Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic graph”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Observational determination of the masses of active galactic nuclei

The masses of 24 active galactic nuclei are determined on the basis of published observations, using data on both the X-ray variability and the width of the narrow forbidden lines of O III. The results are presented in tables and graphs, and it is found that the mass estimates based on the X-ray variability are in good agreement with the dynamic masses determined from the O III linewidth when reasonable values are selected for the radius of the region of X-ray origin and when a standard photoionization model is adopted for the line-emitting gas. The O III dynamic masses of Seyfert-2 nuclei are shown to be systematically lower than those predicted by the (delta t)/M(O III) correlation for Seyfert-1 nuclei.

Wandel, A.↗
NASA NTRS1986

On the free vibrations of spinning paraboloids

The dynamic behavior of a spinning linear-elastic paraboloid subject to nonaxisymmetric deformation is investigated analytically, applying the Rayleigh-Ritz procedure described by Utku et al. (1983). Energy-density, strain-displacement, and velocity-displacement expressions are generated; expressions for the generalized strain and position vector are derived; and the discretized dynamic equations are obtained. Numerical results obtained with a computer-program implementation of the method are presented in extensive tables and graphs. The effects of spin rate and bending rigidity and results for the special case of a spinning disk are included.

Shoemaker, W. L.↗
NASA NTRS1995

Experimental results for a hypersonic nozzle/afterbody flow field

This study was conducted to experimentally characterize the flow field created by the interaction of a single-expansion ramp-nozzle (SERN) flow with a hypersonic external stream. Data were obtained from a generic nozzle/afterbody model in the 3.5 Foot Hypersonic Wind Tunnel at the NASA Ames Research Center, in a cooperative experimental program involving Ames and McDonnell Douglas Aerospace. The model design and test planning were performed in close cooperation with members of the Ames computational fluid dynamics (CFD) team for the National Aerospace Plane (NASP) program. This paper presents experimental results consisting of oil-flow and shadow graph flow-visualization photographs, afterbody surface-pressure distributions, rake boundary-layer measurements, Preston-tube skin-friction measurements, and flow field surveys with five-hole and thermocouple probes. The probe data consist of impact pressure, flow direction, and total temperature profiles in the interaction flow field.

Spaid, Frank W.↗
NASA NTRS1991

Ion dynamics in the Venus ionosphere

Measurement data on the ion velocity in the Venus ionosphere (mainly from the Pioneer Venus Orbiter Retarding Potential Analyzer) are summarized, and theoretical models developed to explain them are reviewed. Data and theoretical predictions are compared in extensive graphs and diagrams and discussed in detail. It is shown that the predominant flow is away from the subsolar point, at up to 3 km/sec in the terminator region. A model of axisymmetric flow based on momentum, energy, and mass conservation laws is found to reproduce the observed ion velocities at solar zenith angles less than about 140 deg, but not the high velocities and chaotic behavior seen near the antisolar point. Also discussed are significant differences between the flow above and below about 400 km and the effects of changes in the dynamic pressure of the solar wind.

Miller, K. L.↗
DOE OSTI2025

System Engineers and Decisions: It?s All about Knowledge

In order to guarantee that a system meets adequate levels of reliability and availability, system performances are continuously monitored and analyzed thanks to the technological advancements driving the Industry 4.0 revolution. An Industry 4.0 approach is typically based on advanced statistical, big data mining, machine learning, and internet-of-things methods designed to detect anomalies in the behavior of system, detect the most likely failure modes, and provide indications to system engineers on when maintenance activities should be performed before system performance are deemed unacceptable (which can be generated by diagnostic and prognostic methods). However, these analyses, which are designed to automatize and increase the efficacy of the system maintenance program, require large amount of data which can come in various forms: numeric, textual, images, sounds etc. Such data constitutes the historic knowledge benchmark to track system performances and support system engineer decisions. Here we claim that data is not sufficient to support this kind of analyses when applied to systems characterized by complex architectures and behaviors. Robust system engineer decisions require the ability to understand the system operational context that lies behind the observed data elements. In this respect, system models are in fact necessary to “put data in context” and capture relationships between data elements. Industry 4.0 methods require in fact contextual knowledge as a basis upon which hypotheses can be generated and assumptions tested. In our view, for complex systems, model-based system engineering (MBSE) models can afford this contextual knowledge, as they are typically used to describe systems architecture and dynamic behaviors. System knowledge is here intended as the blending of collected data and system architecture which takes the form of a “knowledge graph”. A knowledge graph is a database which consists of a large set of nodes (in our case an entity can be either a data or an MBSE element) which are linked to each other. The types of nodes and links follow a pre-defined topology, sometimes also refers as an ontology, that is designed to fit the actual decisions that needs to be performed. We show here how a knowledge graph can be defined to support system engineer maintenance decisions and how the same graph can be built based on system MBSE models and pre-processed data from numeric (through anomaly detections and diagnostic methods) and textual elements (through technical language processing TLP).

