Search NASA⌕ Search

SEARCH · Search NASA

Results for “emerging technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Estimated performance and future potential of solar dynamic and photovoltaic power systems for selected LEO and HEO missions

Solar Photo Voltaic (PV) and thermal dynamic power systems for application to selected Low Earth Orbit (LEO) and High Eccentric Orbit (Energy) (HEO) missions are characterized in the regime 7 to 35 kWe. Input parameters to the characterization are varied corresponding to anticipated introduction of improved or new technologies. Comparative assessment is made between the two power system types utilizing newly emerging technologies in cells and arrays, energy storage, optical surfaces, heat engines, thermal energy storage, and thermal management. The assessment is made to common ground rules and assumptions. The four missions (space station, sun-synchronous, Van Allen belt and GEO) are representative of the anticipated range of multi-kWe earth orbit missions. System characterizations include all required subsystems, including power conditioning, cabling, structure, to deliver electrical power to the user. Performance is estimated on the basis of three different levels of component technology: (1) state-of-art, (2) near-term, and (3) advanced technologies. These range from planar array silicon/IPV nickel hydrogen batteries and Brayton systems at 1000 K to thin film GaAs with high energy density secondary batteries or regenerative fuel cells and 1300 K Stirling systems with ultra-lightweight concentrators and radiators. The system estimates include design margin for performance degradations from the known environmental mechanisms (micrometeoroids and space debris, atomic oxygen, electron and proton flux) which are modeled and applied depending on the mission. The results give expected performance, mass and drag of multi-kWe earth orbiting solar power systems and show how overall system figures of merit will improve as new component technologies are incorporated.

Bents, David J.↗
NASA NTRS1989

Estimated performance and future potential of solar dynamic and photovoltaic power systems for selected LEO and HEO missions

Solar photovoltaic and thermal dynamic power systems for application to selected low-earth-orbit (LEO) and high-earth-orbit (HEO) missions are characterized in the regime 7 to 35 kWe. Input parameters to the characterization are varied to correspond to anticipated introduction of improved or new technologies. A comparative assessment is made of the two power system types for emerging technologies in cells and arrays, energy storage, optical surfaces, heat engines, thermal energy storage and thermal management. The assessment is made to common ground rules and assumptions. The four missions (Space Station, sun-synchronous, Van Allen belt, and GEO) are representative of the anticipated range of multikilowatt earth-orbit missions. The results give the expected performance, mass and drag of multikilowatt earth-orbiting solar power systems and show how the overall system figure of merit will improve as new component technologies are incorporated.

Bents, David J.↗
NASA NTRS1993

Micro guidance and control technology overview

This paper gives an overview of micro-guidance and control technologies and in the process previews of the technology/user and systems issues presented in the guidance and control session at the workshop. We first present a discussion of the advantages of using micro-guidance and control components and then detail six micro-guidance and control thrusts that could have a revolutionary impact on space missions and systems. Specific technologies emerging in the micro-guidance and control field will be examined. These technologies fall into two broad categories: micro-attitude determination (inertial and celestial) and micro-actuation, control and sensing. Finally, the scope of the workshop's guidance and control panel are presented.

Kissel, Glen J.↗
NASA NTRS1993

Textile composite fuselage structures development

Phase 2 of the NASA ACT Contract (NAS1-18888), Advanced Composite Structural Concepts and Materials Technology for Transport Aircraft Structures, focuses on textile technology, with resin transfer molding or powder coated tows. The use of textiles has the potential for improving damage tolerance, reducing cost and saving weight. This program investigates resin transfer molding (RTM), as a maturing technology for high fiber volume primary structures and powder coated tows as an emerging technology with a high potential for significant cost savings and superior structural properties. Powder coated tow technology has promise for significantly improving the processibility of high temperature resins such as polyimides.

