Space solar power systems
Studies were done on the feasibility of placing a solar power station called POwersat, in space. A general description of the engineering features are given as well as a brief discussion of the economic considerations.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Studies were done on the feasibility of placing a solar power station called POwersat, in space. A general description of the engineering features are given as well as a brief discussion of the economic considerations.
A major subsystem aboard the Shuttle Orbiter, the Remote Manipulator System (RMS) provides the capability to deploy and retrieve free-flying satellites, support attached payload operations, and aid in crewmember rescue from a disabled vehicle should the requirement arise. The Remote Manipulator System consists of 15.3-m (50 ft) articulated booms, end effectors, operator workstation, and closed circuit video, power and control subsystems. The manipulator booms (or arms) and end effectors are located in the Orbiter payload bay and operated from inside the cabin by one crewmember. This paper is primarily concerned with the design and development of the RMS operator's workstation, the man-machine engineering features and interfaces, and man-in-the-loop simulations and testing results obtained to date by the National Aeronautics and Space Administration (NASA).
This review was prepared in support of a geothermal planning activity of the County of Imperial. Engineering features of potential geothermal development are outlined. Acreage requirements for drilling and powerplants are estimated, as are the costs for wells, fluid transmission pipes, and generating stations. Rough scaling relationships are developed for cost factors as a function of reservoir temperature. Estimates are made for cooling water requirements, and possible sources of cooling water are discussed. Availability and suitability of agricultural wastewater for cooling are emphasized. The utility of geothermal resources for fresh water production in the Imperial Valley is considered.
A high temperature, low cycle fatigue life prediction method was developed. This method, Cyclic Damage Accumulation (CDA), was developed for use in predicting the crack initiation lifetime of gas turbine engine materials, where initiation was defined as a 0.030 inch surface length crack. A principal engineering feature of the CDA method is the minimum data base required for implementation. Model constants can be evaluated through a few simple specimen tests such as monotonic loading and rapic cycle fatigue. The method was expanded to account for the effects on creep-fatigue life of complex loadings such as thermomechanical fatigue, hold periods, waveshapes, mean stresses, multiaxiality, cumulative damage, coatings, and environmental attack. A significant data base was generated on the behavior of the cast nickel-base superalloy B1900+Hf, including hundreds of specimen tests under such loading conditions. This information is being used to refine and extend the CDA life prediction model, which is now nearing completion. The model is also being verified using additional specimen tests on wrought INCO 718, and the final version of the model is expected to be adaptable to most any high-temperature alloy. The model is currently available in the form of equations and related constants. A proposed contract addition will make the model available in the near future in the form of a computer code to potential users.
The requirements for dish-Stirling commercialization are described. The requirements for practical terrestrial power systems, both technical and economic, are described. Solar energy availability, with seasonal and regional variations, is discussed. The advantages and disadvantages of hybrid operation are listed. The two systems described use either a 25-kW free-piston Stirling hydraulic engine or a 5-kW kinematic Stirling engine. Both engines feature long-life characteristics that result from the use of welded metal bellows as hermetic seals between the working gas and the crankcase fluid. The advantages of the systems, the state of the technology, and the challenges that remain are discussed. Technology transfer between solar terrestrial Stirling applications and other Stirling applications is predicted to be important and synergistic.
Computer code, RTE, developed to perform three-dimensional thermal analyses of rocket thrust chambers. Calculates rate of heat transfer from combustion gases to coolant, coolant-temperature rise and pressure drop, and temperature profiles within cooling-jacket wall. Also calculates combustion-gas wall static pressure, temperature and enthalpy, as well as coolant pressure, temperature, and mach number for all stations. Program used for any propellant combination and most coolants commonly used in rockets. Code used for both regeneratively and radiatively cooled engines. However, in case of regeneratively cooled engines, applicability limited to engines featuring single-pass cooling and rectangular cooling channels.
There are major variations in energy flux within and across the region of a large city. These variations have impacts in disparate areas, such as human health, environmental monitoring and mitigation, and energy consumption. Knowledge of the variations also has utility to urban and regional planners, and climate modelers. The authors have developed a system which permits robust measurement of both the magnitude of the energy flux variation and the absolute value of energy flux over regions of the size of large cites. The technique uses properly acquired and processed multispectral imagery with bands in the visible, near-IR and thermal portions of the electromagnetic spectrum. With proper knowledge of the atmosphere and geometries of acquisition it is possible to compute the energy budget for individual pixels. The reality of this technique is demonstrated using data acquired over Salt Lake City, Utah. The deficiencies in the results emphasize the critical nature of various design and engineering features usually ignored in airborne and satellite imaging systems.
