Search NASA⌕ Search

SEARCH · Search NASA

Results for “gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Mean and fluctuating flow measurements in axisymmetric supersonic boundary layer flow subjected to distributed adverse pressure gradients

Measurements have been made of the mean flow properties and turbulent fluctuations in adiabatic turbulent boundary layer flows subjected to distributed adverse pressure gradients. In the freestream region upstream of the adverse pressure gradient the Mach number was 3.86, the unit Reynolds number 5.3 million per foot. The boundary layer developed on the wall of an axisymmetric nozzle and straight test section. In order to avoid the effects of streamwise surface curvature the adverse pressure gradients at the test section wall were induced by contoured centerbodies mounted on the wind tunnel centerline. The flow under study simulated that which might be found in an axially symmetric engine inlet of a supersonic aircraft.

Gootzait, E.↗

Stochastic estimates of gradient from laser measurements for an autonomous Martian Roving Vehicle

The general problem presented in this paper is one of estimating the state vector x from the state equation h = Ax, where h, A, and x are all stochastic. Specifically, the problem is for an autonomous Martian Roving Vehicle to utilize laser measurements in estimating the gradient of the terrain. Error exists due to two factors - surface roughness and instrumental measurements. The errors in slope depend on the standard deviations of these noise factors. Numerically, the error in gradient is expressed as a function of instrumental inaccuracies. Certain guidelines for the accuracy of permissable gradient must be set. It is found that present technology can meet these guidelines.-

Shen, C. N.↗

Effect of transverse velocity and temperature gradients on sound attenuation in two-dimensional ducts

An investigation is described of the effect of transverse mean-velocity and temperature gradients on sound attenuation in acoustically treated two-dimensional ducts. The results show that cooling the duct walls leads to channeling the sound toward the walls for both downstream and upstream propagation. The effect of mean-temperature gradients on the attenuation rates of the lowest three modes can be as important as the effect of mean-velocity gradients.

Nayfeh, A. H.↗

An experimental investigation of heat transfer to reusable surface insulation tile array gaps in a turbulent boundary layer with pressure gradient

An experimental investigation was performed to determine the effect of pressure gradient on the heat transfer to space shuttle reusable surface insulation (RSI) tile array gaps under thick, turbulent boundary layer conditions. Heat transfer and pressure measurements were obtained on a curved array of full-scale simulated RSI tiles in a tunnel wall boundary layer at a nominal freestream Mach number of 10.3 and freestream unit Reynolds numbers of 1.6, 3.3, and and 6.1 million per meter. Transverse pressure gradients were induced over the model surface by rotating the curved array with respect to the flow. Definition of the tunnel wall boundary layer flow was obtained by measurement of boundary layer pitot pressure profiles, and flat plate wall pressure and heat transfer. Flat plate wall heat transfer data were correlated and a method was derived for prediction of smooth, curved array heat transfer in the highly three-dimensional tunnel wall boundary layer flow and simulation of full-scale space shuttle vehicle pressure gradient levels was assessed.

Throckmorton, D. A.↗

Determination of the radial gradient in the region 0.81-1.0 AU using both high- and low-energy /more than 10-GeV and more than 52-MeV/ detectors for the 1-AU monitor

A determination of the radial gradient for alpha particles (31-46 MeV/nuc) and protons with energies above 7.5 MeV and 44-77 MeV in the region 1.0-0.81 AU is presented for the solar-quiet year 1966. The determinations are based on data from the Pioneer 6 space probe. Two different detectors are used: the Deep River neutron monitor and measurements of low energy protons made on the IMP-C satellite. The average energy response of the Deep River monitor is 16 GeV, whereas the IMP-C data is for protons with energies above 50 MeV. The resulting radial gradient is found to be nearly zero for the alpha particles and slightly negative for the protons. The same qualitative results were found using the IMP-C data and the Deep River neutron monitor to measure the temporal variation in the cosmic ray intensity. The present analysis indicates that detectors over a wide range of energies are suitable for measuring the radial gradient, providing sufficient statistical precision is obtained to evaluate short-term modulation and the azimuthal separation of the detectors is not great.

Sheldon, W. R.↗

Turbulence measurements in axisymmetric supersonic boundary layer flow in adverse pressure gradients

Measurements have been made of the mean-flow and turbulence properties in adiabatic turbulent boundary layer flows subjected to adverse pressure gradients. In the freestream region upstream of the adverse pressure gradient the Mach number was 3.86, the unit Reynolds number 5.3 million per foot. The boundary layer developed on the wall of an axisymmetric nozzle and straight test section. The pressure gradients at the test section wall were induced by contoured centerbodies mounted on the wind tunnel centerline. The flow under study simulated that which might be found in an axially symmetric engine inlet of a supersonic aircraft. The results obtained have shown good agreement to exist between the measured normalized turbulent velocity fluctuations and the results from other recent investigations of compressible boundary layers.

