SEARCH · Search NASA

Results for “document analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Characterization and Modeling of Large Collapsible Tubular Mast Booms

This paper will document the analysis of high-strain composite booms in the joint NASA-German Aerospace Center (DLR) Deployable Composite Booms (DCB) project. The collapsible tubular mast (CTM) booms were manufactured at NASA Langley Research Center, where constituent material coupons were also characterized, and shipped to DLR in Germany for testing of beam properties and the strength of the DLR flight-like root deployer design. With this data, a finite element model of the booms was built, calibrated to one set of experimental measurements, and used to produce a simplified beam model for further engineering studies.The final paper will discuss the process of building this beam model and the treatment of gaps in experimental characterization.

Olive R. Stohlman↗

NASA NTRSDate not supplied

Characterization and Modeling of Large Collapsible Tubular Mast Booms

This paper documents the analysis of high-strain composite booms in the joint NASA-German Aerospace Center (DLR) Deployable Composite Booms (DCB) project. The collapsible tubular mast (CTM) booms were manufactured at NASA Langley Research Center, where constituent material coupons were also characterized, and shipped to DLR in Germany for testing of beam properties and the strength of the DLR flight-like root deployer design. With this data, a finite element model of the booms was built, calibrated to one set of experimental measurements, and used to produce a simplified beam model for further engineering studies. The process of building this beam model and the treatment of gaps in experimental characterization are presented.

composite materials↗

NASA NTRS2021

Arecibo Observatory Auxiliary M4N Socket Termination Failure Investigation

The NASA Engineering and Safety Center (NESC) was requested to support the Arecibo Observatory failure investigation in determining the root cause of the Auxiliary M4N cable failure. The NESC and Kennedy Space Center led an integrated NASA investigation with support from Marshall Space Flight Center and The Aerospace Corporation that included forensic investigation of failed hardware, finite element modeling, materials characterization, and root cause analysis. This document contains the outcome of the NESC Assessment.

Zinc Spelter Sockets↗

NASA NTRS2022

Fermi Gamma-ray Space Telescope

The Fermi Gamma-ray Space Telescope, a key mission in multiwavelength and multimessenger studies, has been surveying the γ-ray sky from its low-Earth orbit since 2008. Its two scientific instruments, the Gamma-ray Burst Monitor (GBM) and the Large Area Telescope (LAT), cover 8 orders of magnitude in photon energy. The GBM consists of 12 Sodium Iodide detectors and 2 Bismuth Germinate detectors, covering the 10 keV - 40 MeV energy range, arrayed on two sides of the spacecraft so as to view the entire sky that is not occulted by the Earth. The LAT is a pair production telescope based on silicon strip trackers, a Cesium Iodide calorimeter, and a plastic scintillator anticoincidence system. It covers the energy range from about 20 MeV to more than 500 GeV, with a field of view of about 2.4 steradians. Thanks to their huge fields of view, the instruments can observe the entire sky with a cadence of about an hour for GBM and about three hours for LAT. All γ-ray data from Fermi become public immediately, enabling a broad range of multiwavelength and multimessenger research. Over 3000 γ-ray bursts (GRBs), including GRB 170817A associated with a neutron star merger detected in gravitational waves, and 5000 high-energy sources, including the blazar TXS 0506+056 associated with high-energy neutrinos, have been detected by the Fermi instruments. The Fermi Science Support Center provides a wide array of resources to enable scientific use of the data, including background models, source catalogs, analysis software, documentation, and a Help Desk.

gamma rays↗

NASA NTRS2016

The Man-machine Integration Design and Analysis System (MIDAS) Software Training Documentation

This document is a training manual for MIDAS v5 that takes an user through the hardware and software requirements for the MIDAS V5 software, the steps required to download the software, and the steps that a user needs to take to create a MIDAS simulation. The training guide also illustrates how the models interact to generate MIDAS predictions of operator performance along task, workload, and situation awareness timelines and provides the test routines that were conducted to verify the operation of the integrated MIDAS models. The training guide shows the user how the MIDAS task model interacts with and controls an anthropometric model through its use of behavioral primitives. The training documentation also illustrates one approach that has been used to filter and analyze MIDAS output.

