Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Features of plastic deformation and fracture of dispersion-strengthened V–Cr–Zr–W alloy depending on temperature of tension

Influence of tension temperature on features of plastic deformation and fracture of V–4.23Cr–1.69Zr–7.56W alloy was investigated by scanning and transmission electron microscopy. It is shown that temperature increase leads to activation of the recovery processes, which manifests in the coarsening of microstructure elements, reducing the dislocation density, relaxation of continuous misorientations.

36 MATERIALS SCIENCE↗

Positron annihilation study of vacancy-type defects in Al single crystal foils with the tweed structures across the surface

The vacancy-type defects in the aluminum single crystal foils after a series of the cyclic tensions were studied using positron annihilation. Two components were identified in the positron lifetime spectra associated with the annihilation of free positrons and positrons trapped by dislocations. With increasing number of cycles the dislocation density firstly increases and reaches a maximum value at N = 10 000 cycles but then it gradually decreases and at N = 70 000 cycles falls down to the level typical for the virgin samples. The direct evidence on the formation of a two-phase system “defective near-surface layer/base Al crystal” in aluminum foils at cyclic tension was obtained using a positron beam with the variable energy.

36 MATERIALS SCIENCE↗

Highly repeatable room temperature negative differential resistance in AlN/GaN resonant tunneling diodes grown by molecular beam epitaxy

AlN/GaN resonant tunneling diodes grown on low dislocation density semi-insulating bulk GaN substrates via plasma-assisted molecular-beam epitaxy are reported. The devices were fabricated using a six mask level, fully isolated process. Stable room temperature negative differential resistance (NDR) was observed across the entire sample. The NDR exhibited no hysteresis, background light sensitivity, or degradation of any kind after more than 1000 continuous up-and-down voltage sweeps. The sample exhibited a ∼90% yield of operational devices which routinely displayed an average peak current density of 2.7 kA/cm{sup 2} and a peak-to-valley current ratio of ≈1.15 across different sizes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct observation of dislocation structure evolution in SRF cavity niobium using electron channeling contrast imaging

Two major goals of superconducting radio frequency cavity research and development are achieving higher accelerating gradient and gaining the highest quality factor, a measure of efficiency. However, the consistent improvement of these performance metrics is restricted by many factors, one of which is microstructural defects, such as dislocation substructures within the material. In this work, dislocation evolution is compared in four samples extracted from a 2.8 mm thick large-grain niobium slice, with tensile axes chosen to generate specific dislocation structures during subsequent deformation. The four samples are (1) as-extracted, (2) extracted and annealed, (3) extracted and then deformed to 40% tensile strain, and (4) extracted, annealed at 800 °C 2 h, and then deformed to 40% strain. Electron channeling contrast imaging was performed on all samples to characterize initial dislocation density and dislocation structure evolution due to annealing and deformation, and related to the mechanical behavior observed in stress-strain curves. A fundamental understanding of dislocation evolution in niobium is necessary to develop computational models to simulate cavity forming, which could enable new processing methods for cavity fabrication to be identified that could lead to improved performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma-assisted molecular beam epitaxy and characterization of SnO{sub 2} (101) on r-plane sapphire

Plasma-assisted molecular beam epitaxy has been shown to be a viable and practical method for producing high quality tin oxide, SnO{sub 2}. Phase-pure epitaxial single crystalline SnO{sub 2} (101) thin films of 1 {mu}m in thickness were reproducibly grown on r-plane sapphire Al{sub 2}O{sub 3} (1012) substrates. The SnO{sub 2} epitaxy progressed in the Volmer-Weber growth mode. A minimum on-axis {omega}-scan full width at half maximum of 0.22 deg. for the SnO{sub 2} (101) peak was measured indicating relatively low film mosaic. An epitaxial relationship of [010]{sub SnO{sub 2}} parallel [1210]{sub sapphire} and [101]{sub SnO{sub 2}} parallel [1011]{sub sapphire} was determined between the film and substrate. A SnO{sub 2} film tilt of 1.3 deg. around the [010]{sub SnO{sub 2}} toward [0001]{sub sapphire} was measured. A dislocation density of 8x10{sup 9} cm{sup -2} was measured. Hall effect measurements quantified an unintentionally doped electron concentration for different samples in a range (0.3-3.0)x10{sup 17} cm{sup -3} with a corresponding electron mobility range of 20-100 cm{sup 2}/V s. The SnO{sub 2} growth behavior was determined to be in one of the two distinct growth regimes. An oxygen-rich regime was characterized by a linear increase in the film growth rate with increasing Sn flux; whereas, the films grown entirely in the Sn-rich regime showed a decrease in the growth rate with increased Sn flux.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of microwave irradiation on the resistance of Au-TiB{sub x}-Ge-Au-n-n{sup +}-n{sup ++}-GaAs(InP) ohmic contacts

Temperature dependences of the contact resistivity {rho}{sub c} of Au-TiB{sub x}-Ge-Au-n-n{sup +}-n{sup ++}(GaAs)-InP ohmic contacts before and after short-term (10 s) microwave treatment have been studied both experimentally and theoretically. It is shown that {rho}{sub c} can decrease after microwave treatment in the entire temperature range of {rho}{sub c} measurements (100-400 K). Good agreement between the theoretical and experimental {rho}{sub c}(T) curves is attained and interpreted on the assumption that the dislocation density in the semiconductor near-surface region is varied as a result of microwave radiation.

