Search NASA⌕ Search

SEARCH · Search NASA

Results for “high level application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Shear horizontal surface acoustic wave microsensor for Class A viral and bacterial detection.

The rapid autonomous detection of pathogenic microorganisms and bioagents by field deployable platforms is critical to human health and safety. To achieve a high level of sensitivity for fluidic detection applications, we have developed a 330 MHz Love wave acoustic biosensor on 36{sup o} YX Lithium Tantalate (LTO). Each die has four delay-line detection channels, permitting simultaneous measurement of multiple analytes or for parallel detection of single analyte containing samples. Crucial to our biosensor was the development of a transducer that excites the shear horizontal (SH) mode, through optimization of the transducer, minimizing propagation losses and reducing undesirable modes. Detection was achieved by comparing the reference phase of an input signal to the phase shift from the biosensor using an integrated electronic multi-readout system connected to a laptop computer or PDA. The Love wave acoustic arrays were centered at 330 MHz, shifting to 325-328 MHz after application of the silicon dioxide waveguides. The insertion loss was -6 dB with an out-of-band rejection of 35 dB. The amplitude and phase ripple were 2.5 dB p-p and 2-3{sup o} p-p, respectively. Time-domain gating confirmed propagation of the SH mode while showing suppression of the triple transit. Antigen capture and mass detection experiments demonstrate a sensitivity of 7.19 {+-} 0.74{sup o} mm{sup 2}/ng with a detection limit of 6.7 {+-} 0.40 pg/mm{sup 2} for each channel.

60 APPLIED LIFE SCIENCES↗

Transformational Sorbent Materials for a Substantial Reduction in the Energy Requirement for Direct Air Capture of CO 2

InnoSepra’s project, “Transformational Sorbent Materials for a Substantial Reduction in the Energy Requirement for Direct Air Capture of CO 2 ,” utilized computational tools, materials characterization, and lab scale testing to optimize previously identified materials to determine their performance under direct air capture conditions. InnoSepra utilized the test results to determine the energy required for regeneration and to develop a high-level process design/analysis to demonstrate the application of developed materials for direct air capture which could be utilized for future techno-economic and life-cycle analyses to fully assess the potential of the materials for direct air capture. InnoSepra also updated the State Point Data Table and completed the environmental, health, and safety (EH&S) Risk Assessment.

99 GENERAL AND MISCELLANEOUS↗

Nuclear Data: From Measurement, Evaluation, Processing to Practical Applications [Slides]

Any analysis, design of a nuclear system will be as good as the knowledge of the nuclear data used whether differential and integral. ORNL is engaged in generating high level nuclear data for reactor, shielding, and safety applications. Nuclear data remains a major source of data uncertainties. Uncertainties on nuclear data rely upon measurements and evaluations. Tight connections with experimental facilities around the world have helped ORNL to address issues on ND and uncertainty. It is extremely important for ORNL to retain expertise on nuclear data in support of the research and expertise activities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Immunological Approaches to Biomass Characterization and Utilization

Plant biomass is the major renewable feedstock resource for sustainable generation of alternative transportation fuels to replace fossil carbon-derived fuels. Lignocellulosic cell walls are the principal component of plant biomass. Hence, a detailed understanding of plant cell wall structure and biosynthesis is an important aspect of bioenergy research. Cell walls are dynamic in their composition and structure, varying considerably among different organs, cells, and developmental stages of plants. Hence, tools are needed that are highly efficient and broadly applicable at various levels of plant biomass-based bioenergy research. The use of plant cell wall glycan-directed probes has seen increasing use over the past decade as an excellent approach for the detailed characterization of cell walls. Large collections of such probes directed against most major cell wall glycans are currently available worldwide. The largest and most diverse set of such probes consists of cell wall glycan-directed monoclonal antibodies (McAbs). These McAbs can be used as immunological probes to comprehensively monitor the overall presence, extractability, and distribution patterns among cell types of most major cell wall glycan epitopes using two mutually complementary immunological approaches, glycome profiling (an in vitro platform) and immunolocalization (an in situ platform). Significant progress has been made recently in the overall understanding of plant biomass structure, composition, and modifications with the application of these immunological approaches. This review focuses on such advances made in plant biomass analyses across diverse areas of bioenergy research.