97 - MATHEMATICS AND COMPUTING↗
NASA NTRS1986

Impulsive phase explosive dynamics

Observational evidence and theoretical models for explosive mass motion in the impulsive phase of solar flares are reviewed. Data showing X-ray blueshifts and H-alpha redshifts are presented in graphs and diagrams and interpreted in terms of upward-moving material at 10 million K and downward-moving material at 10,000 K. This motion is found to be most simply explained in terms of explosive chromospheric evaporation.

Canfield, Richard C.↗
NASA NTRS1988

A postencounter view of comets

Ground-based and space observations of Comet Halley during its 1986 perihelion passage are reviewed, with an emphasis on their implications for theoretical models. Consideration is given to the shape, surface morphology, and composition of the comet nucleus; the shape, dynamics, and composition of the dust tail; neutral and ionic gas species in the head and plasma tail; and the comet/solar-wind interaction. Extensive diagrams, graphs, and sample images are provided, and the potential value of the new kinds of data to be obtained with the NASA Comet-Rendezvous/Asteroid-Flyby spacecraft is discussed.

Mendis, D. A.↗
NASA NTRS1993

A comparison of multiprocessor scheduling methods for iterative data flow architectures

A comparative study is made between the Algorithm to Architecture Mapping Model (ATAMM) and three other related multiprocessing models from the published literature. The primary focus of all four models is the non-preemptive scheduling of large-grain iterative data flow graphs as required in real-time systems, control applications, signal processing, and pipelined computations. Important characteristics of the models such as injection control, dynamic assignment, multiple node instantiations, static optimum unfolding, range-chart guided scheduling, and mathematical optimization are identified. The models from the literature are compared with the ATAMM for performance, scheduling methods, memory requirements, and complexity of scheduling and design procedures.

Storch, Matthew↗
NASA NTRS2019

Rising Above the Cloud - Toward High-Rate Delay-Tolerant Networking in Low-Earth Orbit

The High Data Rate Architecture (HiDRA) project is implementing a High-rate Delay Tolerant Networking (HDTN) capability that can support Low Earth Orbit (LEO) applications and environments. The present state of the effort, future work, and other elements of the work to date are described in this paper. This implementation is intended to support applications that run at 1+ Gbps, per the requirements of modern optical and high-frequency RF links. Uniquely, this implementation is also tuned to support relay and data trunking applications, which might require support for large numbers of small bundles per second. The design for this platform is based entirely on commercial-off-the-shelf (COTS) components, and possesses buffering capabilities in the 5 TB range. This document takes results from previous individual tests and integrates them to demonstrate results in the presence of a coherent use-case: consider a network aboard the ISS which intends to utilize an upcoming optical communications capability. For this use-case, orbital analysis software is used to analyze orbital dynamics, from which a list of access times are generated that might take in to account weather, schedule competition, etc. A variant of Contact Graph Routing (CGR) is applied to these windows to determine an optimal schedule. This schedule is then loaded into the HDTN prototype and, in conjunction with various measurement tools, a complete end-to-end analysis of HDTN's performance is conducted. Various bottlenecks (including storage) are identified: these bottlenecks are expected to help us focus our future work on the elements of the system that are most likely to present issues moving forward. Finally, we discuss possible paths for evolution beyond the present rates supported by the system, including (but not limited to) hardware acceleration.

