Search NASA⌕ Search

SEARCH · Search NASA

Results for “hourly weather data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Virtual storage capability of residential buildings for sustainable smart city via model-based predictive control

This paper evaluates the virtual storage capability of a residential air-conditioning (AC) system by utilizing the building mass as a thermal storage to enable sustainable cities through model-based predictive control (MPC). The control-oriented building model was developed with a grey-box model structure based on the experimental data to predict the indoor air temperature. Based on the model, the operation cost-saving potential of the MPC was investigated in a single house with different comfort levels, electricity prices, and prediction horizons. The cost-saving of the MPC was approximately 10.6 % compared to the conventional control. The MPC was expanded to a residential building cluster considering the peak demand charge. In an hourly shedding and load-up scenario, the performances of the MPC and the heuristic prior-based control (PBC) are promising. When shedding was enforced all day, the peak demand saving of the MPC was 36~38 %, whereas that of the PBC was 25.7 % compared to the baseline. In addition, the monthly electricity bill, including the operation and peak demand cost, was investigated with different demand charge rates and weather conditions. The total saving decreased with a low demand charge rate and hot conditions, and the operation cost saving was compromised with more aggressive demand shedding.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Optimal hybrid power plants for electric vehicle charging demand

Transmission constraints, increasing motivations to decarbonize, and concerns over peak electric vehicle (EV) load impacts on local grids have driven electric customers to consider behind-the-meter, hybrid power plant generation and storage at the distributed-grid level for EV charging. In this study, we develop capabilities to optimize hybrid power plant component capacities for EV charging. We then demonstrate these capabilities in a case study for Boulder, Colorado, using public EV charging data as well as wind and solar resource data. Our results show system designs that balance the cost of energy with load-meeting and peak shaving performance. Within the case study, systems designed for wind, solar photovoltaic (PV), and storage resulted in lower cost of energy than those optimized for PV and storage only. This indicates that in areas where wind resource exists, hybrid power plants that include wind, PV, and battery assets can better meet EV charging loads (including peak loads that are prone to overloading local grids) than PV and battery assets alone. Future work to address limitations in this paper include extending cost modeling to include performance losses (e.g., based on operations or weather) and charging station costs to estimate levelized cost of charging, and quantifying uncertainty and error in our aggregation methods for estimating EV charging loads at the hourly timescale.

14 SOLAR ENERGY↗
DOE OSTI2022

Arrhenius Analysis of the Degradation Modes in Emerging Photovoltaic Backsheets

With increasingly large-scale deployments of photovoltaic (PV) modules to meet global energy demands, interest in better establishing modules' lifespans is growing. We report on the performance of co-extruded polyolefin- (PO)-based backsheets as environmentally friendly alternatives to fluoropolymer-reinforced polyethylene-terephthalate (PET)-based backsheets using three hygrometric accelerated test conditions. After completing cumulative 4000 hours of aging, we analyzed data from electrical performance (I-V), surface roughness (gloss), and appearance (L, a*, b* color) characterizations to quantify degradation rates, quantify the corresponding activation energy, and cross-correlate between the characteristics examined, thereby providing insights into the relationship between physical characteristics and operating performance.

BackFLIP↗
DOE OSTI2023

Projections of Hourly Meteorology by County Based on the IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulations

