Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SiOC coatings on yttria stabilized zirconia microspheres using a fluidized bed coating process

In this study, defect-free SiOC coatings were prepared on yttria stabilized zirconia (YSZ) microspheres by a fluidized bed coating process. Effects of the rheological properties of the coating solution on the coating process were elucidated. An impact regime diagram was constructed, which demonstrated that the coating mechanisms were collision/impact. During the fluidized bed coating, longer spouted time resulted in wider dispersion, longer residence time, and more circulatory motion of particles; the fluid distributed more uniformly throughout the column, as demonstrated in our Multiphase Flow with Interface eXchange (MFiX) simulations. Two-step pyrolysis in Ar achieved complete coating layers, which were comprised of SiOC, SiO 2 , SiC, and graphite. The two stage mass loss during the pyrolysis corresponded to simultaneous reactions due to depolymerization and hydrocarbon loss from 400 to 600°C. Carbon cluster size in the pyrolyzed samples was calculated to be 25 ± 2 Å. In conclusion, this work provides a new method for producing SiOC coatings on micron spheres, with nuclear TRISO fuel particles as the application.

42 ENGINEERING↗
NASA NTRS1983

Elastohydrodynamic contacts. Effects of dents and grooves on traction and local film thickness

Traction and film thickness were simultaneously measured under sliding elastohydrodynamic (EHD) conditions. The influence of surface topography was investigated by using simulated surfaces produced by depressing dents and grooves in highly polished steel balls. Significant changes in traction occurred depending on the orientation of the surface defects and their location with respect to the contact region. The results can be explained in terms of changes in overall film thickness and redistribution of pressure within the contact region due to micro-EHD effects. It can be concluded that the traction capability of mechanical components operating in thin film lubrication can be enhanced particularly by surface topographical orientation perpendicular to the surface motion. Associated with the higher traction are increases in local shear stress and normal stress as well as an increase in temperature at asperity sites. It is postulated that the local surface topography can become involved in run in or failure initiation even without actual asperity contact.

Wedeven, L. D.↗
DOE OSTI2020

In-Situ Visualization of Long-Range Defect Interactions at the Edge of Melting

Connecting a bulk material’s microscopic defects to its macroscopic properties is an age-old problem in materials science. Long-range interactions between dislocations (line defects) are known to play a key role in how materials deform or melt, but we lack the tools to connect these dynamics to the macroscopic properties. We introduce time-resolved dark-field X-ray microscopy to directly visualize how dislocations move and interact over hundreds of micrometers, deep inside bulk aluminum. With real-time movies, we reveal the thermally activated motion and interactions of dislocations that comprise a boundary, and show how weakened binding forces inhomogeneously destabilize the structure at 99% of the melting temperature. Connecting dynamics of the microstructure to its stability, we provide important opportunities to guide and validate multiscale models that are yet untested.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Helium Incorporation into Scandium Fluoride, a Model Negative Thermal Expansion Material

Scandium trifluoride is a model negative thermal expansion (NTE) material. Its simple structure can be described as an A-site vacant perovskite, and it shows isotropic NTE over a very wide temperature range (up to ~1100 K), due to transverse vibrational motion of the fluoride. Like many framework NTE materials, it undergoes a phase transition at low pressures, adopting a rhombohedral (R3̅c) structure at >0.7 GPa and 300 K in commonly used nonpenetrating pressure media, such as silicone oil. High pressure X-ray diffraction data and gas uptake/release measurements indicate that, on compression in helium above ~200 K, helium is inserted into ScF 3 to form the defect perovskite He x ScF 3 . The incorporation of helium stiffens the structure and changes its phase behavior. At room temperature, complete filling of the structure with helium does not occur until >1.5 GPa. On compression, a cubic perovskite structure is maintained until ~5 GPa. As the pressure was increased to ~9.5 GPa, a further transition occurred at ~7 GPa. The first transition at ~5 GPa is likely to a tetragonal (P4/mbm) perovskite, but the detailed structure of the perovskite phase formed on compression above ~7 GPa is unclear. Cooling down from 300 to 100 K in helium at ~0.4 GPa leads to an approximate composition of He 0.1 ScF 3 . High pressure neutron diffraction measurements, in the temperature range 15–150 K show that the incorporation of helium increases the pressure at which the cubic (Pm3̅m) to rhombohedral (R3̅c) putative quantum structural phase transition occurs from close to 0 GPa to ~0.2 GPa at 0 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Scanning Kelvin Probe Microscopy Reveals That Ion Motion Varies with Dimensionality in 2D Halide Perovskites

