Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Time dependent quantum dynamics study of the Ne+H{sub 2}{sup +}(v=0-4){yields}NeH{sup +}+H proton transfer reaction

The Ne+H{sub 2}{sup +}{yields}NeH{sup +}+H proton transfer reaction was studied using the time dependent real wave packet quantum dynamics method at the helicity decoupling level, considering the H{sub 2}{sup +} molecular ion in the (v=0-4, j=0) vibrorotational states and a wide collision energy interval. The calculated reaction probabilities and reaction cross sections were in a rather good agreement with reanalyzed previous exact quantum dynamics results, where a much smaller collision energy interval was considered. Also, a quite good agreement with experimental data was found. These results suggested the adequacy of the approach used here to describe this and related systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Surface Features on the Initial Dissolution of CH 3 NH 3 PbI 3 Perovskite in Liquid Water: An Ab Initio Molecular Dynamics Study

In this study, the degradation of CH 3 NH 3 PbI 3 (MAPbI 3 ) hybrid organic inorganic perovskite (HOIP) by water has been the major issue hampering its use in commercial perovskites solar cells (PSCs) as MAPbI 3 HOIP have been known to easily degrade in the presence of water molecules. However, even though there have been numerous studies investigating this phenomenon, there is still no consensus on the mechanisms of initial stages of dissolution. Here, we attempt to consolidate differing mechanistic interpretations previously reported in the literature through the use of the first-principles constrained ab-initio molecular dynamics (AIMD) to study the mechanisms, kinetics, and thermodynamics that accompany the degradation of MAPbI 3 HOIP in liquid water. We consider not only the dissolution of the species found on the pristine MAPbI 3 HOIP surfaces, but also the dissolution from defect sites to imitate the successive degradation steps, and propose a sequence of events in the initial phase of MAPbI 3 HOIP dissolution. By comparing the dissolution free energy barrier between surface species of different surficial types, we find that the dominant dissolution mechanisms of surface species varies widely based on the specific surface features adjacent to the dissolving ion. The high sensitivity of dissolution mechanism to surface features has contributed to the many dissolution mechanisms proposed in the literature. In contrast, the dissolution free energy barriers are mainly determined by the dissolving species rather than the type of surfaces, and the type of surfaces the ions are dissolving from are inconsequential toward the dissolution free energy barrier. However, the presence of surface defects such as vacancy sites are found to significantly lower the dissolution free energy barriers. Based on the estimated dissolution free energy barriers from different types of surfaces that we investigated in this study, we proposed that the dissolution of MAPbI 3 HOIP in liquid water originates from surface defect sites that propagate laterally along the surface layer of the MAPbI 3 HOIP crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamic studies on anisotropic explosion of laser irradiated Xe cluster

A three dimensional molecular dynamic model is used to investigate the dynamics of Xe clusters of various radii irradiated by laser of moderate intensities ({approx}10{sup 14}-10{sup 16}W/cm{sup 2}). The FWHM pulse duration of the laser is varied from few laser cycles to hundreds of femtosecond. For cluster of radius 50 A irradiated by a laser of 170 fs pulse duration, it is observed that ion yield is more along the direction of laser polarization than perpendicular to it. This trend reverses (more ions are emitted along the direction perpendicular to laser polarization than parallel to it) when laser pulses of few cycles are used. This reversal of anisotropy is explained on the basis of spatial shielding of ions due to the oscillating inner electron cloud along direction of laser electric field. The nature of anisotropy remains same with variations in laser intensity and cluster size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotope effect on hydrated electron relaxation dynamics studied with time-resolved liquid jet photoelectron spectroscopy

The excited state relaxation dynamics of the solvated electron in H{sub 2}O and D{sub 2}O are investigated using time-resolved photoelectron spectroscopy in a liquid microjet. The data show that the initial excited state decays on a time scale of 75 ± 12 fs in H{sub 2}O and 102 ± 8 fs in D{sub 2}O, followed by slower relaxation on time scales of 400 ± 70 fs and 390 ± 70 fs that are isotopically invariant within the precision of our measurements. Based on the time evolution of the transient signals, the faster and slower time constants are assigned to p → s internal conversion (IC) of the hydrated electron and relaxation on the ground electronic state, respectively. This assignment is consistent with the non-adiabatic mechanism for relaxation of the hydrated electron and yields an isotope effect of 1.4 ± 0.2 for IC of the hydrated electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-equilibrium molecular dynamics studies of thermal diffusion of hydrogen isotopes in low concentration zirconium hydrides

