SEARCH · Search NASA

Results for “economic viability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Design and full core fuel performance assessment of high burnup cores for 4-loop PWRs

Increasing the fuel discharge burnup of current light water reactors (LWRs) promises reductions in fuel cycle and/or operations costs. By assuming a constant core power density, the economic gain is enabled by better fuel utilization and/or an increased capacity factor. In this effort to investigate greater than 62 MWd/kgU maximum rod average burnup for 110+ kW/l core power density, two core designs have been developed for a standard 17x17, 193 fuel assemblies pressurized water reactor (PWR). The levelized unit cost methodology is employed to evaluate fuel cycle, operation and maintenance, and capital cost impacts and to examine the economic viability of both core design pathways. Core design and optimization are performed using the commercial STUDSVIK code package. Fuel performance analysis is realized in full core configuration via auditing FRAPCON4.1, FAST1.2, and the high-fidelity code BISON. To provide a realistic assessment, the core design process takes into consideration best practices in current PWR core design. It features acceptable performance in terms of various core design constraints on maximum allowable peaking and boron concentration. Gadolinia (Gd2O3) is used as a burnable poison with a maximum of 9 wt% concentration while feeding 89 or 77 fuel assemblies in a 3-batch refueling scheme. Full core fuel performance simulation, which allows for characterization of relevant fuel temperatures, plenum pressures, stresses, and strains, is performed with respect to two bounding burnup levels. Such performance is potentially licensable for the 18-month high burnup core (<68 MWd/kgU peak pin), while it is more challenging for the 24-month high burnup core design pathway (<75 MWd/kgU peak pin). Maximum rod plenum pressure is identified as the most limiting fuel performance parameter. Here, while the scope of the present study focuses on the steady-state plus overpower conditions, the acceptability of the new discharge burnup has to be further assessed by considering uncertainties and impacts under accident scenarios in the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Biorefinery siting and sizing to achieve the US Billion‐Ton Bioeconomy vision: A case study using a gasification–Fischer–Tropsch process

Achieving a secure, abundant, and affordable energy future requires a robust and adaptable energy strategy, with bioenergy playing a pivotal role. Biomass-based energy presents a promising pathway to use domestic resources while fostering economic opportunities in rural areas. Despite the potential to source more than 1 billion dry short tons of biomass annually in the US, significant infrastructure and economic barriers hinder full utilization for energy production. This study used the Biofuel Infrastructure, Logistics, and Transportation (BILT) model to assess biorefinery siting and scale and determine the number and size of facilities required to maximize use of the US biomass potential. A spatially agnostic approach first assessed the effects of facility capacity and transportation constraints on biomass use. Then, a spatially explicit analysis integrated county-level biomass availability from the US Department of Energy's 2023 Billion-Ton Report and technoeconomic assessments to evaluate different biorefinery deployment scenarios. The results indicate that an optimized mix of facility sizes is essential to leverage biomass resources fully across varying regional production densities to maximize use of the US biomass potential. Larger biorefineries or co-located smaller facilities significantly enhance biomass use while reducing costs through economies of scale. These findings underscore the importance of strategically balancing facility capacity and spatial distribution to optimize the bioenergy supply chain. In conclusion, this study provides critical insights for advancing the US bioenergy economy by aligning biorefinery deployment with biomass resource availability and economic viability.

BILT Model↗

DOE OSTI2026

Simulating competition in the US bioeconomy to produce hard‐to‐electrify transportation fuels using limited biomass resources

This study presents a novel bioeconomy optimization framework, BiOpt, designed to address critical questions regarding the strategic use of limited US biomass resources for biofuel production. By integrating detailed techno-economic analyses, life cycle assessments, and resource assessment data, BiOpt optimizes resource distributions across competing technologies to maximize economic performance and/or minimize greenhouse gas emissions. Using feedstock scenarios from the 2023 Billion Ton Study, the analysis explores optimal biomass allocations across sustainable aviation fuel, diesel, and marine biofuel conversion pathways given varying production targets and policy incentives. Results demonstrate distinct feedstock preferences and pathway utilizations when prioritizing economic returns vs. emissions reductions. For instance, fats, oils, and greases were highly favored in cost-optimized scenarios, while low-carbon feedstocks such as wet waste dominated greenhouse gas-minimized strategies. The findings underscore the pivotal role of policy incentives and technological advances in shaping biofuel supply chains and provide actionable insights for scaling sustainable biofuel production to decarbonize hard-to-electrify sectors. This framework offers a robust tool for policymakers and stakeholders to evaluate biofuel strategies that balance energy output, economic viability, and environmental impact.