We study ion migration in 2D lead halide perovskites of varying dimensionality using scanning Kelvin probe microscopy (SKPM). We perform potentiometry on micrometer-scale lateral junctions in the absence of injected charge, and we compare how ion motion varies between prototypical two-dimensional n-butylammonium lead iodide perovskites (BA 2 PbI 4 , n = 1), and methylammonium-incorporated quasi-2D perovskites (BA 2 MA 3 Pb 4 I 13 , ~ < n > = 4) under the effects of illumination and temperature. We attribute the observed slow dynamics to relaxation of the bias-induced ionic charge distributions at different temperatures, and we extract the activation energies associated with the ionic motion in each case. Lastly, we propose an explanation for these phenomena by hypothesizing that ion motion in purely-2D BA 2 PbI 4 perovskite films is dominated by paired halide and halide vacancy, whereas for quasi-2D BA 2 MA 3 Pb 4 I 13 perovskites, the ion motion is a combination of both halide and methylammonium (vacancy) migration. These data show that dimensionality in these systems plays a critical role in ion dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spatiotemporal control of liquid crystal structure and dynamics through activity patterning

Active materials are capable of converting free energy into mechanical work to produce autonomous motion, and exhibit striking collective dynamics that biology relies on for essential functions. Controlling those dynamics and transport in synthetic systems has been particularly challenging. Here, we introduce the concept of spatially structured activity as a means of controlling and manipulating transport in active nematic liquid crystals consisting of actin filaments and light-sensitive myosin motors. In this work, simulations and experiments are used to demonstrate that topological defects can be generated at will and then constrained to move along specified trajectories by inducing local stresses in an otherwise passive material. These results provide a foundation for the design of autonomous and reconfigurable microfluidic systems where transport is controlled by modulating activity with light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reversible motions and disordered structure of soft particles in amorphous solids

In amorphous solids, soft vibrational modes derived from normal mode analysis can be utilized to identify the soft particles that are prone to irreversible rearrangements. However, the normal mode analysis approach cannot explain why the spatial distributions of clustered soft particles do not change over time. We define a softness parameter based on the vibrational density of states calculated directly from molecular dynamics simulations with both the harmonic vibrations and anharmonic relaxations being properly captured at finite temperatures. This parameter spontaneously correlates with the real space atomic motions and the dynamics heterogeneity. Using the softness parameter, we show that the softest particles are confined within rigid cages. These particles keep rearranging reversibly without long-range diffusion. The moderately soft particles rearrange irreversibly, and the hard particles mainly participate in vibrations without rearrangement. Here, we also show that the soft particles form locally disordered structures, while the hard particles present strong ordering. These findings confirm the defective nature of soft particles, and provide insights on the nature of softness as the ability to rearrange, but not necessarily irreversibly.

36 MATERIALS SCIENCE↗
NASA NTRS2018

Optimization of Elastodynamic Finite Integration Technique on Intel Xeon Phi Knights Landing Processors