Jackson, Anthony C.↗
NASA NTRS2021

CubeSat Technology Past and Present: Current State-Of-The-Art Survey

A cube satellite (CubeSat) is an evolving and emerging technology that gives a novice or advanced researcher relatively affordable access to space research experiments and applications. The initial CubeSat standard was created in 1999 by California Polytechnic State University, San Luis Obispo and Stanford University’s Space Systems Development Lab to facilitate direct access to space for university students. This initial CubeSat standard has now been adopted by hundreds of organizations worldwide and includes not only universities, educational institutions, but private firms and government organizations. Dozens of CubeSats have been launched since 2003 and have come from more than 29 states in the United States. The CubeSat standard facilitates frequent and affordable access to space with launch opportunities available on most launch vehicles. CubeSats are a class of research spacecraft called nanosatellites and are built to standard CubeSat Units or U dimensions of 10 by 10 by 10 cm and are formally classified as 1U, 2U, 3U, or 6U in size. Most CubeSats are deployed from a Poly-Picosatellite Orbital Deployer called a P-POD. Partnerships among NASA, U.S. industry, and educational institutions are being formed to build upon existing successful CubeSat initiatives with a goal to expand and include launching 50 small satellites from 50 states within the next several years. An extensive and detailed literature review that includes over 830 citations has been conducted to provide a comprehensive resource on both NASA and non-NASA CubeSat experiments and applications that can serve as a guide for background information on CubeSats as well as a valuable resource of lessons learned from CubeSats that have been launched in the past. CubeSats are currently being launched from all over the world on different launch vehicle platforms. Some organizations providing launch opportunities are California Polytechnic State University (http://www.cubesat.org/contactus), ISISPACE Group (https://www.isispace.nl/), Nanoracks (http://nanoracks.com/), Spaceflight Industries, Inc. (http://spaceflight.com/), TriSept Corporation (https://trisept.com/), and Tyvak Nano-Satellite Systems, Inc. (https://www.tyvak.com/).

Cubesat↗
DOE OSTI2025

Hybrid renewable energy systems

In the pursuit of ecologically sustainable and resilient energy systems, increasingly more attention is being devoted to a diversity of energy generation and storage methods. As the landscape of generation technology gains nuance and complexity, a wide-ranging set of technical questions has emerged, touching on topics that range from control and optimization of hybrid systems to finance and economic viability to multi-fidelity modeling and scientific machine learning. In the context of this special issue, hybrid renewable energy systems are any systems that consider the combined dynamics of more than one form of generation, storage, or grid subsystem. Research endeavors have delved into improving the flexibility of energy systems by utilizing existing resources, introducing novel operational strategies, deploying enhanced renewable forecasts, and exploring emerging technologies. In conclusion, the interconnection among various sectors has garnered heightened attention, not only due to the provision of additional tradable energy products but also for furnishing flexible headroom to system operators.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Advanced Processing of Coal and Coal Waste to Produce Graphite for Fast-Charging Lithium-Ion Battery Anode

The University of North Dakota (UND) Energy & Environmental Research Center (EERC), in collaboration with the UND Center for Process Engineering Research (CPER), conducted a project to validate two technologies capable of converting North Dakota lignite and lignite coal waste to high-quality graphite for fast-charging lithium-ion battery (LIB) anode. The project was conducted over about 3 years from April 7, 2022, to July 6, 2025. The two technological paths pursued in this project include path A – direct conversion of coal or coal waste to graphite by the upgraded carbon ores to products (UCOP) process being developed at the EERC and path B – lignite-derived coal tar pitch (CTP) conversion to graphite (CTP2G) process being developed at CPER. The results from this project validate the two technological approaches and are expected to be an integral part of a portfolio of emerging technologies for making high-quality graphite not only from North Dakota lignite, but from all ranks of U.S. domestic coal and coal waste resources. The quality of the graphite produced by these technologies is high enough for various applications, including batteries for the fast-growing electric vehicle industry, energy storage applications, electric arc furnace electrodes for steel production, and graphene production, among others. Although the two technologies can produce high-quality graphite, they are fundamentally different in that the UCOP technology provides a direct path to transform coal to graphite, while the CTP2G technology needs to go through a CTP intermediate and a coking process for the intermediate, which requires a special facility to accomplish. For application in the industry, the UCOP process is designed to be more flexible, with feedstock to include potentially any carbonaceous material such as all coal ranks and biochar, while the CTP2G process is designed to utilize CTP as the starting precursor. The key project accomplishments include the following: • Successful preparation of high-quality synthetic graphite from North Dakota lignite coal/coal wastes and lignite-derived CTP. • Patent application has been filed for the UCOP process and an internal invention disclosure has been filed for the CTP2G process. • The produced graphite performs better than a commercial battery-grade sample in LIB coin cells, especially fast-charging capability, stability, and long-duration cycling. • Coin-type Li-ion half-cells with CTP2G graphite showed excellent performance, with >370 mAh/g capacity, >90% initial coulombic efficiency, and 93%/67% retention at 1C/2C rate, which outperforms commercial graphite in charging speed, stability, and cycling. • Results of fabricated 18650 cells were consistent with the observations in coin cells. • Preliminary techno-economic analysis (TEA) estimates for the UCOP technology indicate a manufacturing cost of about $\$$39/kg based on 50-metric ton/year capacity. • Preliminary TEA estimates for the CTP2G technology indicate a market price of about $\$$7107/ton ($\$$7/kg) based on 22,000-ton/year production capacity.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2002