36 MATERIALS SCIENCE↗

Thermal Conductivity of AM Fabricated Stainless Steel 316L Part

Thermal properties are an integral part of many diverse engineering applications, and additive manufacturing (AM), particularly laser powder bed fusion (LPBF) is shown to affect thermal properties due to the laser processing parameters. For 316L stainless steel, there is little prior research to determine the effects of the process on thermal properties. In this work, the temperature gradient is shown to create uniform, chess board-like distributions of grains in the build direction. These zones create dislocations which were visualized with EBSD techniques. Processing parameters cause hierarchal grain size distribution, with localized concentrations of small grains and large grains. Thermomechanical stresses in the rapid solidification increases dislocation density during grain formation. Previous research shows a higher density of dislocations decreases local thermal conductivity. Local and bulk thermal conductivity are shown in this work to have statistically lowered values to an average of 10-12 W/m-K compared to 14 W/m-K for conventional 316L.

36 MATERIALS SCIENCE↗

Progress in Near-Equilibrium Ammonothermal (NEAT) Growth of GaN Substrates for GaN-on-GaN Semiconductor Devices

This paper reviews the near-equilibrium ammonothermal (NEAT) growth of bulk gallium nitride (GaN) crystals and reports the evaluation of 2″ GaN substrates and 100 mmbulk GaN crystal grown in our pilot production reactor. Recent progress in oxygen reduction enabled growing NEAT GaN substrates with lower residual oxygen, coloration, and optical absorption. The oxygen concentration was approximately 2 × 1018 cm−2, and the optical absorption coefficient was 1.3 cm−1 at 450 nm. Maps of full-width half maximum (FWHM) of X-ray diffraction rocking curveswere generated for grown crystals and finished wafers. The X-ray rocking curve maps confirmed high-quality and uniform microstructure across the entire surface of the bulk crystals and substrates. The average FWHM of the 50 best bulk crystals from the recent batch was 28 ± 4 arcsec for the 002 diffraction and 34 ± 5 arcsec for the 201 diffraction, with an average radius of curvature of 20 m. X-ray topography measured on both sides of the bulk crystals implied that the density of dislocations wasreduced by one order of magnitude during the NEAT growth. A typical NEAT GaN substrate shows dislocation density of about 2 × 105 cm−2.

36 MATERIALS SCIENCE↗

A Rate Theory Model of Radiation-Induced Swelling in an Austenitic Stainless Steel

Many rate theory models of cavity (void) swelling have been published over the past 50 years, all having the same, or similar, structures. A rigorous validation of the models has not been possible because of the dearth of information concerning the microstructures that correspond with the swelling data. Whereas the lack of microstructure information is still an issue for historical swelling data, in the past 10–20 years data have been published on the evolution of the microstructure (point defect yields from collision cascades, cavity number densities, and dislocation densities/yield strengths) allowing certain gaps in information to be filled when considering historic swelling data. With reasonable estimates of key microstructure parameters, a standard rate theory model can be applied, and the model parameter space explored, in connection with historical swelling data. By using published data on: (i) yield strength as a function of dose and temperature (to establish an empirical expression for dislocation density evolution); (ii) cavity number densities as a function of temperature; and (iii) freely migrating defect (FMD) production as a function of primary knock-on atom (PKA) spectrum, the necessary parameter and microstructure inputs that were previously unknown can be used in model development. This paper describes a rate-theory model for void swelling of 316 stainless steel irradiated in the EBR-2 reactor as a function of irradiation temperature and neutron dose.

36 MATERIALS SCIENCE↗

Backstress, The Bauschinger Effect, and Cyclic Deformation

Backstresses or long range internal stresses (LRIS) in the past have been suggested by many to exist in plastically deformed crystalline materials. Elevated stresses can be present in regions of elevated dislocation density or dislocation heterogeneities in the deformed microstructures. The heterogeneities include edge dislocation dipole bundles (veins) and the edge dipole walls of persistent slip bands (PSBs) in cyclically deformed materials and cell and subgrain walls in monotonically deformed materials. The existence of long range internal stress is especially important for the understanding of cyclic deformation and also monotonic deformation. X-ray microbeam diffraction experiments performed by the authors using synchrotron x-ray microbeams determined the elastic strains within the cell interiors. The studies were performed using, oriented, monotonically deformed Cu single crystals. The results demonstrate that small long-range internal stresses are present in cell interiors. These LRIS vary substantially from cell to cell as 0% to 50% of the applied stress. The results are related to the Bauschinger effect, often explained in terms of LRIS.

