Search NASA⌕ Search

SEARCH · Search NASA

Results for “emission lifetime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Iron dopant energy levels in β-Ga 2 O 3

The energetic positions of the two Fe dopant levels in the bandgap of β-Ga 2 O 3 are determined to be at 3.05(±0.05) and 3.85(±0.05) eV below the conduction band minimum from transmission measurements employing a sub-picosecond tunable ultraviolet laser radiation source. A further measurement of the quantum efficiency of photoelectron emission from the Fe:Ga 2 O 3 (010) photocathode is consistent with the obtained absorption data and a dominant optical phonon assisted Franck–Condon emission mechanism, while also providing an estimate of 100 ps for the conduction band electron lifetime.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Low‐Temperature Synthesis of Stable CaZn 2 P 2 Zintl Phosphide Thin Films as Candidate Top Absorbers

Abstract The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with bandgaps in the range of ≈1.5–2.3 eV, for use in the top cell paired with a narrower‐gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device layers. This study demonstrates the Zintl phosphide compound CaZn 2 P 2 as a compelling candidate semiconductor for these applications. Phase‐pure, ≈500 nm‐thick CaZn 2 P 2 thin films are prepared using a scalable reactive sputter deposition process at growth temperatures as low as 100 °C, which is desirable for device integration. Ultraviolet‐visible spectroscopy shows that CaZn 2 P 2 films exhibit an optical absorptivity of ≈10 4 cm −1 at ≈1.95 eV direct bandgap. Room‐temperature photoluminescence (PL) measurements show near‐band‐edge optical emission, and time‐resolved microwave conductivity (TRMC) measurements indicate a photoexcited carrier lifetime of ≈30 ns. CaZn 2 P 2 is highly stable in both ambient conditions and moisture, as evidenced by PL and TRMC measurements. Experimental data are supported by first‐principles calculations, which indicate the absence of low‐formation‐energy, deep intrinsic defects. Overall, this study shall motivate future work integrating this potential top cell absorber material into tandem solar cells.

14 SOLAR ENERGY↗
DOE OSTI2021

Multifunctional two-dimensional metal-organic frameworks for radionuclide sequestration and detection

Two lanthanide containing porous coordination polymers, [Ln2(bpdc)6(phen)2] · nH2O (1) and [Ln2(bpdc)6(terpy)2] · 3H2O (2) (Ln = either Pr, Nd or Sm-Dy); bpdc: 2,2'-bipyridine-5,5'-dicarboxylic acid, phen: 1,10-phenanthroline, and terpy: 2,2':6',2''-terpyridine, have been hydrothermally synthesized and structurally characterized by powder and single crystal X-ray diffraction. The crystallographic analyses reveal compounds 1 and 2 feature Ln3+ containing dimeric nodes that form a porous two-dimensional (2D) and non-porous three-dimensional (3D) framework, respectively. Each material is stable in aqueous media between pH 3-10 and exhibits modest thermal stability to ~400ºC. Notably, a portion of the phen and bpdc ligands in 1 can be removed thermally, without compromising the crystal structure, causing the surface area and pore volume to increase. The optical properties of 1 and 2 with Gd3+, Sm3+, Tb3+, and Eu3+ were explored in the solid-state using absorbance, fluorescence, and lifetime spectroscopies. The analyses reveal a complex blend of metal and ligand emission in the materials containing Sm3+ and Tb3+, while those featuring Eu3+ are dominated by intense metal-based emission. Compound 1 with Eu3+ displayed promise for the capture and detection of the uranyl cation, (UO2)2+, from aqueous media. In short, uranyl capture was observed at pH 4 and the adsorption thereof was detectable via vibrational and fluorescence spectroscopies and colorimetrically as the off-white color of 1 turned yellow with uptake. Finally, both 1 and 2 with Eu3+ produce bright red emission upon irradiation with Cu ka X-ray radiation (8.04 keV) and are candidate materials for applications in solid-state scintillation.

