Search NASA⌕ Search

SEARCH · Search NASA

Results for “deformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Determination of near-surface plastic deformation in sliding contacts

It is pointed out that substantial plastic deformation occurs on and near the contact surfaces, when two solid bodies slide against each other without lubrication. It has been found that this deformation plays an important role in the tribological behavior of the sliding contact. The present investigation has the objective to develop an analytical model to predict the near-surface plastic deformation resulting from a single pass of one metallic surface over another. A finite element viscoplasticity program was written relating velocities to forces in a two-dimensional domain. The program was employed in the study of plastic deformation during a single pass of a hardened tool steel slider over a copper rub specimen. It was found that essentially the only material set in motion by the slider was directly under the contact zone. The agreement between values obtained in the analysis and experimental data is reasonably good.

Kennedy, F. E., Jr.↗
NASA NTRS1986

Transpression as the main deformational event in an Archaean greenstone belt, northeastern Minnesota

Deformed and metamorphosed sedimentary and volcanic rocks of the Vermilion district constitute an Archean greenstone belt trending east-west between higher grade rocks of the Vermilion Granitic Complex to the north and the Giants Range batholith to the south. Metamorphic grade is low throughout, being lowest in the center of the belt (chlorite zone of the greenschist facies). All the measured strain, a cleavage or schistosity, and a mineral lineation in this belt are attributed to the main phase of deformation D sub 2 that followed an earlier nappe-forming event D sub 1, which left little evidence of penetrative fabric. Previous work assumed that the D sub 2 deformation resulted from north-south compression across the district. It is now believed that a significant component of this deformation resulted from dextral shear across the whole region. Thus the Vermilion fault, a late-state largely strike-slip structure that bounds the Vermilion district to the north, may simply be the latest, most brittle expression of a shear regime that was much more widespread in space and time. Features that are indicative of shear include ductile shear zones with sigmoidal foliation patterns, highly schistose zones with the development of shear bands, feldspar clasts or pyrite cubes with asymmetric pressure shadows, and the fact that the asymmetry of the F sub 2 folds is predominantly Z for at least 15 km south of the Vermilion fault.

Hudleston, P. J.↗
NASA NTRS1986

Plate motions and deformations from geologic and geodetic data

Research effort on behalf of the Crustal Dynamics Project focused on the development of methodologies suitable for the analysis of space-geodetic data sets for the estimation of crustal motions, in conjunction with results derived from land-based geodetic data, neo-tectonic studies, and other geophysical data. These methodologies were used to provide estimates of both global plate motions and intraplate deformation in the western U.S. Results from the satellite ranging experiment for the rate of change of the baseline length between San Diego and Quincy, California indicated that relative motion between the North American and Pacific plates over the course of the observing period during 1972 to 1982 were consistent with estimates calculated from geologic data averaged over the past few million years. This result, when combined with other kinematic constraints on western U.S. deformation derived from land-based geodesy, neo-tectonic studies, and other geophysical data, places limits on the possible extension of the Basin and Range province, and implies significant deformation is occurring west of the San Andreas fault. A new methodology was developed to analyze vector-position space-geodetic data to provide estimates of relative vector motions of the observing sites. The algorithm is suitable for the reduction of large, inhomogeneous data sets, and takes into account the full position covariances, errors due to poorly resolved Earth orientation parameters and vertical positions, and reduces baises due to inhomogeneous sampling of the data. This methodology was applied to the problem of estimating the rate-scaling parameter of a global plate tectonic model using satellite laser ranging observations over a five-year interval. The results indicate that the mean rate of global plate motions for that interval are consistent with those averaged over several million years, and are not consistent with quiescent or greatly accelerated plate motions. This methodology was also used to provide constraints on deformation in the western U.S. using very long baseline interferometry observations over a two-year period.

Jordan, T. H.↗
NASA NTRS1986

Viscoelastic deformation near active plate boundaries

Model deformations near the active plate boundaries of Western North America using space-based geodetic measurements as constraints are discussed. The first six months of this project were spent gaining familarity with space-based measurements, accessing the Crustal Dynamics Data Information Computer, and building time independent deformation models. The initial goal was to see how well the simplest elastic models can reproduce very long base interferometry (VLBI) baseline data. From the Crustal Dynamics Data Information Service, a total of 18 VLBI baselines are available which have been surveyed on four or more occasions. These data were fed into weighted and unweighted inversions to obtain baseline closure rates. Four of the better quality lines are illustrated. The deformation model assumes that the observed baseline rates result from a combination of rigid plate tectonic motions plus a component resulting from elastic strain build up due to a failure of the plate boundary to slip at the full plate tectonic rate. The elastic deformation resulting from the locked plate boundary is meant to portray interseismic strain accumulation. During and shortly after a large interplate earthquake, these strains are largely released, and points near the fault which were previously retarded suddenly catch up to the positions predicted by rigid plate models. Researchers judge the quality of fit by the sum squares of weighted residuals, termed total variance. The observed baseline closures have a total variance of 99 (cm/y)squared. When the RM2 velocities are assumed to model the data, the total variance increases to 154 (cm/y)squared.

