Search NASA⌕ Search

SEARCH · Search NASA

Results for “electromagnetic responses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Electromagnetically-tracked free-mass gravitational wave antennas

The response to a gravitational wave of two free masses whose relative motion is monitored with an electromagnetic tracking signal is derived. The results indicate a two-feature signature in one-way data and a three-feature signature in two-way data. The effect is applied to gravitational wave experiments using laser interferometers, spacecraft Doppler tracking, planetary ranging, and pulsar timing analysis. Actual results are presented from spacecraft Doppler experiments and from pulsar timing data analysis, with new upper limits being set on a possible cosmic gravitational wave background via the pulsar data.

Hellings, R. W.↗
DOE OSTI2023

Vibrational Probe at the Electrochemical Interface: Dependence on Plasmon Coupling and Potential of the Lineshape in Two-Dimensional Infrared Spectroscopy

Two-dimensional infrared spectroscopy of vibrational probes at an electrode surface shows promise for studying the structural dynamics at an active electrochemical interface. This interface is a complex environment where the solution structures in response to the applied potential. A strategy for achieving the necessary monolayer sensitivity is to use a plasmonically active electrode, which enhances the electromagnetic fields that produce the spectroscopic response. Here, in this study, we show how the coupling between the plasmon and the vibrations of the molecular monolayer impacts the FTIR and 2D IR spectroscopy, with an emphasis on the electrochemical potential difference spectra. We show how mixing between the vibrational and plasmonic states gives rise to the distortions that are observed in these measurements. This provides an important step toward 2D IR measurements of vibrational probes at the electrochemical interface as a tool for probing the structural dynamics in the double layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Active Plasmonics and Active Chiral Plasmonics through Orientation-Dependent Multipolar Interactions

While most active plasmonic efforts focus on responsive metamaterials to modulate optical response, we present a simple alternative based on applied orientation control that can likely be implemented for many passive plasmonic materials. Passive plasmonic motifs are simpler to prepare but cannot be altered postfabrication. Here, we show that such systems can be easily manipulated through substrate orientation control to generate both active plasmonic and active chiral plasmonic responses. Using gold nanocrescents as our model platform, we demonstrate tuning of optical extinction from -21% to +36% at oblique incidence relative to normal incidence. Variation of substrate orientation in relation to incident polarization is also demonstrated to controllably switch chiroptical handedness (e.g., Δg = ± 0.55). These active plasmonic responses arise from the multipolar character of resonant modes. In particular, we correlate magnetoelectric and dipole–quadrupole polarizabilities with different light-matter orientation-dependence in both near- and far-field localized surface plasmon activity. Additionally, the attribution of far-field optical response to higher-order multipoles highlights the sensitivity offered by these orientation-dependent characterization techniques to probe the influence of localized electromagnetic field gradients on a plasmonic response. The sensitivity afforded by orientation-dependent optical characterization is further observed by the manifestation in both plasmon and chiral plasmon responses of unpredicted structural nanocrescent variance (e.g., left- and right-tip asymmetry) not physically resolved through topographical imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quasielastic lepton scattering and back-to-back nucleons in the short-time approximation

Understanding quasielastic electron- and neutrino-scattering from nuclei has taken on new urgency with current and planned neutrino oscillation experiments, and with electron scattering experiments measuring specific final states, such as those involving nucleon pairs in “back-to-back” configurations. Accurate many-body methods are available for calculating the response of light (A ≤ 12) nuclei to electromagnetic and weak probes, but they are computationally intensive and only applicable to the inclusive response. In the present work we introduce a novel approach, based on realistic models of nuclear interactions and currents, to evaluate the short-time (high-energy) inclusive and exclusive response of nuclei. The approach accounts reliably for crucial two-nucleon dynamics, including correlations and currents, and provides information on back-to-back nucleons observed in electron and neutrino scattering experiments. We demonstrate that in the quasielastic regime and at moderate momentum transfers both initial- and final-state correlations, and two-nucleon currents are important for a quantitatively successful description of the inclusive response and final state nucleons. Finally, the approach can be extended to include relativistic—kinematical and dynamical—effects, at least approximately in the two-nucleon sector, and to describe the response in the resonance-excitation region.