Hylton, Alan↗
DOE OSTI2024

Stochastic finite volume method for uncertainty quantification of transient flow in gas pipeline networks

We develop a weakly intrusive framework to simulate the propagation of uncertainty in solutions of generic hyperbolic partial differential equation systems on graph-connected domains with nodal coupling and boundary conditions. The method is based on the Stochastic Finite Volume (SFV) approach and can be applied for uncertainty quantification (UQ) of the dynamical state of fluid flow over actuated transport networks. The numerical scheme has specific advantages for modeling intertemporal uncertainty in time-varying boundary parameters, which cannot be characterized by strict upper and lower (interval) bounds. We describe the scheme for a single pipe, and then formulate the controlled junction Riemann problem (JRP) that enables the extension to general network structures. In conclusion, we demonstrate the method's capabilities and performance characteristics using a standard benchmark test network.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Studying CPU and memory utilization of applications on Fujitsu A64FX and Nvidia Grace Superchip

ARM-based manycore CPU architectures are well-positioned to provide the rising memory throughput requirements of modern data intensive scientific applications in High Performance Computing (HPC). The Fujitsu A64FX CPU platform is based on the ARM v8.2A architecture, and is the processor of the flagship Japanese supercomputer - "Fugaku", which was previously ranked as the #1 supercomputer in the world according to the Top500 list. The Nvidia Grace superchip features 144 Neoverse V2 cores based on the ARMv9 architecture with 4x128b SVE2, providing exceptional computational power. The chip supports up to 480GB of memory, making it ideal for AI, machine learning, and scientific computing workloads. In this paper, we conduct a thorough performance exploration of a variety of parallel bandwidth-sensitive benchmarks and applications compiled with the native Fujitsu compiler on a Fugaku A64FX compute node and ARM (LLVM) Compiler on an NVIDIA Grace superchip compute node, engaging all the computational cores per cluster using OpenMP multithreading (assuming the cores can drive the available bandwidth). Our ultimate goals are to study the resource utilization of scientific applications and benchmarks on A64FX and Grace superchip, considering graph application scenarios ( GAP Benchmark suite) and eleven appli- cation proxies from the Rodinia heterogeneous benchmark suite (considering domains such as Data Mining, Bioinformatics, Fluid Dynamics, Pattern Recognition, etc.). Through exhaustive performance monitoring, we quantify the resource utilization of diverse OpenMP-based HPC applications on both the Fujitsu A64FX and the Nvidia Grace Superchip platforms.

benchmarking, Performance Analysis, High performan↗
NASA NTRS1990

Prototyping user displays using CLIPS

CLIPS is being used as an integral module of a rapid prototyping system. The prototyping system consists of a display manager for object browsing, a graph program for displaying line and bar charts, and a communications server for routing messages between modules. A CLIPS simulation of a physical model provides dynamic control of the user's display. Currently, a project is well underway to prototype the Advanced Automation System (AAS) for the Federal Aviation Administration.

Kosta, Charles P.↗
NASA NTRS1987

Voyager infrared observations of Uranus' atmosphere - Thermal structure and dynamics

The temperature structure of the Uranus atmosphere is investigated on the basis of 325/cm and 225/cm Voyager 2 IRIS observations of a layer between 60 and 200 mbar (including the tropopause). The data are presented in graphs and analyzed in detail. The latitudinal variations of the temperature near the tropopause and the inferred thermal winds are shown to be in good agreement with the findings reported for lower altitudes by Hanel et al. (1986), although greater in amplitude. A linear zonally symmetric circulation model with no solar and condensation heating, a frictional damping time 1-2 times the radiative damping time, a subrotating atmosphere at low latitudes, and zonal winds decaying with altitude is proposed to account for the observed structures.