59 BASIC BIOLOGICAL SCIENCES↗

Introducing the target-matrix paradigm for mesh optimization via node-movement.

A general-purpose algorithm for mesh optimization via node movement, known as the Target-Matrix Paradigm, is introduced. The algorithm is general purpose in that it can be applied to a wide variety of mesh and element types, and to various commonly recurring mesh optimization problems such as shape improvement, and to more unusual problems like boundary-layer preservation with sliver removal, high-order mesh improvement, and edge-length equalization. The algorithm can be considered to be a direct optimization method in which weights are automatically constructed to enable definitions of application-specific mesh quality. The high-level concepts of the paradigm have been implemented in the Mesquite mesh-improvement library, along with a number of concrete algorithms that address mesh quality issues such as those shown in the examples of the present paper.

99 GENERAL AND MISCELLANEOUS↗

Electronic and Optical Properties of NV Center in Diamonds for Sensing Applications: Experimental and First Principles Density Functional Theory Approach

The nitrogen-vacancy (NV) center in a nanodiamond (ND) crystal is one of the best candidate materials for quantum sensing and metrology applications at elevated environmental conditions. The NV center can be used to achieve an unprecedented level of sensitivity for sensing applications at high temperatures and pressures. The NV center is also proven to be useful for magnetic field sensing. Furthermore, it can be used for applications in the sensing of valuable minerals such as rare earth elements (REEs) from the crude and waste subsurface materials. This work presents computational and experimental studies on electronic and optical properties of bulk diamond with N and NV defects. ND in MOF/polymer materials will be experimentally encapsulated. The transverse spin relaxation time of the NV center will be measured in bare and encapsulated ND. Different doping elements will be introduced on the surfaces and present surface electronic properties to study the surfaces with shallow NV center for quantum sensing applications.

Paudel, Hari P.↗

CEMENTITIOUS BARRIERS PARTNERSHIP ACCOMPLISHMENTS AND RELEVANCE TO THE DOE COMPLEX

The Cementitious Barriers Partnership (CBP) was initiated to reduce risk and uncertainties in the performance assessments that directly impact U.S. Department of Energy (DOE) environmental cleanup and closure programs. The CBP is supported by the DOE Office of Environmental Management (DOE-EM) and has been specifically addressing the following critical EM program needs: (i) the long-term performance of cementitious barriers and materials in nuclear waste disposal facilities and (ii) increased understanding of contaminant transport behavior within cementitious barrier systems to support the development and deployment of adequate closure technologies. To accomplish this, the CBP has two initiatives: (1) an experimental initiative to increase understanding of changes in cementitious materials over long times (> 1000 years) over changing conditions and (2) a modeling initiative to enhance and integrate a set of computational tools validated by laboratory and field experimental data to improve understanding and prediction of the long-term performance of cementitious barriers and waste forms used in nuclear applications. In FY10, the CBP developed the initial phase of an integrated modeling tool that would serve as a screening tool which could help in making decisions concerning disposal and tank closure. The CBP experimental programs are underway to validate this tool and provide increased understanding of how CM changes over time and under changing conditions. These initial CBP products that will eventually be enhanced are anticipated to reduce the uncertainties of current methodologies for assessing cementitious barrier performance and increase the consistency and transparency of the DOE assessment process. These tools have application to low activity waste forms, high level waste tank closure, D&D and entombment of major nuclear facilities, landfill waste acceptance criteria, and in-situ grouting and immobilization of vadose zone contamination. This paper summarizes the recent work provided by the CBP to support DOE operations and regulatory compliance and the accomplishments over the past 2 years. Impacts of this work include: (1) a forum for DOE-NRC technical exchange, (2) material characterization to support PA predictions, (3) reducing uncertainty in PA predictions, (4) establishing base case performance to improve PA predictions, and (5) improving understanding and quantification of moisture and contaminant transport used in PAs. Additional CBP accomplishments include: sponsorship of a national test bed workshop to obtain collaboration in establishing the path forward in obtaining actual data to support future predictions on cementitious barrier performance evaluations, and participation in an International Atomic Energy Agency (IAEA) Cooperative Research Project on the use of cementitious barriers for low-level radioactive waste treatment and disposal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Programming Framework for Scientific Applications on CPU-GPU Systems

