Search NASA⌕ Search

SEARCH · Search NASA

Results for “equilibrium constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Magnetic Sorbent for the Removal of Selenium(IV) from Simulated Industrial Wastewaters: Determination of Column Kinetic Parameters

A novel meso- and microporous tire-derived-carbon support with magnetic iron oxide nanoparticle adsorbents that selectively adsorbs Se(IV) ions from simulated contaminated water has been developed. In this work, the physicochemical characteristics of the composite adsorbent are characterized with respect to porosity and surface area, chemical composition, and microstructure morphology. The kinetics of this composite adsorbent in a fixed-bed setting has been determined. Several column runs were conducted and analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES) to determine the concentration gradient vs time. These results were then fit to a pseudo-second order rate law to obtain equilibrium values. Combining calculated equilibrium values with effluent concentration data, enabled the application of the Adams–Bohart model to determine reaction constants and column coefficients. Column parameters obtained from different flow rates and fittings of the Adams–Bohart model were remarkably consistent. These findings enable the application of this sorbent to fixed-bed column systems and opens up further research into mixed pollutants tests with real wastewater and scaling of selenium pollutant removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Verification of stability and unraveling the electronic and physical properties of bulk and (001)-surfaces of newly synthesized Ti 2 ZnX (X = C, N) MAX phases

MAX phase family has been extended by the addition of late transition metals at the A-site with the expectation of diverse functional properties. Here, we present our systematic density functional investigation on the thermodynamic and phonon stabilities, elastic properties, including elastic constants, elastic moduli and elastic anisotropy of newly synthesized Ti 2 ZnX (X = C, N) phases in comparison with conventional Ti 2 AlX (X = C, N). Due to the smaller size of N as compared to C, the unit cell dimension is reduced when C atoms are replaced by N atoms at the X-site. Furthermore, the Ti 2 ZnC and Ti 2 ZnN are stable at the equilibrium volume of 110.84 Å 3 and 105.70 Å 3 . The thermodynamic, mechanical and dynamical stabilities are validated by estimating the formation energies, elastic constants and phonon dispersions, respectively. The elastic properties of Ti 2 ZnN are less anisotropic as compared to those of Ti 2 ZnC. To understand the thin-film characteristics in Ti 2 ZnX, the surface properties with (001)-terminated slabs are investigated. Both Ti 2 ZnX bulk and (001)-surfaces exhibit metal-like electronic structures. There is a strong covalent bonding between Ti-X and Ti-Zn atoms confirmed by the charge density map and Mulliken population analysis. Additional states are generated at the Fermi level (EF) due to the unusual d-p states hybridization between Ti and Zn atoms. The anisotropy in chemical bonding is confirmed by the cleavage energy difference between Ti-X and Ti-Zn. Here, Ti(X)-001 and Zn-001 terminations are stable surfaces; however, in terms of chemical potentials, Zn-001 termination is the most favourable in Ti 2 ZnX.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Drag exerted by drift-acoustic radiation on a magnetic island

The Island Equilibrium and Transport (IslET) model is extended to allow for the effects of ion compressibility albeit for a constant electron temperature. The model describes fully relaxed, saturated, steady-state magnetic islands arising from the evolution of a tearing mode caused either by an instability or an externally imposed resonant perturbation. It assumes that the collision frequency lies in the semi-collisional regime. A salient new feature of the extended model is an equation describing the transport of parallel momentum. The model is applied to evaluate the drag exerted on a thin island by the emission of drift-acoustic waves.

