Search NASA⌕ Search

SEARCH · Search NASA

Results for “expansion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Composite Laminate With Coefficient of Thermal Expansion Matching D263 Glass

The International X-ray Observatory project seeks to make an X-ray telescope assembly with 14,000 flexible glass segments. The glass used is commercially available SCHOTT D263 glass. Thermal expansion causes the mirror to distort out of alignment. A housing material is needed that has a matching coefficient of thermal expansion (CTE) so that when temperatures change in the X-ray mirror assembly, the glass and housing pieces expand equally, thus reducing or eliminating distortion. Desirable characteristics of this material include a high stiffness/weight ratio, and low density. Some metal alloys show promise in matching the CTE of D263 glass, but their density is high compared to aluminum, and their stiffness/weight ratio is not favorable. A laminate made from carbon fiber reinforced plastic (CFRP) should provide more favorable characteristics, but there has not been any made with the CTE matching D263 Glass. It is common to create CFRP laminates of various CTEs by stacking layers of prepreg material at various angles. However, the CTE of D263 glass is 6.3 ppm/ C at 20 C, which is quite high, and actually unachievable solely with carbon fiber and resin. A composite laminate has been developed that has a coefficient of thermal expansion identical to that of SCHOTT D263 glass. The laminate is made of a combination of T300 carbon fiber, Eglass, and RS3C resin. The laminate has 50% uni-T300 plies and 50% uni-E-glass plies, with each fiber-layer type laid up in a quasi-isotropic laminate for a total of 16 plies. The fiber volume (percent of fiber compared to the resin) controls the CTE to a great extent. Tests have confirmed that a fiber volume around 48% gives a CTE of 6.3 ppm/ C. This is a fairly simple composite laminate, following well established industry procedures. The unique feature of this laminate is a somewhat unusual combination of carbon fiber with E-glass (fiberglass). The advantage is that the resulting CTE comes out to 6.3 ppm/ C at 20 C, which matches D263 glass. The trick with this laminate is to establish the proper fiber volume to get the desired CTE. Laminates were made with several different fiber volumes and coupons were tested to establish the relationship between fiber volume and CTE. Testing proved that fiber volume should be about 48%.

Robinson, David↗
NASA NTRS1960

Thermal Expansion of Hafnium Carbide

Since hafnium carbide (HfC) has a melting point of 7029 deg. F, it may have many high-temperature applications. A literature search uncovered very little information about the properties of HfC, and so a program was initiated at the Lewis Research Center to determine some of the physical properties of this material. This note presents the results of the thermal expansion investigation. The thermal-expansion measurements were made with a Gaertner dilatation interferometer calibrated to an accuracy of +/- 1 deg. F. This device indicates expansion by the movement of fringes produced by the cancellation and reinforcement of fixed wave-length light rays which are reflected from the surfaces of two parallel quartz glass disks. The test specimens which separate these disks are three small cones, each approximately 0.20 in. high.

Grisaffe, Salvatore J.↗
NASA NTRS2016

Expansion of Tabulated Scattering Matrices in Generalized Spherical Functions

An efficient way to solve the vector radiative transfer equation for plane-parallel turbid media is to Fourier-decompose it in azimuth. This methodology is typically based on the analytical computation of the Fourier components of the phase matrix and is predicated on the knowledge of the coefficients appearing in the expansion of the normalized scattering matrix in generalized spherical functions. Quite often the expansion coefficients have to be determined from tabulated values of the scattering matrix obtained from measurements or calculated by solving the Maxwell equations. In such cases one needs an efficient and accurate computer procedure converting a tabulated scattering matrix into the corresponding set of expansion coefficients. This short communication summarizes the theoretical basis of this procedure and serves as the user guide to a simple public-domain FORTRAN program.

scattering matrix↗
NASA NTRS2018

Trilogy, A Planetary Geodesy Mission Concept for Measuring the Expansion of the Solar System

The scale of the solar system is slowly changing, likely increasing as a result of solar mass loss, with additional change possible if there is a secular variation of the gravitational constant, G. The measurement of the change of scale could provide insight into the past and the future of the solar system, and in addition a better understanding of planetary motion and fundamental physics. Estimates for the expansion of the scale of the solar system are of order 1.5 cm year(exp -1) AU(exp -1), which over several years is an observable quantity with present-day laser ranging systems. This estimate suggests that laser measurements between planets could provide an accurate estimate of the solar system expansion rate. We examine distance measurements between three bodies in the inner solar system -- Earth's Moon, Mars and Venus -- and outline a mission concept for making the measurements. The concept involves placing spacecraft that carry laser ranging transponders in orbit around each body and measuring the distances between the three spacecraft over a period of several years. The analysis of these range measurements would allow the co-estimation of the spacecraft orbit, planetary ephemerides, other geophysical parameters related to the constitution and dynamics of the central bodies, and key geodetic parameters related to the solar system expansion, the Sun, and theoretical physics.