09 BIOMASS FUELS↗

DOE OSTI2025

Genetically engineered poplar wood effectively enhances the efficiency of deep eutectic solvent-mediated one-pot processing

Although lignocellulosic biomass is a renewable resource with the potential to replace fossil-derived fuels and chemicals, its recalcitrance, largely due to lignin, limits its utilization. Recent advancements in genetic engineering have produced transgenic trees with reduced lignin content and/or modified lignin structure without compromising growth traits. Here, three engineered poplar varieties are evaluated as feedstocks using a biocompatible one-pot deep eutectic solvent-mediated process that integrates biomass fractionation and enzymatic saccharification within a single reactor, eliminating water washing and reconditioning. All transgenic poplars exhibit higher fermentable sugar yields than wild-type (WT) trees. Notably, QsuB poplar, incorporating 3,4-dihydroxybenzoate in lignin, achieves the highest glucose conversion yield of 91.3% (vs. 73.0% from WT). AT5 and MdCHS3 poplars, incorporating ferulate esters and naringenin, also demonstrate improved glucose yields (86.7 and 84.7%, respectively), confirming reduced biomass recalcitrance. Additionally, residual lignins are valorized via hydrogenolysis into phenolic compounds, with comparable alkylphenol production across all lines. These findings demonstrate that the transgenic poplar lines not only serve as superior feedstocks for sugar conversion but also provide a rich resource for phenolic compound production, enhancing the operational and economic viability of integrated biorefinery processes.

biomasses↗

DOE OSTI2024

Review of Technical Photovoltaic Key Performance Indicators and the Importance of Data Quality Routines

Technical key performance indicators (KPIs) are important metrics used to assess and quantitatively summarize various aspects of photovoltaic (PV) systems, including long-term performance, economic viability, and carbon footprint. Herein, a group of experts of the International Energy Agency's Photovoltaic Power Systems Programme Task 13 collect and describ the most important technical KPIs used in the industry. Thereby, a set of best practices for reliably handling PV system data is presented and the impact of data quality and climatic variability on KPI calculation is investigated. Further, the effective use of technical KPIs allows triggering data-driven and informed decisions to optimize PV systems and providing a comprehensive overview of how PV systems operate across different conditions and climates. With the worldwide growth of the PV industry, more companies operate/own PV systems in different regions, where the climatic and seasonal profiles differ. This requires context-aware evaluation of KPIs, or the judicious application of multiple KPIs, to ensure that each asset is evaluated correctly. Beyond that, there is untapped potential in the utilization of KPIs through geospatial mapping and extrapolation of fleet KPIs. This study demonstrates that the uncertainty in KPI estimation is not well understood and depends on data quality, climatic variability, and system configuration.

14 SOLAR ENERGY↗

DOE OSTI2021

Chapter 3: New Developments on Ionic Liquid-Tolerant Microorganisms Leading Toward a More Sustainable Biorefinery

The growing concerns about climate change and energy security are driving the development of bio-based technologies to produce renewable liquid fuels and chemicals. Ionic liquids (ILs) have demonstrated to be promising solvents to pretreat lignocellulosic residues, promoting efficient enzymatic hydrolysis of lignocellulosic carbohydrates into sugars, which can be further used by microorganisms to produce biofuels and other value-added chemicals. Despite their unique properties to effectively deconstruct plant cell walls, ILs show strong interactions with the pretreated biomass, and their presence is often inhibitory to cellulolytic enzymes and microorganisms. The most advanced biorefinery concepts based on IL pretreatments focus on the development of more biocompatible ILs and more robust microbial strains with higher tolerance to ILs. This chapter provides an overview and a discussion over the main efforts performed on the screening and development of IL-tolerant microbial strains, as well as in more biocompatible IL pretreatment methods. These early research advancements in this field offer a baseline and a platform for future research with the goal of improving the sustainability and economic viability of IL pretreatment-based biorefineries.