At a high level, my research interests center around designing, programming, and evaluating computer systems that use new approaches to solve interesting problems. The rapid change of technology allows a variety of different architectural approaches to computationally difficult problems, and a constantly shifting set of constraints and trends makes the solutions to these problems both challenging and interesting. One of the most important recent trends in computing has been a move to commodity parallel architectures. This sea change is motivated by the industry’s inability to continue to profitably increase performance on a single processor and instead to move to multiple parallel processors. In the period of review, my most significant work has been leading a research group looking at the use of the graphics processing unit (GPU) as a general-purpose processor. GPUs can potentially deliver superior performance on a broad range of problems than their CPU counterparts, but effectively mapping complex applications to a parallel programming model with an emerging programming environment is a significant and important research problem.

99 GENERAL AND MISCELLANEOUS↗

Polarization operator of a photon in a magnetic field

The polarization operator of a photon in a static uniform magnetic field has been studied at photon energies both above and below the threshold of electron–positron pair production by a photon. In the first order of the fine-structure constant α, expressions for the refractive index of a photon with a certain polarization in both low and high fields as compared to the critical field H{sub 0} = 4.41 × 10{sup 13} G have been obtained. Both the purely quantum range of photon energies, where the particles of a pair are produced at the lowest Landau levels, and the region of applicability of the semiclassical approximation in the case of the population of high energy levels have been considered. A general spectral integral formula has been obtained with divergent threshold terms separated in an explicit form.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Stellar decomposition: A compact representation for simplicial complexes and beyond

Here, we introduce the Stellar decomposition, a model for efficient topological data structures over a broad range of simplicial and cell complexes. A Stellar decomposition of a complex is a collection of regions indexing the complex’s vertices and cells such that each region has sufficient information to locally reconstruct the star of its vertices, i.e., the cells incident in the region’s vertices. Stellar decompositions are general in that they can compactly represent and efficiently traverse arbitrary complexes with a manifold or non-manifold domain. They are scalable to complexes in high dimension and of large size, and they enable users to easily construct tailored application-dependent data structures using a fraction of the memory required by a corresponding global topological data structure on the complex. As a concrete realization of this model for spatially embedded complexes, we introduce the Stellar tree, which combines a nested spatial tree with a simple tuning parameter to control the number of vertices in a region. Stellar trees exploit the complex’s spatial locality by reordering vertex and cell indices according to the spatial decomposition and by compressing sequential ranges of indices. Stellar trees are competitive with state-of-the-art topological data structures for manifold simplicial complexes and offer significant improvements for cell complexes and non-manifold simplicial complexes. We conclude with a high-level description of several mesh processing and analysis applications that utilize Stellar trees to process large datasets.