Surbella, Robert G.↗
DOE OSTI2020

Establishing charge-transfer excitons in 2D perovskite heterostructures

Charge-transfer excitons (CTEs) immensely enrich property-tuning capabilities of semiconducting materials. However, such concept has been remaining as unexplored topic within halide perovskite structures. Here, we report that CTEs can be effectively formed in heterostructured 2D perovskites prepared by mixing PEA 2 PbI 4 :PEA 2 SnI 4 , functioning as host and guest components. Remarkably, a broad emission can be demonstrated with quick formation of 3 ps but prolonged lifetime of ~0.5 μs. This broad PL presents the hypothesis of CTEs, verified by the exclusion of lattice distortion and doping effects through demonstrating double-layered PEA 2 PbI 4 /PEA 2 SnI 4 heterostructure when shearing-away PEA 2 SnI 4 film onto the surface of PEA 2 PbI 4 film by using hand-finger pressing method. The below-bandgap photocurrent indicates that CTEs are vital states formed at PEA 2 PbI 4 :PEA 2 SnI 4 interfaces in 2D perovskite heterostructures. Electroluminescence shows that CTEs can be directly formed with electrically injected carriers in perovskite LEDs. Clearly, the CTEs presents a new mechanism to advance the multifunctionalities in 2D perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly efficient photoelectric effect in halide perovskites for regenerative electron sources

Electron sources are a critical component in a wide range of applications such as electron-beam accelerator facilities, photomultipliers, and image intensifiers for night vision. We report efficient, regenerative and low-cost electron sources based on solution-processed halide perovskites thin films when they are excited with light with energy equal to or above their bandgap. We measure a quantum efficiency up to 2.2% and a lifetime of more than 25 h. Importantly, even after degradation, the electron emission can be completely regenerated to its maximum efficiency by deposition of a monolayer of Cs. The electron emission from halide perovskites can be tuned over the visible and ultraviolet spectrum, and operates at vacuum levels with pressures at least two-orders higher than in state-of-the-art semiconductor electron sources.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Linear and nonlinear optical responses in the chiral multifold semimetal RhSi

Chiral topological semimetals are materials that break both inversion and mirror symmetries. They host interesting phenomena such as the quantized circular photogalvanic effect (CPGE) and the chiral magnetic effect. In this work, we report a comprehensive theoretical and experimental analysis of the linear and nonlinear optical responses of the chiral topological semimetal RhSi, which is known to host multifold fermions. We show that the characteristic features of the optical conductivity, which display two distinct quasi-linear regimes above and below 0.4 eV, can be linked to excitations of different kinds of multifold fermions. The characteristic features of the CPGE, which displays a sign change at 0.4 eV and a large non-quantized response peak of around 160 μA/V 2 at 0.7 eV, are explained by assuming that the chemical potential crosses a flat hole band at the Brillouin zone center. Our theory predicts that, in order to observe a quantized CPGE in RhSi, it is necessary to increase the chemical potential as well as the quasiparticle lifetime. More broadly, our methodology, especially the development of the broadband terahertz emission spectroscopy, could be widely applied to study photogalvanic effects in noncentrosymmetric materials and in topological insulators in a contact-less way and accelerate the technological development of efficient infrared detectors based on topological semimetals.

Materials Science↗
DOE OSTI2021

Clocking Auger electrons

Intense X-ray free-electron lasers (XFELs) can rapidly excite matter, leaving it in inherently unstable states that decay on femtosecond timescales. The relaxation occurs primarily via Auger emission, so excited-state observations are constrained by Auger decay. In situ measurement of this process is therefore crucial, yet it has thus far remained elusive in XFELs owing to inherent timing and phase jitter, which can be orders of magnitude larger than the timescale of Auger decay. Here we develop an approach termed ‘self-referenced attosecond streaking’ that provides subfemtosecond resolution in spite of jitter, enabling time-domain measurement of the delay between photoemission and Auger emission in atomic neon excited by intense, femtosecond pulses from an XFEL. FUrthermore, using a fully quantum-mechanical description that treats the ionization, core-hole formation and Auger emission as a single process, the observed delay yields an Auger decay lifetime of \(2.2_{ - 0.3}^{ + 0.2}\) fs for the KLL decay channel.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

