Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Wieserman, W. R.↗

Comparison of high temperature, high frequency core loss and dynamic B-H loops of two 50 Ni-Fe crystalline alloys and an iron-based amorphous alloy

The availability of experimental data that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency is almost nonexistent. An experimental investigation was conducted over the temperature range of 23 to 300 C and frequency range of 1 to 50 kHz to determine the effects of temperature and frequency on the core loss and dynamic B-H loops of three different soft magnetic materials; and oriented grain 50Ni-50Fe alloy, a nonoriented grain 50Ni-Fe alloy, and an iron based amorphous material (Metglas 2605SC). A comparison of these materials shows that the nonoriented grain 50Ni-50Fe alloy tends to have either the lowest or next lowest core loss for all temperatures and frequencies investigated.

Wieserman, W. R.↗

Comparison of high temperature, high frequency core loss and dynamic B-H loops of two 50 Ni-Fe crystalline alloys and an iron-based amorphous alloy

The availability of experimental data that characterize the performance of soft magnetic materials for the combined conditions of high temperature and high frequency is almost nonexistent. An experimental investigation was conducted over the temperature range of 23 to 300 C and frequency range of 1 to 50 kHz to determine the effects of temperature and frequency on the core loss and dynamic B-H loops of three different soft magnetic materials: an oriented-grain 50Ni-50Fe alloy, a nonoriented-grain 50Ni-50Fe alloy, and an iron-based amorphous material (Metglas 2605SC). A comparison of these materials shows that the nonoriented-grain 50Ni-50Fe alloy tends to have either the lowest or the next lowest core loss for all temperatures and frequencies investigated.

Wieserman, W. R.↗

Effects of temperature, frequency, flux density, and excitation waveform on the core loss and dynamic B-H loops of supermalloy

The availability of experimental data which characterize the performance of soft magnetic materials for the combined conditions of temperature and frequency over a wide flux density range for different types of excitation is almost nonexistent. An experimental investigation of an 80-20 Ni-Fe alloy (Supermalloy) was conducted over the temperature (T) range of 23 to 300 C, frequency (f) range of 1 to 50 kHz, and maximum flux densities (B(sub M)) from 0.1 T up to 0.7 T for both sine and square wave voltage excitation. The investigation focused on the effects of (B(sub M)), f, T, and excitation waveform on the specific core loss (SCL) and dynamic B-H loops. The results show that the ratio (R) of sine to square wave excitation specific core loss was always greater than unity for a given f and T and identical values of B(sub M). The values of R ranged from 1.07 to 1.34. The classical theory of core loss separation into a hysteresis and eddy current loss component was used to theoretically determine the lower and upper bounds on R, against which the experimental R-values were compared. The experimental R-values were also used to make a comparison of the core loss of a sine and square wave voltage driven transformer.

Schwarze, Gene E.↗

Time-series RNA metabarcoding of the active Populus tremuloides root microbiome reveals hidden temporal dynamics and dormant core members

The rhizosphere is a critical interface between plant roots and soil, harboring diverse microbial communities that are essential to plant and ecosystem health. Although these communities exhibit stark temporal dynamics, their dormancy/activity transitions remain poorly understood. Such transitions may enable microbes to rapidly adjust functional contributions faster than community turnover alone would allow. Here, we used RNA metabarcoding to characterize the active fraction of microbial communities on the roots of quaking aspen (Populus tremuloides) in a time-series study across a natural environmental gradient. We explore cryptic temporal microbial community dynamics of rhizosphere communities at the ecosystem scale. The active rhizosphere bacterial and fungal communities were more temporally dynamic than total communities, while total communities exhibited a stronger response to site-specific conditions. Notably, some core microbiome members were often inactive, yielding a smaller “active core” subset. The fungal endophyte Hyaloscypha finlandica was the only microbe that was both present and active in all plots across all timepoints. Soil temperature strongly influenced both total and active community composition, with the fungal class Eurotiomycetes showing a temperature-dependent seasonal decline in abundance. Together, these results reveal that modulation of microbial activity levels is a key mechanism by which the plant root holobiont responds to environmental variation, and that even dominant symbionts may frequently persist in dormancy within the rhizosphere.

Community Structure and Diversity↗

Comparison of continuum and cross-core theories of dynamic strain aging

Dynamic strain aging (DSA) is the process of solute atoms segregating around dislocations on the timescale of loading. Continuum theories of DSA derived from elasticity theory have been shown to severely overpredict both the timescale and strengthening of DSA. Recently, cross-core theory was developed to reconcile this gap, invoking a special single-atomic-hop diffusion mechanism across the core of an extended dislocation. In this work, we show that the classical continuum theory expression for the rate of solute segregation is in error. After correcting this error, we show that continuum theory predictions match cross-core theory when the elevated diffusivity near the dislocation core is accounted for. Finally, our findings indicate that continuum theory is still a useful tool for studying dislocation-solute interactions.