97 MATHEMATICS AND COMPUTING↗

Swelling resistance of advanced austenitic alloy A709 and its comparison with 316 stainless steel at high damage levels

Alloy A709 is an austenitic alloy developed for power boiler applications in thermal power plants and is being considered as a candidate structural material for Generation IV reactors and fusion reactors, based especially on its increased creep strength over Type 316 stainless steel. However, improved thermal creep properties would not necessarily imply improved radiation resistance, especially with respect to void swelling. Since there are currently no neutron irradiation data on A709 to high fluences, A709 and cold-worked 316 were irradiated in the present study under identical conditions to doses between 100 and 400 peak dpa using irradiation by 3.5 MeV Fe +2 ions. The swelling behavior of 316 is well-known for both neutron and ion irradiation, thus the relative swelling behavior of A709 and 316 under ion irradiation might provide an indication of the swelling behavior of A709 in neutron irradiation environment. Swelling of A709 under ion irradiation was observed over the range of 500-600 ⁰C, peaking at 575 ⁰C. Both A709 and 316 eventually swelled at a rate of ~1 %/dpa under ion irradiation at 575 ⁰C, consistent with the swelling of 316 observed during neutron irradiation. But A709 had a significantly longer transient regime than 316 at any given dpa rate, demonstrating enhanced swelling resistance of A709 over 316 under self-ion irradiation. The swelling levels reached at 400 peak dpa were 55% and 90% for A709 and 316, respectively. The assigned local dpa levels were adjusted both temporally and spatially at each dose for swelling-induced increases in the ion range and concomitant decreases in density. The duration of the transient regimes in each alloy was also observed to increase as the local dpa rate increased, an observation also consistent with neutron irradiation behavior of 316 stainless steel.

36 MATERIALS SCIENCE↗

Damsel: A Data Model Storage Library for Exascale Science

Computational science applications have been described as having one of seven motifs (the “seven dwarfs”), each having a particular pattern of computation and communication. From a storage and I/O perspective, these applications can also be grouped into a number of data model motifs describing the way data is organized and accessed during simulation, analysis, and visualization. Major storage data models developed in the 1990s, such as Network Common Data Format (netCDF) and Hierarchical Data Format (HDF) projects, created support for more complex data models. Development of both netCDF and HDF5 was influenced by multi-dimensional dataset storage requirements, but their access models and formats were designed with sequential storage in mind (e.g., a POSIX I/O model). Although these and other high-level I/O libraries have had a beneficial impact on large parallel applications, they do not always attain a high percentage of peak I/O performance due to fundamental design limitations, and they do not address the full range of current and future computational science data models. The goal of this project is to enable exascale computational science applications to interact conveniently and efficiently with storage through abstractions that match their data models. The project consists of three major activities: (1) identifying major data model motifs in computational science applications and developing representative benchmarks; (2) developing a data model storage library, called Damsel, that supports these motifs, provides efficient storage data layouts, incorporates optimizations to enable exascale operation, and is tolerant to failures; and (3) productizing Damsel and working with computational scientists to encourage adoption of this library by the scientific community. The product of this project, Damsel library, is openly available for download from http://cucis.ece.northwestern.edu/projects/DAMSEL. Several case studies and application programming interface reference are also available to assist new users to learn to use the library.

97 MATHEMATICS AND COMPUTING↗

Energy storage for the electricity grid : benefits and market potential assessment guide : a study for the DOE Energy Storage Systems Program.

This guide describes a high-level, technology-neutral framework for assessing potential benefits from and economic market potential for energy storage used for electric-utility-related applications. The overarching theme addressed is the concept of combining applications/benefits into attractive value propositions that include use of energy storage, possibly including distributed and/or modular systems. Other topics addressed include: high-level estimates of application-specific lifecycle benefit (10 years) in $/kW and maximum market potential (10 years) in MW. Combined, these criteria indicate the economic potential (in $Millions) for a given energy storage application/benefit. The benefits and value propositions characterized provide an important indication of storage system cost targets for system and subsystem developers, vendors, and prospective users. Maximum market potential estimates provide developers, vendors, and energy policymakers with an indication of the upper bound of the potential demand for storage. The combination of the value of an individual benefit (in $/kW) and the corresponding maximum market potential estimate (in MW) indicates the possible impact that storage could have on the U.S. economy. The intended audience for this document includes persons or organizations needing a framework for making first-cut or high-level estimates of benefits for a specific storage project and/or those seeking a high-level estimate of viable price points and/or maximum market potential for their products. Thus, the intended audience includes: electric utility planners, electricity end users, non-utility electric energy and electric services providers, electric utility regulators and policymakers, intermittent renewables advocates and developers, Smart Grid advocates and developers, storage technology and project developers, and energy storage advocates.