This brief presentation discusses developments in the design of the James Webb Space Telescope (JWST). The JWST master schedule is provided and its system architecture is described. Instruments include the Near Infrared Camaera, Near Infrared Spectrograph, Mid-Infrared Instrument, and the Fine Guidance Sensor. Compared to other telescopes the JWST has a 2.7 longer wavelength than the Hubble Telescope (HST), 38 times better sensitivity at K band that the HST NICMOS, and 8-24 times better angular resolution than the Spitzer Telescope. among other features. Engineering or verification models for all telescope instruments are being assembled and tested in the current year. Currently, good progress continues to be made on critical path items and the JWST is on track for a June 2013 launch.
Aggressive design goals have been set for future aero-propulsion systems with regards to fuel economy, noise, and emissions. To meet these challenging goals, advanced propulsion concepts are being explored and current operating margins are being re-evaluated to find additional concessions that can be made. One advanced propulsion concept being evaluated is a geared turbofan with a variable area fan nozzle (VAFN), developed by NASA. This engine features a small core, a fan driven by the low pressure turbine through a reduction gearbox, and a shape memory alloy (SMA)-actuated VAFN. The VAFN is designed to allow both a small exit area for efficient operation at cruise, while being able to open wider at high power conditions to reduce backpressure on the fan and ensure a safe level of stall margin is maintained. The VAFN is actuated via a SMA-based system instead of a conventional system to decrease overall weight of the system, however, SMA-based actuators respond relatively slowly, which introduces dynamic issues that are investigated in this work. This paper describes both a control system designed specifically for issues associated with SMAs, and dynamic analysis of the geared turbofan VAFN with the SMA actuators. Also, some future recommendations are provided for this type of propulsion system.
To evaluate new airframe technologies we need design tools based on high-fidelity models that consider multidisciplinary interactions early in the design process. The overarching goal of this NRA is to develop tools that enable high-fidelity multidisciplinary design optimization of aircraft configurations, and to apply these tools to the design of high aspect ratio flexible wings. We develop a geometry engine that is capable of quickly generating conventional and unconventional aircraft configurations including the internal structure. This geometry engine features adjoint derivative computation for efficient gradient-based optimization. We also added overset capability to a computational fluid dynamics solver, complete with an adjoint implementation and semiautomatic mesh generation. We also developed an approach to constraining buffet and started the development of an approach for constraining utter. On the applications side, we developed a new common high-fidelity model for aeroelastic studies of high aspect ratio wings. We performed optimal design trade-o s between fuel burn and aircraft weight for metal, conventional composite, and carbon nanotube composite wings. We also assessed a continuous morphing trailing edge technology applied to high aspect ratio wings. This research resulted in the publication of 26 manuscripts so far, and the developed methodologies were used in two other NRAs. 1
Deep Learning: A subfield of machine learning; Algorithms inspired by function of the brain; Scales with amount of training data; Powerful tool without the need for feature engineering; Suitable for Earth Science applications. Deep Learning for Earth science at MSFC (Marshall Space Flight Center): Phenomena identification; Hurricane intensity (wind speed) estimation; Severe storm (hailstorm) detection; Transverse bands detection; Entity extraction for knowledge graph creation; Ephemeral water detection.
This talk will cover the important steps involved in the data science and knowledge discovery process: • Initial fact gathering (interview domain experts, review reports, articles, state-of-the-art) • Identify the problem (prediction, classification, statistical analysis, etc.) • Survey supporting data sources • Understand the data (numerical, categorical, text, sampling rate, data quality issues, etc.) • Selecting relevant features and sources • Acquire the data (set up agreements with the data stewards, APIs to download, etc.) • Merge data sources (temporal, spatial, common key, other ontologies...) • Feature Engineering (non linear domain knowledge or physics-based relationships) • Build data processing pipeline (may need to tap into data stream, develop parallel processing algorithm, federated learning etc.) • Build model and test (tune hyper-parameters, cross validation.) • Analyze/Validate results (do the results make sense. Does it answer the original question). • Deploy/Publish (Monitor and assess benefits)
Understanding the human water footprint and its impact on the hydrological cycle is essential to inform water management under climate change. Despite efforts in estimating irrigation water withdrawals in earth system models, uncertainties and discrepancies exist within and across modeling systems conditioned by model structure, irrigation parameterization, and the choice of input datasets. Achieving model reliability could be much more challenging for data-sparse regions, given limited access to ground truth for parameterization and validation. Here, we demonstrate the potential of utilizing remotely sensed vegetation and soil moisture observations in constraining irrigation estimation in the Noah-MP land surface model. Results indicate that the two constraints together can effectively reduce model sensitivity to the choice of irrigation parameterization by 7%–43%. It also improves the characterization of the spatial patterns of irrigation and its impact on evapotranspiration and surface soil moisture by correcting for vegetation conditions and irrigation timing. This study highlights the importance of utilizing remotely sensed soil moisture and vegetation measurements in detecting irrigation signals and correcting for vegetation growth. Integrating the two remote sensing datasets into the model provides an effective and less feature engineered approach to constraining the uncertainty of irrigation modeling. Such strategies can be potentially transferred to other modeling systems and applied to regions across the globe.
