Search NASA⌕ Search

SEARCH · Search NASA

Results for “factory methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Throughput Optimization of Molybdenum Carbide Nanoparticle Catalysts in a Continuous Flow Reactor Using Design of Experiments

Transition metal carbides (TMCs) have attracted significant attention because of their applications toward a wide range of catalytic transformations. However, the practicality of their synthesis is still limited because of the harsh conditions in which most TMCs are prepared. Recently, a solution-phase synthesis of phase-pure a-MoC1-x nanoparticles was presented. While this synthetic route yielded nanoparticles with exceptional catalytic performance, the reaction parameter space was not explored, and catalyst throughput was not optimized for scale-up. Continuous flow platforms coupled with statistical design of experiments (DoE) can provide a powerful method for understanding the reaction parameter space for optimizations. Here, we demonstrate the use of statistical DoE in tandem with response surface methodology for a parametric screening analysis to optimize the throughput of a MoC1-x nanoparticle synthesis utilizing a millifluidic flow reactor. A full factorial design was implemented to evaluate four input variables (reaction temperature, flow rate, solvent fraction of oleylamine, and precursor concentration) that carry statistically significant effects on three responses (throughput, residence time, and isolated yield). A Doehlert matrix was implemented to investigate each significant variable at a higher number of levels to optimize throughput. Our results give a nonintuitive set of experimental conditions that resulted in an optimized throughput of 2.2 g h-1. This translates to a 50-fold increase in throughput compared to the previously reported batch method. The catalytic performance of the MoC1-x nanoparticles produced under optimized throughput was demonstrated in the CO2 hydrogenation reaction. This DoE screening analysis and throughput optimization of MoC1-x synthesis open the door to an increased feasibility for scale-up.

design of experiments↗

SU-E-T-403: Evaluation of the Beam Performance of a Varian TrueBeam Linear Accelerator Under External Device-Based Gated Delivery Conditions

Purpose: To examine the beam performance of a Varian TrueBeam linear accelerator under external device-based gated delivery conditions. Methods: Six gating cycles were used to evaluate the gating performance of a standard production TrueBeam system that was not specially tuned in any way. The system was equipped with a factory installed external gating interface (EXGI). An in-house EXGI tester box was used to simulate the input gating signals. The gating cycles were selected based on long beam-on and short beam-off times, short beam-on and long beam-off times, or equal beam on and off times to check linac performance. The beam latencies were measured as the time difference between the logic high gating signal and the first or last target pulses with an oscilloscope. Tissue-Phantom Ratio, beam flatness, and dose distributions from 5 different plans were measured using the 6 different gating durations and the un-gated irradiation. A PTW 729 2-D array was used to compare 5 plans versus the un-gated delivery with a 1%/1mm gamma index passing criteria. Results: The beam latencies of the linac were based off of 20 samples for beam-on and beam-off, for each gating cycle. The average beam-on delays were measured to be between 57 and 66msec, with a maximum of 88 msec. The beam off latencies averaged between 19 and 26msec, with a maximum of 48 msec. TPR20,10 measurements showed beam energy stability within 0.5% of the un-gated delivery. Beam flatness was better than 2.5% for all gated cycles. All but two deliveries, the open field with 4 seconds on, 1 second off, and a five field IMRT plan with 0.5 seconds on, 2.5 seconds off, had >90% passing rate. Conclusion: TrueBeam demonstrates excellent beam stability with minimal beam latencies under external device-based gated operations. Dosimetric measurements show minimal variation in beam energy, flatness, and plan delivery. Authors are employees of Varian Medical Systems, Inc.

60 APPLIED LIFE SCIENCES↗

Software technology insertion: A study of success factors

Managing software development in large organizations has become increasingly difficult due to increasing technical complexity, stricter government standards, a shortage of experienced software engineers, competitive pressure for improved productivity and quality, the need to co-develop hardware and software together, and the rapid changes in both hardware and software technology. The 'software factory' approach to software development minimizes risks while maximizing productivity and quality through standardization, automation, and training. However, in practice, this approach is relatively inflexible when adopting new software technologies. The methods that a large multi-project software engineering organization can use to increase the likelihood of successful software technology insertion (STI), especially in a standardized engineering environment, are described.

