Search NASA⌕ Search

SEARCH · Search NASA

Results for “dots”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Probing the Origin of the Open Circuit Voltage in Perovskite Quantum Dot Photovoltaics

Perovskite quantum dots (PQDs) have many properties that make them attractive for optoelectronic applications, including expanded compositional tunability and crystallographic stabilization. While they have not achieved the same photovoltaic (PV) efficiencies of top-performing perovskite thin films, they do reproducibly show high open circuit voltage (VOC) in comparison. Further understanding of the VOC attainable in PQDs as a function of surface passivation, contact layers, and PQD composition will further progress the field and may lend useful lessons for non-QD perovskite solar cells. Here, we use photoluminescence-based spectroscopic techniques to understand and identify the governing physics of the VOC in CsPbI3 PQDs. In particular, we probe the effect of the ligand exchange and contact interfaces on the VOC and free charge carrier concentration. The free charge carrier concentration is orders of magnitude higher than in typical perovskite thin films and could be tunable through ligand chemistry. Tuning the PQD A-site cation composition via replacement of Cs+ with FA+ maintains the background carrier concentration but reduces the trap density by up to a factor of 40, reducing the VOC deficit. These results dictate how to improve PQD optoelectronic properties and PV device performance and explain the reduced interfacial recombination observed by coupling PQDs with thin-film perovskites for a hybrid absorber layer.

perovskite quantum dot↗
DOE OSTI2024

Graphitic Carbon Nitride Quantum Dots (g‐C 3 N 4 QDs): From Chemistry to Applications

Since their emergence in 2014, graphitic carbon nitride quantum dots (g-C 3 N 4 QDs) have attracted much interest from the scientific community due to their distinctive physicochemical features, including structural, morphological, electrochemical, and optoelectronic properties. Owing to their desirable characteristics, such as non-zero band gap, ability to be chemically functionalized or doped, possessing tunable properties, outstanding dispersibility in different media, and biocompatibility, g-C 3 N 4 QDs have shown promise for photocatalysis, energy devices, sensing, bioimaging, solar cells, optoelectronics, among other applications. As these fields are rapidly evolving, it is very strenuous to pinpoint the emerging challenges of the g-C 3 N 4 QDs development and application during the last decade, mainly due to the lack of critical reviews of the innovations in the g-C 3 N 4 QDs synthesis pathways and domains of application. Herein, an extensive survey is conducted on the g-C 3 N 4 QDs synthesis, characterization, and applications. Scenarios for the future development of g-C 3 N 4 QDs and their potential applications are highlighted and discussed in detail. In conclusion, the provided critical section suggests a myriad of opportunities for g-C 3 N 4 QDs, especially for their synthesis and functionalization, where a combination of eco-friendly/single step synthesis and chemical modification may be used to prepare g-C 3 N 4 QDs with, for example, enhanced photoluminescence and production yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A review of radiation-induced damage to quantum dots

Quantum dots (QDs) are versatile nano structures that have applications in many fields of research and production, including biosensor technology, computing, photovoltaics, and optoelectronics. QDs have gained interest in the field of radiation detection because of their relative ease of production, tunable photoluminescence, and sensitivity to ionizing radiation. The photoluminescent properties of QDs diminish proportionally to prolonged ionizing radiation interactions, leading many groups to seek out these materials as potential candidates for the next generation of inexpensive, easily manufactured dosimetry and sensors. To use QDs in these applications, the mechanisms of radiation damage to the nanomaterial must be clearly understood and characterized. Herein, we review the study of ionizing radiation damage to QDs. First, the synthesis and properties of QDs are briefly discussed. Next, the radiation damage to QDs due to heavy charged particles, fast electrons, high energy photons, and neutrons are detailed. After this, experimental methods and modelling of QDs in radiation environments are examined. Lastly, future research directions are provided. The goal of this review is to aid in understanding the ionizing radiation effects on QD-based devices.

Snow, Jesse [University of Utah, Salt Lake City, U↗
DOE OSTI2024

Unraveling the Growth Mechanism of Strongly Confined CsPbBr 3 Perovskite Quantum Dots under Thermodynamic Equilibrium Control

Size-confined lead halide perovskite quantum dots (PQDs) are promising materials for optoelectronic devices. Large quantities of PQDs with high ensemble uniformity are often needed for device fabrication. The thermodynamic-equilibrium-controlled synthesis can produce PQDs with good size and shape uniformity. Unfortunately, scaling up this synthesis often produces unwanted perovskite nanoplatelets (NPLs). To date, the PQD and NPL growth mechanism under thermodynamic equilibrium control remains unexplored. We discovered that the growth of size-confined CsPbBr 3 PQDs is mediated by ultrasmall (~ 2.4 nm) metastable nanoclusters. These nanoclusters can eventually grow into PQDs when sufficient Cs-precursors are provided. Otherwise, the unreacted nanoclusters will self-assemble and fuse into NPLs during the synthesis and/or PQD purification. Furthermore, by controlling the homogeneous growth of nanoclusters, strongly confined (≤ 5 nm) PQDs with high size uniformity can be produced at the gram scale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

