Search NASA⌕ Search

SEARCH · Search NASA

Results for “humidity profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

High resolution vertical profiles of wind, temperature and humidity obtained by computer processing and digital filtering of radiosonde and radar tracking data from the ITCZ experiment of 1977

Results are presented from computer processing and digital filtering of radiosonde and radar tracking data obtained during the ITCZ experiment when coordinated measurements were taken daily over a 16 day period across the Panama Canal Zone. The temperature relative humidity and wind velocity profiles are discussed.

Danielson, E. F.↗
NASA NTRS1994

High-spatial-resolution passive microwave sounding systems

The principal contributions of this combined theoretical and experimental effort were to advance and demonstrate new and more accurate techniques for sounding atmospheric temperature, humidity, and precipitation profiles at millimeter wavelengths, and to improve the scientific basis for such soundings. Some of these techniques are being incorporated in both research and operational systems. Specific results include: (1) development of the MIT Microwave Temperature Sounder (MTS), a 118-GHz eight-channel imaging spectrometer plus a switched-frequency spectrometer near 53 GHz, for use on the NASA ER-2 high-altitude aircraft, (2) conduct of ER-2 MTS missions in multiple seasons and locations in combination with other instruments, mapping with unprecedented approximately 2-km lateral resolution atmospheric temperature and precipitation profiles, atmospheric transmittances (at both zenith and nadir), frontal systems, and hurricanes, (3) ground based 118-GHz 3-D spectral images of wavelike structure within clouds passing overhead, (4) development and analysis of approaches to ground- and space-based 5-mm wavelength sounding of the upper stratosphere and mesosphere, which supported the planning of improvements to operational weather satellites, (5) development of improved multidimensional and adaptive retrieval methods for atmospheric temperature and humidity profiles, (6) development of combined nonlinear and statistical retrieval techniques for 183-GHz humidity profile retrievals, (7) development of nonlinear statistical retrieval techniques for precipitation cell-top altitudes, and (8) numerical analyses of the impact of remote sensing data on the accuracy of numerical weather predictions; a 68-km gridded model was used to study the spectral properties of error growth.

Staelin, D. H.↗
DOE OSTI2022

Atmospheric temperature, water vapour and liquid water path from two microwave radiometers during MOSAiC

The microwave radiometers HATPRO (Humidity and Temperature Profiler) and MiRAC-P (Microwave Radiometer for Arctic Clouds - Passive) continuously measured radiation emitted from the atmosphere throughout the Multidisciplinary drifting Observatory for the Study of the Arctic Climate (MOSAiC) expedition on board the research vessel Polarstern. From the measured brightness temperatures, we have retrieved atmospheric variables using statistical methods in a temporal resolution of 1 s covering October 2019 to October 2020. The integrated water vapour (IWV) is derived individually from both radiometers. In addition, we present the liquid water path (LWP), temperature and absolute humidity profiles from HATPRO. To prove the quality and to estimate uncertainty, the data sets are compared to radiosonde measurements from Polarstern. The comparison shows an extremely good agreement for IWV, with standard deviations of 0.08–0.19 kg m -2 (0.39–1.47 kg m -2 ) in dry (moist) situations. The derived profiles of temperature and humidity denote uncertainties of 0.7–1.8 K and 0.6–0.45 gm -3 in 0–2 km altitude.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2015

A Microwave Radiometric Method to Obtain the Average Path Profile of Atmospheric Temperature and Humidity Structure Parameters and Its Application to Optical Propagation System Assessment

The values of the key atmospheric propagation parameters Ct2, Cq2, and Ctq are highly dependent upon the vertical height within the atmosphere thus making it necessary to specify profiles of these values along the atmospheric propagation path. The remote sensing method suggested and described in this work makes use of a rapidly integrating microwave profiling radiometer to capture profiles of temperature and humidity through the atmosphere. The integration times of currently available profiling radiometers are such that they are approaching the temporal intervals over which one can possibly make meaningful assessments of these key atmospheric parameters. Since these parameters are fundamental to all propagation conditions, they can be used to obtain Cn2 profiles for any frequency, including those for an optical propagation path. In this case the important performance parameters of the prevailing isoplanatic angle and Greenwood frequency can be obtained. The integration times are such that Kolmogorov turbulence theory and the Taylor frozen-flow hypothesis must be transcended. Appropriate modifications to these classical approaches are derived from first principles and an expression for the structure functions are obtained. The theory is then applied to an experimental scenario and shows very good results.

