Search NASA⌕ Search

SEARCH · Search NASA

Results for “effectiveness factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1951

Determination and Use of the Local Recovery Factor for Calculating the Effectiveness Gas Temperature for Turbine Blades / Jack B. Esgar and Alfred L. Lea

In an in experimental investigation of local recovery factors for a blade having a pressure distribution similar to that of a typical reaction-type turbine blade, it a was found that the recovery factors were essentially independent of Mach number, Reynolds number, pressure gradient, and position on the blade surface except for regions where the boundary layer was probably in the transition range from laminar to turbulent. The recommended value of local subsonic recovery factor for use in calculating the effective gas temperature for gas turbine blades was 0.89.

HEAT TRANSFER, CASCADES↗
DOE OSTI2024

Investigation of the Impact of TSL Data Libraries and Geometry Variations on the MSRE Benchmark

The increasing demand for green, low-carbon energy solutions has amplified the focus on advanced nuclear reactor technologies. Among these, Molten Salt Reactors (MSRs) have been spotlighted because of their special features. Historically, Oak Ridge National Laboratory (ORNL) started the Molten Salt Reactor Experiment (MSRE) in 1956. Later, ORNL and the University of California, Berkeley (UCB) jointly developed the MSRE benchmark. This was then reviewed by the International Reactor Physics Experiment Evaluation Project (IRPhEP) committee and added to their 2019 handbook. In the current study, the benchmark model was recreated via the Serpent code. The calculated effective multiplication factor was 1.02087 ± 0.00019, which gives a deviation of about 2000 pcm compared to the benchmark/experimental result. At North Carolina State University (NCSU), recent evaluations were conducted on thermal scattering cross sections for molten salt FLiBe and 20% porous nuclear graphite, anticipated for incorporation in the ENDF/B-VIII.1 library. The influences of these thermal scattering law (TSL) data and geometry changes on the multiplication factor were examined using the ENDF/B-VII.1 and ENDF/B-VIII.0 libraries. Introducing the TSL data for FLiBe and 20% porous graphite resulted in an effective multiplication factor of +270 pcm compared to the reference value obtained with ENDF/B-VII.1 in this study. The adjustment of the reactor vessel dimensions resulted in decrease of -448 pcm in the calculated effective multiplication factor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Integer quantum Hall effect and enhanced g factor in quantum-confined Cd 3 As 2 films

Here, we investigate the integer quantum Hall effect in Cd 3 ⁢As 2 thin films under conditions of strong to moderate quantum confinement (thicknesses of 10, 12, and 15 nm). In all the films, we observe the integer quantum Hall effect in the spin-polarized lowest Landau level (filling factor v = 1) and at spin-degenerate higher index Landau levels with even filling factors (v = 2,4,6). With increasing quantum confinement, we also observe a lifting of the Landau-level spin degeneracy at v = 3, manifest as the emergence of an anomaly in the longitudinal and Hall resistivities. Tight-binding calculations show that the enhanced g factor likely arises from a combination of quantum confinement and corrections from nearby subbands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Effect Laws of Different Factors on Levitation Characteristics of High-T{sub c} Superconducting Maglev System with Numerical Solutions

The interaction between the high-temperature superconducting (HTS) bulk and permanent magnet guideway (PMG) has been a topic among the existing HTS magnetic levitation systems. Up to now, the theories about the electromagnetic and force characteristics have been relatively consummated. Here, using the finite element model by COMSOL Multiphysics 5.3a, we investigated the impact of the intrinsic and external factors on the levitation characteristics of HTS maglev systems, the application laws are concluded. Factors including the critical current density and geometric dimensions of the bulk superconductor, as well as the moving velocity, are discussed. The effects of the multiple back and forth movements are also analyzed. By comparing calculation results of the distributions of the induced current and the levitation force of the bulk superconductor, we can clearly confirm the effect laws of various factors on the electromagnetic characteristics and levitation force. These observations support the physical parameters that are difficult to be tested by experiments. And they also have a significant contribution to the experimental condition selections and optimization of the high-temperature superconducting magnetic levitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2002

Developmental regulation of the effects of fibroblast growth factor-2 and 1-octanol on neuronogenesis: implications for a hypothesis relating to mitogen-antimitogen opposition