bioconversion↗

DOE OSTI2025

Global interfertility and heterosis in sugar kelp populations: a next step in sugar kelp breeding

Abstract The potential of seaweed aquaculture is restricted by high labor, production and processing costs, leading to low economic viability. Selective breeding can improve yields and cultivation efficiency, thereby decreasing production costs. Until now, genetic resources as input for Saccharina latissimabreeding trials have been sourced strictly locally, due to concerns regarding outplanting genetically exogenous material in local waters. Here we study, for the first time, worldwide interregional fertility of the seaweedS. latissima,in order to assess the potential of including globalS. latissimagenetic resources for selective breeding with regard to heterosis. We quantified the yield (as an indicative aquacultural performance) and morphological traits of intra- and interregionalS. latissimahybrids originating from a broad range of locations in a common garden experiment. Our results show that the practical application of worldwideS. latissimagenetic resources in breeding programs is feasible based on global interfertility. We found a wide morphological diversity of hybrids and observed significant heterosis in interregional hybrids. The degree of heterosis could not be linked to geographic distance. These findings reveal that worldwide genetic resources can considerably contribute toS. latissimabreeding programs and could offer a major next step in improving yields and quality traits.

Biotechnology & Applied Microbiology↗

DOE OSTI2024

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Developing an active and stable anode catalyst for the proton exchange membrane water electrolyzer (PEM-WE) is a critical objective to enhance the economic viability of green hydrogen technology. However, the expensive iridium-based electrocatalyst remains the sole practical material with industrial-level stability for the acidic oxygen evolution reaction (OER) at the anode. Ruthenium-based catalysts have been proposed as more cost-effective alternatives with improved activity, though their stability requires enhancement. The current urgent goal is to reduce costs and noble metal loading of the OER catalyst while maintaining robust activity and stability. Here, in this study, we design a Ru-based OER catalyst incorporating Pb as a supporting element. This electrocatalyst exhibits an OER overpotential of 201 mV at 10 mA.cm -2 , simultaneously reducing Ru noble metal loading by similar to 40%. Normalization of the electrochemically active surface area unveils improved intrinsic activity compared to the pristine RuO 2 catalyst. During a practical stability test in a PEM-WE setup, our developed catalyst sustains stable performance over 300 h without notable degradation, underscoring its potential for future applications as a reliable anodic catalyst.

Electrocatalysis↗

DOE OSTI2021

Review of Codes and Standards for Energy Storage Systems

This article identifies several examples of industry efforts and successes in removing gaps in energy storage (ES) Codes & Standards (C&S) by updating or creating and publishing new standards. A particular challenge discussed in this article is that while modern battery technologies including lithium ion (Li-ion) increase technical and economic viability of grid energy storage, newer battery technologies also present new or unknown risks to managing the safety of energy storage systems (ESS). There has been progress in filling gaps in published ES C&S that recognize and address the expanding range of technologies and their unique characteristics. However, there remain significant need and opportunity for researchers to contribute to the underlying knowledge base that informs development of technical references and standards, and ultimately the application of published standards for the effective and safe design and use of modern ESS.