An equitable and environmentally just community is essentialin order to avoid disproportionate burden borne by vulnerablecommunities. This need becomes pressing in the aftermathof an extreme event such as disaster or hazard when it is diffi-cult for the governing bodies to implement resource allocationas per the need. Artificial Intelligence (AI) algorithms canhelp surface Equity and Environmental Justice (EEJ) issueswhen trained on EEJ datasets. However, curating AI-readyEEJ training datasets is challenging due to differences in fac-tors such as heterogeneity, resolution, modality, and level ofexpertise in labeling. Additionally, EEJ issues involve sensi-tive information where uncertainties and errors could degradethe performance of AI algorithms. For eg. Error in seasonalcrop yield information can highly affect the prediction of an-nual crop yield. To address these challenges, Data-centricAI (DCAI) methods are employed, which enhance AI algo-rithm performance even with limited training samples. DCAIprioritizes data quality, thereby reducing the adverse effectsof uncertainties and errors during the model training process.This research proposes a novel dataset and benchmark for an-alyzing the effect of the Maui Wildfire of 2023 for Equityand Environmental Justice (EEJ) issues. The proposed datasetaligns with the concepts of DCAI such as annotation quality,data preprocessing, privacy, feature engineering, governanceand provenance. We firmly believe that the proposed datasetwould lay a foundation to implement robust and reliable mod-ern AI algorithms for addressing EEJ issues.
In this paper we present a technique to train neural network models on small amounts of data. Current methods for training neural networks on small amounts of rich data typically rely on strategies such as fine-tuning a pre-trained neural networks or the use of domain-specific hand-engineered features. Here we take the approach of treating network layers, or entire networks, as modules and combine pre-trained modules with untrained modules, to learn the shift in distributions between data sets. The central impact of using a modular approach comes from adding new representations to a network, as opposed to replacing representations via fine-tuning. Using this technique, we are able surpass results using standard fine-tuning transfer learning approaches, and we are also able to significantly increase performance over such approaches when using smaller amounts of data.
Automated analysis methods are crucial aids for monitoring and defending a network to protect the sensitive or confidential data it hosts. This work introduces a flexible, powerful, and unsupervised approach to detecting anomalous behavior in computer and network logs; one that largely eliminates domain-dependent feature engineering employed by existing methods. By treating system logs as threads of interleaved ``sentences'' (event log lines) to train online unsupervised neural network language models, our approach provides an adaptive model of normal network behavior. We compare the effectiveness of both standard and bidirectional recurrent neural network language models at detecting malicious activity within network log data. Extending these models, we introduce a tiered recurrent architecture, which provides context by modeling sequences of users' actions over time. Compared to isolation forests and Principal Components Analysis (PCA), two popular anomaly detection algorithms, we observe superior performance on the Los Alamos National Laboratory Cyber Security dataset. For log-line-level predictions, our best performing character-based model provides test set anomaly scores ranking red team events in the 98th percentile on average, and yields 0.97 area under the receiver operator characteristic curve, demonstrating the strong fine-grained anomaly detection performance of this approach on open vocabulary logging sources.
Embodiments disclosed herein provide methods and systems for delineating cell nuclei and classifying regions of histopathology or microanatomy while remaining invariant to batch effects. These systems and methods can include providing a plurality of reference images of histology sections. A first set of basis functions can then be determined from the reference images. Then, the histopathology or microanatomy of the histology sections can be classified by reference to the first set of basis functions, or reference to human engineered features. A second set of basis functions can then be calculated for delineating cell nuclei from the reference images and delineating the nuclear regions of the histology sections based on the second set of basis functions.
Autonomie Vehicle Information Database (VID) offers a comprehensive list of vehicle specifications since 1990. The database details more than 65,000 vehicles with hundreds of attributes. The database is the result of the development of a general automated data collection framework as well as the development of building blocks for processing, cleaning, integrating and analyzing complex data. The data has undergone several layers of outlier detections processes, machine learning based imputations methods have been used to deal with missing data problems, and new fields have been created according to the rules of feature engineering. Thanks to this streamlined data pipelines, the resulting processed aggregated data should deliver a unique level of information to the user in which the content can be efficiently maintained and updated.