SEARCH · Search NASA

Results for “dynamic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Aliovalent Anion Incorporation in Halide Na-ion Conductors for Enhanced Ionic Conductivity

Halide-based solid electrolytes (SEs), particularly zirconium (Zr)-centered halides, are attractive from a material cost perspective. Nevertheless, Zr-centered halide SEs are hindered by their low ionic conductivity. Here, in this study, we report on the cubic Na 3 ZrCl 5 S superionic conductor through strategic sulfur anion incorporation, achieving 10 times higher ionic conductivity than that of Na 2 ZrCl 6 . With the optimal composition, the highest ionic conductivity of 0.753 mS cm –1 is obtained for the 0.6Na 2 S–1.4NaCl–ZrCl 4 compound. When paired with a NaCrO 2 cathode, the assembled all-solid-state batteries (ASSBs) achieve a specific discharge capacity of 110 mA h g –1 at 0.1C and exhibit long-term cycling stability at 0.3C at room temperature over 1000 cycles (with 83% capacity retention). Moreover, in situ electrochemical impedance spectroscopy combined with distribution of relaxation times analysis reveal the dynamically interfacial stability between Na halide with electrodes. In conclusion, this work highlights the design and synthesis of advanced halide electrolytes through anion incorporation, paving the way for the development of next-generation ASSBs.

Guo, Xiaolin [Univ. of Louisville, KY (United Stat↗

DOE OSTI2025

Ionospheric Disturbances in GNSS TEC Data: SpaceX Falcon 9 Deorbit Maneuvers Over CONUS in April–May 2024

Traveling ionospheric disturbances (TIDs) driven by a large number of internal and external sources are detectable with dense networks of ground‐based Global Navigation Satellite System (GNSS) receivers' measurements of total electron content (TEC). We present the newly developed System for Rapid Analysis of Ionospheric Dynamics (S‐RAID), providing data and visual GNSS TEC products of TIDs of periods ~2–120 min and horizontal resolution up to tens of kilometers for years 2017–2024. The S‐RAID data reveal myriad natural and anthropogenic TIDs from meteorology and space weather, and from human spaceflight activities. In this report, we focus on new prominent disturbances found during SpaceX second stage deorbit maneuvers in April–May 2024. Signatures include waves emanating from the Falcon's trajectory above California and depletions following its deorbit and passage over Arizona. These findings suggest further opportunities to detect and quantify small‐scale events in the ionosphere as well as to understand the responses of the atmosphere‐ionosphere system to known inputs.

58 GEOSCIENCES↗

DOE OSTI2025

A unified ensemble soil moisture dataset across the continental United States

Abstract A unified ensemble soil moisture (SM) package has been developed over the Continental United States (CONUS). The data package includes 19 products from land surface models, remote sensing, reanalysis, and machine learning models. All datasets are unified to a 0.25-degree and monthly spatiotemporal resolution, providing a comprehensive view of surface SM dynamics. The statistical analysis of the datasets leverages the Koppen-Geiger Climate Classification to explore surface SM’s spatiotemporal variabilities. The extracted SM characteristics highlight distinct patterns, with the western CONUS showing larger coefficient of variation values and the eastern CONUS exhibiting higher SM values. Remote sensing datasets tend to be drier, while reanalysis products present wetter conditions. In-situ SM observations serve as the basis for wavelet power spectrum analyses to explain discrepancies in temporal scales across datasets facilitating daily SM records. This study provides a comprehensive soil moisture data package and an analysis framework that can be used for Earth system model evaluations and uncertainty quantification, quantifying drought impacts and land–atmosphere interactions and making recommendations for drought response planning.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Traceable and Scalable Food Balance Sheets from Agricultural Commodity Supply and Utilization Accounts (2010–2022)

Abstract The Food Balance Sheets (FBS), compiled by the Food and Agriculture Organization (FAO), serve as a cornerstone dataset for studies on agricultural development, food security, and dietary health, providing a broad overview of global and regional food systems. However, its limited transparency and scalability hinder its application in empirical analysis and multisector dynamic modeling. Here, we present a traceable Food Balance Sheets (T-FBS) dataset, developed from detailed Supply Utilization Accounts (SUA) using a novel Primary Commodity equivalent (PCe) aggregation approach. This framework enables the aggregation of commodity flows along supply chains while ensuring consistency and balance across multiple dimensions. The T-FBS dataset includes 57 PCe commodities across 195 regions for the period 2010–2022, consolidated from over 500 SUA products. While T-FBS closely aligns with FAO-FBS at aggregate levels for dietary energy and macronutrients, it identifies key uncertainties in other elements (e.g., feed, trade, stocks). By enhancing methodological transparency, traceability, and scalability, T-FBS strengthens the robustness of food system studies and fosters future research and collaboration within the open-source community.