David E Smith↗
NASA NTRS2018

The Expansion of the Young Supernova Remnant 0509-68.7 (N103B)

We present a second epoch of Chandra observations of the Type Ia Large Magellanic Cloud supernova remnant(SNR) 0509-68.7 (N103B) obtained in 2017. When combined with the earlier observations from 1999, we have a17.4 year baseline with which we can search for evidence of the remnant's expansion. Although the lack of strongpoint source detections makes absolute image alignment at the necessary accuracy impossible, we can measure thechange in the diameter and the area of the remnant, and find that it has expanded by an average velocity of 4170(2860, 5450) km s1. This supports the picture of this being a young remnant; this expansion velocity correspondsto an undecelerated age of 850 years, making the real age somewhat younger, consistent with results from lightecho studies. Previous infrared observations have revealed high densities in the western half of the remnant, likelyfrom circumstellar material, so it is probable that the real expansion velocity is lower on that side of the remnantand higher on the eastern side. A similar scenario is seen in Kepler's SNR. N103B joins the rare class ofMagellanic Cloud SNRs with measured proper motions.

Williams, Brian J.↗
NASA NTRS2014

Mapping Urban Expansion Across North America Using Multi-Temporal Landsat and Nighttime Lights Data

Urban expansion and the associated changes in land cover have important climatic, hydrologic, biophysical and ecologic and socio-economic impacts on the environment. Yet, despite todays abundance of remote sensing data, an automated characterization of large-scale historical changes in urban spatial extent remains a challenge due to the inherent complexity and variability of the urban environment, the lack of a spectral signature unique to urban land cover, and the absence of an unambiguous definition of what is urban versus non-urban.Here we present a consistent, robust, scalable, physically- based methodology for characterization of urban expansion using Landsat observations. We use atmospherically corrected Landsat Global Land Survey time series, Web-enabled Landsat data time series, DMSP-OLS and NPP-VIIRS nighttime lights, for mapping the built-up and vegetated components of urban settlements at 30m resolution through multi- temporal standardized spectral mixture analysis. The methodology is tested and validated over the North American continent where it provides a first quantification of urban expansion and vegetation abundance changes from 1990 to 2010.

Milesi, Cristina↗
NASA NTRS2019

Universal Expansion with Spatially Varying G

We calculate the expansion of the Universe under the assumptions that G varies in space and the radial size r of the Universe is very large (we call this the MOND regime of varying-G gravity). The inferred asymptotic behaviour turns out to be different from that found by McCrea & Milne in 1934 and our equations bear no resemblance to those of the relativistic case. In this cosmology, the scale factor R(t) increases linearly with time t, the radial velocity is driven by inertia, and gravity is incapable of hindering the expansion. Yet, Hubble’s law is borne out without any additional assumptions. When we include a repulsive acceleration a(sub de) due to dark energy, the resulting universal expansion is then driven totally by this new term and the solutions for a(sub de) → 0 do not reduce to those of the a(sub de) ≡ 0 case. This is a realization of a new Thom catastrophe: The inclusion of the new term alters the conservation of energy and the dark energy solutions are not reducible to those in the case without dark energy.

Christodoulou, Dimitris M.↗
NASA NTRS2019

Soy expansion in Brazil's Cerrado

The Cerrado biome is Brazil's breadbasket and a major provider of ecosystem services, though these dual roles are increasingly at odds, in part because there are few mechanisms to protect remaining vegetation from large‐scale agricultural expansion. We assessed Cerrado conversion to soy using over 580,000 property boundaries, covering 77% of the biome that is eligible for commercial land use, and using microwatersheds, to cover 100% of eligible areas. Soy expansion accounted for 22% of conversion during 2003–14. Only 15% of clearing exceeded restrictions on private properties under the Forest Code (FC). However, 51% of soy farms have violated the FC, five times the rate of other farms. As a leading cause of both Cerrado conversion and FC violations, the soy sector has environmental and economic incentives to shift production to already cleared land. We used suitability maps to identify potential pathways for soy expansion across both old and new cropland frontiers.