This dataset contains 40 years (1980-2019) of historical hourly meteorology and 80 years (2020-2099) of projected hourly meteorology for each county in the conterminous United States. Details about the scenarios and variables included in this dataset are in the readme.pdf file. This dataset is derived from the IM3/HyperFACETS Thermodynamic Global Warming (TGW) simulations (https://doi.org/10.57931/1885756). More details on the TGW approach can be found at: https://tgw-data.msdlive.org/. If you use this dataset please also cite the raw TGW dataset (Jones, A. D., Rastogi, D., Vahmani, P., Stansfield, A., Reed, K., Thurber, T., Ullrich, P., & Rice, J. S. (2022). IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulation Datasets (v1.0.0) [Data set]. MSD-LIVE Data Repository. https://doi.org/10.57931/1885756). The four future climate scenarios in the TGW data are: rcp45cooler, rcp45hotter, rcp85cooler, and rcp85hotter. For the historical period and each of the four future scenarios the dataset has hourly estimates of the spatial-average of six meteorological variables for each county: Temperature, specific humidity, shortwave radiation, longwave radiation, and the U (east-west) and V (north-south) components of the wind speed. Times for each file are in the filename and all times are in Coordinated Universal Time (UTC). Counties are identified by their Federal Information Processing Standard (FIPS) code. The mapping between counties and FIPS codes is provided in the state_and_county_fips_codes.csv file. The code to go from the raw TGW data to county-level projections is available at: https://github.com/IMMM-SFA/im3components/tree/main/im3components/wrf_to_tell.

County↗
DOE OSTI2022

Arrhenius Analysis of the Degradation Modes in BackFLIP Study of Emerging Photovoltaic Backsheets: Preprint

With increasingly large-scale deployments of photovoltaic (PV) modules to meet global energy demands, interest in better establishing module lifespans is growing. We report on the performance of co-extruded polyolefin- (PO) based backsheets as environmentally friendly alternatives to fluoropolymer-reinforced polyethylene-terephthalate- (PET)-based backsheets using three hygrometric accelerated test conditions. After completing 4000 cumulative hours of aging, we analyzed data from electrical performance (I-V), surface roughness (gloss), and appearance (L, a*, b* color) characterizations are analyzed to quantify degradation rates, quantify the corresponding activation energy, and cross-correlate between the characteristics examined, thereby providing insights into the relationship between physical characteristics and operating performance.

BackFLIP↗
DOE OSTI2023

Impact of Seasonal Snow-Cover Change on the Observed and Simulated State of the Atmospheric Boundary Layer in a High-Altitude Mountain Valley

The structure and evolution of the atmospheric boundary layer (ABL) under clear-sky fair weather conditions over mountainous terrain is dominated by the diurnal cycle of the surface energy balance and thus strongly depends on surface snow cover. We use data from three passive ground-based infrared spectrometers deployed in the East River Valley in Colorado's Rocky Mountains to investigate the response of the thermal ABL structure to changes in surface energy balance during the seasonal transition from low to high snow cover. Temperature profiles were retrieved from the infrared radiances using the optimal estimation physical retrieval Tropospheric Remotely Observed Profiling via Optimal Estimation. A nocturnal surface inversion formed in the valley during clear-sky days, which was subsequently mixed out during daytime with the development of a convective boundary layer when snow cover was low. Over high snow cover, a very shallow convective boundary layer formed, above which the inversion persisted through the daytime hours. We compare these observations to NOAA's operational High-Resolution-Rapid-Refresh model and find large warm biases on clear-sky days resulting from the model's inability to form strong nocturnal inversions and to maintain the stable stratification in the valley during daytime when there was snow on the ground. We suggest several factors contributing to the large model errors. These are (a) the inability of the model to represent well-developed thermally driven flows likely due to the too coarse horizontal grid spacing (3 km), (b) too much convective mixing during daytime, and (c) too strong vertical coupling between the valley atmosphere and the free troposphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A validated thermal and biological model for predicting algal productivity in large scale outdoor cultivation systems