Computing, Information and Communications Technology (CICT) Website

The Computing, Information and Communications Technology Program (CICT) was established in 2001 to ensure NASA's Continuing leadership in emerging technologies. It is a coordinated, Agency-wide effort to develop and deploy key enabling technologies for a broad range of mission-critical tasks. The NASA CICT program is designed to address Agency-specific computing, information, and communications technology requirements beyond the projected capabilities of commercially available solutions. The areas of technical focus have been chosen for their impact on NASA's missions, their national importance, and the technical challenge they provide to the Program. In order to meet its objectives, the CICT Program is organized into the following four technology focused projects: 1) Computing, Networking and Information Systems (CNIS); 2) Intelligent Systems (IS); 3) Space Communications (SC); 4) Information Technology Strategic Research (ITSR).

Hardman, John↗
DOE OSTI2008

Vehicle Technologies Program: Energy Storage R&D (2008 Annual Progress Report)

One of the primary objectives of the Energy Storage effort is the development of durable and affordable advanced batteries (and ultracapacitors) for use in a full range of vehicle applications, from start/stop to full-power HEVs, EVs, and PHEVs. The battery technology development activity spans three areas: system development of full battery systems; benchmark testing of emerging technologies in order to remain abreast of the latest industry developments; and Small Business Innovative Research (SBIR) to fund early-stage R&D for small businesses/entrepreneurs.

25 ENERGY STORAGE↗
NASA NTRS1974

Vehicle design considerations for active control application to subsonic transport aircraft

The state of the art in active control technology is summarized. How current design criteria and airworthiness regulations might restrict application of this emerging technology to subsonic CTOL transports of the 1980's are discussed. Facets of active control technology considered are: (1) augmentation of relaxed inherent stability; (2) center-of-gravity control; (3) ride quality control; (4) load control; (5) flutter control; (6) envelope limiting, and (7) pilot interface with the control system. A summary and appraisal of the current state of the art, design criteria, and recommended practices, as well as a projection of the risk in applying each of these facets of active control technology is given. A summary of pertinent literature and technical expansions is included.

Hofmann, L. G.↗
NASA NTRS1989

Evolutionary growth for Space Station Freedom electrical power system

Over an operational lifetime of at least 30 yr, Space Station Freedom will encounter increased space station user requirements and advancing technologies. The space station electrical power system is designed with the flexibility to accommodate these emerging technologies and expert systems and is being designed with the necessary software hooks and hardware scars to accommodate increased growth demand. The electrical power system is planned to grow from the initial 75 kW up to 300 kW. The Phase 1 station will utilize photovoltaic arrays to produce the electrical power; however, for growth to 300 kW, solar dynamic power modules will be utilized. Pairs of 25 kW solar dynamic power modules will be added to the station to reach the power growth level. The addition of solar dynamic power in the growth phase places constraints in the initial space station systems such as guidance navigation and control, external thermal, truss structural stiffness, computational capabilities and storage which must be planned-in in order to facilitate the addition of the solar dynamic modules.

Marshall, Matthew F.↗
NASA NTRS1989

Evolutionary growth for Space Station Freedom electrical power system

Over an operational lifetime of at least 30 yr, Space Station Freedom will encounter increased Space Station user requirements and advancing technologies. The Space Station electrical power system is designed with the flexibility to accommodate these emerging technologies and expert systems and is being designed with the necessary software hooks and hardware scars to accommodate increased growth demand. The electrical power system is planned to grow from the initial 75 kW up to 300 kW. The Phase 1 station will utilize photovoltaic arrays to produce the electrical power; however, for growth to 300 kW, solar dynamic power modules will be utilized. Pairs of 25 kW solar dynamic power modules will be added to the station to reach the power growth level. The addition of solar dynamic power in the growth phase places constraints in the initial Space Station systems such as guidance, navigation, and control, external thermal, truss structural stiffness, computational capabilities and storage, which must be planned-in, in order to facilitate the addition of the solar dynamic modules.