Brazil↗
NASA NTRS2023

Measurement of Test Time in the NASA Ames EAST Expansion Cone Facility in Entry 63 and Possible Techniques for Increasing Test Time

The Ames EAST facility and its modes of operation (expansion tube, expansion cone) are described. A buffer section may or may not be used between the driver and the driven tube. Previous expansion tube (without the cone) entries are reviewed. Test times of 4 to 5 microsec were achieved at shock speeds up to 11 km/s. The test conditions and results of the present entry (entry 63) (with the cone) are given. Test times were found to correlate roughly with the density ratio across the buffer gas - driven gas or driver - driven gas interface. Tests with a 12 inch long conical driver without a buffer yielded three runs with test times of ~8 km/s and 3 runs with test times of 4 to 6 microsecs. With a buffer, test times for 4 runs of ~9 microsecs and for 2 runs of 3 to 6 microsecs were obtained. Adding argon to the buffer was found not to improve the test time. Tests with a 30 inch long driver without a buffer yielded test times of 14+, ~10, 7.5 (2 runs) and 5.5 (2 runs) microsecs. Based on one shot, data for the 30 inch driver suggests that test times up to ~14 microseconds could be obtained. The repeatability of that shot, of course, must be established. Suggestions are given to increase test times further.

Electric arc shock tube↗
NASA NTRS2022

Recent Trends in Transport of Surface Carbonaceous Aerosols to the Upper-Troposphere-Lower-Stratosphere Linked to Expansion of the Asian Summer Monsoon Anticyclone

Using MERRA-2 re-analyses, we have examined recent trends (2000-2019) in transport of surface carbonaceous aerosols (CA), i.e., organic carbon (OC) and black carbon (BC), to the upper troposphere (UT) and lower stratosphere (LS) during the Asian summer monsoon (ASM). We find a significant increased concentration of UTLS CA, linked to a linear trend in an expansion of the Asian Summer Monsoon Anticyclone (ASMA). Over core monsoon latitudes (25°-35°N), the trends in UTLS CA are enabled by increased upward transport from surface sources via an intensified monsoon meridional circulation, with increased latent heating over the southern Tibetan Plateau and foothill regions, enhanced by feedback processes associated with radiative heating by UTLS CA. In the extra-tropics, increased UTLS CA stems primarily from an extended source of increased wildfire emissions over eastern Siberia and northern Asia, coincident with a large-scale anomalous anticyclone with enhanced surface warming and drying near (80°-120°E, 55°-70°N). Here, carbonaceous aerosols are transported upward from the surface to the LS, likely by increased pyro-convection associated with enhanced wildfires, and enter the tropical UTLS via increased equator ward transport on the eastern flanks of anomalous upper-level anticyclones, coupled to the expanded ASMA. Overall, the increasing UTLS CA trends associated with expansion of the ASMA are consistent with a hydrostatic expansion of a warming troposphere, reflected in a rise in the tropical tropopause and consequential dynamical adjustments of the [ASM subtropical jetstream, modulating the climate of the greater ASM region.

interdecadal trends↗
NASA NTRSDate not supplied

Urban Expansion and Climate Change: Investigating the Impact of Future Scenarios on Child Health

Cities in the poorest countries of the world are rapidly urbanizing. In fact, some of the fastest growing cities on the planet are found in sub-Saharan Africa. Many people benefit from economic, educational, and health opportunities that exist in cities and, as a result, city-dwellers often face less risk of poverty and disease in the context of climate change than their rural-dwelling counterparts. However, rapid urbanization, resulting from a large and constant influx of migrants from rural areas, can put pressure on existing social, economic, and health systems. For poor cities, they face a challenge to support existing residents while also expanding to support the needs of migrants, many of whom are deeply impoverished. Additionally, in a climate change, linked to heat waves, floods, droughts, and other related events, can add stress to complex urban food, health, hygiene, and housing systems. In this project we investigate urban expansion, climate change, and health in four major African cities – Ouagadougou, Addis Ababa, Nairobi, and Kigali. We consider different scenarios of urban expansion using historic and contemporary maps of urban extent, combined with climate (temperature, rainfall, and vegetation) and land cover combined with spatially referenced health information from the Demographic and Health Surveys (DHS) to investigate the relationships between urban dwelling, climate change and health. Temperature and rainfall scenarios are developed under different urban land use futures (expanding agricultural areas versus reducing agricultural areas) to examine the ways that individual health outcomes related to malnutrition vary under different potential future conditions. Preliminary results of the research highlight the importance of temperature for health, in particular, and suggest that while urban conditions related to urban infrastructure (e.g., educational attainment, electricity access, and improved hygiene) cannot reduce health risks to counter the impacts of high temperatures and reduced agricultural land. As cities in poor countries urbanize, city-dwellers face unique risks when droughts, heat waves, and other extreme weather events occur. In this project we explore urban land use conditions, climate conditions and health using future scenarios. Specifically we evaluate health outcomes in the future while considering different land use practices, urban expansion, temperature, and rainfall conditions to identify individual-level risk and protective factors. We compare results across four major cities in sub Saharan Africa.