Physics↗
DOE OSTI2023

The onset distribution of rotating m , n = 2 , 1 tearing modes and its consequences on the stability of high-confinement-mode plasmas in DIII-D

Abstract Analysis of a multi-scenario database of over 13 000 DIII-D H-mode discharges shows that the m , n = 2 , 1 magnetic islands are dominantly pressure gradient driven, stochastically triggered non-linear instabilities at all edge safety factor ( q 95 ) values. The instability onset time closely follows the exponential distribution in intermediate and high q 95 scenarios and is characterized by near constant onset rate ( λ ), in accordance with Poisson-point processes. This implies that the plasmas are operated in marginally stable conditions, characterized by a small threshold for instability growth and variations in the trigger amplitude and/or the stabilizing mechanisms with temporally uniform random distribution in this database. While the majority of the tearing modes occur in the first current-profile relaxation time of the β N flattop, constant λ throughout the β N flattop shows that the tearing onset is insensitive to the evolution of the equilibrium current profile. In low q 95 scenarios, where a large fraction of the plasmas are operated at low torque, λ increases over the course of the β N flattop, showing that these plasmas evolve toward more unstable conditions. The onset rate rapidly increases with β N , while it does not show a clear dependence on the current gradient at the mode rational surface. Overall, these observations support that the majority of the analyzed 2,1 tearing modes are non-linear, neoclassically driven instabilities and classical stability does not play a dominant role in their onset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

First-Principles-Based Machine Learning Models for Phase Behavior and Transport Properties of CO 2

In this work, we construct distinct first-principles-based machine-learning models of CO 2 , reproducing the potential energy surface of the PBE-D3, BLYP-D3, SCAN and SCAN-rvv10 approximations of density functional theory. Here we employ the Deep Potential methodology to develop the models and consequently achieve a significant computational efficiency over ab initio molecular dynamics (AIMD) that allows for larger system sizes and time scales to be explored. Although our models are trained only with liquid phase configurations, they are able to simulate a stable interfacial system and predict vapor-liquid equilibrium properties, in good agreement with results from the literature. Because of the computational efficiency of the models, we are also able to obtain transport properties, such as viscosity and diffusion coefficients. We find that the SCAN-based model presents a temperature shift in the position of the critical point, while the SCAN-rvv10-based model shows improvement but still exhibits a temperature shift that remains approximately constant for all properties investigated in this work. We find that the BLYP-D3-based model generally performs better for liquid phase and vapor-liquid equilibrium properties, but the PBE-D3-based model is better suited for predicting transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

CFD unified approach under Eulerian–Lagrangian framework for methanol and gasoline direct injection sprays in evaporative and flash boiling conditions

Innovative synthetic fuels for advanced propulsion systems, such as methanol and ammonia, and synthetic blended fuels (E00, E10, and E30), known for their high volatility, are often injected directly into combustion chambers. It follows that Eulerian–Lagrangian spray models need to accurately capture the spray collapse as a consequence of flash boiling onset and be capable of proficiently handling the preferential evaporation of multi-component fuels in evaporative scenarios. So, we performed the assessment of an Eulerian–Lagrangian CFD code for simulating methanol and E00 gasoline blend sprays in both early and late injection conditions involving flash boiling conditions and preferential evaporation. The adoption of an effervescent breakup model and of a non-equilibrium phase transition model for the discrete phase allows the adoption of a setup that is almost completely free from specific constant tuning, especially for what concerns the breakup model. We validated the simulations using experimental PLV maps of methanol and E00 sprays issued from the ECN Spray M injector. The results highlight a significantly different morphology of the methanol spray compared to the E00 one under late injection conditions. Under stratified combustion, low-volatile fuels are likely to be ignited first, and the flame propagates toward the high-volatile fuels. In conclusion, the spray collapse was also correctly reproduced, inducing the presence of a low-pressure zone and modifying the spray morphology.

E00↗
DOE OSTI2022

The impact of swirl and wake strength on turbulent axisymmetric wake evolution

Here, an experimental investigation of swirl and wake strength influence on axisymmetric turbulent wake evolution was conducted. A novel wake generator design wire mounted in a wind tunnel test section with low free-stream turbulence produced wake Reynolds numbers based on momentum thickness and free-stream velocity in excess of 14000 and swirl numbers up to 0.4 with minimal blockage. Steady-state blade element momentum simulations of reference wind turbine designs indicated that wind turbines operate in the flow regimes studied, indicating the practical aspects of this work. Stereoscopic particle image velocimetry was used to acquire three components of velocity in the swirling wake at locations up to approximately ten diameters downstream. Quantitative measures of wake growth and decay were deduced using available equilibrium similarity scaling for the swirling wake. The results show an increase above 50% in growth and axial velocity decay rate constants over the range of swirl strength studied compared to those of the non-swirling wake. Tangential velocity decay constants were shown to decrease with swirl strength over the range of conditions studied. Notably, changes in wake strength have little influence on growth and decay rates when compared to changes in swirl strength for the flow regimes studied in this work.