agriculture↗

DOE OSTI2025

Electron transport in a tokamak scrape-off layer: impact of toroidal nonuniformities of divertor targets

An analysis of electron dynamics is carried out in the tokamak scrape-off layer (SOL) region. Small non-axisymmetric perturbations of the divertor target sheath potential affect electron drift orbits in the SOL and may lead to non-ambipolar electron radial transport. The resulting rates of electron convection, diffusion, and mobility are calculated analytically, and the analytic results are compared with direct numerical simulations of electron drift orbits. The proposed mechanism of non-ambipolar electron transport may be relevant to the sustainment of the SOL plasma quasi-neutrality in the ‘heuristic’ model of the SOL width (Eich et al 2011 Phys. Rev. Lett. 107 215001).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Wall conditioning effects of boron powder injection in KSTAR with a tungsten divertor

Boron powder dropped into KSTAR plasmas decreased the radiated power, core electron density, and Z eff , indicating that the ablated and redeposited boron powder helped to condition the plasma-facing surfaces. Visible line emission of oxygen and tungsten were also reduced by 50% (80%) with boron injection into H-mode (L-mode) discharges that used the new KSTAR tungsten monoblock lower divertor. Dynamic particle balance analysis found a negligible difference in the inferred wall pumping rate during the steady portion of the discharges. It is inferred that the observed conditioning effects were principally caused by a reduction in intrinsic impurities as opposed to a reduction in wall recycling. These results are in qualitative agreement with low-Z injected powder experiments across many fusion devices, confirming the utility of low-Z powder injection as a real-time wall conditioning tool.

boron powder injection↗

DOE OSTI2026

Tensor-polarized parton density in the 𝑁 → Δ transition from the large-𝑁 𝑐 light-cone wave function

The tensor-polarized parton density is defined by the forward matrix element of a partonic operator in the 𝑁 → Δ transition. In this work, we investigate it by employing the large-𝑁 𝑐 light-cone wave function derived from the mean-field approach. The mean-field picture is based on low-energy effective dynamics in the large-𝑁 𝑐 limit, where the baryon wave function is formulated in the rest frame. By exploiting the covariance of the mean-field solution, we derive the corresponding large-𝑁 𝑐 light-cone wave function—decomposed unambiguously into 3⁢𝑄 , 5⁢𝑄 , 7⁢𝑄 , and higher Fock components—in the infinite momentum frame. Evaluating the overlap of these wave functions, we derive an overlap representation of the tensor-polarized parton density in the 𝑁 → Δ transition and find that the leading contribution arises from the 5⁢𝑄 Fock sector. This indicates that the tensor-polarized parton density directly probes the genuine 5⁢𝑄 component and is governed by chiral dynamics. Our numerical analysis shows that the 𝑁 → Δ tensor-polarized parton density is suppressed, consistent with standard large-𝑁 𝑐 expectations. Finally, we establish connections among the tensor-polarized parton density, the generalized parton distribution 𝐻 𝑋 , and the energy-momentum tensor form factor 𝐹 4 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Isotopic discrepancy in microscopic fusion of 16 O + 40,48 Ca

We present a detailed comparison of fusion in 16 O + 40,48 Ca within a fully microscopic time-dependent Hartree-Fock framework over sub-, near-, and above-barrier energies. While 16 O + 40 Ca fusion cross sections are reproduced within the available experimental energy range, calculations for the neutron-rich 16 O + 48 Ca system systematically overestimate the measured near-barrier cross sections. The discrepancy persists across the tested energy density functionals, indicating that it is not tied to a particular parametrization. Analysis of the dynamical interaction potentials reveals an outward shift and softening of the barrier region at the lowest collision energies. These results are then compared to a frozen density description where the barrier modifications are absent and the predicted cross sections are brought closer to experiment. Here, this demonstrates that the observed discrepancy is closely linked to dynamical surface rearrangement and isovector effects, and highlights the sensitivity of low-energy fusion to both the structure and dynamics of neutron-rich nuclei. This suggests that limitations in the isovector sector of conventional Skyrme EDFs in describing the structure of 48 Ca, as highlighted by CREX, are also manifested in the fusion dynamics of the 16 O + 48 Ca system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Analyzer-based X-ray phase contrast imaging using the forward-diffracted o-beam in a few-millimetre-thick Bragg-case asymmetrically cut crystal