Lydon, Tom↗

Host Galaxies of Type Ic and Broad-lined Type Ic Supernovae from the Palomar Transient Factory: Implications for Jet Production

Unlike ordinary supernovae (SNe), some of which are hydrogen and helium deficient (called Type Ic SNe), broadlined Type Ic SNe (SNe Ic-bl) are very energetic events, and only SNe Ic-bl are coincident with long-duration gamma-ray bursts (GRBs). Understanding the progenitors of SN Ic-bl explosions versus those of their SNIc cousins is key to understanding the SN–GRB relationship and jet production in massive stars. Here we present the largest existing set of host galaxy spectra of 28 SNe Ic and 14 SNe Ic-bl, all discovered by the same galaxy untargeted survey, namely, the Palomar Transient Factory (PTF). We carefully measure their gas-phase metallicities, stellar masses (M*), and star formation rates (SFRs). We further reanalyze the hosts of 10 literature SN–GRBs using the same methods and compare them to our PTF SN hosts with the goal of constraining their progenitors from their local environments. We find that the metallicities, SFRs, and M* values of our PTF SN Ic-bl hosts are statistically comparable to those of SN–GRBs but significantly lower than those of the PTF SNe Ic. The mass–metallicity relations as defined by the SNe Ic-bl and SN–GRBs are not significantly different from the same relations as defined by Sloan Digital Sky Survey galaxies, contradicting claims by earlier works. Our findings point toward low metallicity as a crucial ingredient for SN Ic-bl and SN–GRB production since we are able to break the degeneracy between high SFR and low metallicity. We suggest that the PTF SNe Ic-bl may have produced jets that were choked inside the star or were able to break out of the star as unseen low-luminosity or off-axis GRBs.

Maryam Modjaz↗

Concentration of major and trace elements in the Miocene lignite from the Canakkale-Can coalfield

This study focuses on major and trace element concentrations of three lignite samples, of which two are from the working lignite seam and one from a feed coal to an thermal power plant. The Canakkale-Can lignite deposit is currently being mined by open-cast mining methods despite its high sulfur content. The production lignites are mainly consumed by a fluidized-bed thermal power plant with 2 160 MW capacity and less domestic heating and industrial factories around Can. Major oxide compositions of the coal ash samples imply that the more abundant oxides are SiO{sub 2} and Al{sub 2}O{sub 3} and less CaO and Fe2O{sub 3}. Trace element concentrations in the samples on whole-coal basis show that three samples analyzed were enriched in V, and also concentrations of B, Sc, Sn, Th, Tl, and U in one sample that exceed the range values of most world coals.

01 COAL, LIGNITE, AND PEAT↗

Search for B{sup +{yields}}l{sup +{nu}}{sub l} recoiling against B{sup -{yields}}D{sup 0}l{sup -{nu}}X

We present a search for the decay B{sup +{yields}}l{sup +{nu}}{sub l}(l={tau},{mu}, or e) in (458.9{+-}5.1)x10{sup 6} BB pairs recorded with the BABAR detector at the PEP-II B-factory. We search for these B decays in a sample of B{sup +}B{sup -} events where one B-meson is reconstructed as B{sup -{yields}}D{sup 0}l{sup -{nu}}X. Using the method of Feldman and Cousins, we obtain B(B{sup +{yields}{tau}+{nu}}{sub {tau}})=(1.7{+-}0.8{+-}0.2)x10{sup -4}, which excludes zero at 2.3{sigma}. We interpret the central value in the context of the standard model and find the B meson decay constant to be f{sub B}{sup 2}=(62{+-}31)x10{sup 3} MeV{sup 2}. We find no evidence for B{sup +{yields}}e{sup +{nu}}{sub e} and B{sup +{yields}{mu}+{nu}}{sub {mu}}and set upper limits at the 90% C.L. B(B{sup +{yields}}e{sup +{nu}}{sub e})<0.8x10{sup -5} and B(B{sup +{yields}{mu}+{nu}}{sub {mu}})<1.1x10{sup -5}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cross sections of e{sup +}e{sup -}{yields}{gamma}VV and e{sup +}e{sup -}{yields}{gamma}{gamma}V