Energy Storage, Codes and Standards↗

DOE OSTI2026

Rare earth element potential in coal and coal ash in the U.S. Gulf Coast

United States heavy reliance on imports of critical minerals (CMs), including rare earth elements (REEs), underscores the importance of development of domestic sources. The study objective was to quantify CM and REE concentrations in coal and coal ash in the US Gulf Coast region. CM and REE concentrations were measured for 118 samples from outcrops and 14 mines in the Gulf Coast. Results show that total REE + Yttrium (REY) concentrations (dry coal basis) are comparable to those of the upper continental crust (UCC) with localized hot spots, such as the Texas Gibbons Creek mine (REY ≤ ~ 2860 ppm). When normalized to UCC REY concentration (169 ppm, dry coal basis), REY to UCC ratios for Gulf Coast coal samples range from 0.1 to 17 (median ratio 0.6). REE extractability from lignites is high (median: 63%–93%) using environmentally benign weak acid. In addition to raw coal, coal ash from power plants could also serve as an REE source with a median ratio of REY in ash relative to coal of 4; however, extractability from coal ash is generally much lower (≤ 5% using the same weak acid as in coal). The median basket price for extracted REY as oxides from coal, assuming 70% extractability, is $\$3.2$ per tonne of coal and $\$186$ billion based on 58 billion metric tonnes of dry coal in the Gulf Coast. REEs important for magnets (Pr + Nd + Tb + Dy) account for ~ 80% of the total value. The corresponding median basket price for extracted REY as oxides from coal ash, assuming ~ 30% extractability, is ~$\$4.4$ per tonne of ash and $\$1.2$ billion based on 258 million tonnes of ash. REE production from coal would likely require co-products, such as activated carbon or humic acids, to attain economic viability. Production of REEs from coal ash could offset remediation costs related to potential water contamination. This reconnaissance study shows the potential for REE production from coal and coal ash in the Gulf Coast; however, carbon coproducts and/or societal benefits would likely be required for socioeconomic viability.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2024

Emerging Technologies for Decarbonizing Silicon Production

Abstract Silicon (Si) is an important material for alloying, solar photovoltaics, and electronics. However, current methods of producing silicon require energy consumption of around 11–13 kWh/kg Si and direct carbon emissions are 4.7–5 tons CO 2 per ton Si which conflicts with global efforts to limit climate change. In this work, we discuss several promising methods for reducing or eliminating carbon emissions from the silicon production process. Such methods include using biocarbon, integrating the current process with carbon capture and utilization/storage (CCU/CCS), metallothermic reduction, hydrogen reduction, and molten salt electrolysis. We present the positive aspects and challenges of each approach. Biocarbon coupled with CCU/CCS is the most industrially mature technology and can be carbon–neutral or -negative but is not carbon-free. Hydrogen directly reducing silicon dioxide is not thermodynamically favorable, but it may be viable to use hydrogen in conjunction with other processes to reduce emissions. Metallothermic and electrochemical methods of production are promising and have the potential to create high-purity silicon with no reduction-related carbon emissions but have only been demonstrated at lab scale. Economic viability will likely be the next determining factor for which technologies are more widely researched and implemented. Graphical Abstract

08 HYDROGEN↗

DOE OSTI2023

Chapter 4 - Pretreatment Technologies for Lignocellulosic Biomass Refineries

Pretreatment is a critical step in processing lignocellulosic biomass into biofuel and bioproducts and is considered the energy and cost center of the biomass conversion process. Although a large number of pretreatment technologies have been developed, not all the techniques are viable on a commercial scale at this stage. Moreover, the technology choice and process conditions depend highly on the type of biomass and the overall biorefinery scheme. This chapter provides an overview of different pretreatment methods, including their mechanism, important process parameters, current status, and challenges. The opportunities associated with new technologies and approaches are presented. Emphasis is placed on low-severity thermal pretreatment technologies. The chapter also provides a brief discussion of the challenges to achieving the economic viability of the technologies on a commercial scale.

BIOMASS FUELS↗

DOE OSTI2024

A Conceptual Design and Economic Assessment of a Chitin Biorefinery Based on Shrimp Processing Wastes

Due to the extensive production of shrimp in captivity, waste generation has increased significantly and has become an environmental problem. The recovery of biomolecules can be an important way to mitigate the environmental problems associated with processing in this sector. In this sense, the present work aimed to evaluate a biorefinery approach for valuing shrimp farming waste to obtain astaxanthin, chitin and chitosan. Stoichiometric segmentation was used as a tool to identify the process steps, whose information on process variables (fresh water consumption, flow rate and reaction conditions) was adapted from the literature. A biorefinery coupled to a shrimp processing plant was proposed for the immediate use of highly perishable biomass, to guarantee the quality of the extracted products and reduce storage and transportation costs. In practice, the biomass treatment sequence adopted (demineralization followed by deproteinization) eliminates the depigmentation step, as the chitin obtained has a lighter tone. The proposed route was evaluated for four scenarios based on two indicators: gross economic potential (EGP) and metrics for inspection of sales and reagents (MISR). The results indicate that economic viability is achieved only for the production of chitosan, resulting in a gross revenue of US$832.50/cycle and a MISR value > 1. The sale of astaxanthin promotes an increase of US$3.73/cycle in the EGP, considered too low for the inclusion of another stage in the process.