36 MATERIALS SCIENCE↗

Backstress, the Bauschinger Effect and Cyclic Deformation

Backstresses or long range internal stresses (LRIS) in the past have been suggested by many to exist in plastically deformed crystalline materials. Elevated stresses can be present in regions of elevated dislocation density or dislocation heterogeneities in the deformed microstructures. The heterogeneities include edge dislocation dipole bundles (veins) and the edge dipole walls of persistent slip bands (PSBs) in cyclically deformed materials and cell and subgrain walls in monotonically deformed materials. The existence of long range internal stress is especially important for the understanding of cyclic deformation and also monotonic deformation. X-ray microbeam diffraction experiments performed by the authors using synchrotron x-ray microbeams determined the elastic strains within the cell interiors. The studies were performed using, oriented, monotonically deformed Cu single crystals. The results demonstrate that small long-range internal stresses are present in cell interiors. These LRIS vary substantially from cell to cell as 0 % to 50 % of the applied stress. The results are related to the Bauschinger effect, often explained in terms of LRIS.

36 MATERIALS SCIENCE↗

In-situ synchrotron X-ray study of microstructural evolution during creep deformation in Grade 91 steel

Here, creep deformation mechanism of Grade 91 steel at 650 °C was investigated in-situ via wide-angle X-ray scattering (WAXS). WAXS peak broadening and a modified Williamson-Hall analysis provided information on evolution of dislocation densities in the primary α–Fe phase, while WAXS peak shifts provided lattice strains in the α–Fe matrix, M 23 C 6 and MX precipitates. Load transfer was not evident during in-situ creep deformation, suggesting that precipitates did not significantly strengthen the matrix during creep deformation. Peak broadening results illustrated an increase in average dislocation density during primary stage creep. After onset of secondary creep, there was a decrease in dislocation density, attributed to annihilation and re-ordering of dislocations in the subgrain structure, followed by a relatively constant average dislocation density with increasing strain.

36 MATERIALS SCIENCE↗

In Situ TEM Investigation of ZnO Nanowires during Sodiation and Lithiation Cycling

The development of sodium-ion batteries has drawn lots of attention recently due to the low-cost and eco-friendly sodium source. However, a fundamental understanding of the sodiation behavior for commonly used electrode materials is still limited. Here, combining in situ transmission electron microscopy, aberration-corrected scanning transmission electron microscopy, and ex situ battery cycling tests, the lithiation and sodiation behavior of ZnO nanowires is investigated. The findings show a direct correlation between the mechanical behavior of the lithiated/sodiated ZnO nanowires and their electrochemical cyclability. The mechanical brittleness of LiZn and the formation of nanocracks lead to the poor cyclability of Li-ion batteries with a ZnO anode. However, the sodiated ZnO nanowires show profuse dislocation plasticity. The observed high-density dislocations offer the sodiated ZnO anode more ductility and subsequently better cyclability than its Li-ion counterpart. The results reveal the importance of understanding the correlation between mechanical properties of battery electrodes and their cycling abilities.

Asayesh-Ardakani, Hasti↗

Theoretical Investigation of Microstructure Evolution and Deformation of Zirconium Under Cascade Damage Conditions

This work is based on our reaction-diffusion model of radiation growth of Zr-based materials proposed recently in "On the Origin of Radiation Growth of HCP Crystals". In "On the Origin of Radiation Growth of HCP Crystals", the equations for the strain rates in unloaded pure crystal under cascade damage conditions of, e.g., neutron or heavy-ion irradiation were derived as functions of dislocation densities, which include contributions from dislocation loops, and spatial distribution of their Burgers vectors. The model takes into account the intra-cascade clustering of self-interstitial atoms and their one-dimensional diffusion; explains the growth stages, including the break-away growth of pre-annealed samples; and accounts for some striking observations, such as of negative strain in prismatic direction, and co-existence of vacancy- and interstitial-type prismatic loops. In this report, the change of dislocation densities due to accumulation of sessile dislocation loops is taken into account explicitly to investigate the dose dependence of radiation growth. The dose dependence of climb rates of dislocations is calculated, which is important for the climb-induced glide model of radiation creep. The results of fitting the model to available experimental data and some numerical calculations of the strain behavior of Zr for different initial dislocation structures are presented and discussed. The computer code RIMD-ZR.V1 (Radiation Induced Microstructure and Deformation of Zr) developed is described and attached to this report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dislocation and Structural Studies at Metal–Metallic Glass Interface at Low Temperature

