Search NASA⌕ Search

SEARCH · Search NASA

Results for “extensible”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

An extension of the localized artificial diffusivity method for immiscible and high density ratio flows

The localized artificial diffusivity (LAD) method is widely regarded as the preferred multi-material regularization scheme for the compact finite difference method, because it is conservative, easy to implement, and generally robust for a wide range of multi-material problems. However, traditional LAD methods face significant challenges when applied to flows with large density ratios and when maintaining thermodynamic equilibrium across material interfaces. These limitations arise from the formulation of the artificial diffusivity flux and the reliance on enthalpy diffusion for interface regularization. Additionally, traditional LAD methods struggle to ensure stability under large density ratio conditions, fail to maintain a finite interface thickness, and are therefore unsuitable for modeling immiscible interfaces. Here, in this work, we discuss the origins of these issues in traditional LAD methods and propose modifications which enable the simulation of large density ratio and immiscible flows. The proposed method targets the artificial diffusion fluxes at gradients and ringing in the volume fraction, rather than the mass fraction in traditional methods, to consistently regularize large density ratio interfaces. Furthermore, the proposed method introduces an artificial bulk density diffusion term to enforce equilibrium conditions across interfaces. To address the challenge of modeling immiscible flows, a conservative diffuse interface term is incorporated into the formulation to ensure a finite interface thickness. Specific consideration is taken in the design of the method to ensure that these crucial properties are maintained for N -material flows. The effectiveness of the proposed method is demonstrated through a series of canonical test cases, and its accuracy is validated by comparison with experimental data on micro-bubble collapse in water. These results highlight the method’s robustness and its ability to overcome the limitations of traditional LAD approaches.

Artificial diffusivity↗
DOE OSTI2022

π-Extension and chlorination of non-fullerene acceptors enable more readily processable and sustainable high-performance organic solar cells

Organic solar cells (OSCs) processed without halogenated solvents and complex treatments are essential for future commercialization. Herein, we report three novel small molecule acceptors (NFAs) consisting of a Y6-like core but with π-extended naphthalene with progressively more chlorinated end-capping groups and a longer branched chain on the Nitrogen atom. These NFAs exhibit good solubilities in non-chlorinated organic solvents, broad optical absorptions, close π-π stacking distances (3.63–3.84 Å), and high electron mobilities (~10 -3 cm 2 V -1 s -1 ). Further, the o-xylene processed and as-cast binary devices using PM6 as the donor polymer exhibit a PCE increasing upon progressive chlorination of the naphthalene end-capping group from 8.93% for YN to 14.38% for YN-Cl to 15.00% for YN-2Cl. Furthermore similarly processed ternary OSCs were fabricated by employing YN-Cl and YN-2Cl as the third component of PM6:CH1007 blends (PCE = 15.75%). Compared to all binary devices, the ternary PM6:CH1007:YN-Cl (1:1:0.2) and PM6:CH1007:YN-2Cl (1:1:0.2) cells exhibit significantly improved PCEs of 16.49% and 15.88%, respectively, which are among the highest values reported to date for non-halogenated solvent processed OSCs without using any additives and blend post-deposition treatments.

14 SOLAR ENERGY↗
DOE OSTI2026

A solid-state extrusion pathway extensible to upcycling aluminum scrap and end-of-life permanent magnets into ductile Al-6061/SmCo 5 structural magnetic composites

Permanent magnets offer strong potential for multifunctional structural components, but their inherent brittleness limits direct integration. Here, SolidStir® Extrusion (SSE) is used to embed SmCo5 powder into AA6061 in the solid state, and the resulting microstructure, interfacial chemistry, mechanical properties, and magnetic response are systematically characterized. SSE fragments the initial SmCo 5 powder into predominantly fine particles dispersed within an ultrafine Al matrix, with a volume fraction of ∼ 4–6 % in this proof-of-concept study. Interfacial reactions form a continuous Al–Co reaction layer, with local atomic-resolution indexing consistent with Al 13 Co 4 , together with Sm–Si-rich reaction products, while the matrix contains Sm–Co–Si-rich precipitates and Mg 2 Si, producing features from nanometers to micrometers. Compared with an Al extrudate, this architecture increases yield strength by ∼ 42 % and tensile strength by ∼ 31 %, while preserving uniform elongation, and it sustains work hardening in compression from 150 to 400 °C. The composite retained hard-magnetic behavior, with axial magnetization of 12.7 A·m 2 kg −1 at 6 T and intrinsic coercivity of 9.6 kOe. These findings demonstrate that SSE can produce Al-based load-bearing magnetic composites while preserving useful SmCo5 functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding the interaction of extension twinning and basal-plate precipitates in Mg-9Al using precession electron diffraction

Precession electron diffraction is used to characterize the interaction between ${10\bar{1}2}$ tensile twins and basal plate-like precipitates in a post-deformed, precipitate-dispersed Mg-9Al micropillar. We observed a heterogeneous distribution of precipitates in the micropillar sample, which enabled the study of the different stages involved in twin precipitate interactions. We show that twin nucleation was promoted, taking place on the surface, as well as from the interior of the micropillar. Twin tip propagation and twin growth were hindered by the precipitates. Twin tips either were arrested by precipitates and new twins formed on the other side of the precipitate, or continued to grow around the precipitate without the re-nucleation events. During twin thickening, the precipitates did not significantly alter the shear-dominant twin boundary migration mechanism, as evidenced by the relatively flat twin boundaries around the partially embedded precipitates. However, the twin boundary migration was retarded by the precipitates, especially in regions confined by closely-spaced precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

STOPGAP—A time-of-flight extension for the Belle II TOP barrel PID system

The Belle II barrel region is instrumented with the Time of Propagation (TOP) particle identification system. Due to its mechanical design, the individual TOP modules do not overlap, leaving a gap of around 2 cm between them in the azimuthal direction. This leads to a 6%–9% drop in acceptance, depending on the track’s momentum. We propose a solution to remedy these gaps by instrumenting them with fast silicon detectors to directly measure the time-of-flight of traversing particles. We present here a simulation study discussing the performance requirements and the possible sensor technologies, and we demonstrate that such a project could be realized with novel, fast monolithic CMOS sensors, or alternatively AC-LGAD sensors, both of which are expected to reach MIP timing resolutions of down to 50 ps or better.

Hartbrich, Oskar↗
DOE OSTI2020

Helicity-dependent extension of the McLerran–Venugopalan model

We construct a generalization of the McLerran-Venugopalan (MV) model including helicity effects for a longitudinally polarized target (a proton or a large nucleus). The extended MV model can serve as the initial condition for the helicity generalization of the JIMWLK evolution equation constructed in our previous paper, as well as for calculation of helicity-dependent observables in the quasi-classical approximation to QCD.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