Public Health↗
NASA NTRS1966

Two-point Taylor series expansions

Coefficients calculated for Taylor series expansion about two points - application of Taylor expansion to two-body problem

TWO-BODY PROBLEM↗
NASA NTRS2007

The JPL Cryogenic Dilatometer: Measuring the Thermal Expansion Coefficient of Aerospace Materials

This slide presentation details the cryogenic dilatometer, which is used by JPL to measure the thermal expansion coefficient of materials used in Aerospace. Included is a system diagram, a picture of the dilatometer chamber and the laser source, a description of the laser source, pictures of the interferometer, block diagrams of the electronics and software and a picture of the electronics, and software. Also there is a brief review of the accurace.error budget. The materials tested are also described, and the results are shown in strain curves, JPL measured strain fits are described, and the coefficient of thermal expansion (CTE) is also shown for the materials tested.

dilatometer↗
NASA NTRS2014

Comparison of the Thermal Expansion Behavior of Several Intermetallic Silicide Alloys Between 293 and 1523 K

Thermal expansion measurements were conducted on hot-pressed CrSi(sub 2), TiSi(sub 2), W Si(sub 2) and a two-phase Cr-Mo-Si intermetallic alloy between 293 and 1523 K during three heat-cool cycles. The corrected thermal expansion, (L/L(sub 0)(sub thermal), varied with the absolute temperature, T, as (deltaL/L(sub 0)(sub thermal) = A(T-293)(sup 3) + B(T-293)(sup 2) + C(T-293) + D, where A, B, C and D are regression constants. Excellent reproducibility was observed for most of the materials after the first heat-up cycle. In some cases, the data from the first heatup cycle deviated from those determined in the subsequent cycles. This deviation was attributed to the presence of residual stresses developed during processing, which are relieved after the first heat-up cycle.

silicides↗
NASA NTRS2014

Anomalous Expansion of Coronal Mass Ejections During Solar Cycle 24 and Its Space Weather Implications

The familiar correlation between the speed and angular width of coronal mass ejections (CMEs) is also found in solar cycle 24, but the regression line has a larger slope: for a given CME speed, cycle 24 CMEs are significantly wider than those in cycle 23. The slope change indicates a significant change in the physical state of the heliosphere, due to the weak solar activity. The total pressure in the heliosphere (magnetic + plasma) is reduced by approximately 40%, which leads to the anomalous expansion of CMEs explaining the increased slope. The excess CME expansion contributes to the diminished effectiveness of CMEs in producing magnetic storms during cycle 24, both because the magnetic content of the CMEs is diluted and also because of the weaker ambient fields. The reduced magnetic field in the heliosphere may contribute to the lack of solar energetic particles accelerated to very high energies during this cycle.

coronal mass ejections↗
NASA NTRS2016

Thermal Expansion Behavior of Hot-Pressed Engineered Matrices

Advanced engineered matrix composites (EMCs) require that the coefficient of thermal expansion (CTE) of the engineered matrix (EM) matches those of the fiber reinforcements as closely as possible in order to reduce thermal compatibility strains during heating and cooling of the composites. The present paper proposes a general concept for designing suitable matrices for long fiber reinforced composites using a rule of mixtures (ROM) approach to minimize the global differences in the thermal expansion mismatches between the fibers and the engineered matrix. Proof-of-concept studies were conducted to demonstrate the validity of the concept.

engineered matrix↗
NASA NTRS2023

Influence of Cation Species on Thermal Expansion of Y2Si2O7–Gd2Si2O7 Solid Solutions

Mixtures of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 were synthesized by solid-state reaction at 1600°C and characterized via in situ x-ray diffraction (XRD) to determine their coefficients of thermal expansion (CTE). All solid solutions within the system exhibited the orthorhombic δ-RE 2 Si 2 O 7 (Pna2 1 ) structure. Thermal expansion measurements of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 correlated well with reported values in literature, and all synthesized solid solutions exhibited CTEs between Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 . Generally, there was a slight decrease in CTE exhibited by the materials with increasing Gd 2 Si 2 O 7 content, with Gd 2 Si 2 O 7 having the lowest CTEs and Y 2 Si 2 O 7 the highest CTEs. The decrease in CTE was attributed to stronger bonds of Gd-O over Y-O, as determined by calculated crystal orbital Hamilton populations using density functional theory. However, such differences were very small and crystal structure was the dominating factor in CTE trends.

rare earth silicates↗