This work describes the development and optimization of an implementation of an isotropic elastodynamic finite integration technique (EFIT) code for parallelized computation on Intel Knights Landing (KNL) hardware. EFIT is a numerical approach resulting in standard staggered-grid finite difference equations for the elastodynamic equations of motion to simulate bulk waves is solids. The computationally efficient simulation of elastodynamic wave propagation and interactions in aerospace materials is of high-interest in the fields of nondestructive evaluation (NDE) and structural health monitoring (SHM). Ultrasonic inspection uses an ultrasonic signal, generated at the surface of the material/structure via use of a piezoelectric transducer, to propagate sound waves into the material where it interacts with any existing defects, as well as with structural boundaries and any material inhomogeneity. Reflections from defects and boundaries are then measured by a transducer. Realistic ultrasound simulation tools can significantly aid the development and optimization of inspection techniques and can assist in the interpretation of experimental data. The optimization of an elastodynamics simulation code for the KNL Many Integrated Core processor was performed. The optimization focused on data locality and vectorization. Results show that tiling of the data to exploit the cache behavior and allow for significant utilization of the KNL hardware. The MPI implementation allows for a scalable implementation enabling large problems to be simulated. The model results were validated against theoretical dispersion curves to within 2% of the group velocity, and within 0.5% of the phase velocity of the A0 mode. Aggressive use of tiling, threading, and vectorization techniques allowed for dramatically improved time to solution.

William C. Schneck↗
NASA NTRS1991

Analysis of foil bearings for high speed operation in cryogenic applications

The general objective of this project is to develop analysis tools which are required for the design of foil bearings to be used in cryogenic applications. During the second year of this project, a general analysis approach and code for journal bearings operating under steady state conditions will be completed. This will be followed by the initiation of an investigation into transient behavior of foil bearings to determine their performance in rotor systems. Foil bearings have been proposed as an alternative to rolling element bearings for use in cryogenic turbopumps in liquid propellant rocket engines. This type of bearing offers several advantages over rolling element bearings since they would use the cryogenic pump fluid for a lubricant and have structural flexibility. These bearings have the potential of high reliability and long life. The bearing surface is constructed of a 'foil' which resists deflection by a combination of bending, membrane, and elastic foundation effects. The relative motion between the rotating shaft and the foil causes pressure in the fluid film to develop. This pressure deflects the the foil surface away from the shaft. Once a full fluid film is established between the foil and the rotor shaft, contact no longer takes place and there is no subsequent wear of the surfaces. The flexible foil structure of the bearing allows it to compensate for minor tolerance and manufacturing defects. This same flexibility also has a significant effect on the dynamic performance of the rotor-bearing system.

Carpino, Marc↗
DOE OSTI2026

Lithium–Divertor Interactions and Helium/Hydrogen Trapping in Lithiated Metals (Final Technical Report)

The goal of this project was to develop a fundamental understanding of helium and hydrogen behavior in lithium, both in bulk and at interfaces with tungsten, in order to inform the design of lithium based plasma facing components for fusion devices. Over the course of the award, the project produced the first comprehensive, peer reviewed dataset describing helium energetics, migration behaviors, and defect interactions in lithium. The research demonstrated that helium behaves in ways not previously observed in any other body centered cubic (BCC) metal: its interstitial configurations are more stable than substitutional ones, and its migration barriers are extraordinarily low, in some cases more than an order of magnitude below those in tungsten or iron. These discoveries reveal that helium in lithium diffuses so rapidly that its transport may be dominated by translational motion rather than the vibrationally activated mechanisms that underpin conventional solid state diffusion. This work lays a scientific foundation for understanding gas retention, bubble formation, and wall evolution in lithium based fusion environments and provides new computational tools, most notably a newly developed Li–He interatomic potential, for advancing future modeling efforts.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Optical pattern recognition; Proceedings of the Meeting, Los Angeles, CA, Jan. 17, 18, 1989

Papers on optical pattern recognition are presented, covering topics such as the estimation of satellite pose and motion parameters using a neural net tracker, associative memory, optical implmentation of programmable neural networks, optoelectronic neural networks, dynamic autoassociative neural memory, heteroassociative memory, bilinear pattern recognition processors, optical processing of optical correlation plane data, and a synthetic discriminant function-based nonlinear optical correlator. Other topics include an interactive optical-digital image processor, geometric transformations for video compression and human teleoperator display, quasiconformal remapping for compensation of human visual field defects, hybrid vision for automated spacecraft landing, advanced symbolic and inference optical correlation filters, and a rotationally invariant holographic tracking system. Additional topics include the detection of rotational and scale-varying objects with a programmable joint transform correlator, a single spatial light modulator binary nonlinear optical correlator, optical joint transform correlation, linear phase coefficient composite filters, and binary phase-only filters.