A red-emitting carborhodamine for monitoring and measuring membrane potential

Biological membrane potentials, or voltages, are a central facet of cellular life. Optical methods to visualize cellular membrane voltages with fluorescent indicators are an attractive complement to traditional electrode-based approaches, since imaging methods can be high throughput, less invasive, and provide more spatial resolution than electrodes. Recently developed fluorescent indicators for voltage largely report changes in membrane voltage by monitoring voltage-dependent fluctuations in fluorescence intensity. However, it would be useful to be able to not only monitor changes but also measure values of membrane potentials. This study discloses a fluorescent indicator which can address both. We describe the synthesis of a sulfonated tetramethyl carborhodamine fluorophore. When this carborhodamine is conjugated with an electron-rich, methoxy (-OMe) containing phenylenevinylene molecular wire, the resulting molecule, CRhOMe, is a voltage-sensitive fluorophore with red/far-red fluorescence. Using CRhOMe, changes in cellular membrane potential can be read out using fluorescence intensity or lifetime. In fluorescence intensity mode, CRhOMe tracks fast-spiking neuronal action potentials (APs) with greater signal-to-noise than state-of-the-art BeRST 1 (another voltage-sensitive fluorophore). CRhOMe can also measure values of membrane potential. The fluorescence lifetime of CRhOMe follows a single exponential decay, substantially improving the quantification of membrane potential values using fluorescence lifetime imaging microscopy (FLIM). The combination of red-shifted excitation and emission, mono-exponential decay, and high voltage sensitivity enable fast FLIM recording of APs in cardiomyocytes. The ability to both monitor and measure membrane potentials with red light using CRhOMe makes it an important approach for studying biological voltages.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Reducing Spontaneous Orientational Polarization via Semiconductor Dilution Improves OLED Efficiency and Lifetime

Spontaneous orientational polarization (SOP) in the electron-transport layer (ETL) of organic light-emitting diodes (OLEDs) is increasingly recognized as a key factor influencing their performance. Here, we show that SOP is dramatically reduced in the common electron-transport material 2,2',2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) by coevaporating it together with medium-density polyethylene. Eliminating SOP from the ETL of blue fluorescent OLEDs in this manner reduces their operating voltage by 0.5 V, increases their external quantum efficiency (EQE) by 30%, and leads to a threefold increase in device lifetime. We show that the EQE and lifetime improvements both originate from reduced exciton-polaron annihilation in the emissive layer, and that this leads to a functional relationship between the two quantities that can be used to quantify the rate of annihilation-induced degradation in the device. Furthermore, these results highlight a substantial opportunity to improve OLED performance by controlling SOP through semiconductor dilution and suggest that this capability can be used to systematically isolate and understand exciton-polaron degradation in the pursuit of stable blue OLEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First Observation of the Four-Proton Unbound Nucleus 18 Mg

18 Mg was observed, for the first time, by the invariant-mass reconstruction of 14 O + 4p events. The ground-state decay energy and width are E T = 4.865(34) MeV and Γ = 115(100) keV, respectively. The observed momentum correlations between the five particles are consistent with two sequential steps of prompt 2p decay passing through the ground state of 16 Ne. The invariant-mass spectrum also provides evidence for an excited state at an excitation energy of 1.84(14) MeV, which is likely the first excited 2 + state. As this energy exceeds that for the 2 + state in 20 Mg, this observation provides an argument for the demise of the N = 8 shell closure in nuclei far from stability. Furthermore, in open systems this classical argument for shell strength is compromised by Thomas-Ehrman shifts.

6 ≤ A ≤ 19↗
DOE OSTI2023

Strong Evidence for N 9 and the Limits of Existence of Atomic Nuclei

The boundaries of the Chart of Nuclides contain exotic isotopes that possess extreme proton-to-neutron asymmetries. Here we report on strong evidence of 9 N, one of the most exotic proton-rich isotopes where more than one half of its constitute nucleons are unbound. With seven protons and two neutrons, this extremely proton-rich system would represent the first-known example of a ground-state five-proton emitter. Here, the invariant-mass spectrum of its decay products can be fit with two peaks whose energies are consistent with the theoretical predictions of an open-quantum-system approach, however we cannot rule out the possibility that only a single resonance-like peak is present in the spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

