA Deep Space Optical Communications System

As discussed at SpaceOps in 2016, we expect the data rates from deep space missions to increase approximately one order of magnitude per decade for the next 50 years. The first order of magnitude improvement will come from existing plans for radio frequency (RF) communications including enhancements to both spacecraft and Deep Space Network (DSN) facilities. The next two orders of magnitude are predicted to come from the introduction of deep space optical communications. Studies indicate that optical receive apertures of between 8m12m are desired. The large cost of dedicated receive telescopes makes this method unrealistic – at least in the near-term. The cost of large optical ground terminals is driven primarily by the cost of the optics and by the cost of a stable structure for the telescope. We propose a novel hybrid design in which existing DSN 34m beam waveguide (BWG) radio antennas can be modified to include an 8m equivalent optical primary. By utilizing a low-cost segmented spherical mirror optical design, pioneered by the optical astronomical community, and by exploiting the already existing extremely stable large radio aperture structures in the DSN, we can minimize both of these cost drivers for implementing large optical communications ground terminals. Two collocated hybrid RF/optical antennas could be arrayed to synthesize the performance of an 11.3m receive aperture to support more capable or more distant space missions or used separately to communicate with two optical spacecraft simultaneously. NASA is in the midst of building six new 34m BWG antennas in the DSN. The final two are planned to be built at the DSN Goldstone, California and Canberra complexes. We are now investigating building these last two antennas as RF/optical hybrids. By delaying their operational dates by two years, we would be able to add the 8m optical receive capability for these two antennas while fitting within existing budgetary constraints. This paper describes the hybrid antenna design, the technical challenges being addressed, and plan for using this concept, together with ongoing work on optical flight terminals, to infuse operation optical communications into deep space missions.

Cornwell, Donald M.↗
NASA NTRS1993

Recent Progress in Deep Space Optical Communications

Progress in the NASA-funded optical communications program at the Jet Propulsion Laboratory (JPL) is decribed. This decription includes a system-level breadboard for an optical communications flight package, the planning for the Earth-reception facilities, and the results of a recent optical communications experiment to deep space with the Galileo spacecraft.

Voyager↗
NASA NTRS1989

Estimation and tracking for deep-space optical communications

The importance of pointing and tracking is demonstrated with current deep-space optical communications system concepts. Maximum-likelihood (ML), minimum square counting-error (MSCE), and maximum product (MP) estimation algorithms (or decision rules) are derived to estimate the location of the receiving station to subpixel resolution. Comparisons of the above algorithms are made, via Monte Carlo computer simulation, in terms of estimator's bias and variance. Optical communication link analyses are made for a typical earth-Mars scenario, to gain engineering insights. It is observed that both the ML rule and the MSCE rule perform better than the MP rule.

Win, Moe Zaw↗
NASA NTRS2016

Deep Space Optical Communications

A number of laser communication link demonstrations from near Earth distances extending out to lunar ranges have been remarkably successful, demonstrating the augmented channel capacity that is accessible with the use of lasers for communications. The next hurdle on the path to extending laser communication and its benefits throughout the solar system and beyond is to demonstrate deep-space laser communication links. In this paper, concepts and technology development being advanced at JPL in order to enable deep-space link demonstrations to ranges of approximately 3 AU in the next decade, will be discussed. Considerations for ranges extending farther will also be discussed briefly. The potential for light science (the optical equivalent of radio science) with the advancement of deep-space laser communications will also be touched upon.

Biswas, Abhijit↗
NASA NTRS2004

Architectural Options for a Future Deep Space Optical Communications Network

This paper provides an overview of different options at Earth to provide Deep Space optical communication services. It is based mainly on work done for the Mars Laser Communications Demonstration (MLCD) Project, a joint project between NASA's Goddard Space Flight Center (GSFC), the Jet Propulsion Laboratory, California Institute of Technology (JPL), and the Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL). It also reports preliminary conclusions from the Tracking and Data Relay Satellite System Continuation Study at GSFC. A lasercom flight terminal will be flown on the Mars Telecommunications Orbiter (MTO) to be launched by NASA in 2009, and will be the first high rate deep space demonstration of this revolutionary technology.

Edwards, B. L.↗
NASA NTRS2006

Implementation of a Coded Modulation for Deep Space Optical Communications

We present a field programmable gate array code (FPGA) implementation of a turbo-like decoder for a serially concatenated pulse-position modulation (SCPPM) code. NASA a developed this coded modulation scheme for deep space communications from Mars. Under a nominal mission condition, the decoder complexity by iteratively decoding the modulation and SCPPM coded system can operate within a one dB signal energy gap from capacity. The structure of SCPPM makes direct application of the conventional turbo decoding algorithm very inefficient. Here, we describe techniques to increase the throughput and performance of a hardware SCPPM decoder. using our optimizations, we demonstrate a 6 mega-bits per second (Mbps) decoder realization on a single FPGA. Extension toa higher data rate decoder using multiple FPGAs is readily achievable. Similar codes designed for the optical channel can benefit from our optimization techniques.

modulation↗
NASA NTRS2022

Qualification and Performance of a High-Efficiency Laser Transmitter for Deep-Space Optical Communications

