Search NASA⌕ Search

SEARCH · Search NASA

Results for “doping effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Effect of doping of tin on optoelectronic properties of indium oxide: DFT study

Indium tin oxide is widely used transparent conductor. Experimentally observed that 6% tin doping in indium oxide is suitable for optoelectronic applications and more doping beyond this limit degrades the optoelectronic property. The stoichiometry (In{sub 32-x}Sn{sub x}O{sub 48+x/2}; x=0-6) is taken to understand the change in lattice parameter, electronic structure, and optical property of ITO. It is observed that lattice parameter increases and becomes constant after 6% tin doping that is in good agreement of the experimental observation. The electronic structure calculation shows that the high tin doping in indium oxide adversely affects the dispersive nature of the bottom of conduction band of pure indium oxide and decreases the carrier mobility. Optical calculations show that transmittance goes down upto 60% for the tin concentration more than 6%. The present paper shows that how more than 6% tin doping in indium oxide adversely affects the optoelectronic property of ITO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

To study the effect of doping concentration of silver on structural and optical properties of cadmium oxide (CdO) nanostructure

The present work deals with study of structural and optical properties of Silver (Ag) doped Cadmium oxide (CdO) nanostructured synthesized by Chemical Co-precipitation Techniques followed by calcinations at small temperature. The doping concentrations were changing from 0.1 to 10 at% respectively. Structural analysis study of these calcined materials is carried out by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The optical properties of calcined samples were investigating by Fourier transformation infrared (FTIR)spectroscopy, UV-Visible Spectroscopy (UV-Vis). The structural properties analysis results revels that crystallite size are in the range of nano region and TEM results are quite in accordance with XRD results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of doping on electronic properties of HgSe

First principle study of electronic properties of pure and doped HgSe have been performed using all electron Full Potential Linearized Augmented Plane Wave (FP-LAPW) method using ELK code. The electronic exchange and co-relations are considered using Generalized Gradient Approach (GGA). Lattice parameter, Density of States (DOS) and Band structure calculations have been performed. The total energy curve (Energy vs Lattice parameter), DOS and band structure calculations are in good agreement with the experimental values and those obtained using other DFT codes. The doped material is studied within the Virtual Crystal Approximation (VCA) with doping levels of 10% to 25% of electrons (hole) per unit cell. Results predict zero band gap in undopedHgSe and bands meet at Fermi level near the symmetry point Γ. For doped HgSe, we found that by electron (hole) doping, the point where conduction and valence bands meet can be shifted below (above) the fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of doping and heat treatment on the mechanical parameters of ZnSe{sub (1-x)}Te{sub x} crystals grown from the melt

The mechanical properties of crystals of ZnSe{sub (1-x)}Te{sub x} (0 < x < 1.3 wt %) solid solutions are investigated using the indentation method. The breaking points of doped and undoped crystals are measured by the uniaxial compression method. It is revealed that the microhardness anisotropy coefficient for crystals with a tellurium dopant content of {approx}0.3 wt % is equal to unity. A change in the tellurium content in the solid solutions from 0.2 to 1.3 wt % leads to a linear increase in the microhardness by 23%. The brittle strength of the ZnSe and ZnSe{sub (1-x)}Te{sub x} crystals varies in a similar manner. It is demonstrated that heat treatment and the presence of interblock boundaries affect the ultimate strength and the cracking resistance of the ZnSe{sub (1-x)}Te{sub x} crystals. This is an important factor which should be taken into account in mechanical treatment of the materials under investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Static and dynamic double-exchange effects in doped manganites

It is shown that antiferromagnetic ordering in doped manganites with strong double-exchange interaction is transformed into ferromagnetic canted ordering with residual antiferromagnetic behavior in the basal plane as a result of hopping of mobile electron. The canting angle between the core magnetiztions is controlled by the competition of the Heisenberg antiferromagnetic exchange and double exchange. The temperatures of the paramagnet-antiferromagnet and paramagnet-canted ferromagnetic phase transitions are calculated. The results on the dependence of the magnetization in the canted phase and critical temperatures on the doping degree are in qualitative agreement with experiment. The form of uniform oscillations of core magnetiztions in the canted ferromagnetic phase of a doped manganite sample with hopping conduction is analyzed with and without allowance for relaxation of mobile electrons to the lattice. We propose a mechanism for the ferromagnetic resonance broadening and its resonance frequency shift in a ferromagnetic conducting sample (hopping conduction) of doped manganite due to double exchange. The resonance frequency shift and the ferromagnetic resonance damping constant (linewidth) are calculated in this model. In contrast to other relaxation mechanisms, the model is based on the fact that mobile electrons rapidly relax to the lattice (over a time on the order of the precession period).