Proper assessment of the sustainability of algal products requires an understanding of algal growth rate with regional and temporal resolution. This study developed a bulk growth model that utilizes geospatial data, reactor geometry inputs, and a maximum of six strain-specific parameters to predict algal productivity with temporal and regional resolution. The model requires local weather data to calculate the time-resolved culture temperature which is combined with a biological model based on maximum theoretical carbon fixation to predict the time-resolved algal concentration. Validation of the model against experimental data illustrates an average ac- curacy of 0.27% ± 5.32% when comparing algal concentration at harvest over 45 days of cultivation data for Galdieria sulphuraria 5587.1, and Galdieria sulphuraria Soos grown in photobioreactors (PBRs) in Mesa, AZ (33.4152° N, 111.8315° W). For open raceway ponds (ORPs), an accuracy of 0.9% ± 2.35% was achieved when comparing algal concentration at harvest over 50 days of cultivation data for Chlorella vulgaris, Desmodesmus intermedius, Nannochloropsis oceanica grown in Atlanta, GA (33.7490° N, 84.3880° W) and Mesa, AZ (33.4152° N, 111.8315° W). The validation trials spanned three seasons (winter, spring, and summer) to ensure model ac- curacy throughout the year, and concentration between harvests was modeled with hourly resolution. The validated model is used to assess the productivity at several case-study locations in the United States with Chlorella vulgaris, grown in open raceway ponds and Galdieria sulphuraria grown in vertical flat panel photo- bioreactors. In conclusion, the model has been published as an open-source tool, in an effort to increase the fidelity of future studies that rely on outdoor algae cultivation for feedstock production and allow for time resolved results for future techno-economic and life cycle assessments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Thermal performance and energy consumption validation of an occupied local government office building outfitted with ceiling tile phase change materials

Buildings present an opportunity for energy conservation and the modulation of peak energy demand through controlled Heating, Ventilation, and Air Conditioning (HVAC) energy use. The administrative and office building stock in the United States holds potential to achieve energy and demand savings through retrofits such as insulation, weatherization, and thermal energy storage. Specifically, there is a need to validate passive phase change material (PCM) applications in full scale in aging administrative buildings in the US to evaluate the energy benefits. Aim of this study was to conduct a whole building level thermal and energy validation of an operational building and explore an alternative method for evaluating energy efficiency. To accomplish this, the study employed PCMs in the drop ceiling and carry out an energy audit and on-site measurement of HVAC systems' energy demand and consumption. A full-scale EnergyPlus energy model, modeled by the authors, served as a baseline for evaluation. The results show that calibrated model's envelope temperature measures fall within the accepted errors. HVAC energy simulation results also fall within the accepted errors for monthly and hourly pre- and post- PCM retrofit electricity and natural gas data. The novelty of this study is that it employees energy scales per Heating Degree Hour and Cooling Degree Hour, in contrast to the commonly used Heating Degree Days and Cooling Degree Days as reported in the literature to analyze energy savings. These findings underscore the pivotal role of a calibrated model in assessing the efficacy of a singular energy measure, like a PCM-retrofitted ceiling, in an occupied office building.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

2D Dam-Break Analysis of L Lake and PAR Pond Dams Using HEC-RAS

In 1991 a dam-break study was conducted for the high hazard dams located at L Lake and PAR Pond on the Savannah River Site. Two scenarios were considered, over topping from a Probable Maximum Flood (PMF), and a fair weather dam-break for either or both dams. Unfortunately, no inundation map was developed from the study. The purpose of this project was to redo the original dam-break study with improved data and methodology to generate Inundation maps to assist with emergency response and evacuation plans. The Hydrologic Engineering Center's River Analysis System (HEC-RAS) is a free to download river analysis modeling program developed by the US Army Corps of Engineers capable of 1D and 2D hydraulic calculations. Version 5.0.7 (released March 2019) was used for this project. Digital elevation models for the area were retrieved from the US Geological Survey database and converted to a .hdf file within the program. Then the 2D flood area was identified from the contours. Both L Lake and PAR Pond were inputted as 1D storage areas because DEM data does not contain elevation values under water bodies. An elevation vs volume curve was available for both storage areas. Initial elevations were set for both scenarios. Both dams are earthen dams. The Steel Creek dam at L Lake has 6 ft diameter conduit with an upper and lower sluice gate. PAR pond dam consist of a weir and sluice gate connected to an 8 x 8 ft channel. Both outlets were modeled with a pool elevation vs discharge curve. The steel creek dam sluice gates were assumed to be fully open in all cases. As in the previous study, the dams were set to breach when they were overtopped by 1.5 ft during PMF conditions (Figure 1). A fair weather breach was set to be due to a piping failure (Figure 1). In the dual dam break during fair weather conditions the PAR pond dam fails 3 hours after Steel Creek to achieve maximum flooding in the down stream reaches. Simulation was run 3 days for each case and with a 1 minute computational interval. Maximum flooding occurs under PMF conditions with the failure of both dams. PAR pond dam fails first 16 hours and 32 minutes after the start of the simulation with the Steel creek dam failing 6 minutes later. In all cases, the bridges and roads spanning Steel Creek and Lower Three Runs will be inundated and potentially washed away. The Burtons Ferry Highway south of the storage areas will be partially flooded during PMF failure, dual fair weather failure, and PAR pond failure under fair weather conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Methane Emissions Produced by Pneumatic Devices and Produced Water Tanks on Natural Gas Wellsites

