Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed solar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sensitivity of Simulated Polar Climate to Improved Partitioning of Spectral Solar Irradiance Between Visible and Near‐Infrared Bands

The solar radiative processes that contribute to Earth's surface and atmospheric energy budgets are strongly dependent on wavelength. For example, snow and water vapor become more absorptive as incident radiation shifts from visible (VIS) to near-infrared (NIR) wavelengths. Some earth system models (ESMs) aggregate solar radiation into just two bands (VIS and NIR) partitioned at 0.7 μm for transmission between the atmospheric and surface components. In the widely used radiative transfer model RRTMG_SW this partition is near the center of the overlap spectral band spanning 0.625–0.778 μm, whose flux is often approximated as being evenly divided between the VIS and NIR surface bands. Using a hyperspectral radiative transfer model, we show that the fractional downwelling surface flux within the overlap band is usually distributed about 55.5%:44.5% VIS:NIR. This improved approximation shifts as much as 4.27 W m −2 from the NIR to the VIS band, leading to an instantaneous decrease in surface absorption of up to 0.91 W m −2 over snow-covered surfaces. Century-long fully coupled ESM simulations show surface absorption over snow decreases by over 1.6 W m −2 . The coupled response in sea ice regions amplifies the initial forcing ten-fold, and increases seasonal sea ice area by up to 4.9%. These results highlight the importance of accurately representing the spectral distribution of solar radiation in the cryosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Real-World 20-Hz IBR Subsynchronous Oscillations: Signatures and Mechanism Analysis

This article provides analyses of subsynchronous oscillations associated with solar photovoltaics (PVs) observed in real world. All have oscillation frequencies at approximately 20 Hz in voltage and current magnitudes. On the other hand, in phase voltage and current, the oscillations show very different signatures. Through constructing simplified linear models and conducting sensitivity analysis, we are able to associate dynamic phenomena with the underlying mechanism and speculate the possible causes of the 20-Hz oscillations. The analysis results have all been validated via simulation results from electromagnetic transient (EMT) test beds constructed in MATLAB/Simscape.

inverter-based resources↗
DOE OSTI2024

Connector Reliability Across the U.S. Solar Sector

This presentation describes preventative and corrective maintenance costs associated with PV connectors, downtime resulting from failed connectors, and impact of connectors on LCOE. The presentation described the NREL portion of a project also involving portions by Sandia NL and EPRI which will be presented separately.

connector↗
DOE OSTI2025

Galactic Chemical Evolution of Short-lived Radioactive Isotopes Produced by Explosive Nucleosynthesis: 60 Fe and 53 Mn

Several short-lived radionuclides (SLRs) are know to have existed in the early solar system (ESS). These species, which typically decay with half-lives of the order of a few million years, can be used to probe the timescales of events preceding the birth of the Sun. We investigate the ESS origin of 53 Mn, produced by core-collapse supernovae (CCSNe) and Type Ia supernovae (SNe Ia), and 60 Fe, produced exclusively by CCSNe. We model the evolution of the radioactive-to-stable abundance ratios of these SLRs with a Galactic chemical evolution (GCE) framework accounting for different SN yields, SN Ia delay times, and other Galactic features (K). A further set of models is calculated assuming that SNe Ia did not contribute any 53 Mn to the ESS. The predicted ratios are compared to meteoritic ratios to derive a distribution of solar isolation times that includes uncertainties due to stochastic chemical enrichment and measurements of the ESS values. The isolation times are then compared to those of 107 Pd and 182 Hf calculated in previous work. A self-consistent solution can be found within the current uncertainties, especially when using the GCE setups with K = 1.6 and 2.3, although the maximum likelihood for the 60 Fe distribution is typically ∼4–5 Myr shorter than for 53 Mn. The predicted 60 Fe/ 53 Mn ratio, instead, is completely inconsistent with the ESS value; this could be resolved using a larger fraction of faint CCSNe than usually considered in GCE models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Integrated Transmission and Distribution Co-Simulation Platform for Demonstration of Bulk Grid Services Using Distributed Energy Resources

In September 2020, the Federal Energy Regulatory Commission (FERC) released Order 2222, which opens wholesale markets to small-capacity distributed energy resources (DERs), recognizing their potential in improving operational efficiency by providing bulk grid services. Therefore, a co-simulation capability that can connect transmission and distribution (T&D) simulations and evaluate the impacts of DER provision of bulk grid services is needed. In this paper, we present a new integrated T&D co-simulation platform that incorporates T&D system simulators, DER aggregator/group strategies, and a co-simulation coordinator. Industry-standard communication protocols are employed to mimic real-world conditions. Secondary frequency regulation is selected as the representative bulk grid service, and we simulate the responses of DERs to the frequency regulation signals. The simulation results for a solar-rich distribution feeder in Colorado, USA, demonstrate how the T&D co-simulation setup is used to evaluate the contributions of DERs to minimize the bulk grid frequency deviation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Identifying Potential Candidates for Renewable Energy Zones (REZs) in Bangladesh