6 ≤ A ≤ 19↗
DOE OSTI2021

PLC-based Impedance Measurement and Current Injection Response Analysis

Studying and mitigating the vulnerabilities of Programmable Logic Controllers (PLCs) to electromagnetic pulse is important for the reliability of the power system. In this paper, an effective impedance measurement scheme is proposed to estimate the susceptibility of PLCs to an electromagnetic pulse. The equivalent non-uniform transmission line model is established to eliminate the impact of the fixture in the de-embedding process. Based on the measured impedance, the equivalent circuit is established to calculate the response of the device when subjected to the electromagnetic pulse. The voltage and current responses of different interfaces are compared utilizing the developed pulse Current Injection (CI) method. Finally, the impedance measurement scheme is verified through testing using three measuring instruments. And the CI simulation experiments reveal the characteristics and susceptibilities of different PLCs interfaces, indicating that some protection measures are required for the reliable operation of PLC.

Qiu, Wei↗
NASA NTRS2008

Electromagnetic Compatibility Analysis Group VA-H3

During the eight weeks working at NASA, I was fortunate enough to work with the Expendable Launch Vehicle's (ELV) Electromagnetic Compatibility (EMC) Team, who is responsible for the evaluation and analysis of any EMI risk an ELV mission might face. This group of people concern themselves with practically any form of electromagnetic interference that may risk the safety of a rocket, a mission, or even people. Taking this into consideration, the group investigates natural forms of interference, such as lightning, to manmade interferences, such as antennas.

Armanda, Carlos A.↗
DOE OSTI2020

The NOvA Test Beam Program

NOvA is a long-baseline oscillation neutrino experiment designed to study and measure a wide range of important topics for neutrino physics such as the neutrino mixing parameters, the neutrino mass hierarchy, and CP violation in the lepton sector. The NOvA Test Beam experiment uses a scaled-down detector of 30 tons to analyze tagged beamline particles. A new tertiary beamline deployed at Fermilab can select and identify electrons, muons, pions, kaons and protons with momenta from 0.2 to 2 GeV/c. Using these data, the Test Beam program will provide NOvA with a better understanding of the largest systematic uncertainties impacting the analyses, including the detector response, calibration, and hadronic and electromagnetic energy resolution. The status and future plans for the NOvA Test beam program, along with preliminary results, are presented in these Proceedings.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Model Reduction by Generalized Falk Method for Efficient Field-Circuit Simulations

The Generalized Falk Method (GFM) for coordinate transformation, together with two model-reduction strategies based on this method, are presented for efficient coupled field-circuit simulations. Each model-reduction strategy is based on a decision to retain specific linearly-independent vectors, called trial vectors, to construct a vector basis for coordinate transformation. The reduced-order models are guaranteed to be stable and passive since the GFM is a congruence transformation of originally symmetric positive definite systems. We also show that, unlike the Pad´e-via-Lanczos (PVL) method, the GFM does not generate unstable positive poles while reducing the order of circuit problems. Further, the proposed GFM is also faster when compared to methods of the type Lanczos (or Krylov) that are already widely used in circuit simulations for electrothermal and electromagnetic problems. The concept of response participation factors is introduced for the selection of the trial vectors in the proposed model-reduction methods. Further, we present methods to develop simple equivalent circuit networks for the field component of the overall field-circuit system. The implementation of these equivalent circuit networks in circuit simulators is discussed. With the proposed model-reduction strategies, significant improvement on the efficiency of the generalized Falk method is illustrated for coupled field-circuit problems.