In recent years, more scrutiny has been placed on the release of greenhouse gasses (GHGs) by the oil and gas industry in North America as climate concerns increase. In the coming years, stricter regulations proposed by the Environmental Protection Agency (EPA) concerning the release of GHGs will further direct attention to GHG emissions quantification, modeling, and overall reduction. Active natural gas wellsites employ production equipment that routinely emits methane during normal operation. Production equipment often includes, but is not limited to, gas production units (GPUs), pneumatic controllers (PCs) and actuators powered by produced natural gas, and produced water storage tanks. This work details direct methane emission measurements taken at active natural gas wellsites originating from intermittent pneumatic controllers and produced water storage tanks. Efforts to model methane flows originating from these sources are also detailed, and those results are compared to direct measurement. The direct methane emissions measurement campaign collected flow data from two active dry wellsites in the Marcellus shale region. These measurement campaigns captured, in total, several weeks of continuous data from these sites. Data included multiple pneumatic device vent flowrate channels, a single channel monitoring total emissions vented from the produced water storage tanks, and corresponding site weather data. Periodic composition measurements were taken from flows vented from produced water tanks. Computational modeling efforts attempted to mimic a given site’s methane emissions behavior given limited input parameters. Direct measurement data and simulation data yielded, through reduction and analysis, apparent methane emissions factors, statistics on pneumatic device actuation events, important relationships between GPU parameters and pneumatic device actuation events, produced water storage tank vent flows and flow compositions, and parameters most contributing to the magnitude and frequency of these fugitive methane emissions. Measurements, considering data from a 72hr period, produced PC emissions factors from 0.008 to 0.03 SCFH per device with an average device emitting 0.026 SCFH at the first site. The second site produced PC emissions factors spanning from 0.05 to 25.47 SCFH with an average device emitting 1.93 SCFH not including the 25.47 SCFH device, which was assumed to be malfunctioning. Two unique water tank emission measurements were made, 618 g CH4 per hour and 32.6 g CH4 per hour. On a water basis, the water tank emissions factors were 0.66 and 0.042 kg CH4 per bbl of water, respectively.

03 NATURAL GAS↗
DOE OSTI2024

Deep-learning-driven simulations of boundary layer clouds over the Southern Great Plains

Abstract. Based on long-term observations at the Southern Great Plains site by the Atmospheric Radiation Measurement (ARM) program for training and validation, a deep-learning model is developed to simulate the daytime evolution of boundary layer clouds (BLCs) from the perspective of land–atmosphere coupling. The model takes ARM measurements (including early-morning soundings and diurnally varying surface meteorological conditions and heat fluxes) as inputs and predicts hourly estimates (including cloud occurrence, the positions of cloud boundaries, and the vertical profile of the cloud fraction) as outputs. The deep-learning model offers good agreement with the observed cloud fields, especially in the accuracy with which cloud occurrence and base height are reproduced. When the inputs are substituted by reanalysis data from ERA5 and MERRA-2, the outputs of the deep-learning model provide a better agreement with observation than the cloud fields extracted from ERA5 and MERRA-2 themselves. Thus, the deep-learning model shows great potential to serve as a diagnostic tool for the performance of physics-based models in simulating stratiform and cumulus clouds. By quantifying biases in clouds and attributing them to the simulated atmospheric state variables versus the model-parameterized cloud processes, this observation-based deep-learning model may offer insights into the directions needed to improve the simulation of BLCs in physics-based models for weather forecasting and climate prediction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A high-resolution unified observational data product of mesoscale convective systems and isolated deep convection in the United States for 2004–2017

