Search NASA⌕ Search

SEARCH · Search NASA

Results for “emerging modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

An Optimization-Based Strategy for SAV Fleet Repositioning

With the emergence of autonomous technology, shared autonomous vehicles (SAVs) will potentially be the prevalent transportation mode for urban mobility. On one hand, relying on SAV fleets can provide several operational benefits. On the other hand, SAVs can increase travel distance and add congestion due to unoccupied trips such as pickup and repositioning trips. One important aspect for a SAV fleet's success is to serve the incoming requests at reasonably low waiting time. This is achieved by an adequate fleet size that is spatially distributed thoughtfully so that incoming requests can be served by a nearby vehicle. Unfortunately, it is challenging to keep a satisfactory spatial distribution of vehicles due to imbalances in the origin and destination patterns of incoming requests. This paper focuses on the impact of SAV relocation on traveler wait times using a novel optimization-based algorithm for repositioning. POLARIS, an agent-based tool, is used for a case study of Bloomington, Illinois to quantify the benefits of allowing SAV repositioning. On average, the wait times were around 20% lower with repositioning for all adequate fleet sizes. SAVs were available more uniformly across the region's zones, and proportional to trip-making at different times of day. In addition, enabling repositioning led to a higher share of demands being served. These benefits, however, are achieved at the expense of 6% added vehicles miles traveled.

Agent-Based Simulation↗

A novel class of broad-spectrum active-site-directed 3C-like protease inhibitors with nanomolar antiviral activity against highly immune-evasive SARS-CoV-2 Omicron subvariants

Antivirals with broad coronavirus activity are important for treating high-risk individuals exposed to the constantly evolving SARS-CoV-2 variants of concern (VOCs) as well as emerging drug-resistant variants. We developed and characterized a novel class of active-site-directed 3-chymotrypsin-like protease (3CLpro) inhibitors (C2-C5a). Our lead direct-acting antiviral (DAA), C5a, is a non-covalent, non-peptide with a dissociation constant of 170 nM against recombinant SARS-CoV-2 3CLpro. The compounds C2-C5a exhibit broad-spectrum activity against Omicron subvariants (BA.5, BQ.1.1, and XBB.1.5) and seasonal human coronavirus-229E infection in human cells. Notably, C5a has median effective concentrations of 30-50 nM against BQ.1.1 and XBB.1.5 in two different human cell lines. X-ray crystallography has confirmed the unique binding modes of C2-C5a to the 3CLpro, which can limit virus cross-resistance to emerging Paxlovid-resistant variants. We tested the effect of C5a with two of our newly discovered host-directed antivirals (HDAs): N-0385, a TMPRSS2 inhibitor, and bafilomycin D (BafD), a human vacuolar H+-ATPase [V-ATPase] inhibitor. We demonstrated a synergistic action of C5a in combination with N-0385 and BafD against Omicron BA.5 infection in human Calu-3 lung cells. Our findings underscore that a SARS-CoV-2 multi-targeted treatment for circulating Omicron subvariants based on DAAs (C5a) and HDAs (N-0385 or BafD) can lead to therapeutic benefits by enhancing treatment efficacy. Furthermore, the high-resolution structures of SARS-CoV-2 3CLpro in complex with C2-C5a will facilitate future rational optimization of our novel broad-spectrum active-site-directed 3C-like protease inhibitors.

3CLpro inhibitor↗

Terahertz-field activation of polar skyrons

Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuity at the nanometer scale with nontrivial topology, leading to previously unexplored collective modes. Here, using terahertz-field excitation and femtosecond x-ray diffraction, we discover subterahertz collective modes, dubbed “skyrons”, which appear as swirling patterns of atomic displacements functioning as atomic-scale gearsets. The key to activating skyrons is the use of the THz field that couples primarily to skyrmion domain walls. Momentum-resolved time-domain measurements of diffuse scattering reveal an avoided crossing in the dispersion relation of skyrons. Atomistic simulations and dynamical phase-field modeling provide microscopic insights into the three-dimensional crystallographic and polarization dynamics. The amplitude and dispersion of skyrons are demonstrated to be controlled by sample temperature and electric-field bias. The discovery of skyrons and their coupling with terahertz fields opens avenues for ultrafast control of topological polar structures.