Atmospheric turbulence↗
NASA NTRS1994

Temperature-moisture biases in ECMWF analyses based on clear sky longwave simulations constrained by SSMI and MSU measurements and comparisons to ERBE estimates

Clear sky longwave radiation fluxes for the summer of 1988 and winter of 1989 have been simulated with a radiative transfer model that includes detailed treatment of atmospheric gas absorption. The input data to the model are humidity and temperature profiles from European Center for Medium-Range Weather Forecasts (ECMWF) analyses and surface temperature measurements from the International Satellite Cloud Climatology Project. To reduce the inherent uncertainties in humidity profiles, the ECMWF moisture fields have been adjusted, based on the climatological relationship between the moisture profile and total precipitable water (PW), so that the ECMWF PW is equal to that derived from Special Sensor Microwave Imager (SSMI) data. SSMI and ECMWF PW patterns are generally similar, but significant differences in magnitude are found in the low latitudes, particularly over the subtropical oceans in the Southern Hemisphere. At the same time the tropospheric brightness temperature (T(sub B)) at 53.74 GHz has been computed using a microwave transfer model with ECMWF temperature and humidity fields as inputs. The comparison of computed T(sub B) with the Microwave Sounding Unit (MSU) channel 2 T(sub B) revealed differences larger than 1.5 K over most of the oceans, suggesting that the ECMWF model atmosphere has a cold bias. Maximum biases greater than 3 K are found in low latitudes. After removing the bias from the ECMWF temperature field, a new set of temperature profiles yielding brightness temperature equal to MSU channel 2 T(sub B) has been obtained. Simulation results clearly demonstrate that inclusion of satellite estimates of PW and T(sub B) enhances the accuracy of the clear sky LW flux simulation, substantially reducing the differences from Earth Radiation Budget Experiment (ERBE) estimates. Global averages indicate that the model-derived top-of-atmosphere (TOA) clear sky fluxes from the adjusted moisture and temperature profiles are in very good agreement with satellite-measured ERBE values, differing by only 1.4 W/sq m. By contrast, the calculation using only ECMWF analyses without any adjustments gives a significant underestimation of TOA clear sky fluxes up to 10.7 W/sq m compared to the satellite measurements, suggesting that the constraint method can significantly improve the accuracy in the radiation budget simulation. The results also indicate that the ECMWF-based simulation errors are, at least for the two seasons studied, mainly attributed to the error in the temperature field rather than to errors in the moisture field.

Sohn, Byung-Ju↗
NASA NTRS2024

Vertical Structure of a Springtime Smoky and Humid Troposphere Over the Southeast Atlantic From Aircraft and Reanalysis

The springtime atmosphere over the southeast Atlantic Ocean (SEA) is subjected to a consistent layer of biomass burning (BB) smoke from widespread fires on the African continent. An elevated humidity signal is coincident with this layer, consistently proportional to the amount of smoke present. The combined humidity and BB aerosol has potentially significant radiative and dynamic impacts. Here, we use aircraft-based observations from the NASA ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) deployments in conjunction with reanalyses to characterize covariations in humidity and BB smoke across the SEA. The observed plume–vapor relationship, and its agreement with the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis version 5 (ERA5) and Copernicus Atmosphere Monitoring Service (CAMS) reanalysis, persists across all observations, although the magnitude of the relationship varies as the season progresses. Water vapor is well represented by the reanalyses, while CAMS tends to underestimate carbon monoxide especially under high BB. While CAMS aerosol optical depth (AOD) is generally overestimated relative to ORACLES AOD, the observations show a consistent relationship between carbon monoxide (CO) and aerosol extinction, demonstrating the utility of the CO tracer to understanding vertical aerosol distribution. We next use k-means clustering of the reanalyses to examine multi-year seasonal patterns and distributions. We identify canonical profile types of humidity and of CO, allowing us to characterize changes in vapor and BB atmospheric structures, and their impacts as they covary. While the humidity profiles show a range in both total water vapor concentration and in vertical structure, the CO profiles primarily vary in terms of maximum concentration, with similar vertical structures in each. The distribution of profile types varies spatiotemporally across the SEA region and through the season, ranging from largely one type in the northeast and southwest to more evenly distributed between multiple types where air masses meet in the middle of the SEA. These distributions follow patterns of transport from the humid, smoky source region (greatest influence in the northeast of the SEA) and the seasonal changes in both humidity and smoke (increasing and decreasing through the season, respectively). With this work, we establish a framework for a more complete analysis of the broader radiative and dynamical effects of humid aerosols over the SEA.