Marshall, Matthew Fisk↗
NASA NTRSDate not supplied

TPSAS-NF1676L-27111-DND

Rigid aeroshell systems are rapidly approaching the payload limit that current technology can deliver while fitting within the payload envelope of existing launch vehicles. The need for higher entry mass, landing elevation, and more controllability has pushed NASA to improve existing atmospheric entry technologies to further its scientific and exploration capabilities. Hypersonic Inflatable Aerodynamic Decelerators (HIADs) are an emerging technology that allows entry vehicles to deliver larger payloads to higher landing elevations by providing a larger aeroshell diameter than rigid aeroshells. HIADs offer new methods of entry vehicle trajectory control through shape morphing of the inflatable aeroshell. This dissertation explores different concepts of morphing a HIAD by assessing its structural integrity, aerodynamic performance, and systems integration. Analytical models are developed to predict the amount of force required to achieve a desired morphed shape, an actuator and sensor are selected based on performance requirements, and a controller is designed to morph the HIAD through Lift-to-Drag modulation. The actuator and sensor system and controller are then integrated into a small-scale development unit of a HIAD and experimental results are compared to numerical simulations. Conclusions and contributions of this research are presented along with a discussion on further research opportunities of Morphing HIADs.

Adam Milne Slagle↗
NASA NTRS2022

Event Report for The Ethical Artificial Intelligence Quantification Workshop

Artificial Intelligence (AI) is a powerful emerging technology area which requires special attention to using it ethically. AI ethics is still an emerging field, and the partners for this workshop and report seek to move AI ethics discussion ahead by experimenting with ways to measure AI ethics criteria. The following document describes the outcomes and learnings from The Ethical Artificial Intelligence Quantification Workshop held at the National Institute for Aerospace (NIA), Hampton, Virginia on May 12th, 2022. The purpose of the workshop was for participants to evaluate and experiment-with the methodology and process presented by AIEthics.World in cooperation with Intel Corporation. The meeting participants learned about the Ethical AI Certification and Maturity Model™ and applied the methodology to selected notional AI systems. The workshop facilitated the evaluation of the maturity of the AI system according to ethical considerations relevant to NASA, NIA and other participants. The workshop consisted of three main phases. The first phase focused on understanding and summarizing NASA’s ethical approaches, mission and values based on published documentation, discussions and individual insights & opinions of participants. This information was prioritized, weighted, ordered, and quantified in phase two, to formulate an alignment between human values (ethics) and their applicability to AI systems during all lifecycle phases. The first two phases were summarized as a form of ethical genealogy for artificial intelligence, specific to NASA’s ethical approaches. In the third and last phase of the workshop the participants evaluated notional examples of artificial intelligence to qualify and quantify its ability to adhere to the organizational ethics approaches, using the Ethical AI Certification and Maturity Model™. The workshop uses the concept of genealogy, in the traditional sense: the study and traceability of lines of ancestors in the process of evolutionary development from earlier forms. However, as it is applied to an Ethical AI definition, it is providing the insights to the necessary and mandatory traceability of content, data, metrics, telemetry, elements, and structures which are used in the AI’s lifecycle to foster and measure AI ethics in all steps of its lifecycle. The Ethical Artificial Intelligence Quantification Workshop provided NASA with the opportunity to apply the Ethical AI Certification and Maturity Model™, in combination with existing and well-known decision-making and quality control methods to identify the metrics and measurements for an Ethical AI and assess its ethical condition and quality aligned with NASA ethics approaches. The result of the workshop is the capacity for NASA to apply the maturity model assessment to its AI Systems as desired and if necessary, publish the ability of these AI Systems to adhere to the organizational ethical goals. AI ethics frameworks need to be customized for each application domain, for example, individual NASA Mission Directorates. General principles that work in one area such as AI/Machine Learning-based text analysis (the ethics of information-extraction) may need to be adapted for another such as sense-and-avoid decision-making in a flight environment. The workshop was conducted among approximately twenty NASA subject matter experts, so the elements noted above should be considered examples, not definitive NASA ethical AI principles, genealogy, etc. Generating a definitive AI ethics framework for an organization as diverse as NASA would require far more discussion, debate, review, etc. However, the workshop provided valuable insight into mechanisms and processes for quantifying AI ethical qualities.