astaxanthin↗

DOE OSTI2020

Enhanced carbon-transfer and -utilization efficiencies achieved using membrane carbonation with gas sources having a range of CO 2 concentrations

The economic viability of microalgal biofuels relies on increasing productivity in a cost-effective manner. As microalgal biomass contains > 50% carbon, a high rate of CO 2 delivery is required for high productivity, and inefficient CO 2 delivery amplifies operating costs. Membrane carbonation using non-porous hollow fiber membranes can ideally deliver CO 2 without bubble formation and high carbon transfer efficiency. Because CO 2 streams from industrial resources are not 100% CO 2 , the buildup of inert gasses can significantly lower the CO 2 delivery rate when the distal end of the membrane is closed. To overcome the buildup of inert gases, we managed the distal end of the membranes with three different approaches: fully open end, restricted bleed valve, and restricted bleed valve with pH-actuated venting. For all approaches, CO 2 was delivered to membranes ondemand based on a pH set point. Evaluating a wide range of CO 2 concentrations (10% to 100%), we found that all approaches eliminated the buildup of inert gases, could maintain target pH values and gave the same biomass productivities and carbon distributions. However, carbon transfer efficiency depended on the operation of the distal end. Fully open-end operation gave a poor carbon transfer efficiency because of excessive loss of CO 2 from the distal end. However, restricting the exit flow rate to ≤4 cm 3 /min mitigated the problems of excessive CO 2 loss, but without incurring a large loss of CO 2 -delivery flux. For the continuous cultivation, combining a restricted bleed valve with pH-actuated venting improved the carbon-transfer efficiency and -utilization efficiencies up to 85% and 67%, respectively, with a sufficient CO 2 delivery flux.

42 ENGINEERING↗

DOE OSTI2025

High-burnup boiling water reactor steady-state operating conditions and fuel performance analysis

The primary operational costs for existing nuclear reactors are plant operation costs, maintenance costs, and fuel costs, all of which are influenced by the materials used and the design of the reactor core. Optimizing core design parameters—including burnup limits and enrichment levels—can lengthen cycles, reduce outages, reduce reload batch fractions and spent fuel storage requirements, and lower maintenance and operating expenses, thereby enhancing economic viability. Furthermore, developing higher-fidelity tools to simulate these parameters enables better identification of the available margin, improves overall plant safety, and improves the understanding a given plant’s responses to accident scenarios. Here, in the US, much of the research and development focus has traditionally been on pressurized water reactors (PWRs), but boiling water reactors (BWRs) comprise approximately one-third of the US reactor fleet. Modeling and simulation advances for BWRs and PWRs—particularly those achieved through the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program—are crucial to the long-term viability of the light–water reactor industry. A key research area of the high burnup and increased enriched fuel initiative is focused on addressing issues related to postulated loss-of-coolant accident (LOCA) scenarios. NEAMS has dedicated significant effort to enhancing tools to better support BWRs. A current focus is showcasing the BWR framework for high-burnup LOCA analysis. This high-fidelity steady-state analysis is a first step toward demonstrating a best-estimate, pin-by-pin high-burnup BWR LOCA analysis to assess full-core cladding rupture behavior for a representative BWR. The objective of this effort is to provide a modeling capability that will help elucidate and provide a best-estimate evaluation for cladding rupture susceptibility in BWRs. This modeling capability could then be used to prevent and/or mitigate cladding ruptures in postulated accident scenarios without penalizing operational parameters. Additionally, the results of this work will help identify strategies for finding additional margins or potentially limiting cladding ruptures through core design optimizations to enable more efficient core designs.