Kristina Pistone↗
NASA NTRS2000

Use of Maps, GTE and UARS-MLS Data in Understanding Tropospheric Processes Critical to Model Development

Two of the major problems in using meteorological models to explain observed tropospheric trace constituent distributions and thereby to understand the global budgets of the tracers are to properly define the vertical layered structure in the free atmosphere, and to understand the contribution of advection processes in generating horizontal inhomogeneities at all scales. We proposed to tackle these problems through the examination of an extensive collection of trace constituent data from research and commercial aircraft in conjunction with meteorological data from the European Center for Medium-Range Weather Forecasts. The physical mechanisms responsible for these advection and layering processes were explored and their implications for theories and models assessed. In addition, we calculated examples of how thin layers (not currently resolved by models) affect the radiative heating/cooling rates. We developed an improved algorithm for trace constituent layer detection, and used it to analyze over 100,000 km of ozone and humidity vertical profiles collected by instruments piggybacked on commercial aircraft. The same method was also used to examine ozone, humidity, carbon monoxide, and methane data from the NASA Pacific Exploratory Missions. The major conclusions from these studies were that tropospheric trace constituent layers are ubiquitous, and that their characteristics are remarkably universal. These results support the notion that ozone layers coming in from the stratosphere play a large role in creating tropospheric layers, whether by themselves or by capping buoyant pollution plumes. This, in turn, has important implications for the transport (especially in the vertical) of trace gases and how it is represented in models.

Newell, Reginald E.↗
NASA NTRS2022

Validation of IMERG Oceanic Precipitation over Kwajalein

The integrated Multi-satellitE Retrievals for GPM (IMERG) Version V05B and V06B precipitation products from the Global Precipitation Measurement (GPM) mission are validated against ground-based observations from the Kwajalein Polarimetric S-band Weather Radar (KPOL) deployed at Kwajalein Atoll in the central Pacific Ocean. Such a validation is particularly important as comprehensive surface measurements over the oceans are practically infeasible, which hampers the identification of possible errors, and improvement of future versions of IMERG and other satellitebased retrieval algorithms. The V05B and V06B IMERG products are validated at their native 0.1°, 30 min resolution from 2014 to 2018 based on both volumetric and categorical metrics. This validation study indicates that precipitation rates from both IMERG V05B and V06B are underestimated with respect to radar surface estimates, but the underestimation is much reduced from V05B IMERG V06B outperforms V05B with reduced systematic bias and improved precipitation detectability. The IMERG performance is further traced back to its individual sensors and morphing-based algorithms. The overall underestimation in V05B is mainly driven by the negative relative biases from morphing-based algorithms which are largely corrected in V06B. Imagers perform generally better than sounders because of the usage of low-frequency channels in imagers which can better detect emission signals by the hydrometeors. Among imagers, the GPM Microwave Imager (GMI) and Advanced Microwave Scanning Radiometer Version 2 (AMSR2) are the best, followed by Special Sensor Microwave Imager/Sounder (SSMIS). Among sounders, the Microwave Humidity Sounder (MHS) is the best, followed by Advanced Technology Microwave Sounder (ATMS) and the Sounder for Atmospheric Profiling of Humidity in the Intertropics by Radiometry (SAPHIR) for V06B. Among all categories, morph-only and IR+morph only perform better than SAPHIR. SAPHIR shows the worst performance among all categories, likely due to its limited channel selection. It is envisaged that these results will improve our understanding of IMERG performance over oceans and aid in the improvement of future versions of IMERG.