Deep convection possesses markedly distinct properties at different spatiotemporal scales. We present an original high-resolution (4 km, hourly) unified data product of mesoscale convective systems (MCSs) and isolated deep convection (IDC) in the United States east of the Rocky Mountains and examine their climatological characteristics from 2004 to 2017. The data product is produced by applying an updated Flexible Object Tracker algorithm to hourly satellite brightness temperature, radar reflectivity, and precipitation datasets. Analysis of the data product shows that MCSs are much larger and longer-lasting than IDC, but IDC occurs about 100 times more frequently than MCSs, with a mean convective intensity comparable to that of MCSs. Hence both MCS and IDC are essential contributors to precipitation east of the Rocky Mountains, although their precipitation shows significantly different spatiotemporal characteristics. IDC precipitation concentrates in summer in the Southeast with a peak in the late afternoon, while MCS precipitation is significant in all seasons, especially for spring and summer in the Great Plains. The spatial distribution of MCS precipitation amounts varies by season, while diurnally, MCS precipitation generally peaks during nighttime except in the Southeast. Potential uncertainties and limitations of the data product are also discussed. The data product is useful for investigating the atmospheric environments and physical processes associated with different types of convective systems; quantifying the impacts of convection on hydrology, atmospheric chemistry, and severe weather events; and evaluating and improving the representation of convective processes in weather and climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Bias Correction and Statistical Downscaling of Future Solar Irradiance Projections Using the NSRDB

Assessing renewable energy resources under future climate scenarios has been highlighted to understand potential impacts of future climate change in renewable generation on the power sector. Climate model projection has been recognized by the renewable energy community as a useful data set to analyze the impacts of future climate change on renewable resources. However, future climate projections generated from general circulation models (GCMs) contain inherent biases that need to be corrected for accurate analysis of future projections of climate variables. In addition, the coarse spatiotemporal resolution of GCMs needs to be improved for regional climate studies. In this work, we develop statistical methods to downscale future projections of global horizontal irradiance (GHI) in a computationally efficient way. Our approach builds statistical downscaling models that correct bias of climate projection of GHI and downscale the future GHI projection from daily-scale to hourly-scale. The National Solar Radiation Database (NSRDB) is used to calibrate the statistical models and validate the downscaled GHI projections across the contiguous United State (CONUS). Preliminary results show that the statistical approach efficiently downscales climate projections of GHI with a nBIAS of 3%, nMAE of 34 % and nRMSE of 46% calculated against NSRDB for CONUS. This study describes the implemented methodology and initial results as well as future research to create high-resolution climate data sets for solar energy applications.

analytical models↗
DOE OSTI2024

Estimation of Surface Sensible Heat Flux due to Precipitation over CONUS and Its Impact on Urban Extreme Precipitation Modeling

The surface sensible heat flux induced by precipitation (Q P ) is a consequence of the temperature difference between the surface and the rain droplets. Despite its seemingly negligible nature, Q P is frequently omitted from both meteorological and climatological models. Nevertheless, it is important to acknowledge the numerous occasions in which the instantaneous values of Q P can be significant, particularly during extreme precipitation events. This study undertakes a comprehensive assessment of Q P across the contiguous United States (CONUS) utilizing high-resolution reanalysis, observational data, and numerical modeling to examine the influence of Q P on precipitation and the surface energy budget. The findings indicate that the spatial distribution of Q P climatology is analogous to that of precipitation, with magnitudes ranging from 2 to 3 W m -2 predominantly over the Midwest and Southeast regions. A seasonal analysis of QP reveals that the highest values occurring during the June–August (JJA) period, averaging 3.18 W m -2 . Peak Q P values of approximately 4 W m -2 are observed during JJA over the Great Plains region. We hypothesize that the Q P during an extreme precipitation event would be nonnegligible and have a significant impact on the local weather. To test this conjecture, we perform high-resolution simulations with and without Q P during an extreme precipitation event over the Chicago Metropolitan Area (CMA). The results show that the Q P may be a dominant factor compared to other components of surface heat flux during the zenith of precipitation hours. Also, Q P has the potential to not only diminish precipitation but also alter and reconfigure the remaining surface energy budget components.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Lagrangian perspective on tropical anvil cloud lifecycle in present and future climate