25 ENERGY STORAGE↗

A survey of software implementations used by application codes in the Exascale Computing Project

The US Department of Energy Office of Science and the National Nuclear Security Administration initiated the Exascale Computing Project (ECP) in 2016 to prepare mission-relevant applications and scientific software for the delivery of the exascale computers starting in 2023. The ECP currently supports 24 efforts directed at specific applications and six supporting co-design projects. These 24 application projects contain 62 application codes that are implemented in three high-level languages—C, C++, and Fortran—and use 22 combinations of graphical processing unit programming models. The most common implementation language is C++, which is used in 53 different application codes. The most common programming models across ECP applications are CUDA and Kokkos, which are employed in 15 and 14 applications, respectively. This article provides a survey of the programming languages and models used in the ECP applications codebase that will be used to achieve performance on the future exascale hardware platforms.

97 MATHEMATICS AND COMPUTING↗

ORCHA: A performance portability system for extreme heterogeneity

Heterogeneity is the prevalent trend in the rapidly evolving high-performance computing (HPC) landscape in both hardware and application software. The diversity in hardware platforms, currently comprising various accelerators and a future possibility of specializable chiplets, poses a significant challenge for scientific software developers aiming to harness optimal performance across different computing platforms while maintaining the quality of solutions when their applications are simultaneously growing more complex. Code synthesis and code generation can provide mechanisms to mitigate this challenge. We have developed a divide and conquer approach where different aspects of performance are handled by different stand-alone tools that are interfaced with the application through generated code. This portability system, ORCHA, enables users to configure and orchestrate their computations among available resources on a platform by specifying a high-level recipe, thereby permitting a many-to-many paradigm where each recipe results in a different variant of the application. The core design goal is to let users decide the application’s hardware mapping and orchestration by editing only the high-level recipe—without modifying the maintained source code or binding the application to a particular runtime system. Tools in ORCHA distribution are: CG-Kit for translating the recipe into an execution graph; Milhoja to execute the graph by orchestrating data and task movement among hardware resources; and Macroprocessor that enables users to define their own code-shorthand for higher composability and easier management of code variants. Additionally, the design of ORCHA permits tools to work in a plug-and-play mode where the application can build and run without CG-Kit and Milhoja, and either tool can be swapped out for other tools with similar capabilities by modifying the code generation portion of ORCHA. In this paper, we describe the design of ORCHA and the role that code-generation plays in isolating applications from tools. We demonstrate the breadth of configurations ORCHA enables with a case study in which an application configuration is realized on three distinct hardware mappings—a GPU-centric, a CPU/GPU balanced, and a CPU/GPU concurrent layouts by using different recipes.