KPOL↗
NASA NTRS2020

Assimilating All-Sky Microwave Radiance Data to Improve NASA GEOS Forecasts and Analysis

The NASA Global Modeling and Assimilation Office (GMAO) has been pursuing efforts to utilize all-sky (clear+cloudy+precipitating) MW radiance data and has developed a system to assimilate all-sky GPM Microwave Imager (GMI) radiance data in the Goddard Earth Observing System (GEOS) during the last PMM funding period. The system provides additional constraints on the analysis process near the storm regions and adjusts the geophysical parameters such as precipitation, cloud, moisture, surface pressure, and wind by combining information from GMI radiance measurements and model forecasts in an optimal manner. The system proved that assimilating the GMI all-sky radiance data improve the GEOS atmospheric analyses and forecasts. This all-sky data framework has been included in the GEOS Forward Processing (FP) system since July 11, 2018 and assimilates all-sky GMI data in real-time for GEOS global analysis and forecast production at the GMAO. We are currently extending this all-sky GMI radiance data assimilation system to assimilate more all-sky MW radiance data from other sensors such as the Microwave Humidity Sounder (MHS), the Advanced Technology Microwave Sounder (ATMS), the Special Sensor Microwave Imager/Sounder (SSMIS), Advanced Microwave Scanning Radiometer 2 (AMSR2), and the Sounder for Atmospheric Profiling of Humidity in the Intertropics by Radiometery (SAPHIR) onboard the GPM constellation spacecrafts. Preliminary results from this extended all-sky system show increased benefit from cloud- and precipitation-affected MW radiances with much larger spatial and temporal coverages compared to the all-sky system assimilating GMI alone and improved GEOS forecast skills especially for lower tropospheric humidity fields.

Kim, Min-Jeong↗
NASA NTRS2000

Use of Maps, GTE and UARS-MLS Data in Understanding Tropospheric Processes Critical to Model Development

Two of the major problems in using meteorological models to explain observed tropospheric trace constituent distributions and thereby to understand the global budgets of the tracers are to properly define the vertical layered structure in the free atmosphere, and to understand the contribution of advection processes in generating horizontal inhomogeneities at all scales. We proposed to tackle these problems through the examination of an extensive collection of trace constituent data from research and commercial aircraft in conjunction with meteorological data from the European Center for Medium-Range Weather Forecasts. The physical mechanisms responsible for these advection and layering processes were explored and their implications for theories and models assessed. In addition, we calculated examples of how thin layers (not currently resolved by models) affect the radiative heating/cooling rates. We developed an improved algorithm for trace constituent layer detection, and used it to analyze over 100,000 km of ozone and humidity vertical profiles collected by instruments piggybacked on commercial aircraft. We have also performed radiative heating/cooling calculations on some observed layer structures, and have demonstrated that the sharp edges on humidity layers can have strong local effects of self-stabilization (dry layers) or destabilization (wet layers), and have suggested that clear-air turbulence might result from the latter case through convective instability. We also systematically analyzed the mesoscale variabilities, not only of the trace constituents, but also of the aircraft-measured dynamical variables.

Newell, Reginald E.↗
DOE OSTI2024

Influence of Atmospheric Slant Path on Geostationary Hyperspectral Infrared Sounder Radiance Simulations

Accurately simulating a geostationary hyperspectral infrared sounder is critical for quantitative applications. Traditional radiation simulations of such instruments often overlook the influence of slant observation geometry by using vertical profile assumption, leading to inadequate simulation accuracy. By using global atmospheric profiles with 1 km spatial resolution, the slant-path effects on brightness temperature simulations are quantified. Experiments indicate that the slant geometry has less impact on longwave brightness temperature simulations and has a substantial impact on middle-wave brightness temperature simulations. It may introduce 0.5 K (or more) uncertainty to brightness temperatures of water vapor absorption channels when the satellite zenith angle is greater than 45°. Considering the slant profile is recommended for quantitative applications of geostationary hyperspectral sounder data, such as sounding retrieval and data assimilation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1986

Remote sensing of land-surface temperature from HIRS/MSU data

A relaxation algorithm which permits meteorological parameters to be obtained from satellite data, without a priori assumptions about the properties of the other unknowns in the field of view, was developed. Atmospheric temperature profiles, atmospheric humidity, cloud cover, cloud top height, cloud top temperature, sea-surface temperature, land-surface temperature, snow cover, and ice cover are derived. Simultaneous determination of atmospheric and surface thermal structure and the cloud distribution provides information on heat sources and sinks, storage rates, and transport phenomena in the atmosphere. Such information is critical in determining the driving mechanisms for motions in the atmosphere and oceans and in improving numerical weather prediction.