Neocortical neurons arise from a pseudostratified ventricular epithelium (PVE) that lies within the ventricular zone (VZ) at the margins of the embryonic cerebral ventricles. We examined the effects of fibroblast growth factor-2 (FGF-2) and 1-octanol on cell output behavior of the PVE in explants of the embryonic mouse cerebral wall. FGF-2 is mitogenic and 1-octanol antimitogenic in the PVE. Whereas all postmitotic cells migrate out of the VZ in vivo, in the explants some postmitotic cells remain within the VZ. We refer to these cells as the indeterminate or I fraction, because they neither exit from the VZ nor reenter S phase as part of the proliferative (P) fraction. They are considered to be either in an extremely prolonged G(1) phase, unable to pass the G(1)/S transition, or in the G(0) state. The I fate choice is modulated by both FGF-2 and 1-octanol. FGF-2 decreased the I fraction and increased the P fraction. In contrast, 1-octanol increased the I fraction and nearly eliminated the P fraction. The effects of FGF-2 and 1-octanol were developmentally regulated, in that they were observed in the developmentally advanced lateral region of the cerebral wall but not in the medial region. Copyright 2002 Wiley-Liss, Inc.

NASA Discipline Developmental Biology↗
DOE OSTI2020

(U) Endpoint Energy and Scintillator Geometry Effects on the Swank Factor, Quantum Efficiency, and DQE(0) for High-Energy Radiography

High-energy radiography is used to image imploding materials to better understand weapon design and performance. The Enhanced Capabilities for Subcritical Experiments (ECSE) is a new facility proposal that aims to collect radiographic images of nuclear material. As part of the facility design, we aim to optimize data quality and radiographic performance by investigating different detector designs. We addressed design decisions by simulating different scintillator designs using M CNP6 and calculated the quantum efficiency, Swank factor, and detective quantum efficiency at zero-frequency (DQE(O)). First, we investigated the effects of the x-ray endpoint energy on the detector response. We generated three x-ray spectra with endpoint energies of 20 MeV, 22 MeV, and 24 MeV. The three raw spectra were filtered using the Dual-Axis Radiographic Hydrodynamic Test facility (DARHT) line-of-sight materials along with 1) flat field filtration using 7 cm tungsten alloy in the bullnose and 2) an FTO with 4 plates. The scatter-to-direct radiation ratio was much larger for FTO with 4 plates (50-60%) compared to the flat field with 7 cm of bullnose material (8%). We used these filtered spectra to calculate the detector response for the original DARHT segmented scintillator design. We found that the endpoint energy and filtration had a negligible effect on the detector response. The quantum efficiency was 0.63, the Swank factor was 0.84, and the DQE(O) was 0.53 for all six spectra.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Magnetic breakdown and spin-zero effect in quantum oscillations in kagome metal CsV3Sb5

Abstract In the recently discovered kagome metal CsV 3 Sb 5 , an intriguing proposal invoking a doped Chern insulator state suggests the presence of small Chern Fermi pockets hosting spontaneous orbital-currents and large orbital magnetic moments. While the net thermodynamic magnetization is nearly insensitive to these moments, due to their antiferromagnetic alignment, their presence can be revealed by the Zeeman effect, which shifts electron energies in magnetic fields with a proportionality given by the effective g −factor. Here, we determine the g -factor using the spin-zero effect in magnetic quantum oscillations. A large g -factor enhancement is visible only in magnetic breakdown orbits between conventional and concentrated Berry curvature Fermi pockets that host large orbital moments. Such Berry-curvature-generated large orbital moments are almost always concealed by other effects. In this system, however, magnetic breakdown orbits due to the proximity to a conventional Fermi-surface section allow them to be visibly manifested in magnetic quantum oscillations. Our results provide a remarkable example of the interplay between electronic correlations and more conventional electronic bands in quantum materials.

36 MATERIALS SCIENCE↗
NASA NTRS2006

Uncertainty Analysis for a Jet Flap Airfoil

An analysis of variance (ANOVA) study was performed to quantify the potential uncertainties of lift and pitching moment coefficient calculations from a computational fluid dynamics code, relative to an experiment, for a jet flap airfoil configuration. Uncertainties due to a number of factors including grid density, angle of attack and jet flap blowing coefficient were examined. The ANOVA software produced a numerical model of the input coefficient data, as functions of the selected factors, to a user-specified order (linear, 2-factor interference, quadratic, or cubic). Residuals between the model and actual data were also produced at each of the input conditions, and uncertainty confidence intervals (in the form of Least Significant Differences or LSD) for experimental, computational, and combined experimental / computational data sets were computed. The LSD bars indicate the smallest resolvable differences in the functional values (lift or pitching moment coefficient) attributable solely to changes in independent variable, given just the input data points from selected data sets. The software also provided a collection of diagnostics which evaluate the suitability of the input data set for use within the ANOVA process, and which examine the behavior of the resultant data, possibly suggesting transformations which should be applied to the data to reduce the LSD. The results illustrate some of the key features of, and results from, the uncertainty analysis studies, including the use of both numerical (continuous) and categorical (discrete) factors, the effects of the number and range of the input data points, and the effects of the number of factors considered simultaneously.

