Search NASA⌕ Search

SEARCH · Search NASA

Results for “estimation theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Speed estimation from a single image of a disc: theory

We develop an approach to estimate the tangential speed of the edge of a rotating disc using a single image captured from a moving camera. The only dimensional information required for the estimate is the velocity of the camera relative to the ground. Notably, the size of the disc is not used, and the scene requires no calibration. The side of a tire and wheel assembly (TWA) on a motor vehicle can be a good approximation to a rotating disc, and, under reasonable assumptions, the tangential speed of the tire tread equals the speed of the vehicle. This indirect measurement of vehicle speed is passive, works independently of camera orientation, and is unaffected by obstructions between the vehicle and camera as long as one TWA is visible. The technique is readily adapted for application to a disc attached to a stationary mount.

airborne camera↗
NASA NTRS1980

Identification of flexible aircraft from flight data

This paper describes a frequency-domain method for the estimation of the aeroelastic equations of motion of an aircraft using discrete sinusoidal inputs to the control surface actuators. The theory of estimation of the signal inputs and outputs is described as well as the method of obtaining accurate transfer functions from the resulting Bode plots. Methods of quantifying the accuracy of the results from more than one control input are discussed along with ways to obtain state-space and reduced-order models from the transfer function estimates. Presented is a summary of the results obtained in using the technique to develop a model of the USAF Total In-Flight Simulator (TIFS) aircraft which includes five symmetrical elastic modes of motion of the aircraft.

Eulrich, B. J.↗
NASA NTRS1988

Improvements to photometry. Part 1: Better estimation of derivatives in extinction and transformation equations

Atmospheric extinction in wideband photometry is examined both analytically and through numerical simulations. If the derivatives that appear in the Stromgren-King theory are estimated carefully, it appears that wideband measurements can be transformed to outside the atmosphere with errors no greater than a millimagnitude. A numerical analysis approach is used to estimate derivatives of both the stellar and atmospheric extinction spectra, avoiding previous assumptions that the extinction follows a power law. However, it is essential to satify the requirements of the sampling theorem to keep aliasing errors small. Typically, this means that band separations cannot exceed half of the full width at half-peak response. Further work is needed to examine higher order effects, which may well be significant.

Young, Andrew T.↗
DOE OSTI2025

Controlled gate networks: theory and application to eigenvalue estimation

We introduce a new scheme for quantum circuit design called controlled gate networks. Rather than trying to reduce the complexity of individual unitary operations, the new strategy is to toggle between all of the unitary operations needed with the fewest number of gates. We present the general theory of controlled gate networks and show that, under quite general conditions, it can significantly reduce the number of two-qubit gates needed to produce linear combinations of unitary operators. The first example we consider is a variational subspace calculation for a two-qubit system. The second example is estimating the eigenvalues of a two-qubit Hamiltonian via the rodeo algorithm (Choi et al. in Phys Rev Lett 127(4):040505, 2021. https://doi.org/10.1103/PhysRevLett.127.040505) using operators that we call controlled reversal gates. We use the Quantinuum H1-2 and IBM Perth devices to realize the quantum circuits. The third example is the application of controlled gate networks to the controlled time evolution of a free nucleon on a three-dimensional lattice. For all of the examples, we show very substantial reductions in the number of two-qubit gates required. Our work demonstrates that controlled gate networks are a useful tool for reducing gate complexity in quantum algorithms for quantum many-body problems such as those relevant to nuclear physics.

Bee-Lindgren, Max [Georgia Institute of Technology↗
NASA NTRS1986

A methodology for designing robust multivariable nonlinear control systems

A new methodology is described for the design of nonlinear dynamic controllers for nonlinear multivariable systems providing guarantees of closed-loop stability, performance, and robustness. The methodology is an extension of the Linear-Quadratic-Gaussian with Loop-Transfer-Recovery (LQG/LTR) methodology for linear systems, thus hinging upon the idea of constructing an approximate inverse operator for the plant. A major feature of the methodology is a unification of both the state-space and input-output formulations. In addition, new results on stability theory, nonlinear state estimation, and optimal nonlinear regulator theory are presented, including the guaranteed global properties of the extended Kalman filter and optimal nonlinear regulators.