Ward, S. N.↗
NASA NTRS1985

Earthquake deformation cycle in the Andean Back Arc, western Argentina

It is pointed out that the 1977 Caucete earthquake was an east-west compressive event which occurred at a depth of about 17 km in the Andean back arc approximately 450 km east of the Chile trench. The present study is primarily concerned with the mechanics of fault behavior prior to and after the 1977 earthquake, as evidenced by preseismic and postseismic vertical deformation. Simple fault models for each phase of deformation are presented. The models of preseismic slip, coseismic slip, and postseismic slip consist of uniform dislocations in an elastic half-space following the method of Chinnery (1961). The basically elastic models presented demonstrate that deformations in the vicinity of the 1977 Caucete, Argentina, earthquake are consistent with activity on some portion of the coseismic fault. This is evidence that these deformations are directly related to the processes of strain accumulation and release associated with the event.

Reilinger, R.↗
NASA NTRS1986

Extension of continental lithosphere - A model for two scales of basin and range deformation

The development of a model for deformation in an extending continental lithosphere that is stratified in density and strength is described. The lithosphere model demonstrates that the necking instabilities at two wavelengths originate due to a strong upper crust, a mantle layer, and a weak lower crust. It is observed that the dominant wavelengths of necking are controlled by layer thickness and the strength of the layers control the amplitude of the instabilities. The model is applied to the Basin and Range Province of the western U.S. where deformations in ranges and tile domains are detected. The relation between the Bouguer gravity anomaly and the deformations is studied. The data reveal that the horizontal scale of short wavelength necking correlates with the spacings of individual basins and ranges, and the longer wavelength corresponds to the width of tilt domains. The control of the Basin and Range deformation by two scales of extensional instability is proposed.

Zuber, M. T.↗
NASA NTRS1986

Strain accumulation and surface deformation along the San Andreas, California

Stressing and rupture of a locked zone adjacent to a creeping fault segment was studied with special reference to strength heterogeneity depthwise and along-strike. The resulting precursory temporal and spatial variations of surface strain rate profiles were compared to geodetic measurements on the San Andreas fault in central California. Crustal deformation in great California earthquake cycles was also studied with special reference to the temporal decay of strain rate observed since the 1957 and 1906 great earthquakes, and comtemporary surface strain rate and velocity profiles at several locations along the San Andreas. The effect of viscoelastic response in the deep aseismic shear zone on the surface deformation behavior was examined. Work was begun on a fundamental reformulation of the crustal deformation problem focusing on the crustal deformation process affected by deep aseismic slip as the slip zone progresses toward an instability and as deep seismic slip continues postseismically, the 3-D nature of the problem due to geometry and material heterogeneity, and the time-dependent source coming from the lithosphere/astenospheric coupling process.

Li, Victor C.↗
NASA NTRS1986

Plastic deformation - Its role in fatigue crack propagation

Recognizing the fact that the effective driving force Delta-K(eff) determines the fatigue crack propagation (FCP) rate and that the shear strain, which is considered to develop due to an occurrence of crack closure, primarily contributes to the plastic deformation, an effort is made here to elucidate the role of plastic deformation in FCP by developing a correlation between the Delta-K(eff) and the applied driving force (Delta-K) with shear strain as variable. The disparity between Delta(K)eff) and Delta-K, which apparently increases with shear strain level, persists at lower values of Delta-K. This suggests a strong influence of the degree of localized deformation on the FCP rates in the near threshold level. Hence, an improvement of FCP rates in the near threshold level should follow an effort that promotes the plastic deformation near the crack tip to a greater degree. This approach could explain the effect of the grain size, microstructure, environment, R-ratio and crack size on the near-threshold FCP rates.

Mazumdar, P. K.↗
NASA NTRS1987

Compression of oceanic lithosphere - An analysis of intraplate deformation in the Central Indian Basin

The development of intraplate structure in the Central Indian Basin is examined using models in which deformation is due to flexural buckling and the hydrodynamic growth of instabilities. Comparison of the models reveal that in a strong viscous lithosphere, deformation of the layer occurs by flexural folding at a wavelength which corresponds to the flexural buckling theory; in a lithosphere of intermediate strength, the layer deforms by folding characterized by thickening which localizes beneath topographic heights; and in a relatively weak lithosphere, the layer incurs an even greater amount of localized thickening and deforms in the symmetric or pinch-and-swell mode by inverse boudinage. It is noted that the models in which the layer folds either flexurally or with periodic thickening correspond with observed depth distribution of seismicity in the Central Indian Basin and with experimental rock rheological data.