Tritium permeability in zirconium-based tritium getter critically impacts tritium storage and environmental safety during operation of tritium-producing burnable absorber rods (TPBARs). Previous experiments indicated that during irradiation operation, the hydrogen equilibrium pressured is increased. Further experimental and modeling studies suggested that the enhanced tritium release observed for reactor scale assemblies might be related to a thermal diffusion known as the Soret effect. A direct measurement of the Soret factor, however, has not been performed. To improve TPBAR and other nuclear applications, here we have applied two non-equilibrium molecular dynamics methods to study thermal diffusion of hydrogen isotopes in low-concentration zirconium hydrides. One of the methods produces sufficiently converged results to distinguish crystal orientation, isotope type, and concentration effects. In conclusion, with this method, crystal orientation, isotope type, and concentration effects are discussed.

36 MATERIALS SCIENCE↗

Role of dislocations on martensitic transformation temperatures and microstructure: A molecular dynamics study

Microstructure and defects strongly affect martensitic transformations in metallic alloys. Significant progress has been made in understanding the atomic-level processes that control the role of grain boundaries and precipitates in these solid-to-solid phase transformations. Yet, the role of dislocations and their structures on martensitic transformation temperature and the resulting microstructure remains unclear. Therefore, we used large-scale molecular dynamics simulations to study the forward and reverse transformation of a martensitic material modeled after Ni63Al37 under cyclic thermal loading. The simulations reveal that dislocations in the austenite phase act as one-dimensional seeds for the martensite phase, which is present at temperatures significantly above the martensite start value. We find a reduction in the dislocation density during cyclic thermal loading, which results in the increase in martensite and austenite transition temperatures, in agreement with experiments. Importantly, we extracted a critical martensitic nuclei size for developing stable domains and found that relatively low dislocation densities are needed to grow independent martensitic variants resulting in a multi-domain structure.

Physics↗

Ab initio and force field molecular dynamics study of bulk organophosphorus and organochlorine liquid structures

Here, we performed ab initio molecular dynamics (AIMD) simulations to benchmark bulk liquid structures and to evaluate results from all-atom force field molecular dynamics (FFMD) simulations with the generalized Amber force field (GAFF) for organophosphorus (OP) and organochlorine (OC) compounds. Our work also addresses the current and important topic of force field validation, applied here to a set of nonaqueous organic liquids. Our approach differs from standard treatments, which validate force fields based on thermodynamic data. Utilizing radial distribution functions (RDFs), our results show that GAFF reproduces the AIMD-predicted asymmetric liquid structures moderately well for OP compounds that contain bulky alkyl groups. Among the OCs, RDFs obtained from FFMD overlap well with AIMD results, with some offsets in position and peak structuring. However, re-parameterization of GAFF for some OCs is needed to reproduce fully the liquid structures predicted by AIMD. The offsets between AIMD and FFMD peak positions suggest inconsistencies in the developed force fields, but, in general, GAFF is able to capture short-ranged and long-ranged interactions of OPs and OCs observed in AIMD. Along with the local coordination structure, we also compared enthalpies of vaporization. Overall, calculated bulk properties from FFMD compared reasonably well with experimental values, suggesting that small improvements within the FF should focus on parameters that adjust the bulk liquid structures of these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics study of silicon atomic layer etching by chlorine gas and argon ions

Classical molecular dynamics (MD) is used to simulate atomic layer etching processes of silicon by alternating exposure to chlorine gas and argon ions. In order to validate our model, a rigorous comparison is done with ion beam experiments found in the literature [Park et al., Jpn. J. Appl. Phys. 44, 389 (2005)]. Here it is shown that the etch per cycle (EPC) as a function of argon ion energy from simulations is in quantitative agreement with experimental results if the correct argon ion fluence is used in the simulations. The EPC as a function of ion irradiation time and amount of chlorine exposure also show good agreement with the experiment. The MD simulations also show the formation of an amorphous silicon region with chlorine atoms mixed uniformly throughout following ion bombardment. Finally, the etch products during the ion irradiation step are analyzed and discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design and Beam Dynamics Studies of a Multi-Ion Linac Injector for the JLEIC Ion Complex

The electron-ion collider (JLEIC) being proposed at JLab requires a new ion accelerator complex which includes a linac capable of delivering any ion beam from hydrogen to lead to the booster. We are currently developing a linac which consists of several ion sources, a normal conducting (NC) front end, up to 5 MeV/u, and a SC section for energies > 5 MeV/u. This design work is focused on the beam dynamics and electrodynamics studies performed to design efficient and cost-effective accelerating structures for both the NC and SC sections of the linac. Currently, we are considering two separate RFQs for the heavy-ion and light-ion beams including polarized beams, and different types of NC accelerating structures downstream of the RFQ. Quarter-wave and half-wave resonators can be effectively used in the SC section.