Grunberg, D. B.↗
NASA NTRS1994

The physics of grain-grain collisions and gas-grain sputtering in interstellar shocks

Grain-grain collisions and ion sputtering destroy dust grains in interstellar shocks. An analytical theory is developed for the propagation of shock waves in solids driven by grain-grain collisions, which compares very favorably with detailed numerical calculations. This theory is used to determine the fraction of grain vaporized by a grain-grain collision. Our results predict much less vaporization of colliding grains in interstellar shocks than previous estimates. This theory can also be used to determine the fraction of a colliding grain that melts, shatter, or undergoes a phase transformation to a higher density phase. In particular, the latter two processes can be much more important in interstellar shocks than vaporization. The sputtering of grains by impacting gas ions is reanalyzed based upon extensive laboratory studies and a theoretically derived 'universal'sputtering relation. The analytical results are compared to available experimental studies of sputtering of graphite/amorphous carbon, SiO2, SiC, Fe, and H2O. Sputtering yields for astrophysically relevant materials as a function of impact energy and ion mass are derived. These yields are also averaged over thermal impact spectrum and simple polynomial fits to the resulting yields as a function of temperature are presented. The derived sputtering yields are similar to those adopted in previous studies, except for graphite near threshold where the new yields are much larger due to a lower adopted binding energy. The ion bombardment will amorphitize the surface layers of interstellar grains. It will also convert graphite into hydrogenated amorphous carbon (HAC) to a depth of 10-20 A. It is suggested that these HAC surfaces are the carriers of the 3.4 micrometer absorption feature in the interstellar medium.

Tielens, A. G. G. M.↗
NASA NTRS2012

Isotopic Ratios in Titan's Methane: Measurements and Modeling

The existence of methane in Titan's atmosphere (approx. 6% level at the surface) presents a unique enigma, as photochemical models predict that the current inventory will be entirely depleted by photochemistry in a timescale of approx 20 Myr. In this paper, we examine the clues available from isotopic ratios (C-12/C-13 and D/H) in Titan's methane as to the past atmosphere history of this species. We first analyze recent infrared spectra of CH4 collected by the Cassini Composite Infrared Spectrometer, measuring simultaneously for the first time the abundances of all three detected minor isotopologues: (13)CH4, (12)CH3D, and (13)CH3D. From these we compute estimates of C-12/C-13 = 86.5 +/- 8.2 and D/H = (1.59 +/- 0.33) x 10(exp -4) , in agreement with recent results from the Huygens GCMS and Cassini INMS instruments. We also use the transition state theory to estimate the fractionation that occurs in carbon and hydrogen during a critical reaction that plays a key role in the chemical depletion of Titan's methane: CH4 + C2H yields CH3 + C2H2. Using these new measurements and predictions we proceed to model the time evolution of C-12/C-13 and D/H in Titan's methane under several prototypical replenishment scenarios. In our Model 1 (no resupply of CH4), we find that the present-day C-12/C-13 implies that the CH4 entered the atmosphere 60-1600 Myr ago if methane is depleted by chemistry and photolysis alone, but much more recently-most likely less than 10 Myr ago-if hydrodynamic escape is also occurring. On the other hand, if methane has been continuously supplied at the replenishment rate then the isotopic ratios provide no constraints, and likewise for the case where atmospheric methane is increasing, We conclude by discussing how these findings may be combined with other evidence to constrain the overall history of the atmospheric methane.

