Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near-Earth asteroid (NEA) population is thought to contain approximately 1500 objects as large as a kilometer, approximately 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near Earth asteroid (NEA) population is thought to contain approx. 1500 objects as large as a kilometer, approx. 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗

Carbon-Nanotube-Carpet Heat-Transfer Pads

Microscopic thermal-contact pads that include carpet-like arrays of carbon nanotubes have been invented for dissipating heat generated in integrated circuits and similarly sized single electronic components. The need for these or other innovative thermal-contact pads arises because the requisite high thermal conductances cannot be realized by scaling conventional macroscopic thermal-contact pads down to microscopic sizes. Overcoming limitations of conventional thermal-contact materials and components, the carbon-nanotube thermal-contact pads offer the high thermal conductivities needed to accommodate the high local thermal power densities of modern electronic circuits, without need for large clamping pressures, extreme smoothness of surfaces in contact, or gap-filling materials (e.g., thermally conductive greases) to ensure adequate thermal contact. Moreover, unlike some conventional thermal-contact components, these pads are reusable. The figure depicts a typical pad according to the invention, in contact with a rough surface on an electronic component that is to be cooled. Through reversible bending and buckling of carbon nanotubes at asperities on the rough surface, the pad yields sufficiently, under relatively low contact pressure, that thermal contact is distributed to many locations on the surface to be cooled, including valleys where contact would not ordinarily occur in conventional clamping of rigid surfaces. Hence, the effective thermal-contact area is greater than that achievable through scaling down of a macroscopic thermal-contact pad. The extremely high longitudinal thermal conductivities of the carbon nanotubes are utilized to conduct heat away from potential hot spots on the surface to be cooled. The fibers protrude from a layer of a filler material (Cu, Ag, Au, or metal-particle- filled gels), which provides both mechanical support to maintain the carbon nanotubes in alignment and thermal conductivity to enhance the diffusion of concentrated heat from the nanotubes into the larger adjacent volume of a heat sink. The array of carbon nanotubes, the filler material, and the heat sink are parts of a unitary composite structure that is fabricated as follows: 1. Using techniques that have been reported previously, the array of substantially perpendicularly oriented carbon nanotubes is grown on a metal, silicon, or other suitable thermally conductive substrate that is intended to become the heat sink. 2. By means of chemical vapor deposition, physical vapor deposition, plasma deposition, ion sputtering, electrochemical deposition, or casting from a liquid phase, some or all of the interstitial volume between carbon nanotubes is filled with the aforementioned layer of mechanically supporting, thermally conductive material. 3. To cause the carbon nanotubes to protrude the desired length from the filler material, an outer layer of filler is removed by mechanical polishing, chemical mechanical polishing, wet chemical etching, electrochemical etching, or dry plasma etching.

Li, Jun↗

Bidirectional reflectance spectroscopy. II - Experiments and observations

Aspects of the theoretical bidirectional reflectance expression derived by Hapke (1981) are studied experimentally, and it is shown that the expression describes satisfactorily the measured angular scattering and spectral properties of a cobalt glass powder in which the two properties vary greatly with wavelength. The theoretical reflectance function also describes measured distributions of intensity across the surfaces of planets, except near the sunlit limb, where the macroscopic roughness influences the brightness.

Hapke, B.↗

Reflectance Modeling

A classical description of the one dimensional radiative transfer treatment of vegetation canopies was completed and the results were tested against measured prairie (blue grama) and agricultural canopies (soybean). Phase functions are calculated in terms of directly measurable biophysical characteristics of the canopy medium. While the phase functions tend to exhibit backscattering anisotropy, their exact behavior is somewhat more complex and wavelength dependent. A Monte Carlo model was developed that treats soil surfaces with large periodic variations in three dimensions. A photon-ray tracing technology is used. Currently, the rough soil surface is described by analytic functions and appropriate geometric calculations performed. A bidirectional reflectance distribution function is calculated and, hence, available for other atmospheric or canopy reflectance models as a lower boundary condition. This technique is used together with an adding model to calculate several cases where Lambertian leaves possessing anisotropic leaf angle distributions yield non-Lambertian reflectance; similar behavior is exhibited for simulated soil surfaces.