Capps, Nathan [Oak Ridge National Laboratory (ORNL↗

DOE OSTI2020

Techno-economic prospects for producing Fischer-Tropsch jet fuel and electricity from lignite and woody biomass with CO 2 capture for EOR

This work explores the prospective techno-economic performance of facilities that produce low- and net-negative-carbon liquid transportation fuels and electricity with CO 2 capture for enhanced oil recovery. The lignite and biomass-to-jet fuel process is based on KBR’s TRIG gasifier, Rectisol (for sulfur removal and CO 2 capture), fixed-bed low temperature Fischer-Tropsch synthesis of liquid fuels, and Brayton/Rankine combined cycles to convert synthesis/refining off-gases and waste heat to electricity. This work leverages a recent, highly-detailed assessment of a prospective first-of-a-kind (FOAK) demonstration facility to develop highly detailed Aspen Plus process simulations for nine prospective N th -of-a-kind (NOAK) plant equipment configurations. Component-level capital costs from the FOAK study are scaled and adjusted to reflective prospective learning-by-doing to estimate capital costs for the NOAK designs. NOAK plant economic performance is found to be largely insensitive to variations in plant configurations and electricity output fraction, but biomass input fraction significantly affects profitability. Facilities that consume only carbon–neutral biomass, with no lignite co-feed, have significantly net-negative carbon emissions and the most favorable prospective economics when carbon emissions are priced. For these facilities, the crude oil price required for plant economic viability falls rapidly from $\$$100/bbl as carbon emission prices increase above $\$$120/tonne CO 2eq . In general, plants that co-fire lignite with biomass are less profitable (than 100% biomass plants) due to their higher net greenhouse gas emissions.

09 BIOMASS FUELS↗

DOE OSTI2020

Techno-economic analysis of the impact of dynamic electricity prices on solar penetration in a smart grid environment with distributed energy storage

This study investigates the technical and economic feasibility of using high levels of solar energy penetration up to 400 MW into a smart grid system of 60,000 smart houses. A novel non-cooperative Stackelberg game is introduced that incorporates the profitability of the supply-side and helps in solving problems related to overgeneration and photovoltaic curtailment. The non-cooperative game is intended to find the optimal dynamic prices that would leverage distributed storage through the demand-side to stabilize the power grid operation. Ten cases are studied with five photovoltaic plant sizes and two battery designs. Here, a novel quantitative analysis of high levels of solar penetration as a percentage of the total electricity demand is introduced to evaluate the technical feasibility of the studied cases. To evaluate the economic viability of the proposed smart grid system, four metrics were used: the levelized cost of energy, the levelized cost of storage, the payback period, and the net present value. Two out of ten studied cases were concluded to be the most promising cases, one with a solar photovoltaic plant size of 200 MW and the other with 300 MW. The case with 300 MW solar plant is preferred as it paves the way for more solar energy deployment with a solar penetration percentage up to 67.78%. This case had a payback period of 10.72 years and a net present value of $\$51.44$ M for the solar plant and a payback period of 12.06 years and a net present value of $\$40.75$ M for the demand-side.

14 SOLAR ENERGY↗

DOE OSTI2020

The critical role of lignin in lignocellulosic biomass conversion and recent pretreatment strategies: A comprehensive review

Heterogeneity and rigidity of lignocellulose causing resistance to its deconstruction have provided technical and economic challenges in the current biomass conversion processes. Lignin has been considered as a crucial recalcitrance component in biomass utilization. An in-depth understanding of lignin properties and their influences on biomass conversion can provide clues to improve biomass utilization. Also, utilization of lignin can significantly increase the economic viability of biorefinery. Recent lignin-targeting pretreatments have aimed not only to overcome recalcitrance for biomass conversion but also to selectively fractionate lignin for lignin valorization. Numerous studies have been conducted in biomass characteristics and conversion technologies, and the role of lignin is critical for lignin valorization and biomass pretreatment development. In this review, we provide a comprehensive review of lignin-related biomass characteristics, the impact of lignin on the biological conversion of biomass, and recent lignin-targeting pretreatment strategies. The desired lignin properties in biorefinery and future pretreatment directions are also discussed.

09 BIOMASS FUELS↗