ferroelectrics↗

Dynamics of vacancy-induced modes in the non-Abelian Kitaev spin liquid

Here, we study the dynamical response of vacancy-induced quasiparticle excitations in the site-diluted Kitaev spin liquid with a magnetic field. Due to the flux-binding effect and the emergence of dangling Majorana fermions around each spin vacancy, the low-energy physics is governed by a set of vacancy-induced quasi-zero-energy modes. These localized modes result in unique characteristics of the dynamical spin correlation functions, which intriguingly mimic the single-quasiparticle density of states and further exhibit a quasi-zero-frequency peak. By recognizing the potential observability of these local correlation functions via scanning tunneling microscopy (STM), we show how the STM response is sensitive to the local flux configuration, the magnetic field strength, and the vacancy concentration. Constructing a simple model of the localized modes, we also elucidate how the local correlation functions can be interpreted in terms of the hybridization between these modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Draft Prototype Microreactor Transportation Safety Program

Microreactors are compact reactors capable of producing less than 50 megawatts of electrical energy. Typically, these reactors are factory-fabricated and designed to be easily transportable by truck, rail, vessel, or air. Microreactor designs often assume that the unit can be transported containing either unirradiated or irradiated fuel. The interest in microreactors is driven by several factors, including the need to generate power on at remote locations, at military installations, at facilities such as data centers, and in areas recovering from natural disasters. The U.S. Department of Defense is actively pursuing the microreactor concept to meet the increasing energy demands of military operations that require portable and dense power sources. Commercial vendors are also exploring microreactor concepts. The report Microreactor Transportation Emergency Planning Challenges (Maheras et al. 2024) outlined the emergency planning challenges associated with the transportation of microreactors by road, rail, and by barge/ship. The successful commercial deployment and redeployment of microreactors will also require the development of microreactor transportation safety programs. The elements in these safety programs are not specific to microreactors; however, the transport of microreactors may pose unique challenges in these areas. This report builds on the report Microreactor Transportation Emergency Planning Challenges (Maheras et al. 2024) and develops the elements of a prototype microreactor transportation safety program that describes the elements that should be contained vendor-developed microreactor transportation safety programs, identifying the unique elements associated with microreactor transport. This will provide vendors and their transportation contractors a basis for their transportation planning and will accelerate the commercial deployment and redeployment of microreactors by identifying those issues unique to microreactor transport. The emphasis of this report is on highway transport of microreactors. This is based on a U.S. Nuclear Regulatory Commission transportation package approval strategy of crawl-walk-run, where transport by highway is evaluated first (Coles et al. 2021, 2024, Maheras et al. 2021), then other surface modes (rail and barge/ship), and finally air transport. Evaluation of maritime transport of microreactors was recently initiated (Rigato et al. 2024, Maheras et al. 2025). The report first discusses microreactors in general and microreactor transportation safety program planning assumptions. The report then provides a description of the transportation safety planning process and provides an extensive discussion of the elements of transportation safety programs. Specific elements examined included transportation roles and responsibilities, transportation planning, transportation mode and route selection, carrier selection, transportation packaging, advance notification of shipments, public information and communications, emergency response plans and procedures, inspections, security, safe parking, shipment tracking, weather and road conditions, medical preparedness, training and exercises, and program evaluation. The report then identifies the unique elements of a transportation safety program associated with microreactor transport. These unique elements were in the areas of: the unusual nature of microreactor designs, compensatory measures, increased radiation dose rates in the vicinity of microreactors, transportation package approval versus 10 CFR 50.59, and the use of a risk-informed transportation package approval process.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Partons as unique ground states of quantum Hall parent Hamiltonians: The case of Fibonacci anyons

We present microscopic, multiple Landau level, (frustration-free and positive semi-definite) parent Hamiltonians whose ground states, realizing different quantum Hall fluids, are parton-like and whose excitations display either Abelian or non-Abelian braiding statistics. We prove ground state energy monotonicity theorems for systems with different particle numbers in multiple Landau levels, demonstrate S-duality in the case of toroidal geometry, and establish complete sets of zero modes of special Hamiltonians stabilizing parton-like states, specifically at filling factor \nu=2/3 ν = 2 / 3 . The emergent Entangled Pauli Principle (EPP), introduced in [Phys. Rev. B 98, 161118(R) (2018)] and which defines the “DNA” of the quantum Hall fluid, is behind the exact determination of the topological characteristics of the fluid, including charge and braiding statistics of excitations, and effective edge theory descriptions. When the closed-shell condition is satisfied, the densest (i.e., the highest density and lowest total angular momentum) zero-energy mode is a unique parton state. We conjecture that parton-like states generally span the subspace of many-body wave functions with the two-body M M -clustering property within any given number of Landau levels, that is, wave functions with M M th-order coincidence plane zeroes and both holomorphic and anti-holomorphic dependence on variables. General arguments are supplemented by rigorous considerations for the M=3 M = 3 case of fermions in four Landau levels. For this case, we establish that the zero mode counting can be done by enumerating certain patterns consistent with an underlying EPP. We apply the coherent state approach of [Phys. Rev. X 1, 021015 (2011)] to show that the elementary (localized) bulk excitations are Fibonacci anyons. This demonstrates that the DNA associated with fractional quantum Hall states encodes all universal properties. Specifically, for parton-like states, we establish a link with tensor network structures of finite bond dimension that emerge via root level entanglement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Emergence of many-body quantum chaos via spontaneous breaking of unitarity