The evolution of tropical anvil clouds from their origin in deep convective cores to their slow decay determines the climatic effects of clouds in tropical convective regions. Despite the relevance of anvil clouds for climate and responses of clouds to global warming, processes dominating their evolution are not well understood. Currently available observational data reveal instantaneous snapshots of anvil cloud properties, but cannot provide a process-based perspective on anvil evolution. We therefore conduct simulations with the high resolution version of the Exascale Earth System Model in which we track mesoscale convective systems over the Tropical Western Pacific and compute trajectories that follow air parcels detrained from peaks of convective activity. With this approach we gain new insight into the anvil cloud evolution both in present day and future climate. Comparison with geostationary satellite data shows that the model is able to simulate maritime mesoscale convective systems reasonably well. Trajectory results indicate that anvil cloud lifetime is about 15 hours with no significant change in a warmer climate. The anvil ice mixing ratio is larger in a warmer climate due to a larger source of ice by detrainment and larger depositional growth leading to a more negative net cloud radiative effect along detrained trajectories. However, the increases in sources are counteracted by increases in sinks of ice, particularly snow formation and sedimentation. Furthermore, we find that the mean anvil cloud feedback along trajectories is positive and consistent with results from more traditional cloud feedback calculation methods.

climate, weather, mesocale cellular convection↗
DOE OSTI2021

Meteorological data from the Billy Bar site at the East River, Colorado

This dataset includes Quality Assessed and Quality Controlled (QA/QC) meteorological data from the Billy Bar field site in the East River Watershed, Colorado in order to inform watershed hydrobiogeochemical processes. The data includes 1-hour aligned time series of Solar Radiation, Wind Speed, Wind Direction, Air Temperature, Relative Humidity, Barometric Pressure, and Precipitation. For each parameter, the QA flags are given: 1 is for extreme (potential abnormal values), and 0 is for values in the expected range. The Rmarkdown document is a stand-alone file/notebook that preserves the text, code, and code results, as well as formatting contained in the original R script. The Data profiling report is a summary and graphical presentation of the data exploration process for data analysis and model building, so that users could focus on understanding data and extracting insights. The report provides a summary of each variable and does data profiling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Comparison of Energetic Electron Fluxes Measured by GPS and THEMIS Spacecraft in the Inner Magnetosphere

Key elements of space weather models are energetic electron fluxes in the inner magnetosphere and the outer radiation belt. Flux depletion is driven by various loss processes: scattering into atmosphere, magnetopause shadowing. Flux enhancement is driven by various acceleration processes: local wave-particle interactions, radial transport, plasma sheet injections. Many of these processes operate on ~ hour timescales. Such mesoscale flux variations are not well traced by equatorial spacecraft with much longer orbits. Energetic electron detectors onboard the Global Positioning System (GPS) constellation provide a unique opportunity for probing such ~ hour-scale flux variations. Measurements from up to 23 identically instrumented GPS satellites cover a wide energy and L-shell range with a subhour time resolution. However, their orbits are inclined and thus all measurements at L-shell >4.3 are off-equatorial. Here, in this report, we present a comparison of equatorial THEMIS and nonequatorial GPS measurements of omnidirectional ≤600 keV electron fluxes. Such a comparison allows us to derive coefficients for using off-equatorial GPS fluxes to infer the equatorial values. These coefficients depend on particle energy and L-shell. We demonstrate a new data set derived from GPS measurements and discuss how it can be used to investigate mesoscale dynamics of energetic electron fluxes in the inner magnetosphere.

79 ASTRONOMY AND ASTROPHYSICS↗