Artificial Intelligence↗
NASA NTRS2018

The Disruptive Technology That is Additive Construction: System Development Lessons Learned for Terrestrial and Planetary Applications

Disruptive technologies are unique in that they spawn other new technologies and applications as they grow. These activities are usually preceded by the question, "What If?" For example, "What if we could use an emerging technology and in-situ materials to promote exploration on the Moon or Mars, and then use that same technology to keep our troops out of harm's way and/or help the worlds' homeless?" This question allows us to flip the mindset of "how can people create more valuable innovation?" to "how can innovation create more valuable people?." This approach allows us to view augmented human labor as an inclusive opportunity, not a threat. The discipline of Additive Construction is growing rapidly due to the flexibility, speed, safety and logistics benefits offered as compared to standard construction techniques. Additive construction is a disruptive technology in that it employs the principles of additive manufacturing on a human habitat structure scale. Developed initially for emergency management and disaster relief applications, additive construction has now grown into military infrastructure and planetary (Moon and Mars) surface infrastructure applications as well. Additive Construction with Mobile Emplacement (ACME) is a NASA technology development project that seeks to demonstrate the feasibility of constructing shelters for human crews, and other surface infrastructure, on the Moon or Mars for a future human presence. The ACME project will allow, for the first time, the 3-dimensional printing of surface structures on planetary bodies using local materials for construction, thereby tremendously reducing launch and transportation mass and logistics. Some examples of infrastructure that could be constructed using robotic additive construction methods are landing pads, rocket engine blast protection berms, roads, dust free zones, equipment shelters, habitats and radiation shelters. Terrestrial applications include the development of surface structures using Earth-based materials for emergency response, disaster relief, general construction, and housing at all economic levels. This paper will describe the progress made by the NASA ACME project with a focus on prototypes and full scale additive construction demonstrations using both Portland cement concrete and other indigenous material mixtures. Rationale for the use of additive construction for both terrestrial and planetary applications will be explored and a thorough state-of-the-art of additive construction techniques will be presented. An evolutionary history of NASA's additive construction development efforts, dating back to 2004, will be included. The paper will then step through a series of trade studies performed to inform key processing and design decisions in the development of the full-scale ACES-3 system developed by NASA and the Jacobs Space Exploration Group for the U.S. Army Corps of Engineers (USACE) Construction Engineers Research Laboratory (CERL) in Champaign, IL. The selection of aggregate and binders, based on in-situ materials, will also be presented and discussed

Space Processing↗
NASA NTRS1986

The NASA modern technology rotors program

Existing data bases regarding helicopters are based on work conducted on 'old-technology' rotor systems. The Modern Technology Rotors (MTR) Program is to provide extensive data bases on rotor systems using present and emerging technology. The MTR is concerned with modern, four-bladed, rotor systems presently being manufactured or under development. Aspects of MTR philosophy are considered along with instrumentation, the MTR test program, the BV 360 Rotor, and the UH-60 Black Hawk. The program phases include computer modelling, shake test, model-scale test, minimally instrumented flight test, extensively pressure-instrumented-blade flight test, and full-scale wind tunnel test.

Watts, M. E.↗
NASA NTRS1993

Massively parallel neurocomputing for aerospace applications

An innovative hybrid, analog-digital charge-domain technology, for the massively parallel VLSI implementation of certain large scale matrix-vector operations, has recently been introduced. It employs arrays of Charge Coupled/Charge Injection Device cells holding an analog matrix of charge, which process digital vectors in parallel by means of binary, non-destructive charge transfer operations. The impact of this technology on massively parallel processing is discussed. Fundamentally new classes of algorithms, specifically designed for this emerging technology, as applied to signal processing, are derived.

Fijany, Amir↗
NASA NTRS1996

NASA EEE Parts and Advanced Interconnect Program (AIP)

none given From Program Objectives: I. Accelerate the readiness of new technologies through development of validation, assessment and test method/tools II. Provide NASA Projects infusion paths for emerging technologies III. Provide NASA Projects technology selection, application and validation guidelines for harware and processes IV. Disseminate quality assurance, reliability, validation, tools and availability information to the NASA community.

NASA EEE Parts Program Advanced Interconnect Progr↗