36 MATERIALS SCIENCE↗

Studying the Effect of Doping with Nickel on Silicon-Based Solar Cells with a Deep p–n-Junction

It has been shown that the doping of the front side of a solar cell with a deep-level p–n junction with nickel atoms increases short-circuit current density J{sub sc} by 89% and open-circuit voltage V{sub oc} by 19.7%. Additional thermal treatment at 700°C for 1 h increases J{sub sc} by 98.4% and V{sub oc} by 13.18%. It is presumed that the IR radiation conversion efficiency grows because nickel atoms form clusters, these being getter centers for uncontrolled recombinant impurities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation tolerant polymeric films through the incorporation of small molecule dopants in the polymer matrix

Radiation induced conductivity (RIC) in semicrystalline polyethylene terephthalate (PET) films can be reduced by incorporating small molecule electron traps into the polymer. The electron traps contained an aromatic core with strong electron withdrawing functionality pendant to the core and were incorporated into the PET film by immersing the polymer in a solution of dopant and solvent at elevated temperatures. The chemical functionality of the electron trapping molecule and the number of pendant functional groups had a strong impact on the equilibrium doping level and the most effective doping solvent. In addition, all of the electron traps exhibited effectiveness at reducing the RIC. The technique of incorporating small molecule dopants into the polymer matrix in order to reduce the RIC can potentially be exploited with other polymers films and coatings utilized in electronics devices such as encapsulants, conformal coatings, and polymeric underfills.

36 MATERIALS SCIENCE↗

Defect Study of Group V Doped CdTe By Thermoelectric Effect Spectroscopy

Shallow acceptors in single crystal CdTe induced by Group V (P, As, and Sb) doping are identified by thermoelectric effect spectroscopy (TEES). Understanding defects in Group V doped CdTe is critical to improving and controlling the acceptor density and lifetime in the absorber material which is an important factor determining the open circuit voltage and efficiency in CdTe solar cells.

14 SOLAR ENERGY↗

Annealing of self-assembled InAs/GaAs quantum dots: A stabilizing effect of beryllium doping

We investigated the effects of postgrowth thermal annealing on optical properties of beryllium-doped InAs quantum dot (QD) heterostructures grown by molecular beam epitaxy. Thermal annealing induced a blueshift of up to 200 meV in light emission from an undoped sample, while a sample having GaAs layer heavily doped with beryllium on top of the QD region exhibited a much smaller blueshift. This phenomenon is interpreted as due to suppression of annealing-induced In/Ga interdiffusion.

36 MATERIALS SCIENCE↗

High temperature operation to 500 °C of AlGaN graded polarization-doped field-effect transistors

AlGaN polarization-doped field-effect transistors were characterized by DC and pulsed measurements from room temperature to 500 °C in ambient. DC current-voltage characteristics demonstrated only a 70% reduction in on-state current from 25 to 500 °C and full gate modulation, regardless of the operating temperature. Near ideal gate lag measurement was realized across the temperature range that is indicative of a high-quality substrate and sufficient surface passivation. The ability for operation at high temperature is enabled by the high Schottky barrier height from the Ni/Au gate contact, with values of 2.05 and 2.76 eV at 25 and 500 °C, respectively. The high barrier height due to the insulatorlike aluminum nitride layer leads to an ION/IOFF ratio of 1.5 × 10 9 and 6 × 10 3 at room temperature and 500 °C, respectively. Transmission electron microscopy was used to confirm the stability of the heterostructure even after an extended high-temperature operation with only minor interdiffusion of the Ni/Au Schottky contact. The use of refractory metals in all contacts will be key to ensure a stable extended high-temperature operation.