It is suggested that many-body quantum chaos appears as the spontaneous symmetry breaking of unitarity in interacting quantum many-body systems. It has been shown that many-body level statistics, probed by the spectral form factor (SFF) defined as K(η,t)=$\langle$|Tr exp(-ηH+itH)| 2 $\rangle$, is dominated by a diffuson-type mode in a field theory analysis. The key finding of this Letter is that the “unitary” η = 0 case is different from the η → 0 ± limit, with the latter leading to a finite mass of these modes due to interactions. This mass suppresses a rapid exponential ramp in the SFF, which is responsible for the fast emergence of Poisson statistics in the noninteracting case, and gives rise to a nontrivial random matrix structure of many-body levels. The interaction-induced mass in the SFF shares similarities with the dephasing rate in the theory of weak localization and the Lyapunov exponent of the out-of-time-ordered correlators.

36 MATERIALS SCIENCE↗

Robust qubit interactions mediated by photonic topological edge states

Here, we investigate the coupling of two spatially separated qubits via topologically protected edge states in a two-dimensional Hofstadter lattice. In this hybrid platform, the qubits are coupled to distinct edge sites of the lattice, enabling long-range interactions mediated by topological edge modes. We solve the full system Hamiltonian and analyze the resulting eigenstate structure to uncover the conditions under which coherent qubit interactions emerge. Our analysis reveals that the effective coupling is highly sensitive to the qubit placement, energy detuning, and the topological character of the edge spectrum. We obtain an analytical solution that goes beyond the perturbative regime, capturing the full interplay between the qubits and edge modes. These results provide a foundation for exploring information transport and many-body effects in engineered quantum systems where interactions are mediated by topological edge modes.

Chern insulators↗

Fuel property impacts on gaseous and PM emissions from a multi-mode single-cylinder engine

The U.S. Department of Energy’s Co-Optima initiative has focused on improving fuel economy and vehicle performance while reducing emissions through the simultaneous development of emerging sustainable fuels with beneficial properties and advanced combustion strategies. A major thrust has been the development of advanced compression ignition (ACI) combustion strategies of gasoline range fuels in combination with spark-ignited (SI) combustion in a single engine capable of multi-mode operation to achieve high power density with enhanced part load efficiency. The aim of this study was to further the understanding of how emissions from both ACI and SI strategies operating on the same fuels in the same engine are impacted by different fuel properties. This investigation focused on particulate matter (PM) and gaseous hydrocarbon emissions from 6 different fuels across 3 different combustion modes on the same single-cylinder engine designed for multi-mode operation: SI combustion, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). In each of these modes, 3 different CA50 phasings were studied such that all 6 fuels could be studied at the same phasings. Three of the six different fuels used were specially formulated in a previous investigation to study the impact of fuel distillation and aromatic content while maintaining the research octane number (RON) and octane sensitivity. Additionally, neat isooctane and two ethanol containing fuels (RD5-87 and Co-Optima E30) were studied. Different fuel and phasing impacts on emissions were observed across the three combustion modes. Fuel properties were found to impact soot PM and particle number more than the CA50 phasing, while the phasing had more impact on NOx emissions. The NOx emissions were reduced in the PFS mode for all fuels compared to SI combustion, but the SACI combustion mode did not reduce NOx emissions. Although PFS produced low soot PM emissions like SI, total PM mass emissions were significantly higher due to large organic carbon (OC) PM mass contribution. Both PFS and SACI had greater particle number emission than SI operation with small nuclei mode particles dominating in PFS compared to large agglomeration particles in SACI.

42 ENGINEERING↗

Automatic Differentiation of C++ Codes on Emerging Manycore Architectures with Sacado

Automatic differentiation (AD) is a well-known technique for evaluating analytic derivatives of calculations implemented on a computer, with numerous software tools available for incorporating AD technology into complex applications. However, a growing challenge for AD is the efficient differentiation of parallel computations implemented on emerging manycore computing architectures such as multicore CPUs, GPUs, and accelerators as these devices become more pervasive. In this work, we explore forward mode, operator overloading-based differentiation of C++ codes on these architectures using the widely available Sacado AD software package. In particular, we leverage Kokkos, a C++ tool providing APIs for implementing parallel computations that is portable to a wide variety of emerging architectures. Here we describe the challenges that arise when differentiating code for these architectures using Kokkos, and two approaches for overcoming them that ensure optimal memory access patterns as well as expose additional dimensions of fine-grained parallelism in the derivative calculation. We describe the results of several computational experiments that demonstrate the performance of the approach on a few contemporary CPU and GPU architectures. We then conclude with applications of these techniques to the simulation of discretized systems of partial differential equations.