Cross sections of the e{sup +}e{sup -} annihilate into one photon and two vector mesons, such as J/{psi}{rho}, J/{psi}{phi}, and {rho}{phi} at the center of mass energy {radical}(s)=10.58 GeV are calculated. These shed light on the measurement of the e{sup +}e{sup -} annihilation cross section via radiative return in B factories. At another center of mass energy {radical}(s)=3.097 GeV, namely, the J/{psi} resonance peak, the cross sections for the processes e{sup +}e{sup -}{yields}{gamma}VV and e{sup +}e{sup -}{yields}{gamma}{gamma}V (with V being {rho}, {omega}, or {phi}) are calculated with similar methods. These calculations give an estimation of the background levels in the study of radiative or double radiative decays of J/{psi}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High precision tests of QCD without scale or scheme ambiguities: The 40th anniversary of the Brodsky–Lepage–Mackenzie method

A key issue in making precise predictions in QCD is the uncertainty in setting the renormalization scale μ r and thus determining the correct values of the QCD running coupling α s (μ r ) at each order in the perturbative expansion of a QCD observable. It has often been conventional to simply set the renormalization scale to the typical scale of the process Q and vary it in the range μ r $\in$ [Q/2, 2Q] in order to estimate the theoretical error. This is the practice of Conventional Scale Setting (CSS). The resulting CSS prediction will however depend on the theorist’s choice of renormalization scheme and the resulting pQCD series will diverge factorially. It will also disagree with renormalization scale setting used in QED and electroweak theory thus precluding grand unification. A solution to the renormalization scale-setting problem is offered by the Principle of Maximum Conformality (PMC), which provides a systematic way to eliminate the renormalization scale-and-scheme dependence in perturbative calculations. The PMC method has rigorous theoretical foundations, it satisfies Renormalization Group Invariance (RGI) and preserves all self-consistency conditions derived from the renormalization group. The PMC cancels the renormalon growth, reduces to the Gell-Mann–Low scheme in the N c → 0 Abelian limit and leads to scale- and scheme-invariant results. The PMC has now been successfully applied to many high-energy processes. In this article we summarize recent developments and results in solving the renormalization scale and scheme ambiguities in perturbative QCD. In particular, we present a recently developed method the PMC ∞ and its applications, comparing the results with CSS. The method preserves the property of renormalizable SU(N)/U(1) gauge theories defined as Intrinsic Conformality (iCF). This property underlies the scale invariance of physical observables and leads to a remarkably efficient method to solve the conventional renormalization scale ambiguity at every order in pQCD. This new method reflects the underlying conformal properties displayed by pQCD at NNLO, eliminates the scheme dependence of pQCD predictions and is consistent with the general properties of the PMC. A new method to identify conformal and β-terms, which can be applied either to numerical or to theoretical calculations is also shown. We present results for the thrust and C-parameter distributions in e + e - annihilation showing errors and comparison with the CSS. We also show results for a recent innovative comparison between the CSS and the PMC ∞ applied to the thrust distribution investigating both the QCD conformal window and the QED N c → 0 limit. In order to determine the thrust distribution along the entire renormalization group flow from the highest energies to zero energy, we consider the number of flavors near the upper boundary of the conformal window. In this flavor-number regime the theory develops a perturbative infrared interacting fixed point. These results show that PMC ∞ leads to higher precision and introduces new interesting features in the PMC. In fact, this method preserves with continuity the position of the peak, showing perfect agreement with the experimental data already at NNLO. We also show a detailed comparison of the PMC ∞ with the other PMC approaches: the multi-scale-setting approach (PMCm) and the single-scale-setting approach (PMCs) by comparing their predictions for three important fully integrated quantities R e+e- , R$_Τ$ and Γ (H→$b\bar{b}$) up to the four-loop accuracy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Blue Rock CropSpanPV - Low Cost Racking for Agricultural Solar Photovoltaics