Bangladesh faces several hurdles to achieving its renewable energy objectives, such as land availability and transmission congestion. Renewable Energy Zones (REZ), which are geographic areas with high-quality utility-scale renewable resources, suitable land topography, and commercial interest, can help address these challenges and support long-term generation and transmission planning. This study focuses on solar PV (fixed-tilt) and onshore wind, leveraging recently developed high temporal and spatial resolution resource data. In the moderate land exclusion scenario, large "study areas" are identified in Bangladesh with capacity factors in the top 25% for the entire country - 5 for wind and 8 for solar. Within these study areas, 19 candidates for REZ are identified based on the overlap between these study areas and upazilas (i.e., administrative subdivisions) containing economic development zones. Four of the identified candidate zones are opportunities for priority development, given the combination of strong wind and solar resources and the presence of economic zones. Furthermore, the geographic diversity of wind and solar resources in Bangladesh could help increase grid resilience by not concentrating all renewable energy development in the same region. Finally, pairing REZ with economic zones can bolster economic development, take advantage of large electricity demand, and leverage existing infrastructure investments.

Bangladesh↗
DOE OSTI2024

What Is Power System Curtailment?

Curtailment is the intentional reduction of instantaneous power from non- dispatchable variable renewable energy (VRE) resources like wind and solar photovoltaics relative to what would naturally be available from the wind and the sun. This curtailed energy is the difference between the total available energy and actual production. This fact sheet provides a summary of curtailment in power systems and presents selected insights into specific ways in which curtailment is implemented by a selection of System Operators.

curtailment↗
DOE OSTI2024

Improving the National Solar Radiation Database (NSRDB) Using a Physics-Based Direct Normal Irradiance (DNI) Model: Preprint

The National Solar Radiation Database (NSRDB) is a widely used resource providing satellite-derived solar data across the United States and globally. While the NSRDB employs a physical model for computing global horizontal irradiance (GHI), its current method for estimating cloudy-sky direct normal irradiance (DNI) relies on surface observations and empirical models. Recently, a novel physics-based approach, the Fast All-Sky Radiation Model for Solar applications with DNI (FARMS-DNI), was developed to enhance the DNI forecasting. FARMS-DNI incorporates both direct and scattered solar radiation within the circumsolar region, resulting in improved day-ahead DNI predictions when integrated into the Weather Research and Forecasting model with Solar extensions (WRF-Solar). This study integrates FARMS-DNI into the NSRDB algorithm to generate high-resolution DNI data from satellite resources. Our findings reveal that FARMS-DNI effectively mitigates the substantial DNI overestimation present in the conventional NSRDB across surface sites, particularly in conditions categorized as cloudy overcast. Consequently, this innovative model substantially enhances the overall accuracy of the NSRDB.

DNI↗
DOE OSTI2024

Statistical Downscaling of Climate Models for Solar Resource Assessment

This study presents the development of statistical models to efficiently downscale future projections of solar irradiance for solar energy applications. A climate data set simulated from a Regional Climate Model (RCM) obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) is selected as input to the statistical models to create high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). Our approach builds statistical downscaling models that (1) regrid RCM data (0.22 degree and daily spatiotemporal resolution), (2) correct bias of GHI projections, (3) downscale the future GHI project from daily-scale to hourly-scale, and (4) spatially downscale to generate GHI at 8-km resolution. To calibrate and validate the statistical models, we adapt and use the National Solar Radiation Database (NSRDB). Preliminary results show that the statistical downscaling approach downscales future projections of GHI under two climate scenarios (RCP4.5 and RCP8.5) with a nBIAS of 3%, nMAE of 34% and nRMSE of 46% estimated against NSRDB for the contiguous United State. This presentation will summarize the implemented methodology and validation results as well as future extension of this research.

climate data↗
DOE OSTI2023

DER Digital Supply Chain Gap Analysis

Solar photovoltaic (PV) cybersecurity is a growing field of research. As deployments of solar PV have increased, cyber risk has also increased. Utility solar PV installations, however, are not required to comply with the North American Electric Reliability Corporation (NERC) Critical Infrastructure Protection (CIP) plan unless they meet a minimum generation threshold of 75 MW. Individual residential-scale solar PV deployments will not meet that generation threshold and are therefore excluded from the NERC CIP requirements. With most solar installations less than 75 MW, solar PV has been deployed with minimal oversight and highly variable cybersecurity maturity. The resources that comprise the digital supply chain can include software, code, data, and other digital components. But as clean energy technologies advance, cybersecurity threats and vulnerabilities continue to evolve and grow in sophistication. Supply chain cybersecurity represents a critical area for ensuring safe operations as the U.S. moves toward a clean energy future.

cybersecurity↗
DOE OSTI2025

Novel Approach to PV Inverter Modeling and Simulation Leveraging Experiments, Learning Based Modeling and Co-Simulation