17 WIND ENERGY↗
DOE OSTI2020

Dynamics near equilibrium for intense beams in a nonlinear integrable focusing channel

Accelerator storage ring designs based on nonlinear integrable Hamiltonian systems provide a novel test-bed for studying the interplay between nonlinear dynamics and space charge at high intensity. In this work, the structure of beam Vlasov equilibria is explored for a constant focusing channel based on the nonlinear focusing potential of the Integrable Optics Test Accelerator. Finally, the dynamics of the single-particle orbits is explored in the combined space charge and external focusing fields as a function of beam current, and the self-consistent relaxation of a mismatched beam to equilibrium is characterized.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Massive white dwarfs in $f(\mathtt {R,L_m})$ gravity

In this work, we investigate the equilibrium configurations of massive white dwarfs (MWD) in the context of modified gravity, namely f(R,L m ) gravity, where R stands for the Ricci scalar and L m is the Lagrangian matter density. We focused on the specific case f(R,L m ) = R/2 + L m + σRL m , i.e., we have considered a non-minimal coupling between the gravity field and the matter field, with σ being the coupling constant. For the first time, the theory is applied to white dwarfs, in particular to study massive white dwarfs, which is a topic of great interest in the last years. The equilibrium configurations predict maximum masses which are above the Chandrasekhar mass limit. The most important effect of the theory is to increase significantly the mass for stars with radius < 2000 km. We found that the theory can accommodate the super-Chandrasekhar white dwarfs for different star compositions. Apart from this, the theory recovers the General Relativity results for stars with radii larger than 3000 km, independent of the value of σ.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Investigation of post-injection strategies for diesel engine Catalyst Heating Operation using a vapor-liquid-equilibrium-based spray model

Most multidimensional engine simulations spend much time solving for non-equilibrium spray dynamics (atomization, collision, vaporization). However, their accuracy is limited by significant grid dependency, and the need for extensive calibration. This is critical for modeling cold-start diesel fuel post injections, which occur at low temperatures and pressures, far from typical model validation ranges. At the same time, resolving micron-scale spray phenomena would render full Eulerian multiphase calculations prohibitive. In this study, an improved phase equilibrium based approach was implemented and assessed for simulating diesel catalyst heating operation strategies. A phase equilibrium solver based on the model by Yue and Reitz [1] was implemented: a fully multiphase CFD solver is employed with an engineering-size engine grid, and fuel injection is modeled using the standard Lagrangian parcels approach. Mass and energy from the liquid parcels are released to the Eulerian multiphase mixture according to an equilibrium-based liquid jet model. An improved phase equilibrium solver was developed to handle large real-gas mixtures such as those from accurate chemical kinetics mechanisms. The liquid-jet model was improved such that momentum transfer to the Eulerian solver better reproduces the physical spray jet structure. Validation of liquid/vapor penetration predictions showed that the model yields accurate results with very limited tuning and low sensitivity to the few calibration constants. In-cylinder simulations of diesel catalyst heating operation strategies showed that capturing spray structure is paramount when short, transient injection pulses and low temperatures are present. Furthermore, the EP model provides improved predictions of post-injection spray structure and ignitability, while conventional spray modeling does not capture the increase of liquid penetration during the expansion stroke. Finally, the only important EP model calibration constant, Cliq, does not affect momentum transfer, but it changes the local charge cooling distribution through the local energy transfer, which makes it candidate to additional research. The results confirm that non-equilibrium spray processes do not need to be resolved in engineering simulations of high-pressure diesel sprays.