Green, Lawrence L.↗
NASA NTRS1980

Computer modeling of high-efficiency solar cells

Transport equations which describe the flow of holes and electrons in the heavily doped regions of a solar cell are presented in a form that is suitable for device modeling. Two experimentally determinable parameters, the effective bandgap shrinkage and the effective asymmetry factor are required to completely model the cell in these regions. Nevertheless, a knowledge of only the effective bandgap shrinkage is sufficient to model the terminal characteristics of the cell. The results of computer simulations of the effects of heavy doping are presented. The insensitivity of the terminal characteristics to the choice of effective asymmetry factor is shown along with the sensitivity of the electric field and quasielectric fields to this parameter. The dependence of the terminal characteristics on the effective bandgap shrinkage is also presented.

Schartz, R. J.↗
NASA NTRS1982

The effects of pilot stress factors on handling quality assessments during US/German helicopter agility flight tests

Flight tests were conducted with two helicopters to study and evaluate the effects of helicopter characteristics and pilot and task demands on performance in nap-of-the-Earth flight. Different, low-level slalom courses were set up and were flown by three pilots with different levels of flight experience. A pilot rating questionnaire was used to obtain redundant information and to gain more insight into factors that influence pilot ratings. The flight test setups and procedures are described, and the pilot ratings are summarized and interpreted in close connection with the analyzed test data. Pilot stress is discussed. The influence of demands on the pilot, of the helicopter characteristics, and of other stress factors are outlined with particular emphasis on how these factors affect handling-qualities assessment.

Pausder, H. J.↗
NASA NTRS1982

The effects of pilot stress factors on handling quality assessments during US/German helicopter agility flight tests

Flight tests were conducted with two helicopters to study and evaluate the effects of helicopter characteristics and pilot and task demands on performance in nap-of-the-earth flight. Different, low-level slalom courses were set up and were flown by three pilots with different levels of flight experience. A pilot rating questionnaire was used to obtain redundant information and to gain more insight into factors that influence pilot ratings. The flight test setups and procedures are described, and the pilot ratings are summarized and interpreted in close connection with the analyzed test data. Pilot stress is discussed. The influence of demands on the pilot, of the helicopter characteristics, and of other stress factors are outlined with particular emphasis on how these factors affect handling-qualities assessment. Previously announced in STAR as N83-13114

Pausder, H.-J.↗
DOE OSTI2018

Nuclear Recoil Effect on the g Factor of Middle-Z Boronlike Ions

The nuclear recoil correction to the g factor of boronlike ions is evaluated within the lowest-order relativistic (Breit) approximation. The interelectronic-interaction effects are taken into account to the first order of the perturbation theory in 1/Z. Higher orders in 1/Z are partly accounted for by means of the effective screening potential. The most accurate up-to-date values of this contribution are presented for the ions in the range Z = 10–20.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Analysis of a Heat Balance Experiment in the TREAT Reactor with SPARTA and OpenMC

This article presents the interpretation of a heat balance experiment in TREAT using the SPARTA methodology and an OpenMC model. The study examines the effects of control rods and temperature variations on the effective multiplication factor ($k_{\rm eff}$) and correction factors. Results indicate that both core temperature and rod positions have a linear effect on $k_{\rm eff}$ and correction factors in the upper-west channel. A critical hypothesis of SPARTA was validated: reactivities and correction factors can be obtained by linearly combining individual effects. The previously considered negligible effect of temperature on correction factors was found to be significant, necessitating updates to the SPARTA methodology. By fitting an exponential curve to mean temperature data, SPARTA's accuracy and convergence have been improved. Comparisons between SPARTA and OpenMC showed consistent reactivity removal due to temperature increase. While SPARTA effectively interprets complex transients, simpler methods may suffice when correction factors have minimal influence on reactivity calculations.

73 - NUCLEAR PHYSICS AND RADIATION PHYSICS↗