42 ENGINEERING↗
DOE OSTI2025

GRB 221009A: The B.O.A.T. Burst that Shines in Gamma Rays

We present a complete analysis of Fermi Large Area Telescope (LAT) data of GRB 221009A, the brightest gamma-ray burst (GRB) ever detected. The burst emission above 30 MeV detected by the LAT preceded, by 1 s, the low-energy (<10 MeV) pulse that triggered the Fermi Gamma-Ray Burst Monitor (GBM), as has been observed in other GRBs. The prompt phase of GRB 221009A lasted a few hundred seconds. It was so bright that we identify a bad time interval of 64 s caused by the extremely high flux of hard X-rays and soft gamma rays, during which the event reconstruction efficiency was poor and the dead time fraction quite high. The late-time emission decayed as a power law, but the extrapolation of the late-time emission during the first 450 s suggests that the afterglow started during the prompt emission. We also found that high-energy events observed by the LAT are incompatible with synchrotron origin, and, during the prompt emission, are more likely related to an extra component identified as synchrotron self-Compton (SSC). A remarkable 400 GeV photon, detected by the LAT 33 ks after the GBM trigger and directionally consistent with the location of GRB 221009A, is hard to explain as a product of SSC or TeV electromagnetic cascades, and the process responsible for its origin is uncertain. Because of its proximity and energetic nature, GRB 221009A is an extremely rare event.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1968

Alternating current electromagnetic servo induction meter

Electromagnetic device accurately indicates the responses of various sensors in high performance flight research aircraft to conditions encountered in flight. The device responds to sensor inputs to move a slideable armature along an indicator scale by the force of currents induced in the armature winding.

Bogue, R. K.↗
NASA NTRS1973

Electromagnetic wave energy converter

Electromagnetic wave energy is converted into electric power with an array of mutually insulated electromagnetic wave absorber elements each responsive to an electric field component of the wave as it impinges thereon. Each element includes a portion tapered in the direction of wave propagation to provide a relatively wideband response spectrum. Each element includes an output for deriving a voltage replica of the electric field variations intercepted by it. Adjacent elements are positioned relative to each other so that an electric field subsists between adjacent elements in response to the impinging wave. The electric field results in a voltage difference between adjacent elements that is fed to a rectifier to derive dc output power.

Bailey, R. L.↗
NASA NTRS1973

Optimum detection of an optical image on a photoelectric surface.

The image-detecting performance of an optimum counting detector is compared with that of a threshold detector and that of a detector basing its decisions on the total number of photoelectrons from a finite area of the image. The illuminance of the image is assumed to have a Gaussian spatial distribution. The optimum detector works with the pristine datum (and not with the photoelectric response) which is the spatiotemporal electromagnetic field at the aperture of the observing optical instrument. It is shown that little is to be gained by using details of the illuminance distribution beyond the crude knowledge of its breadth as embodied in a simple counter of emitted photoelectrons. All three detectors exhibit accordingly about the same reliability.

Helstrom, C. W.↗
NASA NTRS1983

NASA F-106B lightning tests

Lightning simulation ground tests conducted on the NASA F-106B research aircraft to elicit natural strikes are summarized. The purpose of the test program was to measure the response of the aircraft's electromagnetic sensors and interior wire circuits to a controlled ground test environment that simulates the electromagnetic effects of a lightning strike. Both direct attachment and radiated field tests were conducted. In most cases, the aircraft's engine was running and test data were gathered simultaneously from NASA and MCAIR sensors on both the aircraft's own instrumentation system and the remote MCAIR computer-controlled data acquisition system. During the direct attachment tests, the input inductance, output condition (hard-wired or spark gap), and the output location were varied to provide a wide variety of test conditons. The radiated tests to the isolated aircraft were conducted to excite and measure the natural resonances of the F-106B aircraft.