Smith, J. A.↗

Effect of sound on boundary layer stability

Experiments are conducted in the Arizona State University Unsteady Wind Tunnel with a zero-pressure-gradient flat-plate model that has a 67:1 elliptical leading edge. Boundary-layer measurements are made of the streamwise fluctuating-velocity component in order to identify the amplified T-S waves that are forced by downstream-traveling sound waves. Measurements are taken with circular 3-D roughness elements placed at the Branch 1 neutral stability point for the frequency under consideration, and then with the roughness element downstream of Branch 1. These roughness elements have a principal chord dimension equal to 2 lambda(sub TS)/pi of the T-S waves under study and are 'stacked' in order to resemble a Gaussian height distribution. Measurements taken just downstream of the roughness (with leading-edge T-S waves, surface roughness T-S waves, instrumentation sting vibrations, and the Stokes wave subtracted) show the generation of 3-D T-S waves, but not in the characteristic heart-shaped disturbance field predicted by 3-D asymptotic theory. Maximum disturbance amplitudes are found on the roughness centerline. However, some near-field characteristics predicted by numerical modeling are observed.

Saric, William S.↗

Effect of sound on boundary layer stability

Experiments are conducted in the Arizona State University Unsteady Wind Tunnel with a zero-pressure-gradient flat-plate model that has a 67:1 elliptical leading edge. Boundary-layer measurements are made of the streamwise fluctuating-velocity component in order to identify the amplified T-S waves that are forced by downstream-travelling, sound waves. Measurements are taken with circular 3-D roughness elements placed at the Branch 1 neutral stability point for the frequency under consideration, and then with the roughness element downstream of Branch 1. These roughness elements have a principal chord dimension equal to 2(lambda)(sub TS)/pi, of the T-S waves under study and are 'stacked' in order to resemble a Gaussian height distribution. Measurements taken just downstream of the roughness (with leading-edge T-S waves, surface roughness T-S waves, instrumentation sting vibrations and the Stokes wave subtracted) show the generation of 3-D-T-S waves, but not in the characteristic heart-shaped disturbance field predicted by 3-D asymptotic theory. Maximum disturbance amplitudes are found on the roughness centerline. However, some near-field characteristics predicted by numerical modelling are observed.

Saric, William S.↗

Planetary Geophysics and Tectonics

We have carried out several studies that explore explanations for the role of chemical density variations in Moon s evolution. Meaningful models for the evolution of the Moon must explain a number of important magmatic characteristics. Volcanic activity subsequent to the formation of its anorthositic crust was dominated by the eruption of mare basalt. 1) The main phase of mare volcanism began approx. 500 Myr after the crystallization of the anorthositic crust and continued for approx. l Gyr. 2) The picitic glasses, considered to be representative of mare basalt least affected by low pressure, near-surface fractionation, were generated by melting, at 400-600 km depth, of a source containing components that, on the basis of the magma ocean hypothesis, should have crystallized at much shallower depth during fractionation of the anorthositic crust. 3) Mare basalts occur primarily in one region of the Moon. Recent topographic data demonstrate that the earlier idea that mare basalt flooded areas of low elevation is not correct. Large areas of very low elevation do not contain mare basalt. The hemispheric asymmetry of mare basalt distribution on the lunar surface must be explained in some other way. 4) A region of the surface roughly correlating with that containing mare basalts also is thought to contain high subsurface concentrations of KREEP which was excavated during the formation of large impact basins. This so-called Procellarum KREEP Terrane (PKT) is responsible for the Imbrium basin-centered thorium anomaly mapped by Lunar Prospector.

Parmentier, E. Marc↗

An investigation of the observability of ocean-surface parameters using GEOS-3 backscatter data

The degree to which ocean surface roughness can be synoptically observed through use of the information extracted from the GEOS-3 backscattered waveform data was evaluated. Algorithms are given for use in estimating the radar sensed waveheight distribution or ocean-surface impulse response. Other factors discussed include comparisons between theoretical and experimental radar cross section values, sea state bias effects, spatial variability of significant waveheight data, and sensor-related considerations.

Miller, L. S.↗

Detecting surface roughness effects on the atmospheric boundary layer via AIRSAR data: A field experiment in Death Valley, California

The part of the troposphere influenced by the surface of the earth is termed the atmospheric boundary layer. Flow within this layer is influenced by the roughness of the surface; rougher surfaces induce more turbulence than smoother surfaces and, hence, higher atmospheric transfer rates across the surface. Roughness elements also shield erodible particles, thus decreasing the transport of windblown particles. Therefore, the aerodynamic roughness length (z(sub 0)) is an important parameter in aeolian and atmospheric boundary layer processes as it describes the aerodynamic properties of the underlying surface. z(sub 0) is assumed to be independent of wind velocity or height, and dependent only on the surface topography. It is determined using in situ measurements of the wind speed distribution as a function of height. For dry, unvegetated soils the intensity of the radar backscatter (sigma(sup 0)) is affected primarily by surface roughness at a scale comparable with the radar wavelength. Thus, both wind and radar respond to surface roughness variations on a scale of a few meters or less. Greeley showed the existence of a correlation between z(sub 0) and sigma(sup 0). This correlation was based on measurements over lava flows, alluvial fans, and playas in the southwest deserts of the United States. It is shown that the two parameters behave similarly also when there are small changes over a relatively homogeneous surface.