42 ENGINEERING↗
DOE OSTI2021

Redox-Induced Structural Reorganization Dictates Kinetics of Cobalt(III) Hydride Formation via Proton-Coupled Electron Transfer

Two-electron, one-proton reactions of a family of [CoCp(dxpe)(NCCH 3 )] 2+ complexes (Cp = cyclopentadienyl, dxpe = 1,2-bis(di(aryl/alkyl)phosphino)ethane) form the corresponding hydride species [HCoCp(dxpe)] + through a stepwise proton-coupled electron transfer process. For three [CoCp(dxpe)(NCCH 3 )] 2+ complexes (dxpe = dppe (1,2-bis(diphenylphosphino)ethane), depe (1,2-bis(diethylphosphino)ethane), and dcpe (1,2-bis(dicyclohexylphosphino)ethane)), peak shift analysis was employed to quantify apparent proton transfer rate constants from cyclic voltammograms recorded with acids ranging 22 pK a units. The apparent proton transfer rate constants correlate with the strength of the proton source for weak acids, but these apparent proton transfer rate constants curiously plateau (k pl ) as the reaction becomes increasingly exergonic. The absolute apparent proton transfer rate constants across both these regions correlate with the steric bulk of the chelating diphosphine ligand, with bulkier ligands leading to slower kinetics (k plateau,depe = 3.5 x 10 7 M -1 s -1 , k plateau,dppe = 1.7 x 10 7 M -1 s -1 , k plateau,dcpe = 7.1 x 10 4 M -1 s -1 ). Mechanistic studies were conducted to identify the cause of the aberrant $k_PT^{app}$–ΔpK a trends. When the deuterated acids are employed, deuterium incorporation in the Cp ring is observed, indicating protonation of the CoCp(dxpe) species to form the corresponding hydride proceeds via initial ligand protonation. Digital simulations of cyclic voltammograms show ligand loss accompanying initial reduction gates subsequent PCET activity at higher driving forces. Together, these experiments reveal the details of the reaction mechanism: reduction of the Co(III) species is followed by dissociation of the bound acetonitrile ligand, subsequent reduction of the unligated Co(II) species to form a Co(I) species is followed by protonation, which occurs at the Cp ring, followed by tautomerization to generate the stable Co(III)-hydride product [HCoCp(dxpe)] + . Analysis as a function of chelating disphosphine ligand, solvent, and acid strength reveals that the ligand dissociation equilibrium is directly influenced by the steric bulk of the phosphine ligands and gates protonation, giving rise to the plateau of apparent proton transfer rate constant with strong acids. The complexity of the reaction mechanism underpinning hydride formation, encompassing dynamic behavior of the entire ligand set, highlights the critical need to understand elementary reaction steps in proton-coupled electron transfer reactions.

14 SOLAR ENERGY↗
DOE OSTI2020

On the inference of viscoelastic constants from stress relaxation experiments

Several constitutive theories have been proposed in the literature to model the viscoelastic response of materials, including widely used rheological constitutive models. These models are characterized by certain parameters ("time constants") that define the time scales over which the material relaxes. These parameters are primarily obtained from stress relaxation experiments using curve-fitting techniques. However, the question of how best to estimate these time constants remains open. As a step towards answering this question, we propose an optimal experimental design approach based on ideas from information geometry, namely Fisher information and Kullback-Leibler divergence. The material is modeled as a spring element in parallel with multiple Maxwell elements and described using a one- or two-term Prony series. Treating the time constants as unknowns, we develop expressions for the Fisher information and Kullback-Leibler divergence that allow us to maximize information gain from experimental data. Based on the results of this study, we propose that the largest time constant estimated from a stress relaxation experiment for a linear viscoelastic material should be at most one-fifth of the total time of the experiment in order to maximize information gain. Our results also provide confirmation that the equilibrium modulus of the material cannot be reliably determined from curve-fitting to data from a stress relaxation experiment.