A high-power Laser Transmitter Assembly (LTA) was developed to support the Deep Space Optical Communications (DSOC) technology demonstration being developed by the Jet Propulsion Laboratory. NASA’s Psyche Mission plans to host the DSOC flight subsystem for testing space-to-ground high-bandwidth laser communications en route to the 16 Psyche asteroid. We review the design, performance, and qualification of the LTA Engineering Model and Flight Model (EM and FM) delivered to JPL. The LTA uses a master-oscillator power amplifier (MOPA) design and delivers up to 4.5 W at 1550 nm, with a highly efficient, cladding-pumped, polarization-maintaining erbium-ytterbium fiber amplifier. The master oscillator generates a range of pulse widths and repetition rates to support modulation formats from 16- to 128-PPM for optical data transmission at >100 Mbps. The LTA was designed for high reliability and radiation hardness, and includes redundant signal and pumping paths to reduce single points of failure, hardware interlocks to ensure safe operation and protection against damage, closed-loop control of optical power, and detailed health and status via telemetry. The LTA EM and FM were subjected to unit-appropriate space qualification testing. We describe the performance testing of the EM and FM, for the characterization of key metrics such as wavelength stability, signal linewidth, optical pulse width, jitter, and extinction ratio, and polarization extinction ratio. The management of optical nonlinearities (self-phase modulation, Brillouin scattering, or pulse-to-pulse energy variation), which could result in an optical link penalty or damage to the LTA, is also detailed, and factors affecting the power efficiency are discussed.

Jaques, J.↗
NASA NTRS2005

Optimizing Parameters for Deep-Space Optical Communication

A paper discusses the optimization of the parameters of a high-rate, deep-space optical communication link that utilizes pulse-position modulation (PPM) and an error-correcting code (ECC). The parameters in question include the PPM order (number of pulse time slots in one symbol period), the ECC rate, and the uncoded symbol error rate. In simple terms, the optimization problem is to choose the combination of these parameters that maximizes the throughput data rate at a given bit-error-rate (BER), subject to several constraints, including limits on the average and peak power and possibly a limit on the uncoded symbol error rate. This is a complex, multidimensional optimization problem, the solution of which involves computation of channel capacities for various combinations of the parameters. The paper presents extensive theoretical analyses and numerical predictions that elucidate the many facets of the optimization problem. It shows how a nearly optimum solution can be obtained by choosing the optimum PPM order for the desired number of bits per slot and concatenating the PPM mapping with an error-correction code so that the decoded bits satisfy some BER threshold.

Moison, Bruce↗
NASA NTRS1990

A Plan for the Development and Demonstration of Optical Communications for Deep Space

In this article, an overall plan for the development and demonstration of optical communications for deep-space applications is presented. The current state of the technology for optical communications is presented. Then, the development and demonstration plan is presented in two parts: the overall major systems activities, followed by the generic technology developments that will enable them. The plan covers the path from laboratory subsystems demonstrations out to a full-scale flight experiment system for the proposed Mars Communications Relay Orbiter mission.

Lesh, J. R.↗
NASA NTRS2005

Earth-Image Tracking in the IR for Deep Space Optical Communications

Sub-microradian level laser beam pointing to an Earth-based receiver is required for deep space optical communications. This requires a beacon emanated from Earth towards the spacecraft. The beacon could be a laser or reflected sunlight from Earth. Earth image tracking in the visible is hampered by significant albedo variations and/or crescent Earth image yielding large central errors. Here, we report results of Earth-image tracking in the infrared (8 to 13 micron) region of the spectrum with the aim of substantially alleviating the two challenges mentioned earlier.

earth image tracking↗
NASA NTRS1975

Implementation of the 64-meter-diameter Antennas at the Deep Space Stations in Australia and Spain

The management and construction aspects of the Overseas 64-m Antenna Project in which two 64-m antennas were constructed at the Tidbinbilla Deep Space Communications Complex in Australia, and at the Madrid Deep Space Communications Complex in Spain are described. With the completion of these antennas the Deep Space Network is equipped with three 64-m antennas spaced around the world to maintain continuous coverage of spacecraft operations. These antennas provide approximately a 7-db gain over the capabilities of the existing 26-m antenna nets. The report outlines the project organization and management, resource utilization, fabrication, quality assurance, and construction methods by which the project was successfully completed. Major problems and their solutions are described as well as recommendations for future projects.

Bartos, K. P.↗
NASA NTRS1991

GOPEX - A deep-space optical communications demonstration with the Galileo spacecraft

The Galileo Optical communications from an Earth-based Xmtr (GOPEX) demonstration is designed to exhibit deep-space optical communications using the Galileo spacecraft. The optical transmitter consists of a Nd:YAG laser coupled to a 24-in. telescope at the Table Mountain Observatory (TMO), and the receiver is the Solid-State Imaging camera on board Galileo. The objectives of the demonstration are to understand the issues involved in blind-pointing to a spacecraft in deep space, and to assess the quality of the optical uplink by comparing the experimental results with theoretical predictions. The demonstration is proposed for December 1992 during the second earth-flyby period of Galileo's trajectory.

Wilson, Keith E.↗