Brian F. Gore↗

NASA NTRSDate not supplied

Lunar Microgrid Trade Studies to Define Interface Converter Requirements

The National Aeronautics and Space Administration (NASA) is interested in developing an incremental lunar power grid to support continuous human/robotic operations under the Artemis missions and can scale to global power utilization and industrial power levels. The initial lunar surface power system will be composed primarily of assets that contain their own power generation and energy storage. These assets can be connected to form a grid, which allows power to be shared between the system’s distributed energy resources. This grid can provide backup power to existing assets as well as primary power to future assets. A trade study was conducted for an Artemis scale grid, which has identified 3 kVAC as an ideal transmission voltage. This paper documents the analysis and findings from these trade studies. These studies were used to define the operating voltage and develop a common interface for connecting lunar surface assets to the power grid. The Universal Modular Interface Converter (UMIC) connects lunar surface assets to the high voltage grid. Products from this grid definition and UMIC development work will enable highly reliable and available power for Artemis and future planetary surface missions, which is key to achieving NASA’s long-term vision of space exploration.

Planetary surface power↗

NASA NTRSDate not supplied

Overview of the Findings of the Extreme Environment Power Systems Standards Evaluation and Gap Analysis

This lightning talk gives an overview of the findings of the NASA funded Extreme Environment Power Systems Standards Evaluation and Gap Analysis. This document highlighted the gaps between terrestrial distribution system component standards and future lunar distribution system component standards. This shows that existing standards cannot be applied with small modifications for the lunar environment.

electrical power↗

NASA NTRS2008

Analysis of Ares 1 Ascent Navigation Options

The paper documents a collaborative analysis of ascent Navigation options for the Ares 1 launch vehicle by the NASA Marshall Space Flight Center (MSFC) and the C. S. Draper Laboratory. The objective of the work was the development of a Navigation concept and supporting requirements which meet the Ares 1 accuracy specification in a manner which is straightforward, reliable, and cost effective. Six primary Navigation architectures were considered. In each case analysis was performed to determine under what conditions the required accuracy at second stage cutoff could be achieved. Those architectures which met the accuracy requirements were then assessed in terms of cost, complexity, and reliability to determine a baseline Navigation approach and the primary supporting requirements.

Norris, Lee↗

NASA NTRS1978

NASTRAN general purpose interface requirements document

This NASTRAN (NASA STRuctural ANalysis) General Purpose Interface Requirements Document (IRD) defines standards for deliverables required of New Capability Contractors (NCCs) and relates these deliverables to the software development cycle. It also defines standards to be followed by NCCs for adding to and modifying the code in the NASTRAN software system and for adding to and modifying the four official NASTRAN manuals: The NASTRAN Theoretical Manual, the NASTRAN User's Manual, The NASTRAN Programmer's Manual, and The NASTRAN Demonstration Problem Manual. It is intended that this General Purpose IRD shall be incorporated by reference in all contracts for a new NASTRAN capability.

Brown, W. K.↗

NASA NTRS2004

Automated Static Culture System Cell Module Mixing Protocol and Computational Fluid Dynamics Analysis

This report is a documentation of a fluid dynamic analysis of the proposed Automated Static Culture System (ASCS) cell module mixing protocol. The report consists of a review of some basic fluid dynamics principles appropriate for the mixing of a patch of high oxygen content media into the surrounding media which is initially depleted of oxygen, followed by a computational fluid dynamics (CFD) study of this process for the proposed protocol over a range of the governing parameters. The time histories of oxygen concentration distributions and mechanical shear levels generated are used to characterize the mixing process for different parameter values.

Kleis, Stanley J.↗

NASA NTRS1983

Space station needs, attributes, and architectural options: Space station program cost analysis

This report documents the principal cost results (Task 3) derived from the Space Station Needs, Attributes, and Architectural Options study conducted for NASA by the McDonnell Douglas Astronautics Company. The determined costs were those of Architectural Options (Task 2) defined to satisfy Mission Requirements (Task 1) developed within the study. A major feature of this part of the study was the consideration of realistic NASA budget constraints on the recommended architecture. Thus, the space station funding requirements were adjusted by altering schedules until they were consistent with current NASA budget trends.