Blumberg, Dan G.↗

A simulation study of scene confusion factors in sensing soil moisture from orbital radar

Simulated C-band radar imagery for a 124-km by 108-km test site in eastern Kansas is used to classify soil moisture. Simulated radar resolutions are 100 m by 100 m, 1 km by 1km, and 3 km by 3 km. Distributions of actual near-surface soil moisture are established daily for a 23-day accounting period using a water budget model. Within the 23-day period, three orbital radar overpasses are simulated roughly corresponding to generally moist, wet, and dry soil moisture conditions. The radar simulations are performed by a target/sensor interaction model dependent upon a terrain model, land-use classification, and near-surface soil moisture distribution. The accuracy of soil-moisture classification is evaluated for each single-date radar observation and also for multi-date detection of relative soil moisture change. In general, the results for single-date moisture detection show that 70% to 90% of cropland can be correctly classified to within +/- 20% of the true percent of field capacity. For a given radar resolution, the expected classification accuracy is shown to be dependent upon both the general soil moisture condition and also the geographical distribution of land-use and topographic relief. An analysis of cropland, urban, pasture/rangeland, and woodland subregions within the test site indicates that multi-temporal detection of relative soil moisture change is least sensitive to classification error resulting from scene complexity and topographic effects.

Ulaby, F. T.↗

Heat transfer distributions around nominal ice accretion shapes formed on a cylinder in the NASA Lewis icing research tunnel

Local heat transfer coefficients were obtained on irregular cylindrical shapes which typify the accretion of ice on circular cylinders in cross flow. The ice shapes were grown on a 5.1 cm (2.0 in.) diameter cylinder in the NASA Lewis Icing Research Tunnel. The shapes were 2, 5, and 15 min accumulations of glaze ice and 15 min accumulation of rime ice. Heat transfer coefficients were also measured around the cylinder with no ice accretion. These icing shapes were averaged axially to obtain a nominal shape of constant cross section for the heat transfer tests. Heat transfer coefficients around the perimeter of each shape were measured with electrically heated copper strips embedded in the surface of the model which was cast from polyurethane foam. Each strip contained a thermocouple to measure the local surface temperature. The models were run in a 15.2 x 68.6 cm (6 x 27 in.) wind tunnel at several velocities. Background turbulence in the wind tunnel was less than 0.5 percent. The models were also run with a turbulence producing grid which gave about 3.5 percent turbulence at the model location with the model removed. The effect of roughness was also simulated with sand grains glued to the surface. Results are presented as Nusselt number versus angle from the stagnation line for the smooth and rough models for both high and low levels of free stream turblence. Roughness of the surface in the region prior to flow separation plays a major role in determining the heat transfer distribution.

Vanfossen, G. J.↗

Surface roughness studies with DALLAS-detector array for laser light angular scattering

An attempt is made to develop a better mathematical description of optical scattering phenomena, in order to construct an optical scattering apparatus for reliable and routine measurements of roughness parameters without resorting to comparator standards. After a brief outline of optical scattering theory, a description is presented of an experimental instrument for measuring surface roughness which incorporates optical scattering principles. The instrument has a He-Ne laser which illuminates the test surface at a variable angle of incidence. Scattered light distribution is detected by an array of 87 fiber-optic sensors positioned in a rotating semicircular yoke. The output from the detector is digitized and analyzed in a laboratory computer. For a comparison with experimental data, theoretical distributions are calculated by substituting the roughness profiles into the operand of and integral equation for electromagnetic scattering developed by Beckmann and Spizzichino (1963). A schematic diagram of the instrument is provided and the general implications of the experimental results are discussed.