Lee, Youngjun↗

3-D MAPPING TECHNOLOGIES FOR HIGH LEVEL WASTE TANKS

This research investigated four techniques that could be applicable for mapping of solids remaining in radioactive waste tanks at the Savannah River Site: stereo vision, LIDAR, flash LIDAR, and Structure from Motion (SfM). Stereo vision is the least appropriate technique for the solids mapping application. Although the equipment cost is low and repackaging would be fairly simple, the algorithms to create a 3D image from stereo vision would require significant further development and may not even be applicable since stereo vision works by finding disparity in feature point locations from the images taken by the cameras. When minimal variation in visual texture exists for an area of interest, it becomes difficult for the software to detect correspondences for that object. SfM appears to be appropriate for solids mapping in waste tanks. However, equipment development would be required for positioning and movement of the camera in the tank space to enable capturing a sequence of images of the scene. Since SfM requires the identification of distinctive features and associates those features to their corresponding instantiations in the other image frames, mockup testing would be required to determine the applicability of SfM technology for mapping of waste in tanks. There may be too few features to track between image frame sequences to employ the SfM technology since uniform appearance may exist when viewing the remaining solids in the interior of the waste tanks. Although scanning LIDAR appears to be an adequate solution, the expense of the equipment ($80,000-$120,000) and the need for further development to allow tank deployment may prohibit utilizing this technology. The development would include repackaging of equipment to permit deployment through the 4-inch access ports and to keep the equipment relatively uncontaminated to allow use in additional tanks. 3D flash LIDAR has a number of advantages over stereo vision, scanning LIDAR, and SfM, including full frame time-of-flight data (3D image) collected with a single laser pulse, high frame rates, direct calculation of range, blur-free images without motion distortion, no need for precision scanning mechanisms, ability to combine 3D flash LIDAR with 2D cameras for 2D texture over 3D depth, and no moving parts. The major disadvantage of the 3D flash LIDAR camera is the cost of approximately $150,000, not including the software development time and repackaging of the camera for deployment in the waste tanks.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Design methodologies and engineering applications for ecosystem biomimicry: an interdisciplinary review spanning cyber, physical, and cyber-physical systems

Abstract Ecosystem biomimicry is a promising pathway for sustainable development. However, while typical form- and process-level biomimicry is prevalent, system-level ecosystem biomimicry remains a nascent practice in numerous engineering fields. This critical review takes an interdisciplinary approach to synthesize trends across case studies, evaluate design methodologies, and identify future opportunities when applying ecosystem biomimicry to engineering practices, including cyber systems (CS), physical systems (PS), and cyber-physical systems (CPS). After systematically sourcing publications from major databases, the papers were first analyzed at a meta level for their bibliographic context and for statistical correlations among categorical variables. Then, we investigated deeper into the engineering applications and design methodologies. Results indicate that CPS most frequently mimic organisms and ecosystems, while CS and PS frequently mimic populations-communities and molecules-tissues-organ systems, respectively (statistically highly significant). An indirect approach is most often used for mimicry at organizational levels from populations to ecosystems, while a direct approach frequently suits levels from molecules to organisms (highly significant). Dominant themes across engineering applications include symbiotic organism search algorithms for CS and ecological network analysis for CPS, while PS are highly diverse. For design methodologies, this work summarizes and details ten well-documented biomimetic process models among literature, which addresses an outdated concern for a lack of systematic methods for ecosystem biomimicry. In addition to the Biomimetics Standard ISO 18458, these methods include the Natural Step and Techno-Ecological Synergy framework, among others. Further, the analyses revealed future opportunities from less utilized design methods (e.g. interdisciplinary teams tackling indirect, ecosystem-level projects) to well-established engineering concepts ready for technological advancement (e.g. implementing membrane computing for physical applications). For future studies, this review provides a comprehensive reference for ecosystem biomimetic design practices and application opportunities across multiple engineering domains.

42 ENGINEERING↗

Design and Implementation of a High-Performance CCA Event Service

Event services based on publish-subscribe architectures are well established components of distributed computing applications. Recently, an event service has been proposed as part of the Common Component Architecture (CCA) for high-performance computing applications. In this paper we describe our implementation, experimental evaluation, and initial experience with a high performance CCA event service that exploits efficient communications mechanisms commonly used on high-performance computing (HPC) platforms. We describe the CCA event service model, and discuss briefly the possible implementation strategies of that model. We then present the design and implementation of the event service using the Aggregate Remote Memory Copy Interface (ARMCI) as an underlying communication layer for this mechanism. Two alternative implementations are presented and evaluated on a Cray XD-1 platform. The performance results demonstrate that event delivery latencies are low and that the event service is able to achieve high throughput levels. Finally, we describe the use of the event service in an application for high-speed processing of data from a mass spectrometer, and conclude by discussing some possible extensions to the event service for other HPC applications.

97 MATHEMATICS AND COMPUTING↗