Cowls, R. S.↗

NASA NTRS2004

Calculated Drag of an Aerial Refueling Assembly Through Airplane Performance Analysis

This viewgraph document reviews NASA Dryden's work on Aerial refueling, with specific interest in calculating the drag of the refueling system. The aerodynamic drag of an aerial refueling assembly was calculated during the Automated Aerial Refueling project at the NASA Dryden Flight Research Center. An F/A-18A airplane was specially instrumented to obtain accurate fuel flow measurements and to determine engine thrust

Vachon, Jake↗

NASA NTRS2007

Upward Flame Propagation and Wire Insulation Flammability: 2006 Round Robin Data Analysis

This viewgraph document reviews test results from tests of different material used for wire insulation for flame propagation and flammability. The presentation focused on investigating data variability both within and between laboratories; evaluated the between-laboratory consistency through consistency statistic h, which indicates how one laboratory s cell average compares with averages from other labs; evaluated the within-laboratory consistency through the consistency statistic k, which is an indicator of how one laboratory s within-laboratory variability compares with the variability of other labs combined; and extreme results were tested to determine whether they resulted by chance or from nonrandom causes (human error, instrument calibration shift, non-adherence to procedures, etc.)

Hirsch, David B.↗

NASA NTRS2009

Reaction Wheel Disturbance Model Extraction Software - RWDMES

The RWDMES is a tool for modeling the disturbances imparted on spacecraft by spinning reaction wheels. Reaction wheels are usually the largest disturbance source on a precision pointing spacecraft, and can be the dominating source of pointing error. Accurate knowledge of the disturbance environment is critical to accurate prediction of the pointing performance. In the past, it has been difficult to extract an accurate wheel disturbance model since the forcing mechanisms are difficult to model physically, and the forcing amplitudes are filtered by the dynamics of the reaction wheel. RWDMES captures the wheel-induced disturbances using a hybrid physical/empirical model that is extracted directly from measured forcing data. The empirical models capture the tonal forces that occur at harmonics of the spin rate, and the broadband forces that arise from random effects. The empirical forcing functions are filtered by a physical model of the wheel structure that includes spin-rate-dependent moments (gyroscopic terms). The resulting hybrid model creates a highly accurate prediction of wheel-induced forces. It accounts for variation in disturbance frequency, as well as the shifts in structural amplification by the whirl modes, as the spin rate changes. This software provides a point-and-click environment for producing accurate models with minimal user effort. Where conventional approaches may take weeks to produce a model of variable quality, RWDMES can create a demonstrably high accuracy model in two hours. The software consists of a graphical user interface (GUI) that enables the user to specify all analysis parameters, to evaluate analysis results and to iteratively refine the model. Underlying algorithms automatically extract disturbance harmonics, initialize and tune harmonic models, and initialize and tune broadband noise models. The component steps are described in the RWDMES user s guide and include: converting time domain data to waterfall PSDs (power spectral densities); converting PSDs to order analysis data; extracting harmonics; initializing and simultaneously tuning a harmonic model and a wheel structural model; initializing and tuning a broadband model; and verifying the harmonic/broadband/structural model against the measurement data. Functional operation is through a MATLAB GUI that loads test data, performs the various analyses, plots evaluation data for assessment and refinement of analysis parameters, and exports the data to documentation or downstream analysis code. The harmonic models are defined as specified functions of frequency, typically speed-squared. The reaction wheel structural model is realized as mass, damping, and stiffness matrices (typically from a finite element analysis package) with the addition of a gyroscopic forcing matrix. The broadband noise model is realized as a set of speed-dependent filters. The tuning of the combined model is performed using nonlinear least squares techniques. RWDMES is implemented as a MATLAB toolbox comprising the Fit Manager for performing the model extraction, Data Manager for managing input data and output models, the Gyro Manager for modifying wheel structural models, and the Harmonic Editor for evaluating and tuning harmonic models. This software was validated using data from Goodrich E wheels, and from GSFC Lunar Reconnaissance Orbiter (LRO) wheels. The validation testing proved that RWDMES has the capability to extract accurate disturbance models from flight reaction wheels with minimal user effort.