Ostroumov, P. N.↗

A molecular dynamics study of anisotropy and the effect of Xe on UO 2 thermal conductivity

In this report we first investigate the effect of Xe on UO 2 thermal conductivity via molecular dynamics simulations. This property is studied both as function of temperature and for different concentrations and configurations of Xe atoms (randomly dispersed and in gas bubbles). The largest decrease of the thermal conductivity is obtained for randomly distributed Xe atoms, which is due to high defect scattering and thus decreasing phonon mean free path. Second we demonstrate several different manifestations of anisotropic UO 2 thermal conductivity, including discontinuities between the conductivity of bulk UO 2 separated by asymmetric grain boundaries and variations of the conductivity along different crystallographic directions in single crystals of UO 2 . These results are validated against recent experiments on UO 2 single crystals.

36 MATERIALS SCIENCE↗

Ab Initio Molecular Dynamics Study of the Reduction of Acetone by the Hydrated Electron

We have investigated the reaction dynamics of the reduction of acetone by the solvated electron in water using ab initio molecular dynamics simulations at 298 and 373 K. The rate constants derived from the simulations are consistent with experimental observations that the reaction has a low activation energy. Detailed analyses carried out to shed light on the mechanism of the reaction show that solvent reorganization plays a key role as a reaction coordinate, as expected from the Marcus electron transfer theory. Furthermore, constrained density functional theory calculations indicate that the electronic coupling is large, placing the reaction in the adiabatic limit. Indeed, the activation energies and rate constants of the simulations are in accordance with the predictions of adiabatic Marcus theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics studies of the size and temperature dependence of the kinetics of freezing of Fe nanoparticles

Molecular dynamics (MD) computer simulations have been carried out and a novel modified technique of Voronoi polyhedra has been performed to identify solid-like particles in a molten nanoparticle. This technique works quite well in analyzing the effects of particle size on nucleation rates of iron nanoparticles in the temperature range of 750–1160 K. Nanoparticles with 1436 and 2133 Fe atoms have been examined and the results are compared with those obtained earlier with Fe{sub 331} nanoparticles. Nucleation rates for freezing obtained from MD simulations for Fe{sub 2133} vary from 8.8×10{sup 34} m{sup 3}/s to 4.1×10{sup 35} m{sup 3}/s at over a temperature range from 1160 K to 900 K, Rates for. Fe{sub 1436} and Fe{sub 331} are somewhat higher. Nucleation rates increase as supercooling deepens until the viscosity of the liquid increases sharply enough to slow down the rate. Bt applying classical nucleation theory, the interfacial free energy between solid and liquid cab be estimated From this and other thermodynamic information can be derived a theoretical expression for the size-dependence of the heat of fusion of nanoparticles. Results agreed quite well with those observed in our MD observations. An earlier expression in the literature for this size-dependence was shown to be incorrect. The size dependence of melting point is discussed. - Graphical abstract: Critical nuclei of crystallization. Display Omitted - Highlights: • Solid state material synthesis. • Material structure. • Experimental study of nucleation in condensed materials. • Computation study of nucleation in condensed materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

All-Atom Molecular Dynamics Study of Water–Dodecane Interface in the Presence of Octanol

In this work, classical atomistic molecular dynamics (MD) simulations were performed to investigate the structural properties of octanol at water/dodecane interface. Multiple combinations of simulation conditions and force fields were employed in order to :obtain high fidelity interfacial structure. The analysis of noncovalent interactions shows that the convergence of interfacial octanol distribution requires a simulation time scale larger than 100 ns. Finite size effect diminishes with increasing dimension of simulation box both laterally and vertically. In the largest simulated systems with vanishing finite size effect, the additive CHARMM force field shows similar interfacial aggregation behavior with the DRUDE polarizable model. Self-assembly of octanol molecules at water/oil interface is observed, expected to reduce;the free energy barrier between water phase and oil phase. This work provides an MD simulation benchmark for structural study of complex liquid/liquid interface with cosurfactant reducing interfacial tension between two immiscible phases.