An analyzer-based X-ray phase contrast imaging experiment employing the forward-diffracted o-beam in a few-millimetre-thick Bragg-case asymmetrically cut analyzer crystal has been implemented and tested in a geometry similar to that used in conventional radiography. The high angular stability requirements were overcome using specially designed crystals and a closed-loop feedback intensity system, monitoring the intensity of the diffracted h-beam. Analyzer-based images (ABis) taken at different angular positions on the forward-diffracted o-beam rocking curve show different contrasts, as expected. However, the ABis did not show sharp borders. This was closely investigated by X-ray topography and Δ d / d mapping and was attributed to the stresses caused by the analyzer crystal's own weight in the bulk. Further investigation of the crystal design using finite element analysis coupled with dynamical theory of X-ray diffraction is envisaged.

Honnicke, Marcelo Goncalves (ORCID:000000033276432↗

DOE OSTI2025

Efficient Streaming Dynamic Mode Decomposition

We propose a reformulation of the streaming dynamic mode decomposition method that requires maintaining a single orthonormal basis, thereby reducing computational redundancy. The proposed efficient streaming dynamic mode decomposition method results in a constant-factor reduction in computational complexity and memory storage requirements. Numerical experiments on representative canonical dynamical systems show that the enhanced computational efficiency does not compromise the accuracy of the proposed method.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Sierra/SD – Theory Manual – 5.22

Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Sierra/SD. For a more detailed description of how to use Sierra/SD, we refer the reader to User’s Manual. Many of the constructs in Sierra/SD are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Sierra/SD are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer_notes manual, the user’s notes and of course the material in the open literature.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Sierra/SD – User's Manual – 5.22

Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high-fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a user’s guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Sierra/SD – User's Manual (V.5.24)

42 ENGINEERING↗

DOE OSTI2025

Sierra/SD – Theory Manual (V.5.24)

42 ENGINEERING↗

DOE OSTI2026

Sierra/SD - Users Manual - 5.28

Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high-fidelity, validated models used in modal, vibration, static and shock analysis. This document provides a user's guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2026

Sierra/SD - Users Manual - 5.30

Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high-fidelity, validated models used in modal, vibration, static and shock analysis. This document provides a user's guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2026

Sierra/SD - Users Manual - 5.32

Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high-fidelity, validated models used in modal, vibration, static and shock analysis. This document provides a user's guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included.

Beale, Dagny Marie [Sandia National Laboratories (↗

DOE OSTI2025

Rancor Integrated Procedure System (RIPS): A Computer-Based Procedure Platform for Advanced Reactor Research

The Rancor Microworld Simulator is a simplified, pressurized water, small modular reactor simulator that includes a multi-unit plant model server, an advanced digital human-machine control interface, and the Rancor Integrated Procedure System (RIPS). Rancor provides a research and development tool that can be used for collecting operator performance data and for prototyping concepts of operations (ConOps) for advanced reactor development. RIPS is meant as a research tool and includes many unique features: (1) RIPS has a robust procedure authoring system. (2) RIPS has the capability to run any of the three IEEE-Std-1786 computer-based procedure types. (3) RIPS can be configured to take on the look and feel of different vendors’ computer-based procedure systems for the purpose of developing and evaluating different ConOps for plant upgrades or new builds. (4) RIPS includes the capability for logging operator procedure use, including integrating procedure logs with Rancor simulator logs, thereby allowing automated data collection of operator scenario runs. (5) RIPS integrates with the Human Unimodel for Nuclear Technology to Enhance Reliability (HUNTER), a dynamic human reliability analysis environment that creates a digital human twin or virtual operator to mimic reactor operator performance. (6) RIPS includes support for automation of plant monitoring and control functions. While RIPS is explicitly built into Rancor, it may also be used with full-scope training simulators. This functionality allows RIPS to be used for existing plants and advanced reactors under development.

99 - GENERAL AND MISCELLANEOUS↗