Gootzait, E.↗

The temperature gradient between 100 and 120 km

Oxygen density profiles inferred from Ogo 6 green nightglow emission vary too sharply between 100 and 120 km to be consistent with temperature gradients in standard model atmospheres, and the eddy diffusion coefficient K determined from these observations reaches its maximum below 115 km. For three atomic oxygen profiles obtained at geographic latitudes of -27.69, +48.89, and +59.10 the temperature profiles required to create a downward flux that varies with altitude as the integrated photolytic production rate above that altitude are calculated, assuming K to be invariant with altitude and latitude. The oxygen distribution can be reconciled with a constant eddy coefficient above 100 km if the temperature gradient reaches a value between 10 and 20 deg K/km for low values of the eddy coefficient (about 500,000 sq cm/sec) or between 30 and 50 deg K/km for a higher eddy coefficient (about 1.6 million sq cm/sec). The maximum gradient for the Jacchia (1971) model is about 10 deg K/km. These temperature profiles predict Ar/N ratios consistent with those measured by sounding rockets. The low K profiles are large enough to remove a large part of the solar energy deposited below 120 km by thermal conduction.

Donahue, T. M.↗

Effect of velocity gradients on measurements of turbulent shear stress

Experiments were carried out to evaluate the effects of normal velocity gradients on hot wire measurements in a subsonic boundary layer of the same size as the flow investigated by Johnson and Rose (1975). Both hot wire and film anemometers were used to measure the turbulent properties of the boundary layer. A special X-wire probe with one wire vertical and the other at an angle of about 40 deg to the flow was used to demonstrate the gradient effects. The results indicate that major errors are encountered when mean and turbulent velocity gradients exist along the length of hot wire sensors, the problem being more pronounced at high speeds. Although the split film sensor results show a significant improvement over the X-wire sensor, further reduction in the space resolution of sensors by roughly an order of magnitude would appear to be necessary to reduce the error to acceptable values near the wall.

Sandborn, V. A.↗

Evidence of a large-scale gradient in the solar wind velocity

Measurements of the solar wind velocity are compared at two widely separated locations, using plasma data obtained by Mariner 5, en route to Venus, and with the near-earth satellites Explorer 33, 34, and 35. A previous study of the propagation of interplanetary sector boundaries between Mariner and the earth had implied the existence of large scale velocity gradient which was interpreted as a latitude gradient of approximately 13 km/sec per degree of latitude. The results of the present investigation in which the earlier results were extended to the overall solar wind, without regard to the presence of sector boundaries, suggests that a latitude dependence of the solar wind velocity is the most plausible interpretation of the large-scale velocity gradient.

Rhodes, E. J., Jr.↗

A turbulence model for nonequilibrium adverse pressure gradient flows

This paper presents a method for calculating compressible adverse pressure gradient boundary layers by using an algebraic eddy viscosity turbulence model that has been modified for variable pressure gradient and turbulence memory effects. The pressure gradient corrections are based on previous incompressible data correlations. Several methods for including the effects of turbulence memory are evaluated. A new lag model, which gives good agreement with available experimental data, is developed. Finally, a correlation is developed for the lag length parameter employed in the model as a function of the known experimental flow variables.

Horstman, C. C.↗

Effects of a magnetic field gradient on the lower hybrid drift instability

The effect of a magnetic field gradient on the lower hybrid drift instability is examined in the low drift velocity regime (i.e., of the order of the ion thermal velocity). The theoretical model includes density and temperature gradients, and considers only waves propagating perpendicular to the ambient magnetic field with wavelengths of the order of the electron Larmor radius. It is found, for the case of a finite ratio of the electron pressure to the magnetic field pressure, that a magnetic gradient drift-wave resonance can be important and is stabilizing or destabilizing depending upon the physical conditions. Substantial plasma heating and a large anomalous resistivity can also occur.

Huba, J. D.↗

Influence of two-dimensional hygrothermal gradients on interlaminar stresses near free edges

Interlaminar stresses are determined for mechanical loading, uniform hygrothermal loading, and gradient moisture loading through implementation of a finite element computer code. Nonuniform two-dimensional hygroscopic gradients are obtained from a finite difference solution of the diffusion equation. It is shown that hygroscopic induced stresses can be larger than those resulting from mechanical and thermal loading, and that the distribution of the interlaminar normal stress may be changed significantly in the presence of a two-dimensional moisture gradient in the boundary layer of a composite laminate.