Photovoltaic (PV) inverter manufacturers use custom, proprietary control approaches and topologies in their inverter design. The proprietary nature of these approaches makes it challenging to share electromagnetic transients (EMT) domain models for system studies. This research work presents an approach to develop EMT models from experimental data. We use novel approach in experimental design, high fidelity data collection, use of learning-based modeling, and co-simulation to reduce the time taken to develop an EMT model for an inverter under test (IUT). We used a 20 kW off-the-shelf grid following PV inverter and subjected the inverter to controlled tests. The tests include voltage and frequency step changes, as well as solar irradiance variations. The recorded high frequency data were used to train a neural network model representing the dynamic behavior of the IUT. The model was subsequently imported into an EMT tool using co-simulation techniques, and thus completing the modeling effort.

black box inverter modeling↗
DOE OSTI2024

The National Climate Data Base (NCDB): A Bias-Corrected High-Resolution Climate Dataset

Assessing renewable energy resources under future climate scenarios has been highlighted in recent years to analyze and understand potential impacts of future change in renewable generation on the power sector. Solar energy is well-known as the most plentiful among various renewable resources and usually converted to electricity using photovoltaics (PV) technologies, and the global deployment of PV technology has increased rapidly in recent decades. In this study, we develop a statistical technique to downscale the future projection of solar irradiance for PV energy-related applications. A set of Regional Climate Model (RCM)-based projections obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) are used as inputs to statistical methods to generate high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). The main steps of the statistical downscaling method include (1) regridding RCM output (0.22 degree and daily resolutions) to handle the modeled-observed data sets on a common grid, (2) correcting bias of RCM GHI using satellite-derived observation, and (3) implementing temporal and spatial downscaling to generate GHI at 8-km and hourly resolution. Basically, complex physical processes and interactions between solar radiation and various atmospheric constituents lead solar irradiance to be highly variable and uncertain. Underrepresentation of clouds from the RCM parameterizations is the main source of error and uncertainty in modeling solar irradiance. Thus, we adapt and use the high-quality satellite-derived data from the National Solar Radiation Database (NSRDB) to analyze the bias and error of RCM GHI as well as estimate the statistical parameters for spatial and temporal downscaling. This presentation will summarize the comprehensive analysis conducted to produce and assess the results under two climate scenarios (RCP4.5 and RCP8.5). We will also present a detailed validation demonstrating the strengths of the proposed downscaling method and future extension of this research.

climate data↗
DOE OSTI2023

Eco–Friendly Solvent Engineered CsPbI 2.77 Br 0.23 Ink for Large–Area and Scalable High Performance Perovskite Solar Cells

The performance of large-area perovskite solar cells (PSCs) has been assessed for typical compositions, such as methylammonium lead iodide (MAPbI 3 ), using a blade coater, slot-die coater, solution shearing, ink-jet printing, and thermal evaporation. However, the fabrication of large-area all-inorganic perovskite films is not well developed. This study develops, for the first time, an eco-friendly solvent engineered all-inorganic perovskite ink of dimethyl sulfoxide (DMSO) as a main solvent with the addition of acetonitrile (ACN), 2-methoxyethanol (2-ME), or a mixture of ACN and 2-ME to fabricate large-area CsPbI 2.77 Br 0.23 films with slot-die coater at low temperatures (40–50 °C). The perovskite phase, morphology, defect density, and optoelectrical properties of prepared with different solvent ratios are thoroughly examined and they are correlated with their respective colloidal size distribution and solar cell performance. Here, the optimized slot-die-coated CsPbI 2.77 Br 0.23 perovskite film, which is prepared from the eco-friendly binary solvents dimethyl sulfoxide:acetonitrile (0.8:0.2 v/v), demonstrates an impressive power conversion efficiency (PCE) of 19.05%. Moreover, the device maintains ≈91% of its original PCE after 1 month at 20% relative humidity in the dark. It is believed that this study will accelerate the reliable manufacturing of perovskite devices.

binary and ternary solvent↗
DOE OSTI2021

Model-Free Voltage Control of Active Distribution System with PVs Using Surrogate Model-Based Deep Reinforcement Learning

Accurate knowledge of the distribution system topology and parameters is required to achieve good voltage control performance, but this is difficult to obtain in practice. This paper proposes a physical-model-free voltage control method based on a surrogate-model-enabled deep reinforcement learning approach. Specifically, a surrogate model is trained in a supervised manner using the recorded limited number of historical data to learn the relationship between the power injections and voltage fluctuations of each node. Then, the deep reinforcement learning algorithm is applied to learn an optimal control strategy from the experiences obtained by continuous interactions with the surrogate model. The proposed method can achieve physical-model-free control of unbalanced distribution network and inform real-time decisions to deal with fast voltage fluctuations caused by the rapid variation of PV generation. Simulation results on an unbalance IEEE 123-bus system show that the proposed method can achieve similar performance as that of perfect physical-model-based approaches while being advantageous over other traditional methods.

active distribution network↗