Qiao, Baofu↗

Ligand-Dependent Sodium Ion Dynamics within the A 2A Adenosine Receptor: A Molecular Dynamics Study

Sodium ions have long been known to reduce the binding of agonists in many class-A GPCRs while having little effect on antagonist binding. In this study, using long-time scale classical all-atom molecular dynamics simulations, we explore, in atomic detail, the motion of sodium ions within the ligand-binding pocket of the A 2A adenosine receptor (A2A-AR) both in the presence and absence of ligands and in the active and inactive state. We identify novel secondary ion binding sites within the pocket and find that the types of ion motions within the pocket are highly dependent on the presence and type of ligand within the pocket. Finally, our results provide a first step toward developing a molecular understanding of the impact of sodium ions on class-A GPCRs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics studies of helium bubble effects on grain boundary fracture vulnerabilities in an Fe 70 Ni 11 Cr 19 –1%H austenitic stainless steel

Comprehensive molecular dynamics tensile test simulations have been performed to study the delamination processes of seven different grain boundaries / cleavage planes (Σ1{111}, Σ3{111}, Σ5{100}, Σ7{111}, Σ9{411}, Σ11{311}, and R{100}/{411}) containing a helium bubble. Combinations of a variety of conditions are explored including different strain rates, system dimensions, bubble density, bubble radius, bubble pressure, and temperature. We found that in general, grain boundaries absorb less energies with decreasing strain rate but increasing bubble areal density, bubble pressure, bubble radius, and temperature. The propensity of grain boundary delamination is sensitive to grain boundary type: The random grain boundary R{100}/{411} is one of the most brittle boundaries whereas the Σ1{111} cleavage plane and the Σ3{111} twin boundary are two of the toughest boundaries. The sorted list of grain boundary fracture vulnerability obtained from our dynamic tensile test simulations differs from the one obtained from our decohesion energy calculations, confirming the important role of plastic deformation during fracture. Finally, detailed mechanistic analyses are performed to interpret the simulated results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined 3D-QSAR, molecular docking and molecular dynamics study on thyroid hormone activity of hydroxylated polybrominated diphenyl ethers to thyroid receptors β

Several recent reports suggested that hydroxylated polybrominated diphenyl ethers (HO-PBDEs) may disturb thyroid hormone homeostasis. To illuminate the structural features for thyroid hormone activity of HO-PBDEs and the binding mode between HO-PBDEs and thyroid hormone receptor (TR), the hormone activity of a series of HO-PBDEs to thyroid receptors β was studied based on the combination of 3D-QSAR, molecular docking, and molecular dynamics (MD) methods. The ligand- and receptor-based 3D-QSAR models were obtained using Comparative Molecular Similarity Index Analysis (CoMSIA) method. The optimum CoMSIA model with region focusing yielded satisfactory statistical results: leave-one-out cross-validation correlation coefficient (q{sup 2}) was 0.571 and non-cross-validation correlation coefficient (r{sup 2}) was 0.951. Furthermore, the results of internal validation such as bootstrapping, leave-many-out cross-validation, and progressive scrambling as well as external validation indicated the rationality and good predictive ability of the best model. In addition, molecular docking elucidated the conformations of compounds and key amino acid residues at the docking pocket, MD simulation further determined the binding process and validated the rationality of docking results. -- Highlights: ► The thyroid hormone activities of HO-PBDEs were studied by 3D-QSAR. ► The binding modes between HO-PBDEs and TRβ were explored. ► 3D-QSAR, molecular docking, and molecular dynamics (MD) methods were performed.

60 APPLIED LIFE SCIENCES↗

Six-dimensional quantum dynamics study for the dissociative adsorption of HCl on Au(111) surface

The six-dimensional quantum dynamics calculations for the dissociative chemisorption of HCl on Au(111) are carried out using the time-dependent wave-packet approach, based on an accurate PES which was recently developed by neural network fitting to density functional theory energy points. The influence of vibrational excitation and rotational orientation of HCl on the reactivity is investigated by calculating the exact six-dimensional dissociation probabilities, as well as the four-dimensional fixed-site dissociation probabilities. The vibrational excitation of HCl enhances the reactivity and the helicopter orientation yields higher dissociation probability than the cartwheel orientation. A new interesting site-averaged effect is found for the title molecule-surface system that one can essentially reproduce the six-dimensional dissociation probability by averaging the four-dimensional dissociation probabilities over 25 fixed sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