Search NASA⌕ Search

SEARCH · Search NASA

Results for “helicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Experimental and predicted cavitation performance of an 80.6 deg helical inducer in high temperature water

The cavitating performance of a stainless steel 80.6 degree flat-plate helical inducer was investigated in water over a range of liquid temperatures and flow coefficients. A semi-empirical prediction method was used to compare predicted values of required net positive suction head in water with experimental values obtained in water. Good agreement was obtained between predicted and experimental data in water. The required net positive suction head in water decreased with increasing temperature and increased with flow coefficient, similar to that observed for a like inducer in liquid hydrogen.

Kovich, G.↗
NASA NTRS1972

Turbulent boundary layer on a rotating helical blade.

Investigation of the boundary-layer characteristics on a helical blade of large chord length, enclosed in an annulus and rotating in a fluid otherwise at rest. The three-dimensional form of momentum integral equations is derived, and is used to predict the boundary-layer growth and limiting streamline angles on the blade surface. The measurements are in general agreement with the predictions. The wall shear stress correlation, which includes both Reynolds number and rotation parameters, valid for a rotating blade operating at zero pressure gradient, is derived. Radial and tangential velocity profiles, the tangential component of turbulence intensity, and blade static pressures are measured at several locations on the blade surface. The nature of flow near the blade tip is discussed. An expression for the radial velocity profile, valid in the outer region of the boundary layer, is derived theoretically.

Lakshminarayana, B.↗
NASA NTRS1974

Three-dimensional turbulent boundary layer in a rotating helical channel

Analytical and experimental investigation of the characteristics of a three-dimensional turbulent boundary layer in a rotating helical channel. Expressions are developed for the velocity profiles in the inner layer, where viscous effects dominate, and the outer layer, where viscous effects are small. The velocity profiles, wall shear stress, and limiting streamline angles are measured inside the passages of a flat-plate inducer at various radial and chordwise locations using rotating probes. Flow near the blade tip is found to be highly complex, due to interaction of blade boundary layers and annulus wall, resulting in appreciable radial inward flow, as well as a defect in mainstream velocity near the mid-passage. A wall shear stress correlation, which includes the effect of both Reynolds number and rotation parameter, is derived from the measured data.

Anand, A. K.↗
NASA NTRS1975

Life analysis of helical gear sets using Lundberg-Palmgren theory

A mathematical model is developed for surface fatigue life of helical gears. The expected fatigue life of a pinion, gear, or gear set may be calculated from the model. An equation for the dynamic capacity of a gear set was also derived. Dynamic capacity is the transmitted tangential load which gives a 90 percent probability of survival of the gear set for one million pinion revolutions. The equations, when simplified by setting the helix angle to zero, reduce to the results which were previously developed for spur gears. A sample calculation is given which illustrates the use of the new fatigue life model.

Coy, J. J.↗
NASA NTRS1975

Automatic guidance and control of a transport aircraft during a helical landing approach

A linear optimal regulator theory was applied to a nonlinear simulation of a transport aircraft performing a helical landing approach. A closed-form expression for the quasi-steady nominal flight path is presented along with the method for determining the corresponding constant nominal control inputs. The Jacobian matrices and the weighting matrices in the cost functional were time varying. A method of solving for the optimal feedback gains is reviewed. The control system was tested on several alternative landing approaches using both 3 deg and 6 deg flight path angles. On each landing approach, the aircraft was subjected to large random initial-state errors and to randomly directed crosswinds. The system was also tested for sensitivity to changes in the parameters of the aircraft and of the atmosphere. Results indicate that performance of the optimal controller on all the 3 deg approaches is very good. The control system proved to be reasonably insensitive to parametric uncertainties. Performance is not as good on the 6 deg approaches. A modification to the 6 deg flight path was proposed for the purpose of improving performance.

Crawford, D. J.↗
NASA NTRS1976

Radiation of whistlers by helical electron and proton beams

The feasibility of generating whistlers by means of an array of helical electron and proton beams is investigated. It is found that quasi-static beam-plasma instabilities will play a vital role in limiting the effective coherent length of the beam. The total radiated power for the whistlers is consequently decreased by 2 orders of magnitude below previously predicted levels (Dowden, 1973). A proton beam is shown to be somewhat less efficient than an electron beam for generating whistlers.

Kuo, Y.-Y.↗
NASA NTRS1977

The helical screw expander evaluation project

A positive-displacement helical-screw expander of the Lysholm type has been adapted for geothermal service and successfully demonstrated in a 50 kW prototype power system. Evaluation of the expander by tests of a new model in a 1 MW power system under wellhead conditions in selected liquid-dominated geothermal fields is proposed. The objectives are to determine the performance characteristics of the expander and power system over a broad range of operating conditions and also to examine the concept of wellhead power plants. Throttling and fractionation of the fluids from the test wells is planned to simulate a wide range of wellhead pressures and steam fractions. Variation in the expander exhaust pressure is also planned. The investigation will include expander efficiency, corrosion, erosion, scale formation and control, and endurance testing. Interaction studies with the wells and an electric grid are also proposed.

Mckay, R. A.↗