In this paper, molecular dynamics (MD) simulation deformation studies on the Al (metal)–Cu{sub 50}Zr{sub 50} (metallic glass) model interface is carried out based on cohesive zone model. The interface is subjected to mode-I loading at a strain rate of 10{sup 9} s{sup −1} and temperature of 100 K. The dislocations reactions and evolution of dislocation densities during the deformation have been investigated. Atomic interactions between Al, Cu and Zr atoms are modeled using EAM (embedded atom method) potential, and a timestep of 0.002 ps is used for performing the MD simulations. A circular crack and rectangular notch are introduced at the interface to investigate the effect on the deformation behavior and fracture. Further, scale size effect is also investigated. The structural changes and evolution of dislocation density are also examined. It is found that the dominant deformation mechanism is by Shockley partial dislocation nucleation. Amorphization is observed in the Al regions close to the interface and occurs at a lower strain in the presence of a crack. The total dislocation density is found to be maximum after the first yield in both the perfect and defect interface models and is highest in the case of perfect interface with a density of 6.31 × 10{sup 17} m{sup −2}. In the perfect and circular crack defect interface models, it is observed that the fraction of Shockley partial dislocation density decreases, whereas that of strain rod dislocations increases with increase in strain.

36 MATERIALS SCIENCE↗

Investigating Influential Parameters for High-Purity Germanium Crystal Growth

This paper focuses on the research and development of high-purity germanium (HPGe) crystals for detector fabrication, specifically targeting applications in rare-event physics searches. The primary objective was to produce large-scale germanium crystals weighing >1 kg with a controlled diameter of ∼10 cm and an impurity range of approximately 1010/cm 3. Ensuring structural integrity and excellent crystalline quality requires a thorough assessment of dislocation density, a critical aspect of the crystal development process. Dislocation density measurements play a crucial role in maximizing the sensitivity of HPGe detectors, and our findings confirmed that the dislocation density fell within acceptable ranges for detector fabrication. Additionally, this paper examines the segregation coefficient of various contaminants during the crystal development process. Comprehensive analysis of impurity segregation is essential for reducing contaminant quantities in the crystal lattice and customizing purification processes. This, in turn, minimizes undesired background noise, enhancing signal-to-noise ratios for rare-event physics searches and overall detector performance. The investigation included the segregation coefficients of three major acceptors and one donor in crystals grown at the University of South Dakota, providing valuable insights for optimizing crystal purity and detector efficiency.

Bhattarai, Sanjay↗

The critical role of growth temperature on the structural and electrical properties of AlGaN/GaN high electron mobility transistor heterostructures grown on Si(111)

This work is dedicated to the study of the growth by ammonia source molecular beam epitaxy of Al{sub x}Ga{sub 1-x}N/GaN high electron mobility transistors on (111) oriented silicon substrates. The effect of growth conditions on the structural and electrical properties of the heterostructures was investigated. It is shown that even a slight variation in the growth temperature of the thick GaN buffer on AlN/GaN stress mitigating layers has a drastic influence on these properties via a counterintuitive effect on the dislocation density. Both in situ curvature measurements and ex situ transmission electron microscopy and x-ray diffraction experiments indicate that the relaxation rate of the lattice mismatch stress increases with the growth temperature but finally results in a higher dislocations density. Furthermore, a general trend appears between the final wafer curvature at room temperature and the threading dislocation density. Finally, the influence of the dislocation density on the GaN buffer insulating properties and the two-dimensional electron gas transport properties at the Al{sub x}Ga{sub 1-x}N/GaN interface is discussed.

36 MATERIALS SCIENCE↗

Dislocation-related trap levels in nitride-based light emitting diodes

Deep level transient spectroscopy was performed on InGaN/GaN multiple quantum well light emitting diodes (LEDs) in order to determine the effect of the dislocation density on the deep intragap electronic levels. The LEDs were grown by metalorganic vapor phase epitaxy on GaN templates with a high dislocation density of 8 × 10{sup 9} cm{sup −2} and a low dislocation density of 3 × 10{sup 8} cm{sup −2}. Three trapping levels for electrons were revealed, named A, A1, and B, with energies E{sub A} ≈ 0.04 eV, E{sub A1} ≈ 0.13 eV, and E{sub B} ≈ 0.54 eV, respectively. The trapping level A has a much higher concentration in the LEDs grown on the template with a high density of dislocations. The logarithmic dependence of the peak amplitude on the bias pulse width for traps A and A1 identifies the defects responsible for these traps as associated with linearly arranged defects. We conclude that traps A and A1 are dislocation-related intragap energy levels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