In this work, a total of four solar panel layouts, applied to Agrivoltaics, are investigated. This study presents two hypotheses: 1. Prefabrication - Lower total cost can be achieved by constructing a pre-assembled, pre-wired solar array in a factory, with automation, then rapidly deploying it in the field. 2. Tension Structures - Using tension structures in a way to suspend an overhead solar array also reduces costs when compared to conventional support methods. Designs are presented for frames to hold the panels. Configurations are advanced to connect the frames into arrays. Supports and foundations to hold the arrays in the desired layout are calculated, selected and presented. Cost models are prepared for the four layouts, which include definition of the business enterprise, the manufacturing operation, and the required facility for production at scale. Cost models include, detail material and task/labor take-offs for both manufacturing and installation. Comparisons with conventional system adapted to Agrivoltaics reveal that the two hypotheses do not hold true. A prefabricated array requires additional material that is not needed in the base system and the cost of this additional material is not outweighed by the cost savings of reduced field installation. The cost of wire rope for a tension structure does result in an economy of material, however, the cost of end connections and tensioning devices adds significantly to the cost of the overall tension structure. Foundation loads with tension structures, especially the large wind uplift seen with a fixed tilt solar array, impose significant constraints and high costs. The following conclusions are recommended for further consideration: 1. Best Case Agrivoltaic Configuration - The best value/lowest cost configuration for agrivoltaics is the installation of solar panels mounted on a single axis tracker in either a 2-in-portrait or 2-in landscape arrangement. This is useful for grazing lands and for staple crops which require high light levels. These applications represent the vast majority of the potential agrivoltaic market. Important elements in this configuration are the specific geometric layout coordinated with the various field operations and a control system linked between the farm equipment and single axis tracker. The control system is to monitor location and orientation, then actively tilt the solar panels or brake the field equipment to provide clearance and avoid collisions. 2. Long Span Applications - The use of tension structures for an overhead fixed tilt array is beneficial where long spans are a necessity, especially where the base support in the project location has consolidated rock near the surface or some other solid structure. One application is spanning wide irrigation canals. Another may be as an installation at the top deck of parking structures. 3. Direct Ground Mount Configuration – Having skids at the base of a pre-fabricated array that extend when the array is deployed, could be a successful design. This could be a useful strategy for dense, flat, ground-mount configurations like that employed by a couple of successful commercial operations (5G Maverick and Erthos). Arrays would be orientated north and south, deployed very low on prepared grade. Arrays would be aligned closely next to each other and anchored with small ground screws or simply with ballast. This same product arrangement could be very useful for rapid deployment and set-up of solar arrays for temporary deployments, disaster response and the military operations

14 SOLAR ENERGY↗

ISR Physics at BaBar

A method of measuring e{sup +}e{sup -} annihilation cross sections at low energy {radical}s < 5 GeV, using initial-state radiation, is described. Experimental data from the PEP-II B-factory at 10.6 GeV center-of-mass energy, obtained via ISR, are presented. The cross sections are measured for many processes e{sup +}e{sup -} {yields} 3{pi}, 4{pi}, 2K{pi}, 2K2{pi}, 4K, p{bar p}, {Lambda}{Lambda}, D{bar D}, ... . From the measured cross sections the parameters of known resonances are improved, the baryons form factors are derived and compared with theory predictions. New states, e.g; Y(4260) and Y(2175), for which the internal structure is not yet established, are observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗

Note: Effect of hot liner in producing {sup 40,48}Ca beam from RIKEN 18-GHz electron cyclotron resonance ion source

In order to produce a high-intensity and stable {sup 48}Ca beam from the RIKEN 18-GHz electron cyclotron resonance ion source, we have begun testing the production of a calcium beam using a micro-oven. To minimize the consumption rate of the material ({sup 48}Ca), we introduced the “hot liner” method and investigated the effect of the liner on the material consumption rate. The micro-oven was first used to produce the {sup 48}Ca beam for experiments in the RIKEN radioisotope beam factory, and a stable beam could be supplied for a long time with low consumption rate.

07 ISOTOPE AND RADIATION SOURCES↗

Atmospheric Mining in the Outer Solar System: Outer Planet Resource Processing, Moon Base Propulsion,and Vehicle Design Issues

Atmospheric mining in the outer solar system has been investigated as a means of fuel production for high energy propulsion and power. Fusion fuels such as Helium 3 (3He) and deuterium can be wrested from the atmospheres of Uranus and Neptune and either returned to Earth or used in-situ for energy production. Helium 3 and deuterium were the primary gases of interest with hydrogen being the primary propellant for nuclear thermal solid core and gas core rocket-based atmospheric flight. A series of analyses were undertaken to investigate resource capturing aspects of atmospheric mining in the outer solar system. This included the gas capturing rate, storage options, and different methods of direct use of the captured gases. While capturing 3He, large amounts of hydrogen and 4He are produced. Analyses of orbital transfer vehicles (OTVs), landers, and in-situ resource utilization (ISRU) mining factories are included. Preliminary observations are presented on near-optimal selections of moon base orbital locations, OTV power levels, and OTV and lander rendezvous points. Based on earlier propulsion investigations, the analyses of round trip OTV flights from Uranus and Neptune to their major moons with a 10- Megawatt electric (MWe) OTV power level and a 200 metric ton (MT) lander payload were selected. The OTV power level was based on delivering a relatively short OTV trip time and minimization of the number of lander flights. Moon base sites at Uranus and Neptune and the OTV requirements to support them will also be addressed. These analyses will include all of the major moons of Uranus and Neptune. In addition, the total masses and mass delivery schedules needed for atmospheric mining are presented.