36 MATERIALS SCIENCE↗

The effect of boron doping on crystal structure, magnetic properties and magnetocaloric effect of DyCo 2

In this study, the magnetic properties and magnetic entropy changes of DyCo 2 B x (x=0, 0.05, 0.1, and 0.2) alloys were investigated. The Curie temperature (TC) increases with increasing B concentration. The frequency dependence of ac magnetic susceptibility of DyCo 2 caused by the narrow domain wall pinning effect is depressed by B doping, but the coercivity and the magnetic viscosity are prominently increased in the B doped alloys. The magnetic transition nature of DyCo 2 B x changes from the first-order to the second-order with increasing x, which leads to the decrease of the maximum magnetic entropy change. However, the relative cooling power (RCP) of DyCo 2 and the B doped alloys remains nearly constant.

36 MATERIALS SCIENCE↗

Introducing Solubility Control for Improved Organic P-Type Dopants

To overcome the poor solubility of the widely used p-type dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), we have synthesized a series of structure-modified, organic p-type dopants to include alkyl ester groups designed to enable solubility and miscibility control. UV–vis–NIR and cyclic voltammetry measurements show increased solubility of mono- and diester substituted dopants with only modest changes to acceptor strength. Using absorption spectroscopy, photoluminescence, and in-plane conductivity measurements, we demonstrate that the new dopants can successfully p-type dope poly(3-hexylthiophene- 2,5-diyl) (P3HT). Monoester substituted dopants are characterized by only slightly reduced electron affinity relative to F4TCNQ, but greater doping effectiveness due to increased miscibility with P3HT. Diester substituted dopants undergo a dimerization reaction before assuming their doped states, which may help anchor dopants into position post deposition, thus decreasing the negative effect of dopant drift and diffusion. Here, we conclude that increased dopant solubility/miscibility increases the overall effectiveness of doping in solution-cast polymer films and that ester modification is a practical approach to achieving solubility/miscibility control in TCNQ-type dopants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

P-Type Doping of Mixed Tin–Lead Halide Perovskites Using Electron Transfer to Mo(tfd-COCF3) 3 and F 4 TCNQ

Mixed tin-lead halide perovskites are emerging as promising candidates to address the toxicity issues of lead-based perovskites and to provide additional bandgap tunability for optoelectronic applications. Electron-transfer doping offers a prospective pathway to modulate electronic properties of metal-halide perovskites, while not disturbing the underlying crystal structure. However, limited research exists comparing molecular dopants for these systems. Here, our study investigates the p-type electron-transfer doping of the mixed tin-lead halide perovskite MAPb 0.5 Sn 0.5 I 3 (MA = methylammonium) using a sequential deposition approach (perovskite film followed by dopant incorporation) and the molecular dopants F 4 TCNQ and Mo(tfd-COCF 3 ) 3 . Up to 3 orders of magnitude higher carrier density and up to 2 orders of magnitude greater conductivity are achieved relative to the undoped samples, with F 4 TCNQ and Mo(tfd-COCF 3 ) 3 demonstrating similar doping efficiencies (associated with the ratio of mobile charges added to the number of dopant molecules incorporated) of 0.031(3) % and 0.024(3) %, respectively. Differences in the doping effectiveness for a given molarity doping solution likely follow from variations in dopant incorporation within the film during the spin coating deposition step.

14 SOLAR ENERGY↗

Elaboration of m-cresol polyamide12/ polyaniline composite films for antistatic applications

The present work deals with the preparation of transparent antistatic films from an extreme dilution of an intrinsically conducting polymer (ICP) with not coloured polymers. Our approach is based on the chemical polymerization of a very thin layer of Polyaniline (PANI) around particles of an insulating polymer (PA12). Films were obtained by dissolving the synthesized core-shell particles in m-Cresol. The electric property and structure relationships were investigated by using dielectric relaxation spectroscopy, X-ray diffraction and micro-Raman spectroscopy. Composite films exhibited a well established dc conductivity over all the frequency range for 10 wt. % of PANI concentration related to the conductive properties of the PANI clusters. X-ray diffraction data show broader and lower intensity of PA12 peaks when increasing PANI content, probably due to the additional doping effect of m- cresol. The doping of PA12/PANI films with Dodecyl benzene sulfonic acid (DBSA) was unequivocally verified by Raman spectroscopy.

36 MATERIALS SCIENCE↗