Farley, G. L.↗

Cosmic-ray gradients from Pioneer-10 and Pioneer-11

The paper reports Pioneer 10 and 11 observations of the variation with heliocentric distance of the intensity of cosmic-ray protons, alpha particles, and high-Z nuclei with kinetic energies of at least 480 MeV/nucleon as well as cosmic-ray electrons with energies exceeding 6 MeV. The observations were with three-channel Cerenkov counters at distances between 1.02 and 4.66 AU while the spacecraft traveled from earth to Jupiter. During the 4.5-month observation period, all the counting rates rose steadily, except when they were modified by solar events, Forbush decreases, and Jovian electron events. Two methods are employed to determine the cosmic-ray integral intensity gradient for the observation period from simultaneous data obtained by the two spacecraft; effects of solar particles, Forbush decreases, and Jovian electrons are eliminated in various ways. A radial gradient of 0.15 + or - 2.3% per AU is determined, which is considered to be consistent with zero. Theoretical gradients are computed, and the observed values are found to be an order of magnitude below the expected values. Several reasons for the discrepancy are suggested.

Axford, W. I.↗

Line-of-sight electron density gradients as deduced from an empirical ionospheric model

A topside ionospheric model (Bent Ionospheric Model) was developed for an accurate prediction of integrated total electron content (TEC), from a global data acquired for the years 1962 to 1969. In this paper the effects of line-of-sight electron density gradients on ground to satellite measurements are discussed. The results of analyses show that in the presence of increasing density gradients, deduced values of vertical electron content or slab thicknesses will be too large, while for decreasing gradients these values will be smaller than they should be.

Nesterczuk, G.↗

Light-dependent cation gradients and electrical potential in Halobacterium halobium cell envelope vesicles

Vesicles can be prepared from Halobacterium halobium cell envelopes, which contain properly oriented bacteriorhodopsin and which extrude H(+) during illumination. The pH difference that is generated across the membranes is accompanied by an electrical potential of 90 to 100 mV (interior negative) and the movements of other cations. Among these is the efflux of Na(+), which proceeds against its electrochemical potential. The relationship between the size and direction of the light-induced pH gradient and the rate of depletion of Na(+) from the vesicles, as well as other evidence, suggest that the active Na(+) extrusion is facilitated by a membrane component that exchanges H(+) for Na(+) with a stoichiometry greater than 1. The gradients of H(+) and Na(+) are thus coupled to one another. The Na(+) gradient (efflux much larger than influx), which arises during illumination, plays a major role in energizing the active transport of amino acids.

Lanyi, J. K.↗

An experimental documentation of pressure gradient and Reynolds number effects on compressible turbulent boundary layers

Attached supersonic turbulent boundary layers, with a wide range of adverse pressure gradient strengths, are investigated for Reynolds numbers from 11.7 x 1 million to 314 x 1 million. Surface pressure and surface shear measurements were obtained for six flow fields over the entire Reynolds number range. In addition, two flow fields - one with a moderate pressure gradient and the other with a severe pressure gradient - are thoroughly documented at a single Reynolds number. This experimental documentation includes both mean and fluctuating profiles throughout the flow field, and is sufficient to define the complete flow field, including the upstream undisturbed flow region.

Kussoy, M. I.↗

Arc-jet test and analysis of Orbiter TPS inter-tile heating in high pressure gradient flow

During entry of the Space Shuttle Orbiter, the convective heating within inter-tile gaps of the Thermal Protection System (TPS) material produces elevated tile sidewall temperatures in regions of high surface pressure gradient. Arc-jet tests have been conducted recently to obtain a measure of the gap heating down the TPS tile sidewalls at test conditions representative of Orbiter flight environments. The object of this paper is to present the gap heating correlations that were developed from a thermal analysis for 3-D curved and flat TPS tile segments. Predictions of gap sidewall temperature were obtained within 30 F of test data on both Wing Glove and Double Wedge models. Derived heating ratios were obtained for a range of test conditions (pressure, pressure gradient, enthalpy, boundary layer thickness, gap width, surface temperature, etc.). The results of the study, which showed that heating ratios varied with the pressure gradient times the square root of the surface pressure, are being used to provide an assessment of gap filler requirements on Orbiter forward fuselage/chine and wing glove regions.

Rochelle, W. C.↗

Influence of two-dimensional hygrothermal gradients on interlaminar stresses near free edges

Interlaminar stresses are determined for mechanical loading, uniform hygrothermal loading, and gradient moisture loading through implementation of a finite-element computer code. Nonuniform two-dimensional hygroscopic gradients are obtained from a finite-difference solution of the diffusion equation. It is shown that hygroscopic-induced stresses can be larger than those resulting from mechanical and thermal loading, and that the distribution of the interlaminar normal stress may be changed significantly in the presence of a two-dimensional moisture gradient in the boundary layer of a composite laminate.

Farley, G. L.↗