Nixon, C. A.↗
NASA NTRS1992

A parameter estimation algorithm for spatial sine testing - Theory and evaluation

This paper presents the theory and an evaluation of a spatial sine testing parameter estimation algorithm that uses directly the measured forced mode of vibration and the measured force vector. The parameter estimation algorithm uses an ARMA model and a recursive QR algorithm is applied for data reduction. In this first evaluation, the algorithm has been applied to a frequency response matrix (which is a particular set of forced mode of vibration) using a sliding frequency window. The objective of the sliding frequency window is to execute the analysis simultaneously with the data acquisition. Since the pole values and the modal density are obtained from this analysis during the acquisition, the analysis information can be used to help determine the forcing vectors during the experimental data acquisition.

Rost, R. W.↗
NASA NTRS1986

An economical semi-analytical orbit theory for micro-computer applications

An economical algorithm is presented for predicting the position of a satellite perturbed by drag and zonal harmonics J2 through J4. Simplicity being of the essence, drag is modeled as a secular decay rate in the semimajor axis (retarded motion) with the zonal perturbations modeled from a modified version of Brouwers formulas. The algorithm is developed as an alternative on-board orbit predictor; a back up propagator requiring low energy consumption; or a ground based propagator for microcomputer applications (e.g., at the foot of an antenna). An O(J2) secular retarded state partial matrix (matrizant) is also given to employ with state estimation. The theory has been implemented in BASIC on an inexpensive microcomputer, the program occupying under 8K bytes of memory. Simulated trajectory data and real tracking data are employed to illustrate the theory's ability to accurately accommodate oblateness and drag effects.

Gordon, R. A.↗
NASA NTRS1988

An economical semi-analytical orbit theory for micro-computer applications

An economical algorithm is presented for predicting the position of a satellite perturbed by drag and zonal harmonics J sub 2 through J sub 4. Simplicity being of the essence, drag is modeled as a secular decay rate in the semi-axis (retarded motion); with the zonal perturbations modeled from a modified version of the Brouwers formulas. The algorithm is developed as: an alternative on-board orbit predictor; a back up propagator requiring low energy consumption; or a ground based propagator for microcomputer applications (e.g., at the foot of an antenna). An O(J sub 2) secular retarded state partial matrix (matrizant) is also given to employ with state estimation. The theory was implemented in BASIC on an inexpensive microcomputer, the program occupying under 8K bytes of memory. Simulated trajectory data and real tracking data are employed to illustrate the theory's ability to accurately accommodate oblateness and drag effects.

Gordon, R. A.↗
NASA NTRS1982

Methods of sequential estimation for determining initial data in numerical weather prediction

Numerical weather prediction (NWP) is an initial-value problem for a system of nonlinear differential equations, in which initial values are known incompletely and inaccurately. Observational data available at the initial time must therefore be supplemented by data available prior to the initial time, a problem known as meteorological data assimilation. A further complication in NWP is that solutions of the governing equations evolve on two different time scales, a fast one and a slow one, whereas fast scale motions in the atmosphere are not reliably observed. This leads to the so called initialization problem: initial values must be constrained to result in a slowly evolving forecast. The theory of estimation of stochastic dynamic systems provides a natural approach to such problems. For linear stochastic dynamic models, the Kalman-Bucy (KB) sequential filter is the optimal data assimilation method, for linear models, the optimal combined data assimilation-initialization method is a modified version of the KB filter.

Cohn, S. E.↗
NASA NTRS2014

Combined Uncertainty and A-Posteriori Error Bound Estimates for General CFD Calculations: Theory and Software Implementation