Fisher information↗
DOE OSTI2022

Reversible Interfacial Charge Transfer and Delayed Emission in InP/ZnSe/ZnS Quantum Dots with Hexadecanethiol

The results in this paper show that holes are rapidly and reversibly transferred from red-emitting InP/ZnSe/ZnS quantum dots (QDs) to adsorbed hexadecanethiol (HDT) forming an equilibrium between the thiols and the QD valence band. Photoexcitation results in populations of holes in the valence band and in slightly higher-energy shell-localized traps. Trap to valence band hole tunneling results in a photoluminescence risetime having time constants varying from 300 ps to 2 ns. The presence of adsorbed HDT eliminates the slower risetime component, indicating that hole transfer from the shell-localized traps that are closest to the particle surface efficiently competes with tunneling to the QD core. This shows that the interfacial charge transfer equilibrium is established in less than 2 ns. The population of the shell-localized traps corresponds to a reservoir of hole states that eventually tunnel to the core-localized valence band, resulting in delayed emission. The amount of delayed emission increases rapidly with ZnSe shell thickness and is slightly blue-shifted from the prompt photoluminescence. We propose an energetic model in which the HDT/valence band equilibrium is affected by the extent of valence band quantum confinement and an electric field produced by core–shell interfacial dipoles. Furthermore, this model explains the core size, shell thickness, and photoluminescence (PL) wavelength dependence of this equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Geometry optimizations with spinor-based relativistic coupled-cluster theory

Development of analytic gradients for relativistic coupled-cluster singles and doubles augmented with a non-iterative triples [CCSD(T)] method using an all-electron exact two-component Hamiltonian with atomic mean-field spin–orbit integrals (X2CAMF) is reported. This enables efficient CC geometry optimizations with spin–orbit coupling included in orbitals. Here, the applicability of the implementation is demonstrated using benchmark X2CAMF-CCSD(T) calculations of equilibrium structures and harmonic vibrational frequencies for methyl halides, CH 3 X (X = Br, I, and At), as well as calculations of rotational constants and infrared spectrum for RaSH+, a radioactive molecular ion of interest to spectroscopic study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Observation of laser ablation of silicon as a function of pulse length at constant fluence via time-resolved x-ray spectroscopy

We investigate the ablation of silicon as a function of laser pulse length at a constant fluence using time-resolved x-ray spectroscopy data obtained from OMEGA EP experiments at the University of Rochester's Laboratory for Laser Energetics. Our targets consisted of three-layer planar structures composed of Si (50 μm), Cu (25 μm), and SiO 2 (500 μm) layers. The Si layer was irradiated by a 351-nm laser with varying pulse widths of 250 ps, 500 ps, 1 ns, and 10 ns while maintaining a constant fluence of ~27.9 kJ/cm 2 . Electron temperatures and densities of the ablated plasma were determined by analyzing the time-resolved x-ray spectroscopy data through a comparison of experimental measurements with synthetic results obtained from Si atomic calculations in a steady state and non-local thermodynamic equilibrium. These calculations were computed using PrismSPECT. Additionally, radiation-hydrodynamics simulations with FLASH are used to generate simulated plasma-density and plasma-temperature profiles, which are then compared with the experimental measurements. Our analyses reveal that increasing the laser pulse length at a constant fluence results in a decrease in electron temperatures and densities. Furthermore, the longer pulses with lower intensities lead to deeper ablation regions before reaching the peak ablation but lower ionization balances in the silicon layer. Furthermore, these findings emphasize the critical role of laser pulse length in plasma ablation and shock generation for laser-impulse studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Coordinate transformation and construction of finite element mesh in a diverted tokamak geometry

A coordinate transformation technique between straight magnetic field line coordinate system (Ψ, θ) and Cartesian coordinate system (R, Z) is presented employing a Solov'ev solution of the Grad-Shafranov equation. Employing the equilibrium solution, the poloidal magnetic flux Ψ(R, Z) of a diverted tokamak, magnetic field line equation is solved computationally to find curves of constant poloidal angle θ, which provides us with explicit relations R = R(Ψ, θ) and Z = Z(Ψ, θ). Correspondingly, conversion from one coordinate to the other along particle trajectories in the vicinity of separatrix is demonstrated. Based on the magnetic structure, a finite element mesh is generated in a diverted tokamak geometry to solve Poisson's equation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Open Circuit Potential of a Au Catalyst during Selective Oxidation of Glycerol