GEN3D Experimental and Numerical Development of GEN3 Durability Models

Understanding of the high temperature durability of particles and the materials that contain them is critical to next generation of concentrating solar power (CSP) technology. Here we studied the durability of particles and their containment materials under extreme UV cycling, thermal cycling, and in low-speed high temperature mechanical wear situations. The optical stability of seven candidate particles has been determined following exposure to the high temperature conditions present in a generation 3 particle-based CSP technology. Particle solar weighted absorptance and emittance measured periodically during 10,000 high solar irradiance exposure cycles and up to 400 hours of isothermal aging has been documented. The particle aging due to repeated exposure to concentrated solar flux represented the 30-year lifetime of a power plant. Models were fit to the absorptivity and emissivity data following the isothermal aging provides the projected optical degradation of the particles as a function of temperature. Mechanical wear was studied through the use of custom developed wear testing facilities for measuring high temperature impact wear, abrasion wear, and particle attrition. Additionally, a novel technique for measuring the high temperature mechanical properties of single particles was developed. Through these tests it was observed that high nickel alloys generally showed lower wear than comparable iron based steels, particularly at elevated temperatures of 800°C. Mechanical wear at these temperatures is a highly complex phenomenon combining both mechanical wear and oxidation. Additionally, the containment materials wear rates are influenced by the particles (both hardness and roundness), making the wear mechanisms complex. The initial wear test conducted in the abrasion test rig revealed a substantial amount of oxide materials in the particle bed after testing (in relative to later tests), and substantially more wear, likely indicating a need for concern in startup operation of particle facilities to not incur high wear from the presence of oxides. Particle attrition experiments have only been conducted for a single material but increase size distribution, reduction in circularity, and particle diameter is observed. Efforts to develop predictive models was limited due to a testing campaign that prioritized testing materials for particle pathway developers over building a comprehensive design of experiments. The results discussed in this report inform future CSP developers and researchers further de risking the technology and assisting in its future development. ParticleBased CSP development provides a path to dispatchable solar power generation with storage at a price competitive in the current energy market. Lowering the cost of CSP technology provides a carbon free power generation solution that can assist in the transition from fossil fuels to renewable sources of electricity.

14 SOLAR ENERGY↗
DOE OSTI2023

Building the next high voltage dc photogun polarized source for the ILC at JLab

During the ILC Global Design Effort (2007) two 200 kV high voltage photoguns based on an inverted insulator geometry were developed in 2010 and successfully tested at Jefferson Lab (JLab). One of the photoguns has been operated at 130 kV in the CEBAF accelerator for the JLab nuclear physics program. The inverted insulator replaces the electrode support structure, consequently significantly less metal prone to field emission is biased and surfaces contributing to the vacuum load are significantly reduced. Implementing a biased anode, and using a larger laser spot size has made this the state of the art polarized beam source with ~200 C charge lifetime from SSL GaAs photocathodes. However, operating at the design 200 kV voltage has been hindered by field emission at ~190 kV. To reliably operate without field emission requires lengthy conditioning applying 50-100 kV beyond the voltage needed for beam operations, without breakdown or damage to the insulator. Over the past decade, JLab has developed two photoguns with a larger version of the commercial inverted insulators used in the ILC design. One photogun operated at 300 kV for magnetized beam studies, and the concept has been implemented in the BNL polarized photogun. The second photogun has recently been installed in CEBAF to operate at 200 kV field emission free. Higher voltage photoguns help the ILC and CLIC achieve higher bunch charge (2013 TDR), and additionally provide margin for operating with shorter laser pulse length and/or smaller laser spot size (better emittance at higher peak current). Such photogun designs need to reach ~400 kV without breakdown or insulator damage to operate field emission free at > 300 kV. This also allows for direct injection into a SRF booster. JLab submitted a proposal to HEP for developing in partnership with industry an inverted geometry insulator to fit commercial 400 kV cables. This contribution describes JLab experience developing and testing high voltage photoguns, and what is needed to sufficiently condition for voltage levels higher than beam operational voltage.

Hernandez-Garcia, Carlos↗
DOE OSTI2024

SPBMI Microgrid

The SPBMI Microgrid Project aims to achieve four primary objectives that support. the tribe’s strategic goals, plans, and mission: 1) Ensure the availability of resilient energy for five essential tribal facilities as identified in the San Pasqual Hazard Mitigation Plan and described in the San Pasqual Energy & Resiliency Plan; 2) Provide solar generation sufficient to achieve net-zero energy consumption at the five essential facilities; 3) Reduce the tribe’s lifetime levelized costs of energy (LCOE); and 4) Support tribal energy objectives including reducing greenhouse gas emissions. Secondary objectives include supporting local workforce development and employment, in part by utilizing commercially available and warranted technologies that can be operated and maintained by tribal staff. Expected outcomes from the project include substantially eliminating long-duration disruptions to essential tribal services due to utility outages (which totaled 34 hours in 2017); reducing lifetime energy costs by approximately $1.75 million; and producing approximately 6.5 GWh of renewable electricity over the system’s lifetime.