This workshop presentation discusses the design and implementation of numerical methods for the quantification of statistical uncertainty, including a-posteriori error bounds, for output quantities computed using CFD methods. Hydrodynamic realizations often contain numerical error arising from finite-dimensional approximation (e.g. numerical methods using grids, basis functions, particles) and statistical uncertainty arising from incomplete information and/or statistical characterization of model parameters and random fields. The first task at hand is to derive formal error bounds for statistics given realizations containing finite-dimensional numerical error [1]. The error in computed output statistics contains contributions from both realization error and the error resulting from the calculation of statistics integrals using a numerical method. A second task is to devise computable a-posteriori error bounds by numerically approximating all terms arising in the error bound estimates. For the same reason that CFD calculations including error bounds but omitting uncertainty modeling are only of limited value, CFD calculations including uncertainty modeling but omitting error bounds are only of limited value. To gain maximum value from CFD calculations, a general software package for uncertainty quantification with quantified error bounds has been developed at NASA. The package provides implementations for a suite of numerical methods used in uncertainty quantification: Dense tensorization basis methods [3] and a subscale recovery variant [1] for non-smooth data, Sparse tensorization methods[2] utilizing node-nested hierarchies, Sampling methods[4] for high-dimensional random variable spaces.

CFD↗
NASA NTRSDate not supplied

Composition-property correlations in NiTi-based shape memory alloys from the first principles

Development of shape memory alloys (SMA) has been traditionally accomplished by means of extensive empirical efforts, with a very limited support from phenomenological models and related tools. We present a theoretical framework based on the Hamiltonian formalism, which connects important thermodynamic properties directly to the relative energies (the eigenvalues of the Hamiltonian), computed from the first principles using density functional theory. The estimates based on this formalism allow to establish correlations between composition and physical properties, such as relative energies, phase transition temperatures, hysteresis, thermal expansion, and other thermodynamic information. Importantly, estimates and correlations not only provide a fast answer, but also elucidate underpinning of thermodynamic features in terms of the electronic structure. Using this framework, we consider phase transformations and correlations between the selected properties and composition in the NiTi-based ternary and multicomponent shape memory alloys. Our theoretical guidance facilitates design and development of future alloys.

shape memory alloys↗
NASA NTRS1988

Statistical analysis of SSME system data

A statistical methodology to enhance the Space Shuttle Main Engine (SSME) performance prediction accuracy is proposed. This methodology was to be used in conjunction with existing SSME performance prediction computer codes to improve parameter prediction accuracy and to quantify that accuracy. However, after a review of related literature, researchers concluded that the proposed problem required a coverage of areas such as linear and nonlinear system theory, measurement theory, statistics, and stochastic estimation. Since state space theory is the foundation for a more complete study of each of the before mentioned areas, these researchers chose to refocus emphasis to cover the more specialized topic of state vector estimation procedures. State vector estimation was also selected because of current and future concerns by NASA for SSME performance evaluation; i.e., there is a current interest in an improved evaluation procedure for actual SSME post flight performance as well as for post static test performance of a single SSME. A current investigation of analytical methods may be used to improve test stand failure detection. This paper considers the issue of post flight/test state variable reconstruction through the application of observations made on the output of the Space Shuttle propulsion system. Rogers used the Kalman filtering procedure to reconstruct the state variables of the Space Shuttle propulsion system. An objective of this paper is to give the general setup of the Kalman filter and its connection to linear regression. A second objective is to examine the reconstruction methodology for application to the reconstruction of the state vector of a single Space Shuttle Main Engine (SSME) by using static test firing data.