Vorburger, T. V.↗

Subsurface Sounding of Mars: The Effects of Surface Roughness

The Mars Advanced Radar for Subsurface and Ionospheric Sounding (MARSIS) will conduct a global survey of Mars from the Mars Express Orbiter starting in 2004. The primary objective of the subsurface observations is to detect material interfaces in the upper several kilometers of the crust of Mars, with a particular emphasis on mapping the 3D distribution of water and ice in that portion of the crust. In order to detect subsurface interfaces, the returned echo from the subsurface must be distinguished from noise and clutter, which can arise from a variety of sources. One source of clutter is surface topography that generates backscattered energy at the same time delay as the subsurface region of interest. Surface topography can affect the detectability of subsurface features in several other ways. Surface roughness at scales comparable or somewhat smaller than the radar wavelength reduces the coherency of the wave as it passes the upper interface. Also, surface slope (tilt) at scales of the radar footprint and larger (> 5 km) affects the apparent Doppler signature of the echoes, and effectively disperses the wave transmitted into the subsurface, making processing and interpretation difficult. In this paper, we report on the roughness characteristics of Mars at these various scales as measured by the Mars Global Surveyor Laser Altimeter (MOLA), and consider the implications for achieving the subsurface sounding goals of MARSIS. Additional information is contained in the original extended abstract.

Plaut, J. J.↗

A dual frequency radar for ocean roughness sampling

A microwave technique for determining the roughness (rms wave height) of a randomly varying air-water interface has been developed theoretically, verified with laboratory wavetank studies and is currently being implemented for ocean surface measurements in a series of applications flight experiments. These aircraft observations will be near the Chesapeake Light Tower and will include a range of altitudes and sea conditions. The measurement concept involves cross-correlating the envelope fluctuations on two received carriers that are monochromatic when transmitted in a normal direction to the interface and are observed in a backscatter direction after reflection by the large number of randomly distributed specular points on the surface. The measured correlation coefficient (normalized covariance) as a function of carrier frequency separation will depend on the surface roughness, specifically the probability density function of the specular point height. Details of the flight system are discussed, and preliminary flight results are presented.

Weissman, D. E.↗

Molecular dynamics of the water liquid-vapor interface

The results of molecular dynamics calculations on the equilibrium interface between liquid water and its vapor at 325 K are presented. For the TIP4P model of water intermolecular pair potentials, the average surface dipole density points from the vapor to the liquid. The most common orientations of water molecules have the C2 nu molecular axis roughly parallel to the interface. The distributions are quite broad and therefore compatible with the intermolecular correlations characteristic of bulk liquid water. All near-neighbor pairs in the outermost interfacial layers are hydrogen bonded according to the common definition adopted here. The orientational preferences of water molecules near a free surface differ from those near rigidly planar walls which can be interpreted in terms of patterns found in hexagonal ice 1. The mean electric field in the interfacial region is parallel to the mean polarization which indicates that attention cannot be limited to dipolar charge distributions in macroscopic descriptions of the electrical properties of this interface. The value of the surface tension obtained is 132 +/- 46 dyn/cm, significantly different from the value for experimental water of 68 dyn/cm at 325 K.

NASA Center ARC↗

Shuttle ascent and shock impingement aerodynamic heating studies

The collection and analysis of aerodynamic heating data obtained from shock impingement experimental investigation were completed. The data were categorized into four interference areas; fin leading edge, wing/fuselage fin/plate corners, and space shuttle configurations. The effects of shock impingement were found to increase the heating rates 10 to 40 times the undisturbed values. A test program was completed at NASA/Langley Research Center to investigate the magnitudes and surface patterns of the mated shock interference flowfield. A 0.0065 scale thin-skin model of the MDAC 256-20 space shuttle booster mated with a Stycast model of the MDAC Internal tank orbiter was tested in the 20-inch M=6 tunnel, the 31-inch M=10 tunnel, and the 48-inch Unitary Plan Tunnel. The gap region of the ascent configuration was the principal area of interest where both thermocouple and phase-change paint data were obtained. Pressure and heat transfer distributions data on the leeward surface of a 75-degree sweep slab delta wing are presented. The effects of surface roughness on boundary layer transition and aerodynamic heating were investigated.

Lanning, W. D.↗

On the Distribution and Implications of Mantled and Exhumed Terrains on Mars

The intent of this paper is to show the relationships for Mars among albedo, thermal inertia, roughness inferred from MOLA pulse width spread data, and geology inferred from photogeological analyses. Mapping of surface units using these parameters and approaches, in combination with analysis of hyperspectral image data from ISM, TES, OMEGA, and CRISM observations, will maximize our understanding of the distribution and nature of surface units on the red planet. Results will directly impact the selection of landing sites that exhibit geological records needed to understand planetary habitability.

Arvidson, R. E.↗