14 SOLAR ENERGY↗
DOE OSTI2024

Numerical coupling of aerosol emissions, dry removal, and turbulent mixing in the E3SM Atmosphere Model version 1 (EAMv1) – Part 1: Dust budget analyses and the impacts of a revised coupling scheme

Abstract. An earlier study evaluating dust life cycle in the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1) has revealed that the simulated global mean dust lifetime is substantially shorter when higher vertical resolution is used, primarily due to significant strengthening of dust dry removal in source regions. This paper demonstrates that the sequential splitting of aerosol emissions, dry removal, and turbulent mixing in the model's time integration loop, especially the calculation of dry removal after surface emissions and before turbulent mixing, is the primary reason for the vertical resolution sensitivity reported in that earlier study. Based on this reasoning, we propose a revised numerical process coupling scheme that requires the least amount of code changes, in which the surface emissions are applied before turbulent mixing instead of before dry removal. The revised scheme allows newly emitted particles to be transported aloft by turbulence before being removed from the atmosphere, and hence better resembles the dust life cycle in the real world. Sensitivity experiments show that the revised process coupling substantially weakens dry removal and strengthens vertical mixing in dust source regions. It also strengthens the large-scale transport from source to non-source regions, strengthens dry removal outside the source regions, and strengthens wet removal and activation globally. In transient simulations of the years 2000–2009 conducted using 1∘ horizontal grid spacing, 72 vertical layers, and unchanged tuning parameters of emission strength, the revised process coupling leads to a 40 % increase in the global total dust burden and an increase of dust lifetime from 1.8 to 2.5 d in terms of 10-year averages. Weakened dry removal and increased mixing ratios are also seen for other aerosol species that have substantial surface emissions, although the changes in mixing ratio are considerably smaller for the submicron species than for dust and sea salt. Numerical experiments confirm that the revised coupling scheme significantly reduces the strong and non-physical sensitivities of model results to vertical resolution in the original EAMv1. This provides a motivation for adopting the revised scheme in EAM as well as for further improvements on the simple revision presented in this paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Distributive Nd-to-Yb Energy Transfer within Pure [YbNdYb] Heterometallic Molecules

Facile access to site-selective hetero-lanthanide molecules will open new avenues in the search of novel photophysical phenomena based on Ln-to-Ln' energy transfer (ET). This challenge demands strategies to segregate efficiently different Ln metal ions among different positions in a molecule. We report here the one-step synthesis and structure of a pure [YbNdYb] (1) coordination complex featuring short Yb···Nd distances, ideal to investigate a potential distributive (i.e., from one donor to two acceptors) intramolecular ET from one Nd 3+ ion to two Yb 3+ centers within a well-characterized molecule. The difference in ionic radius is the mechanism allowing to allocate selectively both types of metal ion within the molecular structure, exploited with the simultaneous use of two β-diketone-type ligands. To assist the photophysical investigation of this heterometallic species, the analogues [YbLaYb] (2) and [LuNdLu] (3) have also been prepared. Sensitization of Yb 3+ and Nd 3+ in the last two complexes, respectively, was observed, with remarkably long decay times, facilitating the determination of the Nd-to-Yb ET within the [YbNdYb] composite. This ET was demonstrated by comparing the emission of iso-absorbant solutions of 1, 2, and 3 and through lifetime determinations in solution and solid state. The comparatively high efficiency of this process corroborates the facilitating effect of having two acceptors for the nonradiative decay of Nd 3+ created within the [YbNdYb] molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantized electronic transitions in electrodeposited copper indium selenide nanocrystalline homojunctions

Pairing semiconductors with electrochemical processing offers an untapped opportunity to create novel nanostructures for practical devices. Here we report the results of one such pairing: the in-situ formation of highly-doped, interface-matched, sharp nanocrystalline homojunctions (NHJs) with single step electrodeposition of two copper-indium-selenide (CISe) compounds on flexible foil. It produces a homogenous film, comprising inherently ordered, 3-dimensional interconnected network of pn -CISe NHJs. These CISe NHJs exhibit surprising non-linear emissions, quantized transitions, large carrier mobility, low trap-state-density, long carrier lifetime and possible up-conversion. They facilitate efficient separation of minority carriers, reduce recombination and essentially function like quantum materials. This approach mitigates the material issues and complex fabrication of incumbent nanoscale heterojunctions; it also overcomes the flexibility and scale-up challenges of conventional planar pn junctions. The self-stabilized CISe NHJ film can be roll-to-roll processed in ambient atmosphere, thus providing a promising platform for a range of optoelectronic technologies. This concept exemplified by CISe compounds can be adapted to create nano-scale pn junctions with other inorganic semiconductors.

36 MATERIALS SCIENCE↗