nuclear propulsion↗

New Observables In the Decay Mode \bar B_d \-->\bar K^{0*} \ell^+ \ell^-

We discuss the large set of observables available from the angular distributions of the decay {bar B}{sub d} {yields} {bar K}*{sup 0}{ell}{sup +}{ell}{sup -}. We present a NLO analysis of all observables based on the QCD factorization approach in the low-dilepton mass region and an estimate of {Lambda}/m{sub b} corrections. Moreover, we discuss their sensitivity to new physics. We explore the experimental sensitivities at LHCb (10 fb{sup -1}) and SuperLHCb (100 fb{sup -1}) based on a full-angular fit method and explore the sensitivity to right handed currents. We also show that the previously discussed transversity amplitude A{sub T}{sup (1)} cannot be measured at the LHCb experiment or at future B factory experiments as it requires a measurement of the spin of the final state particles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Benzene Exposure Near the U.S. Permissible Limit Is Associated with Sperm Aneuploidy

Background: Benzene is a common industrial chemical known to induce leukemia and other blood disorders, as well as aneuploidy, in both human blood cells and sperm at exposures > 10 ppm. Recent reports have identified health effects at exposure levels < 1 ppm, the permissible exposure limit (PEL; 8 hr) set by the U.S. Occupational Safety and Health Administration. Objective: We investigated whether occupational exposures to benzene near 1 ppm induce aneuploidy in sperm. Methods: We used multicolor fluorescence in situ hybridization to measure the incidence of sperm with numerical abnormalities of chromosomes X, Y, and 21 among 33 benzene-exposed men and 33 unexposed men from Chinese factories. Individual exposures were assessed using personal air monitoring and urinary concentrations of benzene and trans,trans-muconic acid (E,E-MA). Air benzene concentrations were not detectable in unexposed men; in exposed men, concentrations ranged from below the detection limit to 24 ppm (median, 2.9 ppm), with 27% of exposed men (n = 9) having concentrations of ≤ 1 ppm. Exposed men were categorized into low and high groups based on urinary E,E-MA (median concentrations of 1.9 and 14.4 mg/L, respectively; median air benzene of 1 and 7.7 ppm, respectively), and aneuploidy frequencies were compared with those of unexposed men. Results: Sperm aneuploidy increased across low- and high-exposed groups for disomy X [incidence rate ratio (IRR) = 2.0; 95% confidence interval (CI), 1.1–3.4; and IRR = 2.8; 95% CI, 1.5–4.9, respectively], and for overall hyperhaploidy for the three chromosomes investigated (IRR = 1.6; 95% CI, 1.0–2.4; and IRR = 2.3; 95% CI, 1.5–3.6, respectively). We also found elevated disomy X and hyperhaploidy in the nine men exposed to ≤ 1 ppm benzene compared with unexposed men (IRR = 1.8; 95% CI, 1.1–3.0; and IRR = 2.0; 95% CI, 1.1–3.9, respectively). Conclusions: Benzene appeared to increase the frequencies of aneuploid sperm for chromosomes associated with chromosomal abnormality syndromes in human offspring, even in men whose air benzene exposure was at or below the U.S. permissible exposure limit.