Liu, Hua-Kuang↗
NASA NTRS1985

Glass Research

Research efforts span three general areas of glass science: glass refining, gel-derived glasses, and nucleation and crystallization of glasses. Gas bubbles which are present in a glass product are defects which may render the glass totally useless for the end application. For example, optical glasses, laser host glasses, and a variety of other specialty glasses must be prepared virtually defect free to be employable. Since a major mechanism of bubble removal, buoyant rise, is virtually inoperative in microgravity, glass fining will be especially difficult in space. On the other hand, the suppression of buoyant rise and the ability to perform containerless melting experiments in space allows the opportunity to carry out several unique bubble experiments in space. Gas bubble dissolution studies may be performed at elevated temperatures for large bubbles with negligible bubble motion. Also, bubble nucleation studies may be performed without the disturbing feature of heterogeneous bubble nucleation at the platinum walls. Ground based research efforts are being performed in support of these potential flight experiments.

Weinberg, M. C.↗
DOE OSTI2026

A continuous symmetry breaking measure for finite clusters using Jensen-Shannon divergence

A quantitative measure of symmetry breaking is introduced that allows the quantification of which symmetries are most strongly broken due to the introduction of some kind of defect in a perfect structure. The method uses a statistical approach based on the Jensen-Shannon divergence. The measure is calculated by comparing the transformed atomic density function with its original. Software code is presented that carries the calculations out numerically using Monte Carlo methods. The behavior of this symmetry breaking measure is tested for various cases including finite size crystallites (where the surfaces break the crystallographic symmetry), atomic displacements from high symmetry positions, and collective motions of atoms due to rotations of rigid octahedra. Finally, the approach provides a powerful tool for assessing local symmetry breaking and offers new insights that can help researchers understand how different structural distortions affect different symmetry operations.

atomic & molecular structure↗
NASA NTRS1992

Turbulent fluid motion IV-averages, Reynolds decomposition, and the closure problem

Ensemble, time, and space averages as applied to turbulent quantities are discussed, and pertinent properties of the averages are obtained. Those properties, together with Reynolds decomposition, are used to derive the averaged equations of motion and the one- and two-point moment or correlation equations. The terms in the various equations are interpreted. The closure problem of the averaged equations is discussed, and possible closure schemes are considered. Those schemes usually require an input of supplemental information unless the averaged equations are closed by calculating their terms by a numerical solution of the original unaveraged equations. The law of the wall for velocities and temperatures, the velocity- and temperature-defect laws, and the logarithmic laws for velocities and temperatures are derived. Various notions of randomness and their relation to turbulence are considered in light of ergodic theory.

Deissler, Robert G.↗
DOE OSTI2020

Control of the Folding Dynamics of Self-Reconfiguring Magnetic Microbots Using Liquid Crystallinity

Reconfigurable microdevices are being explored in a range of contexts where their life-like abilities to move and change shape are important. While much work has been done to control the motion of these microdevices by engineering their geometry and composition, little is known about their dynamics in complex fluid environments with non-Newtonian rheology. Here in this paper, it is shown how the actuation dynamics of reconfigurable microdevices made by assembly of patchy magnetic microcubes, which are referred to as “microbots,” can be modulated by their interactions with the anisotropic viscoelastic environment of a liquid crystal (LC). The free energy arising from the elastic strain of LC and formation of topological defects around the microbots influences their folding dynamics, which can be tuned by tailoring both the far-field orientation of the LC and the local ordering of the LC at the microbot surfaces. These findings represent a first step toward establishing a general set of design rules to control the dynamics of microbots using complex anisotropic fluids.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nonlinear dynamics, avalanches, and noise for driven Wigner crystals