97 MATHEMATICS AND COMPUTING↗

The use of teledentistry in facilitating oral health for older adults: A scoping review

Teledentistry is used in many countries to provide oral health care services. However, using teledentistry to provide oral health care services for older adults is not well documented. This knowledge gap needs to be addressed, especially when accessing a dental clinic is not possible and teledentistry might be the only way for many older adults to receive oral health care services. Nine databases were searched and 3,396 studies were screened using established eligibility criteria. Included studies were original research or review articles in which the intervention of interest was delivered to an older adult population (≥ 60 years) via teledentistry. The authors followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Review criteria. Nineteen studies were identified that met the criteria for inclusion. Only 1 study was from the United States. Seven studies had results focusing on older adult participants only, with most of those conducted in elder care facilities. The remainder consisted of studies with mixed-age populations reporting distinct results or information for older adults. The included studies used teledentistry, in both synchronous and asynchronous modes, to provide services such as diagnosis, oral hygiene promotion, assessment and referral of oral emergencies, and postintervention follow-up. Teledentistry comprises a variety of promising apps. Lastly, the authors identified and described uses, promising possibilities, and limitations of teledentistry to improve the oral health of older adults.

60 APPLIED LIFE SCIENCES↗

Labile Fe(III) supersaturation controls nucleation and properties of product phases from Fe(II)-catalyzed ferrihydrite transformation

We report Fe(II)-catalyzed ferrihydrite (Fh) transformation to more crystalline iron (oxyhydr)oxide phases is a widely occurring geochemical process which has been extensively studied as a function of Fe(II)/Fh ratios at fixed Fh loadings. However, recent isolation of an intermediate Fe(III) species resulting from Fe(II)-Fh contact that facilitates transformation by dissolution/reprecipitation suggests that the kinetics and properties of product phases will instead depend mostly on its rate of accumulation to a critical concentration, consistent with principles in the classical nucleation theory (CNT). This suggests a dependence both on the loading of Fe(II) on the surface, which controls the rate of labile Fe(III) formation, as well as the available volume of solution, which also impacts how fast it can achieve its critical concentration to nucleate product phases. To specifically examine the latter effect, here we studied transformation of 15 mg Fh in 1 mM FeSO 4 solutions at pH 7.2 in batch suspensions of 30 mL, 150 mL, and 450 mL volumes. Time-dependent concentrations of aqueous Fe(II), surface-associated Fe(II), and resulting labile Fe(III) were monitored along with bulk solids characterization as a function of time. Transmission electron microscopy (TEM) was used to visualize the evolution of phases at identical locations on TEM grids. The collective results show that the rates of Fh loss and emergence of product lepidocrocite (Lp) and goethite (Gt) as well as their phase proportions, nucleation mode and morphological properties depend directly on the rate of accumulation of the labile Fe(III) precursor to its critical concentration, which in our experiments was controlled simply by varying the available volume of solution into which it enters. Statistical analyses of TEM image data suggest that while both heterogeneous and homogeneous nucleation occurred in all experiments, the former was increasingly favored at lower Fh/solution ratio due to its lower nucleation barrier being more favorable at attendant lower supersaturations of Fe(III).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site Suitability and Air Pollution Impacts of Composting Infrastructure for California’s Organic Waste Diversion Law

The emerging field of polaritonic chemistry explores the behavior of molecules under strong coupling with cavity modes. Despite recent developments in ab initio polaritonic methods for simulating polaritonic chemistry under electronic strong coupling, their capabilities are limited, especially in cases where the molecule also features strong electronic correlation. To bridge this gap, we have developed a novel method for cavity QED calculations utilizing the Density Matrix Renormalization Group (DMRG) algorithm in conjunction with the Pauli–Fierz Hamiltonian. Our approach is applied to investigate the effect of the cavity on the S0–S1 transition of n-oligoacenes, with n ranging from 2 to 5, encompassing 22 fully correlated π orbitals in the largest pentacene molecule. Our findings indicate that the influence of the cavity intensifies with larger acenes. Additionally, we demonstrate that, unlike the full determinantal representation, DMRG efficiently optimizes and eliminates excess photonic degrees of freedom, resulting in an asymptotically constant computational cost as the photonic basis increases.