Zuber, Maria T.↗
NASA NTRS1987

Interseismic deformation for normal fault earthquakes

Comparison between the coseismic vertical deformation associated with normal fault earthquakes and permanent deformation indicated by geologic structure indicates that large deformation must occur during the period between earthquakes. When sufficient geodetic and geologic information is available it is possible to estimate the spatial character of this interseismic deformation. A case in point is the 1983 Borah Peak, Idaho earthquake. This normal fault earthquake produced roughly 5 times as much basin subsidence as it did uplift of the adjacent mountain ranges. In contrast, geophysical and geological observations show that the basin is roughly as deep as the bounding range is high. A similar normal fault event in the Basin and Range, the 1959 Hebgen Lake earthquake, was also accompanied by substantially larger subsidence than uplift. In this case, postseismic geodetic measurements show broad regional uplift with a spatial pattern which is roughly consistent with that proposed for the Borah Peak event. Modeling suggests that postseismic viscoelastic relaxation and strain accumulation in an elastic lithosphere overlying a viscoelastic asthenosphere are possible physical mechanisms to generate interseismic uplift. These mechanisms may be the contemporary expression of those processes responsible for the high elevation of the Basin and Range Province.

Reilinger, Robert↗
NASA NTRS1989

Deformation modeling and constitutive modeling for anisotropic superalloys

A study of deformation mechanisms in the single crystal superalloy PWA 1480 was conducted. Monotonic and cyclic tests were conducted from 20 to 1093 C. Both (001) and near-(123) crystals were tested, at strain rates of 0.5 and 50 percent/minute. The deformation behavior could be grouped into two temperature regimes: low temperatures, below 760 C; and high temperatures, above 820 to 950 C depending on the strain rate. At low temperatures, the mechanical behavior was very anisotropic. An orientation dependent CRSS, a tension-compression asymmetry, and anisotropic strain hardening were all observed. The material was deformed by planar octahedral slip. The anisotropic properties were correlated with the ease of cube cross-slip, as well as the number of active slip systems. At high temperatures, the material was isotropic, and deformed by homogeneous gamma by-pass. It was found that the temperature dependence of the formation of superlattice-intrinsic stacking faults was responsible for the local minimum in the CRSS of this alloy at 400 C. It was proposed that the cube cross-slip process must be reversible. This was used to explain the reversible tension-compression asymmetry, and was used to study models of cross-slip. As a result, the cross-slip model proposed by Paidar, Pope and Vitek was found to be consistent with the proposed slip reversibility. The results were related to anisotropic viscoplastic constitutive models. The model proposed by Walter and Jordan was found to be capable of modeling all aspects of the material anisotropy. Temperature and strain rate boundaries for the model were proposed, and guidelines for numerical experiments were proposed.

Milligan, Walter W.↗
NASA NTRS1989

The interpretation of crustal dynamics data in terms of plate motions and regional deformation near plate boundaries

A particularly detailed set of observations in the vicinity of an intraplate, thrust earthquake (M 7.4) in Argentina, indicate a cyclic pattern of deformation very similar to that reported previously for interplate earthquakes. This deformation cycle, which may be characteristic of many seismically active areas, consists of: (1) steady strain accumulation, possibly punctuated by strain reversals; (2) coseismic strain release; (3) a period of continued strain release due to afterslip (persisting for perhaps a year or so); and (4) rapid postseismic strain accumulation which decreases exponentially and grades into steady strain accumulation. Deformation associated with three earthquakes in the U.S. (1940, M7.1 Imperial Valley California; 1964, M8.4 Alaska; 1959, M7.5 Hebgen Lake, Montana) are interpreted in light of this general earthquake cycle and are used to investigate the mechanics of strain release for these events. These examples indicate that large postseismic movements can occur for strike-slip, thrust, and normal fault events, and both viscoelastic relaxation and postseismic after-slip must be incorporated in models of earthquake related deformation. The mechanics of the strain release process revealed by these examples has implications for estimating earthquake repeat times from geodetic observations near active faults.

Solomon, Sean C.↗
NASA NTRS1988

Nonlinear modeling and estimation of slew induced structural deformations

A model of the nonlinear dynamics of a deformable maneuvering multibody system is described, whereby elastic deformation are modeled by restoring forces and dissipative forces at point mass appendages. This model is brought into bilinear form. Estimation of deformations occasioned by rapid slewing maneuvers is carried out by a filter based on a globally equivalent linear model of the bilinear dynamics, and is shown to be an improvement over the extended Kalman filter. To further alleviate the computational burden, the estimated deformation state is propagated between observations by a low dimensional operator spline interpolator of bilinear system Volterra series, which is easily implemented.