One Pot Synthesis of Cyan Emitting CdZnSSe Quantum Dots for Human Centric Lighting

A one pot synthesis of blue and green emissive CdZnSSe quantum dots (QDs) from thio- and selenoureas and Cd and Zn carboxylates is optimized using high throughput robotic optimization. A large set of spectral data (N = 192) is used to train machine learning models that accurately predict the photoluminescence emission wavelength (λmax) and full-width half-maximum, and the relative photoluminescence quantum yield (PLQY) from the S:Se and Zn:Cd stoichiometries and reaction time. ZnS shells are deposited on the crude QD heterostructures using 4-tert-butylbenzyl mercaptan, a more reactive source of sulfide that enables shell growth below the temperature where ion diffusion in the QD can broaden its optical spectrum (≤275 °C). These optimized procedures provide gram quantities of blue-green emitting QDs (PLQY = 85–99%) in a single reaction vessel. A solid state lighting device (4260 K) that incorporates cyan emissive QDs achieved a higher luminous efficacy of 179 lm/W and melanopic daylight efficiency ratio (0.71) than existing commercial human centric lighting devices.

Jordan, Abraham J↗
DOE OSTI2026

Graphene Quantum Dot Composites Embedded with CoZn Alloy Nanoparticles for Enhanced Oxygen Reduction and Evolution Reactions

Developing efficient and durable electrocatalysts for oxygen reduction (ORR) and oxygen evolution reactions (OER) is crucial for energy conversion technologies. In this study, core–shell graphene quantum dot (GQD) composites embedded with Co, Zn, and CoZn alloy nanoparticles were synthesized using a solid-state microwave synthesis method and systematically investigated for their electrochemical performance. The structural and compositional analyses confirm that the integration of transition metal nanoparticles enhances the electronic properties of GQDs, providing abundant active sites and facilitating charge transfer. Electrochemical characterization reveals that GQD-CoZn-3 (GQD:Co:Zn = 10.5:0.5:0.5) exhibits superior ORR and OER catalytic activities, achieving the highest current densities of 205 A g–1 and 102 A g–1 at 100 mV s–1, respectively. These performance values surpass those of pristine GQDs and single-metal (Co or Zn) embedded counterparts, emphasizing the strong synergistic effect between the CoZn alloy and the functionalized carbon framework. Impedance measurements further reveal a substantial reduction in charge-transfer resistance, while chronoamperometry tests demonstrate excellent catalytic stability and CO tolerance, highlighting the robustness of the core–shell GQD structure. These findings provide valuable insights into the design of advanced carbon-based electrocatalysts for energy applications.

Panda, Pradeep Kumar↗
DOE OSTI2026

Interfacial Charge Transfer in Lead Sulfide/Cadmium Sulfide Quantum Dot–Monolayer Molybdenum Disulfide Heterostructures

We investigate the ultrafast interfacial charge transfer dynamics in mixed-dimensional PbS/CdS quantum dot (QD)–monolayer MoS 2 heterostructures exhibiting a type-II band alignment. These 0D–2D heterostructures were assembled using oleic acid-capped PbS/CdS QDs with systematically varied core sizes deposited onto molecular beam epitaxy-grown monolayer MoS 2 . Steady-state and time-resolved optical spectroscopies revealed pronounced bidirectional charge transfer between the 0D and 2D components, involving both electron and hole exchange across the interface. The quenching of the monolayer MoS 2 A-exciton bleach and the modifications of its decay dynamics provide direct evidence for efficient hole transfer from photoexcited MoS 2 into the PbS QD core. Concurrently, attenuation of the QD ground-state bleach and the emergence of ultrafast decay components confirmed electron transfer from photoexcited QDs to monolayer MoS 2 . Both hole and electron transfer processes are dependent on the QD core size, with smaller cores enabling faster transfer rates and higher efficiencies due to enhanced band offsets and interfacial coupling. The complementary insights gained from transient absorption and time-resolved photoluminescence measurements clarify the mechanisms governing interfacial carrier exchange and highlight the importance of both hole and electron transfer as key components in the functioning of such 0D–2D heterostructures. This study underscores the potential of 0D–2D semiconductor heterostructures for advanced optoelectronic and light-energy conversion applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nitrogenated Graphene Quantum Dot-Derived Copper Single-Atom Catalyst for Oxygen Reduction Reaction

Despite the promise of fuel cells as sustainable energy conversion technologies, their widespread adoption is hindered by the high cost of platinum group metal (PGM) catalysts, particularly for catalyzing the oxygen reduction reaction (ORR) at the cathode. Here, we report copper-based single-atom catalysts (Cu-SACs) as cost-effective non-PGM alternatives for ORR. The catalysts were synthesized via simple pyrolysis of pyrene-derived amine-terminated graphene quantum dots (GQDs) in the presence of nitrogen and metal precursors. The abundant nitrogen functionality in GQDs effectively stabilized isolated Cu atoms during their conversion to porous carbon. A subsequent acid-washing step yielded a high density of atomically dispersed Cu active sites. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and high-resolution scanning transmission electron microscopy (HR-STEM) confirmed the effective incorporation of isolated Cu atoms into the carbon matrix through copper–nitrogen (Cu-N) coordination. Electrochemical measurements revealed excellent ORR activity with a dominant four-electron pathway. This synthetic strategy provides a practical route to developing economically viable, non-precious metal catalysts.