Flasar, F. M.↗
NASA NTRS1990

A nonrecursive order N preconditioned conjugate gradient: Range space formulation of MDOF dynamics

While excellent progress has been made in deriving algorithms that are efficient for certain combinations of system topologies and concurrent multiprocessing hardware, several issues must be resolved to incorporate transient simulation in the control design process for large space structures. Specifically, strategies must be developed that are applicable to systems with numerous degrees of freedom. In addition, the algorithms must have a growth potential in that they must also be amenable to implementation on forthcoming parallel system architectures. For mechanical system simulation, this fact implies that algorithms are required that induce parallelism on a fine scale, suitable for the emerging class of highly parallel processors; and transient simulation methods must be automatically load balancing for a wider collection of system topologies and hardware configurations. These problems are addressed by employing a combination range space/preconditioned conjugate gradient formulation of multi-degree-of-freedom dynamics. The method described has several advantages. In a sequential computing environment, the method has the features that: by employing regular ordering of the system connectivity graph, an extremely efficient preconditioner can be derived from the 'range space metric', as opposed to the system coefficient matrix; because of the effectiveness of the preconditioner, preliminary studies indicate that the method can achieve performance rates that depend linearly upon the number of substructures, hence the title 'Order N'; and the method is non-assembling. Furthermore, the approach is promising as a potential parallel processing algorithm in that the method exhibits a fine parallel granularity suitable for a wide collection of combinations of physical system topologies/computer architectures; and the method is easily load balanced among processors, and does not rely upon system topology to induce parallelism.

Kurdila, Andrew J.↗
NASA NTRS1981

A measurement of the hyperfine structure of CO-17

It is pointed out that the isotope of carbon monoxide, CO-17, has appreciable hyperfine structure caused by the electric quadrupole and the magnetic dipole interactions of the O-17 nucleus which has a spin of 5/3. During a radioastronomical study of the structure and dynamics of cold interstellar clouds, it was found that the Bok globule B335 had an extremely small velocity dispersion such that the hyperfine components are clearly resolved. A graph is provided which shows the antenna temperature (a measure of intensity) of the CO-17 emission as a function of frequency. The hyperfine constants and line frequencies were redetermined for the CO-17 J=1 yields 0 rational transition. The observation of CO-17 was carried out with a 7 meter Cassegrain antenna during 1979 and 1980. The CO-17 molecular line parameters are listed in a table.

Frerking, M. A.↗
NASA NTRS1983

The dynamics and control of large flexible space structures, 6

The controls analysis based on a truncated finite element model of the 122m. Hoop/Column Antenna System focuses on an analysis of the controllability as well as the synthesis of control laws. Graph theoretic techniques are employed to consider controllability for different combinations of number and locations of actuators. Control law synthesis is based on an application of the linear regulator theory as well as pole placement techniques. Placement of an actuator on the hoop can result in a noticeable improvement in the transient characteristics. The problem of orientation and shape control of an orbiting flexible beam, previously examined, is now extended to include the influence of solar radiation environmental forces. For extremely flexible thin structures modification of control laws may be required and techniques for accomplishing this are explained. Effects of environmental torques are also included in previously developed models of orbiting flexible thin platforms.

Bainum, P. M.↗
NASA NTRS1987

The nature of comets

The large-scale structure, dynamics, and chemical composition of comets are examined on the basis of preliminary ground-based and space-probe data from the Halley return of 1986. Diagrams, graphs, photographs, and false-color images are provided, and data on Comet Giacobini-Zinner are included for comparison. Features noted include solar-wind interaction with magnetic-field draping around the head region, dramatic disconnection events, an irregularly shaped monolithic primarily water-ice nucleus and a dark surface, and dust with chemical composition like that of (H, C, N, O)-enriched carbonaceous chondrites.

Brandt, J. C.↗
NASA NTRS1990

Flight investigation of variations in rotorcraft control and display dynamics for hover

Results are presented from a flight test of experimental control/display systems for the U.S. Army/NASA CH-47B variable-stability research helicopter in hovering maneuvers, supplementing the preliminary report of Eshow et al. (1987). The display format was a simplified version of the pilot night-vision system for the Apache AH-64, and the tests measured pilot performance in hover-pad capture and hover-pad tracking tasks (under simulated zero visibility) using displays based on (1) gainlike and (2) integratorlike controlled-element responses to control inputs. The implementation of the vehicle-response dynamics through an explicit model-following control system and the derivation of the display laws are described, and the test results are presented in extensive tables and graphs. Display type (1) was found to be preferred by the pilots and to give generally better performance than type (2).

Eshow, Michelle M.↗