Dwyer, T. A. W., III↗
NASA NTRS1989

Strain accumulation and surface deformation along the San Andreas, California

The goal of this project remains to be the achievement of a better understanding of the regional and local deformation and crustal straining processes in western North America, particularly the effect of the San Andreas and nearby faults on the spatial and temporal crustal deformation behavior. Construction of theoretical models based on the mechanics of coupled elastic plate/viscoelastic foundation and large scale crack mechanics provide a rational basis for the interpretation of seismic and aseismic anomalies and expedite efforts in forecasting the stability of plate boundary deformations. In the present period, special focus is placed on the 3-D effect of irregular fault locked patches on the ground measured deformation fields. Specifically, use is made of a newly developed 3-D boundary element program to analyze the fault slip and vertical ground motion in the Parkfield area on the San Andreas.

Li, Victor C.↗
NASA NTRS1989

The coupling effects of kinematics and flexibility on the Lagrangian dynamic formulation of open chain deformable links

A nonlinear Lagrangian formulation for the spatial kinematic and dynamic analysis of open chain deformable links consisting of cylindrical joints that connect pairs of flexible links is developed. The special cases of revolute or prismatic joint can also be obtained from the kinematic equations. The kinematic equations are described using a 4x4 matrix method. The configuration of each deformable link in the open loop kinematic chain is identified using a coupled set of relative joint variables, constant geometric parameters, and elastic coordinates. The elastic coordinates define the link deformation with respect to a selected joint coordinate system that is consistent with the kinematic constraints on the boundary of the deformable link. These coordinates can be introduced using approximation techniques such as Rayleigh-Ritz method, finite element technique or any other desired approach. The large relative motion between two neighboring links are defined by a set of joint coordinates which describes the large relative translational and rotational motion between two neighboring joint coordinate systems. The origin of these coordinate systems are rigidly attached to the neighboring links at the joint definition points along the axis of motion.

Changizi, Koorosh↗
NASA NTRS1990

High-temperature deformation and microstructural analysis for Si3N4-Sc2O3

It was indicated that Si3N4 doped with Sc2O3 may exhibit high temperature mechanical properties superior to Si3N4 systems with various other oxide sintered additives. High temperature deformation of samples was studied by characterizing the microstructures before and after deformation. It was found that elements of the additive, such as Sc and O, exist in small amounts at very thin grain boundary layers and most of them stay in secondary phases at triple and multiple grain boundary junctions. These secondary phases are devitrified as crystalline Sc2Si2O7. Deformation of the samples was dominated by cavitational processes rather than movements of dislocations. Thus the excellent deformation resistance of the samples at high temperature can be attributed to the very small thickness of the grain boundary layers and the crystalline secondary phase.

Cheong, Deock-Soo↗
NASA NTRS1989

On reported occurrences of shock-deformed clasts in the volcanic ejecta from Toba caldera, Sumatra

Reports of shock-deformed phenocrysts from the Toba ignimbrite deposits, Sumatra, have prompted considerable debate over whether shock-deformation products are clear evidence of a meteorite impact origin for the K/T boundary deposits as well as terresrial 'cryptoexplosion' structures. Evidence presented in favor of volcanically induced shock at Toba includes kinked biotites and rare occurrences of single set of lamellae in quartz grains but rests most heavily upon occurrences of mosaic extinction patterns in plagioclase phenocrysts. The present analysis of several of the same Toba samples reveals that these mosaic patterns ae related to distinct compositional zoning and cannot be attributed to deformation of the crystal lattice that shock would produce. Additionally, in more than 200 quartz grains examined, no occurrences of microdeformation features or mosaic textures similar to those associated with known impact structures and the K/T boundary are detected. It is concluded that evidence of shock deformation in the Toba deposits has not been demonstrated.

Sharpton, V. L.↗
NASA NTRS1989

Deformation analysis of boron/aluminum specimens by moire interferometry

Whole-field surface deformations were measured for two slotted tension specimens from multiply laminates, one with 0 deg fiber orientation in the surface ply and the other with 45 deg orientation. Macromechanical and micromechanical details were revealed using high-sensitivity moire interferometry. Although global deformations of all plies were essentially equal, numerous random or anomalous features were observed. Local deformations of adjacent 0 deg and 45 deg plies were very different, both near the slot and remote from it, requiring large interlaminar shear strains for continuity. Shear strains were concentrated in the aluminum matrix. For 45 deg plies, a major portion of the deformation was by shear; large plastic slip of matrix occurred at random locations in 45 deg plies, wherein groups of fibers slipped relative to other groups. Shear strains in the interior, between adjacent fibers, were larger than the measured surface strains.

Post, Daniel↗