59 BASIC BIOLOGICAL SCIENCES↗

Performance Analysis Tool for HPC and Big Data Applications on Scientific Clusters

Big data is prevalent in HPC computing. Many HPC projects rely on complex workflows to analyze terabytes or petabytes of data. These workflows often require running over thousands of CPU cores and performing simultaneous data accesses, data movements, and computation. It is challenging to analyze the performance involving terabytes or petabytes of workflow data or measurement data of the executions, from complex workflows over a large number of nodes and multiple parallel task executions. To help identify performance bottlenecks or debug the performance issues in large-scale scientific applications and scientific clusters, we have developed a performance analysis framework, using state-ofthe- art open-source big data processing tools. Our tool can ingest system logs and application performance measurements to extract key performance features, and apply the most sophisticated statistical tools and data mining methods on the performance data. It utilizes an efficient data processing engine to allow users to interactively analyze a large amount of different types of logs and measurements. To illustrate the functionality of the big data analysis framework, we conduct case studies on the workflows from an astronomy project known as the Palomar Transient Factory (PTF) and the job logs from the genome analysis scientific cluster. Our study processed many terabytes of system logs and application performance measurements collected on the HPC systems at NERSC. The implementation of our tool is generic enough to be used for analyzing the performance of other HPC systems and Big Data workows.

97 MATHEMATICS AND COMPUTING↗

Accelerating Optimal Integration of Energy Efficiency Strategies with Industrialized Modular Construction: Preprint

The National Renewable Energy Laboratory's (NREL's) Industrialized Construction Innovation team first introduced the Industrialized Construction Assessment Framework to achieve affordable, net-zero energy (NZE) modular multifamily buildings in the 2020 ACEEE paper "Integrating Energy Efficiency Strategies with Industrialized Construction for our Clean Energy Future." Since then, NREL has continued to drive the ambitious plan to accelerate optimal integration of energy efficiency strategies during industrialized construction with little or no additional cost, labor, and production time. This follow-on paper introduces the Energy in Modular (EMOD) buildings method and presents NREL's research efforts over the last two years in collaboration with industry, including affordable housing partners. NREL has developed an idealized NZE modular multifamily building design that incorporates five energy efficiency strategies well suited for industrialized construction in factories: (1) envelope thermal control, (2) envelope infiltration control, (3) mechanical, electrical, and plumbing systems, (4) smart controls, and (5) solar plus storage. This paper highlights results from leveraging design for manufacturing and assembly principles, testing, and validation pilots with factory partners; demonstrating pod prototypes in test stand at NREL; and performing simulations. Overall, these research efforts address barriers to whole-building system integration, such as poor installation quality of thermal and air barriers; lack of unitized systems for space conditioning, energy recovery and ventilation, and water heating; problematic on-site installation, commissioning, and configuration of controls; and lack of cost-effective integration for grid-friendly design and emerging technologies. Conclusively, the paper delineates next steps for future work with NREL's partners toward developing a transformational pathway for our clean energy future.

affordable housing↗

Uncertainty-informed selection of CMIP6 Earth System Model subsets for use in multisectoral and impact models

Earth system models (ESMs) and general circulation models (GCMs) are heavily used to provide inputs to sectoral impact and multisector dynamic models, which include representations of energy, water, land, economics, and their interactions. Therefore, representing the full range of model uncertainty, scenario uncertainty, and interannual variability that ensembles of these models capture is critical to the exploration of the future co-evolution of the integrated human–Earth system. The pre-eminent source of these ensembles has been the Coupled Model Intercomparison Project (CMIP). With more modeling centers participating in each new CMIP phase, the size of the model archive is rapidly increasing, which can be intractable for impact modelers to effectively utilize due to computational constraints and the challenges of analyzing large datasets. In this work, we present a method to select a subset of the latest phase, CMIP6, featuring models for use as inputs to a sectoral impact or multisector dynamics models, while prioritizing preservation of the range of model uncertainty, scenario uncertainty, and interannual variability in the full CMIP6 ensemble results. This method is intended to help impact modelers select climate information from the CMIP archive efficiently for use in downstream models that require global coverage of climate information. This is particularly critical for large-ensemble experiments of multisector dynamic models that may be varying additional features beyond climate inputs in a factorial design, thus putting constraints on the number of climate simulations that can be used. We focus on temperature and precipitation outputs of CMIP6 models, as these are two of the most used variables among impact models, and many other key input variables for impacts are at least correlated with one or both of temperature and precipitation (e.g., relative humidity). Besides preserving the multi-model ensemble variance characteristics, we prioritize selecting CMIP6 models in the subset that preserve the very likely distribution of equilibrium climate sensitivity values as assessed by the latest Intergovernmental Panel on Climate Change (IPCC) report. This approach could be applied to other output variables of climate models and, possibly when combined with emulators, offers a flexible framework for designing more efficient experiments on human-relevant climate impacts. It can also provide greater insight into the properties of existing CMIP6 models.

Snyder, Abigail C.↗