Temple, Enoch C.↗
DOE OSTI2024

High-Pressure Rate Rules for Ether Alkylperoxy Radical Isomerization

The first isomerization reaction of an alkylperoxy (RO 2 ) radical holds significant importance in low-temperature oxidation, as it governs the branching ratios of the hydroperoxyalkyl (QOOH) radicals, which influence the competition between the chain-propagation and chain-branching reactions. In this study, we systematically calculated high-pressure rate rules for the RO 2 isomerization reaction of monoethers, exploring 5-, 6-, 7-, and 8-membered ring transition states. Primary, secondary, and tertiary carbon sites, where both the abstracting peroxy group and the abstracted hydrogen are located, were considered, with particular emphasis on distinguishing between secondary carbons adjacent (alpha) and nonadjacent to the ether functional group. Using the G4//B3LYP/6-311++G(2df,2pd) level of theory and the transition state theory, we estimated the rate constants and the Arrhenius coefficient for over 120 possible isomerization reactions. We examined the effect of ring size and ring atoms, revealing that 6- and 7-membered ring isomerizations were generally the fastest. The impact of the ether functional group on transition states was investigated by comparing reactions with identical ring size, peroxy, and radical positions, but with the ether functional group positioned either outside (i.e., out) or inside (i.e., in) the transition state ring, leading to differences in the rate constants. When comparing to analogous alkane rate constants, differences of up to an order of magnitude were observed, underscoring the need for caution when assigning rate rules by analogy. We applied our rate constants in the di-iso-butyl ether kinetic model and evaluated their influence on low-temperature chemistry finding that they altered the branching ratios by up to a factor of 9, highlighting the significance of site-specific rate constants for more accurate low-temperature modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Source shape estimation for neutron imaging systems using convolutional neural networks

Neutron imaging systems are important diagnostic tools for characterizing the physics of inertial confinement fusion reactions at the National Ignition Facility (NIF). In particular, neutron images give diagnostic information on the size, symmetry, and shape of the fusion hot spot and surrounding cold fuel. Images are formed via collection of neutron flux from the source using a system of aperture arrays and scintillator-based detectors. Currently, reconstruction of fusion source geometry from the collected neutron images is accomplished by solving a computationally intensive maximum likelihood estimation problem via expectation maximization. In contrast, it is often useful to have simple representations of the overall source geometry that can be computed quickly. In this work, we develop convolutional neural networks (CNNs) to reconstruct the outer contours of simple source geometries. We compare the performance of the CNN for penumbral and pinhole data and provide experimental demonstrations of our methods on both non-noisy and noisy data.

Machine learning, neutron imaging, source reconstr↗
DOE OSTI2025

Absolute Hugoniot measurements in low-density plastic foams on the NIKE shock compression platform

The propagation of Mbar-range shock waves in low-density foam materials is of interest to target design in all approaches to inertial confinement fusion, high energy density physics, and laboratory astrophysics. We report absolute Hugoniot measurements for CH 1.72 N 0.086 O 0.37 plastic foams with 73 and 94 mg/cm 3 densities in the 32–107 km/s shock velocity range. The experiments were performed on the shock compression platform developed on the NIKE KrF laser facility at the U.S. Naval Research Laboratory. NIKE's 4 or 8-ns long flat-top laser pulses drive steady shock waves into foam targets at the ablative pressures of 1–7 Mbar. The propagation of the ablation and shock fronts is tracked continuously in time using streaked side-on monochromatic x-ray imaging radiography. The straight x−t trajectories of the shock and ablation fronts in the recorded streak images confirmed their steadiness. The SESAME tabulated equation of state predictions generally agrees with our Hugoniot data within a 95% confidence band. The experimental uncertainty of the evaluated shock density compression ratios remains large, indicating the need for more experiments and improved theoretical understanding of the strong shock propagation mechanisms in dry foams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Conformal duality of the nonlinear Schrödinger equation: Theory and applications to parameter estimation

The nonlinear Schrödinger equation (NLSE) in one spatial dimension has stationary solutions similar to those of the linear Schrödinger equation (LSE) as well as more exotic solutions such as solitary waves and quantum droplets. Here, we present a newly discovered conformal duality which unifies the stationary and time-dependent traveling-wave solutions of the one-dimensional cubic-quintic NLSE, the cubic NLSE and LSE. Any two systems that are classified by the same single number called the cross ratio are related by this symmetry. Notably, the conformal duality can also be adapted in Newtonian mechanics and serves as a powerful tool for investigating physical systems that otherwise cannot be directly accessed in experiments. Further, we show that the conformal symmetry is a valuable resource to substantially improve NLSE parameter estimation from noisy empirical data by introducing an optimization afterburner. The new method therefore has far reaching practical applications for nonlinear physical systems. Published by the American Physical Society 2025

Reinhardt, David B. (ORCID:0009000409812838)↗