36 MATERIALS SCIENCE↗

ECAR-6330 Rev 0 Computational Fluid Dynamics Evaluation of Core Pressure Drop for the Primary Coolant Apparatus Test

PCAT is a thermal-hydraulic test loop for MARVEL reactor. The design gap thickness between the heater rods of PCAT core is 1.0 mm. The heater elements were manufactured within a straightness tolerance for the designed gap thickness, but several elements have been distorted out of tolerance during the welding process. The distortion of heater rods could lead to flow maldistribution and excessive hotspot temperature when the gap between two heater rods is too narrow. Wire-wraps are the spacer devices widely used in the sodium cooled fast reactor system to maintain the design fuel pitch. Generally, a wire spacer can enhance the turbulent heat transfer, but it increases the pressure drop, which is not desirable for a natural-circulation system like PCAT. Therefore, three short wire-wrap spacers per heater have been proposed to contain the core pressure drops and keep the heater-to-heater gap in an acceptable range. The objectives of this ECAR is to evaluate the PCAR core pressure drop with short wire spacers to confirm that the additional pressure drop due to the wire spacer will not disturb the natural circulation of the PCAT.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

The discovery of simple, theoretically sound upper limits for geomagnetic moments (dipole, quadrupole, etc.) provides a significant use of MAGSAT data, establishes useful constraints for future magnetic models, and bears strongly on the probable time required before the next polarity reversal can occur. The field models of MAGSAT data are of prime use and are highly suitable as supplied to date.

Benton, E. R.↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

An additional approach is being taken to address the problem of how to decide where to truncate spherical harmonic representations of geomagnetic data. The idea is to simply evaluate some aspect of interest at successively higher levels of truncation and then to chose that value of truncation level (N) which gives the most reasonable appearance of convergence. The preliminary determination of the onset of relative numerical stability at a truncation level of N=7 in two independent studies is thought to be a potentially significant result of practical value for field modeling. It requires further substantiation and explanation before dissemination.

Benton, E. R.↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

The magnetic determination of the depth of the core-mantle boundary using MAGSAT data is discussed. Refinements to the approach of using the pole-strength of Earth to evaluate the radius of the Earth's core-mantle boundary are reported. The downward extrapolation through the electrically conducting mantle was reviewed. Estimates of an upper bound for the time required for Earth's liquid core to overturn completely are presented. High order analytic approximations to the unsigned magnetic flux crossing the Earth's surface are also presented.

Benton, E. R.↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

Progress in the use of MAGSAT data to confirm that the radius of the Earth's core-mantle boundary can be accurately determined magnetically is reported. The MAGSAT data was used in conjunction with a high quality manfield model for epoch 1965. The unsigned flux linking the core and mantle of the Earth is considered to be a legitimate invariant for a span of time. The value from MAGSAT of this constant is 16.056 GWb (gigawebers).

Benton, E. R.↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

It was established that the total absolute magnetic flux crossing the core- mantle boundary has been a constant of the core motion for the last 50 years. This provides a scalar constraint that could be added to the geometric modelling procedure. The GSFC 8 8/80 model is being evaluated. The absolute magnetic flux linking the CMB to that model was plotted as a function of time during the span covered by the data, and increasing truncation level. The inclusion of the standard error of each Gauss coefficient derived from the statistics of fit in the GSFC 9/80 model is useful. The magnitude and sense (upwelling or downe welling) of vertical fluid motion adjacent to the core-mantle boundary was calculated using the model. Standard errors were found to be sufficiently small at all but one or two of the 40 or more critical points of B sub r. They do not nearly overlap the value gamma u/gamma r = 0. It is concluded that the core is upwelling and downwelling at an observationally detectable level.

Benton, E. R.↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

Accomplishments to date were summarized in three parts submitted for publication. Goddard models and MAGSAT data were used heavily in the investigation which address: (1) the sensitivity of selected geomagnetic properties to truncation level of spherical harmonic expansions; (2) the pole strength of the Earth from MAGSAT, and magnetic determination of the core radius; and (3) frozen flux upper limits to the MAGSAT geomagnetic coefficients and relative multipole indices for Earth.

Benton, E. R.↗

Investigation of geomagnetic field forecasting and fluid dynamics of the core

Progress in the development, testing, and evaluation of kinematic geomagnetic forecast models and their utility in magnetic prediction of the core-mantle boundary of the Earth and in determination of the core radius is reported. The GFSC 9/80 model, which uses MAGSAT data, was determined to be of high quality.

Benton, E. R.↗