Here we consider the driven dynamics of Wigner crystals interacting with random disorder. Using numerical simulations, we find a rich variety of transport phenomena as a function of charge density, drive, and pinning strength. For weak pinning, the system forms a defect-free crystal that depins elastically. When the pinning is stronger, a pinned glass phase appears that depins into a filamentary flow state, transitions at higher drives into a disordered flow phase, and finally forms a moving smectic. Within the filamentary flow phase, the conduction curves can show switching dynamics as well as negative differential conductivity in which switching events cause some flow channels to be blocked. The velocity noise in the filamentary flow regime exhibits narrow band characteristics due to the one-dimensional nature of the motion, while the moving smectic has narrow band velocity noise with a washboard frequency. In the disordered flow state, the noise power reaches a peak value and the noise has a 1/$\mathcal{f}$ character. Our transport results are consistent with recent experimental transport studies in systems where Wigner crystal states are believed to be occurring. Below the conduction threshold, we find that avalanches with a power-law size distribution appear when there are sudden local rearrangements of charges from one pinned configuration to another.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Mitigating Band Tailing in Kesterite Solar Absorbers: Ab Initio Quantum Dynamics

Open-circuit voltage deficits are limiting factors in kesterite solar cells. Addressing this issue by suppressing band tailing and nonradiative charge recombination is essential for enhancing the performance. We employ ab initio nonadiabatic molecular dynamics to elucidate the origin of band tailing and charge losses and propose a mitigation strategy. The simulations show that Cu–Zn disorder, associated with antisite defect clusters [Cu Zn +Zn Cu ], is a significant source of band tailing in kesterites, as evidenced by the much larger Urbach energy in disordered than ordered kesterites. Cu–Zn disorder gives rise to new sulfur-centered coordination polyhedra, increases structural inhomogeneity, changes electrostatic potential at sulfur centers, and shifts the S(3p) orbital energy. Differences in the S(3p)/Cu(3d) and S(3p)/Sn(5s) hybridization strengths and the S(3p) orbital energy shift reduce the band gap by 0.37 eV. Furthermore, Cu–Zn disorder enhances vibrational motion of sulfur anions and surrounding cations, increasing band gap fluctuations by 15 meV. The stronger electron–phonon interactions reduce charge carrier lifetimes and limit the kesterite solar cell efficiency. Partial substitution of Zn with Cd facilitates structural ordering and significantly suppresses band tailing, particularly in disordered systems. The improvement can be attributed to the larger atomic radius and mass of Cd, which weakens bonding around the anion, suppresses S-related vibrations within the covalent tetrahedra, and reduces nonadiabatic coupling, thereby increasing charge carrier lifetimes. The reported results establish the key influence of cation disorder on band tailing and reduced charge carrier lifetimes in kesterites and highlight cation disorder engineering as a strategy to achieve high-efficiency kesterite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Active interlocking metasurfaces enabled by shape memory alloys

Interlocking metasurfaces (ILMs) are a newly developed joining technology that relies on arrays of interlocking features that transmit force and constrain motion between adjoining bodies in one or more directions. This study explores harnessing the shape memory effect (SME) in Nickel-Titanium shape memory alloys (NiTi SMAs) in structures fabricated using additive manufacturing (AM) to advance the development of active ILMs by creating unit cells that open or close at specific temperatures. The study encompasses designing and fabricating two distinct interlocking array configurations using near-equiatomic NiTi powder and the laser powder bed fusion (L-PBF) AM technique, following a previously developed AM process optimization framework to manufacture defect-free parts. To guide the design process, finite element analysis (FEA) was employed to predict strain values during engage-disengage cycles. The martensitic transformation characteristics of the ILMs were characterized. Thermomechanical testing revealed that the ILMs demonstrate high locking force once engaged, coupled with complete shape recovery and good cyclic stability. Digital image correlation (DIC) was also employed to validate the FEA predictions during the engage-disengage cycles. The results indicate that NiTi SMA-based ILMs can be designed and fabricated into complex shapes using L-PBF. By leveraging the SME, the functionality of an ILM can be improved upon. The combination of computational modeling, additive manufacturing, and thermomechanical and physical property characterization provides a framework for designing future ILMs out of active materials.

Additive manufacturing↗