Heady, B. D.↗
NASA NTRS2016

Development of Shape Memory Alloys- Challenges and Solutions

Shape memory alloys (SMAs) are a unique class of multifunctional materials that have the ability to recover large deformations or generate high stresses in response to thermal, mechanical andor electromagnetic stimuli. These abilities have made them a viable option for actuation systems in aerospace, medical, and automotive applications, amongst others. However, despite many advantages and the fact that SMA actuators have been developed and used for many years, so far they have only found service in a limited range of applications. In order to expand their applications, further developments are needed to increase their reliability and stability and to address processing, testing and qualification needed for large-scale commercial application of SMA actuators. In this seminar, historical inhibitors of SMA applications and current research efforts by NASA Glenn Research Center and collaborators will be discussed. Relationships between fundamental physicalscientific understanding, and the direct transition to engineering and design of mechanisms using these novel materials will be highlighted. Examples will be presented related to targeted alloy development, microstructural control, and bulk-scale testing as a function of stresses, temperatures and harsh environments. The seminar will conclude with a summary of SMA applications under development and current advances.

Shape Memory Alloy↗
NASA NTRSDate not supplied

Variety in the Variability of Accreting Supermassive Binary Black Holes

Accreting supermassive binary black holes are key multi-messenger sources for LISA, yet are challenging to simulate realistically as solving the radiation magnetohydrodynamics (MHD) equations over the full dynamic spatio-temporal range of the problem is computationally infeasible at present. We report on our collaboration's progress simulating these systems using general relativistic MHD simulations and dynamic GR. In order to cover a larger temporal range in one set of simulations, we constrain our view to the circumbinary disk region and measure the effects binary mass ratio, accretion disk size, and black hole spin have on the structure and variability of the accretion flow. We particularly emphasize how these parameters influence the overdensity feature, which orbits the binary near the edge of the cavity, since it is responsible for most of the electromagnetic emission's variability and variability is a key signature of a system being a binary. Extending to smaller length scales, we will report on simulations following accretion all the down to the event horizons so that we can begin to investigate how black hole spin affects mini-disk dynamics, accretion rate, and jet power.

Scott C Noble↗
NASA NTRS2020

Shape Memory Alloys – Not Your Ordinary Metal

Sixty years after the discovery of shape memory alloys (SMAs), many actuation and structural applications using these materials have been conceived and developed. SMAs are a unique class of multifunctional materials that have the ability to recover large deformations and generate high stresses in response to thermal, mechanical and/or electromagnetic stimuli. These abilities have made them a viable option for actuation/structural systems in aerospace applications, amongst others. However, designing with SMAs is a paradigm shift from the conventional way we look at metals and mechanisms. In this course, you will learn how the unique properties of SMAs can be applied to designing mechanisms and the associated benefits. Basic primer will be provided on what they are and why they work with examples of the most successful applications that have been imagined. Common design tool and properties-database will be discussed.

Othmane Benafan↗
NASA NTRS2021

Variety in the Variability of Accreting Supermassive Binary Black Holes

Accreting supermassive binary black holes are key multi-messenger sources for LISA, yet are challenging to simulate realistically as solving the radiation magnetohydrodynamics (MHD) equations over the full dynamic spatio-temporal range of the problem is computationally infeasible at present. We will provide a brief summary of the the progress made in the field to understand these systems theoretically and what new directions groups are pursuing. We will also report on our collaboration's progress to simulate these systems using general relativistic MHD and dynamic GR. In order to cover a larger temporal range in one set of simulations, we constrain our view to the circumbinary disk region and measure how the binary mass ratio, accretion disk size, and black hole spin have on the structure and variability of the accretion flow. We particularly emphasize how these parameters influence the overdensity feature, which orbits the binary near the edge of the cavity, since it is responsible for most of the electromagnetic emission's variability and variability is a key signature of a system being a binary. Extending to smaller length scales, we will report on simulations following accretion all the down to the event horizons so that we can begin to investigate how black hole spin affects mini-disk dynamics, accretion rate, and jet power. The novel computational methods enabling inclusion of the black holes in the domain, including multi-patch methods, will be described.

Scott C Noble↗