catalysts↗
DOE OSTI2025

Colloidal Germanium Quantum Dots with Broadly Tunable Size and Light Emission

Germanium (Ge) colloidal quantum dots (CQDs) were synthesized by thermal decomposition of GeI 2 using capping ligand mixtures of oleylamine (OAm), octadecene (ODE), and trioctylphosphine (TOP). Average diameters could be tuned across a wide range, from 3 to 18 nm, by adjusting reactant concentrations, heating rates, and reaction temperatures. OAm promotes decomposition of GeI 2 to Ge and serves as a weakly bound capping ligand. ODE displaces OAm during the reaction to terminate particle growth and prevent surface oxidation. TOP is necessary for obtaining nanocrystals larger than 11 nm. In conclusion, the Ge CQDs have relatively narrow size distributions and exhibit size-dependent, band-edge photoluminescence (PL), with peak energies from 0.8 to 1.34 eV, across a wide spectral range in the infrared (IR).

Noh, Jungchul [Univ. of Texas, Austin, TX (United ↗
DOE OSTI2024

Strain-graded quantum dots with spectrally pure, stable and polarized emission

Structural deformation modifies the bandgap, exciton fine structure and phonon energy of semiconductors, providing an additional knob to control their optical properties. The impact can be exploited in colloidal semiconductor quantum dots (QDs), wherein structural stresses can be imposed in three dimensions while defect formation is suppressed by controlling surface growth kinetics. Yet, the control over the structural deformation of QDs free from optically active defects has not been reached. Here, we demonstrate strain-graded CdSe-ZnSe core-shell QDs with compositionally abrupt interface by the coherent pseudomorphic heteroepitaxy. Resulting QDs tolerate mutual elastic deformation of varying magnitudes at the interface with high structural fidelity, allowing for spectrally stable and pure emission of photons at accelerated rates with near unity luminescence efficiency. We capitalize on the asymmetric strain effect together with the quantum confinement effect to expand emission envelope of QDs spanning the entire visible region and exemplify their use in photonic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Non-equilibrium entropy production and information dissipation in a non-Markovian quantum dot

This study measures trajectory-level entropy production and information dissipation in a driven, non-Markovian quantum dot using time-resolved optical dynamics and machine-learning-based analysis. Although not a 2D-material system, it is relevant because it demonstrates quantitative extraction of nonequilibrium dynamics from nanoscale optical fluctuations, which is conceptually connected to the proposed studies of transient charge and spin dynamics at interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Spatial quantum-interference landscapes of multi-site-controlled quantum dots coupled to extended photonic cavity modes

Abstract A compact platform to integrate emitters in a cavity-like support is to embed quantum dots (QDs) in a photonic crystal (PhC) structure, making them promising candidates for integrated quantum photonic circuits. The emission properties of QDs can be modified by tailored photonic structures, relying on the Purcell effect or strong light-matter interactions. However, the effects of photonic states on spatial features of exciton emissions in these systems are rarely explored. Such effect is difficult to access due to random positions of self-assembled QDs in PhC structures, and the fact that quantum well excitons’ wavefunctions resemble photonic states in a conventional distributed Bragg reflector cavity system. In this work, we instead observe a spatial signature of exciton emission using site-controlled QDs embedded in PhC cavities. In particular, we observe the detuning-dependent spatial repulsion of the QD exciton emissions by polarized imaging of the micro-photoluminescence, dependent on the controlled QD’s position in a spatially extended photonic pattern. The observed effect arises due to the quantum interference between QD decay channel in a spatially-extended cavity mode. Our findings suggest that integration of site-controlled QDs in tailored photonic structures can enable spatially distributed single-photon sources and photon switches.

Physics↗
DOE OSTI2025

Efficient single-photon emission via quantum-confined charge funneling to quantum dots

Quantum light sources, particularly single-photon emitters (SPEs), are critical for quantum communications and computing. Among them, III-V semiconductor quantum dots (QDs) have demonstrated superior SPE metrics, including near-unity brightness, high photon purity, and indistinguishability, making them especially suitable for quantum applications. However, their overall quantum efficiency—determined by a product of the internal, excitation, and outcoupling efficiencies—remains limited, primarily due to low (typically below 0.1%) excitation efficiency. To mitigate the low efficiency under non-resonant pumping, here we realize liquid droplet etched GaAs QDs in a microscale 3D AlGaAs charge-carrier funnel. The funnel channels charge carriers to the QD and enhances the overall emission efficiency by over one order of magnitude while preserving the SPE behavior. We reveal that a modified energy landscape around the QD leads to the excitation efficiency improvement. These energy landscape-modified QDs can be operated with optical excitation up to 10 μm away, raising the promise of efficient electrically driven QD SPEs for quantum information systems.

Park, Sanghyeok [Sandia National Laboratories (SNL↗