54 ENVIRONMENTAL SCIENCES↗

Probing chiral Kitaev spin liquids via dangling boundary fermions

Identifying experimental probes capable of diagnosing extreme quantum behavior is widely regarded as one of the foremost challenges in modern condensed matter physics. Here, we propose a novel approach for detecting chiral Kitaev spin-liquid states through measurements of the local dynamical spin structure factor on the boundary using scanning tunneling microscopy (STM). We specifically focus on unpaired (“dangling”) Majorana fermions, which naturally emerge along boundaries of Kitaev spin liquids, and can serve as indicators of chiral boundary modes under broad conditions, thereby offering a clear signature of these exotic quantum states.

Zhang, Shang-Shun [University of Tennessee, Knoxvi↗

Magnetically driven phonon instability enables the metal–insulator transition in h-FeS

Hexagonal iron sulfide exhibits a fascinating coexistence of metal–insulator, structural and magnetic transitions, reflecting an intimate interplay of its spin, phonon and charge degrees of freedom. Here, we show how a subtle competition of energetic and entropic free-energy components governs its thermodynamics and the sequence of phase transitions it undergoes upon cooling. By means of comprehensive neutron and X-ray scattering measurements, and supported by first-principles electronic structure simulations, we identify the critical role of the coupling between antiferromagnetic ordering and instabilities of anharmonic phonons in the metallic phase in driving the metal–insulator transition. The antiferromagnetic ordering enables the emergence of two zone-boundary soft phonons, whose coupling to a zone-centre mode drives the lattice distortion opening the electronic bandgap. Simultaneously, spin–lattice coupling opens a gap in the magnon spectrum that controls the entropy component of the metal–insulator transition free energy. Furthermore, these results reveal the importance of spin–phonon coupling to tune anharmonic effects, thus opening new avenues to design novel technologically important materials harbouring the metal–insulator transition and magnetoelectric behaviours.

36 MATERIALS SCIENCE↗

Mesoscopic two-point collective dynamics of glass-forming liquids

The collective density–density and hydrostatic pressure–pressure correlations of glass-forming liquids are spatiotemporally mapped out using molecular dynamics simulations. It is shown that the sharp rise of structural relaxation time below the Arrhenius temperature coincides with the emergence of slow, nonhydrodynamic collective dynamics on mesoscopic scales. The observed long-range, nonhydrodynamic mode is independent of wave numbers and closely coupled to the local structural dynamics. Below the Arrhenius temperature, it dominates the slow collective dynamics on length scales immediately beyond the first structural peak in contrast to the well-known behavior at high temperatures. Furthermore, these results highlight a key connection between the qualitative change in mesoscopic two-point collective dynamics and the dynamic crossover phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shear wave propagation in a liquid crystal: An inelastic X-ray scattering study

For this work, we investigated the spectrum of density fluctuations of a liquid crystal, CB7CB, in two different orientations by using high-resolution inelastic x-ray scattering. Our analysis, based on Bayesian principles, revealed that high-frequency collective excitations propagate through this mesoscale-ordered sample in a peculiar manner that lies somewhere between those observed in liquids and crystalline systems. Interestingly, when we probed longer length scales, a more pronounced solid-like response emerged. This was mainly characterized by anomalously sharp inelastic excitations and the onset of shear mode propagation. Comparison with previous x-ray diffraction results suggests a correlation between the observed behavior and the mesogen arrangement.

36 MATERIALS SCIENCE↗

Chiral Instabilities and the Onset of Chiral Turbulence in QED Plasmas

We present a first principles study of chiral plasma instabilities and the onset of chiral turbulence in QED plasmas with strong gauge matter interaction ( e 2 N f = 64 ), far from equilibrium. By performing classical-statistical lattice simulations of the microscopic theory, we show that the generation of strong helical magnetic fields from a helicity imbalance in the fermion sector proceeds via three distinct phases. During the initial linear instability regime the helicity imbalance of the fermion sector causes an exponential growth (damping) of magnetic field modes with right- (left-) handed polarization, for which we extract the characteristic growth (damping) rates. Secondary growth of unstable modes accelerates the helicity transfer from fermions to gauge fields and ultimately leads to the emergence of a self-similar scaling regime characteristic of a decaying turbulence, where magnetic helicity is efficiently transferred to macroscopic length scales. Within this turbulent regime, the evolution of magnetic helicity spectrum can be described by an infrared power spectrum with spectral exponent κ = 10.2 ± 0.5 and dynamical scaling exponents α = 1.14 ± 0.50 and β = 0.37 ± 0.13 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