Blaurock, Carl↗

NASA NTRS1993

Parallel runway requirement analysis study. Volume 2: Simulation manual

This document is a user manual for operating the PLAND_BLUNDER (PLB) simulation program. This simulation is based on two aircraft approaching parallel runways independently and using parallel Instrument Landing System (ILS) equipment during Instrument Meteorological Conditions (IMC). If an aircraft should deviate from its assigned localizer course toward the opposite runway, this constitutes a blunder which could endanger the aircraft on the adjacent path. The worst case scenario would be if the blundering aircraft were unable to recover and continue toward the adjacent runway. PLAND_BLUNDER is a Monte Carlo-type simulation which employs the events and aircraft positioning during such a blunder situation. The model simulates two aircraft performing parallel ILS approaches using Instrument Flight Rules (IFR) or visual procedures. PLB uses a simple movement model and control law in three dimensions (X, Y, Z). The parameters of the simulation inputs and outputs are defined in this document along with a sample of the statistical analysis. This document is the second volume of a two volume set. Volume 1 is a description of the application of the PLB to the analysis of close parallel runway operations.

Ebrahimi, Yaghoob S.↗

NASA NTRS1977

Engineering analysis division internal note. OFT-1 margin assessment

The results are documented of an analysis conducted to determine space shuttle vehicle (SSV) subsystem margins for the reference flight profile for the first orbital flight test (OFT-1). In general, the results show increased margins for the OFT-1 indicators when compared to Mission 3A resutls. The inclusion of element and wing aerodynamic variations on OFT-1, in combination with winds and systems dispersions, resulted in the forward Z (FTO1) attach load indicator exceeding specified limits. The inboard and outboard elevon hinge moment margins (9 percent and 3 percent, respectively) on OFT-1 reflect values consistent with the load relief requirements dictated by elevon hinge moment variations. All other structural load indicators for OFT-1 had margins in excess of 10 percent. The SSV first stage stagnation heating indicators for OFT-1 were about 45 percent less than for Mission 3A. The hydraulic systems demands for both missions were essentially the same. The results also show OFT-1 performance requirements from the consideration of winds and dispersions to be approximately 3,300 lbs greater than Mission 3A.

Austin, L. D., Jr.↗

NASA NTRS1986

Independent Orbiter Assessment (IOA): Analysis of the instrumentation subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results for the Instrumentation Subsystem are documented. The Instrumentation Subsystem (SS) consists of transducers, signal conditioning equipment, pulse code modulation (PCM) encoding equipment, tape recorders, frequency division multiplexers, and timing equipment. For this analysis, the SS is broken into two major groupings: Operational Instrumentation (OI) equipment and Modular Auxiliary Data System (MADS) equipment. The OI equipment is required to acquire, condition, scale, digitize, interleave/multiplex, format, and distribute operational Orbiter and payload data and voice for display, recording, telemetry, and checkout. It also must provide accurate timing for time critical functions for crew and payload specialist use. The MADS provides additional instrumentation to measure and record selected pressure, temperature, strain, vibration, and event data for post-flight playback and analysis. MADS data is used to assess vehicle responses to the flight environment and to permit correlation of such data from flight to flight. The IOA analysis utilized available SS hardware drawings and schematics for identifying hardware assemblies and components and their interfaces. Criticality for each item was assigned on the basis of the worst-case effect of the failure modes identified.

Howard, B. S.↗

NASA NTRS2004

Software Safety Analysis of a Flight Guidance System

This document summarizes the safety analysis performed on a Flight Guidance System (FGS) requirements model. In particular, the safety properties desired of the FGS model are identified and the presence of the safety properties in the model is formally verified. Chapter 1 provides an introduction to the entire project, while Chapter 2 gives a brief overview of the problem domain, the nature of accidents, model based development, and the four-variable model. Chapter 3 outlines the approach. Chapter 4 presents the results of the traditional safety analysis techniques and illustrates how the hazardous conditions associated with the system trace into specific safety properties. Chapter 5 presents the results of the formal methods analysis technique model checking that was used to verify the presence of the safety properties in the requirements model. Finally, Chapter 6 summarizes the main conclusions of the study, first and foremost that model checking is a very effective verification technique to use on discrete models with reasonable state spaces. Additional supporting details are provided in the appendices.

Butler, Ricky W.↗