It has been of great interest to understand relationships between the potential of a metal catalyst and its thermochemical catalytic activity, especially in an aqueous phase environment. In the literature, there are correlations of open circuit potential with reaction rates or surface concentrations of reaction intermediates. In this study, we measured the open circuit potential (OCP) of a Au gauze during selective oxidation of glycerol to glyceric acid and hydrogen peroxide in a basic solution, as a function of hydroxide and alcoholate concentrations. It is found that applying a potential to the Au catalyst has no influence on the reaction rate. Although a rough correlation appears to exist between OCP and reaction rate, the data are better fit to an equation which assumes that the potential of the metal (i.e. the OCP) is in equilibrium with the electrochemical potential of the solution, which is defined by the thermodynamic activities of the oxidizing and reducing species. The equation: OCP = constant + Σ ox [(RT/FZ ox )ln[Ox]] - Σ red [(RT/FZ red )ln[Red]] implicitly assumes that the Au metal functions as a probing electrode. It is further found that this equation also applies to the Au-catalyzed H 2 O 2 oxidation/decomposition reaction in a basic medium, and possibly to formic acid dehydrogenation. Here, we postulate that the apparent correlation between OCP and reaction rate is due to the fact that the reaction rate is proportional to the concentrations of the reaction products and/or reactants that define the electrochemical potential of the solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heterosynaptic plasticity in biomembrane memristors controlled by pH

Abstract In biology, heterosynaptic plasticity maintains homeostasis in synaptic inputs during associative learning and memory, and initiates long-term changes in synaptic strengths that nonspecifically modulate different synapse types. In bioinspired neuromorphic circuits, heterosynaptic plasticity may be used to extend the functionality of two-terminal, biomimetic memristors. In this article, we explore how changes in the pH of droplet interface bilayer aqueous solutions modulate the memristive responses of a lipid bilayer membrane in the pH range 4.97–7.40. Surprisingly, we did not find conclusive evidence for pH-dependent shifts in the voltage thresholds ( V* ) needed for alamethicin ion channel formation in the membrane. However, we did observe a clear modulation in the dynamics of pore formation with pH in time-dependent, pulsed voltage experiments. Moreover, at the same voltage, lowering the pH resulted in higher steady-state currents because of increased numbers of conductive peptide ion channels in the membrane. This was due to increased partitioning of alamethicin monomers into the membrane at pH 4.97, which is below the pKa (~5.3–5.7) of carboxylate groups on the glutamate residues of the peptide, making the monomers more hydrophobic. Neutralization of the negative charges on these residues, under acidic conditions, increased the concentration of peptide monomers in the membrane, shifting the equilibrium concentrations of peptide aggregate assemblies in the membrane to favor greater numbers of larger, increasingly more conductive pores. It also increased the relaxation time constants for pore formation and decay, and enhanced short-term facilitation and depression of the switching characteristics of the device. Modulating these thresholds globally and independently of alamethicin concentration and applied voltage will enable the assembly of neuromorphic computational circuitry with enhanced functionality. Impact statement We describe how to use pH as a modulatory “interneuron” that changes the voltage-dependent memristance of alamethicin ion channels in lipid bilayers by changing the structure and dynamical properties of the bilayer. Having the ability to independently control the threshold levels for pore conduction from voltage or ion channel concentration enables additional levels of programmability in a neuromorphic system. In this article, we note that barriers to conduction from membrane-bound ion channels can be lowered by reducing solution pH, resulting in higher currents, and enhanced short-term learning behavior in the form of paired-pulse facilitation. Tuning threshold values with environmental variables, such as pH, provide additional training and learning algorithms that can be used to elicit complex functionality within spiking neural networks. Graphical abstract

36 MATERIALS SCIENCE↗