Chahine, M. T.↗
NASA NTRS2000

1DVAR Analysis of Temperature and Humidity using GPS Radio Occulation Data

The Global Positioning System (GPS) enables positioning with a very small receiver. The signals transmitted by the GPS satellites are sensitive to the atmosphere and can be used to perform soundings with the radio occultation technique (e.g., Kursinski et al., 1997). The GPS signal can be converted to refractivity N via the Abel transform. The refractivity can then be related to atmospheric pressure P, temperature T, and water vapor partial pressure P (sub w) the GPS measurement, (between 0.5 and 1.5 km), its self-calibration, and it's nearly all-weather capabilities make it a good candidate for use in data assimilation systems (DAS) and numerical weather prediction (NWP). In order to demonstrate its usefulness in a DAS or NWP system, a first step is to assess its impact oil the analysis. A one-dimensional variational off-line analysis (1DVAR), meaning the data are not assimilated 'In the 3D DAS, constitutes a starting approach to which further enhancements can be made. The chosen observable to be analyzed in this study is the refractivity. One way to extract temperature (humidity) from the refractivity, is to assume a humidity (temperature) profile. One variable may then be retrieved without any a priori information. The 1DVAR approach used here resolves the ambiguity problem raised in the interpretation of these data. It enables retrieving these two atmospheric variables at a reasonable computing cost.

Poli, Paul↗
NASA NTRSDate not supplied

Ice-Over-Water Cloud Identification in an Artificial Neural Network Approach

An artificial neural network (ANN) algorithm, employing several Aqua MODIS channels, the retrieved cloud phase and total cloud visible optical depth, and temperature and humidity vertical profiles is trained to detect multilayer (ML) ice-over-water cloud systems identified by matched 2008 CloudSat and CALIPSO (CC) data. The trained MLANN was applied to 2009 MODIS data resulting in combined ML and single layer detection accuracies of 87% (89%) and 86% (89%) for snow-free (snow-covered) regions during the day and night, respectively. When corrected for the viewing-zenith-angle dependence of each parameter, the ML fraction detected is relatively invariant across the swath. Compared to the CC ML variability, the MLANN is robust seasonally and interannually, and produces similar distribution patterns over the globe, except in the polar regions. Additional research is needed to conclusively evaluate the VZA dependence and further improve the MLANN accuracy. This approach should greatly improve the monitoring of cloud vertical structure using operational passive sensors.

MODIS↗
NASA NTRSDate not supplied

AMSR-2 Daily Snow Depth Data Product Using a Neural Network Algorithm Trained by Collocated ICESat-2 Measurements

By using diffusion theory and Monte Carlo lidar radiative transfer simulations, Hu 1 et al. (2022b) has derived snow depth from the first-, second- and third-order moments of the lidar backscattering pathlength distribution. Lu 2 et al. (2022,2024) calculated the snow depth by applying the methods to the satellite ICESat-2 lidar measurements over the Arctic sea ice, as well as land surfaces of Northern Hemisphere. In this paper, a neural network (NN) algorithm, employing several channels from AMSR-2 and the humidity vertical profiles GMAO GEOS-IT, is trained to determine snow depth identified by time and geolocation matched 2019 ICESat-2 snow-depth data during winter months over the Arctic sea ice. The trained NN snow-depth was applied to 2014-2020 AMSR-2 clear pixel data, although the algorithms perform reasonably well in thinner clouds. This paper used AMSR-2 data, a passive microwave instrument to generate a wide range of snow depth data, covering extensive spatial areas in the cross-orbit direction.

Neural Network↗
NASA NTRSDate not supplied

Snow Depth from AMSR-2 Using Multispectral Satellite Data in an Artificial Neural Network

By using diffusion theory and Monte Carlo lidar radiative transfer simulations, Hu et al. (2022b) has derived snow depth from the first-, second- and third-order moments of the lidar backscattering pathlength distribution. Lu et al. (2022) calculated the snow depth by applying the methods to the satellite ICESat-2 lidar measurements over the Arctic sea ice, as well as land surfaces of Northern Hemisphere. In this paper, an artificial neural network (ANN) algorithm, employing several channels from Advanced Microwave Scanning Radiometer 2 (AMSR-2) and the humidity vertical profiles from Global Modeling and Assimilation Office (GMAO) Goddard Earth Observing System for Instrument Teams (GEOS-IT) product, is trained to determine snow depth identified by time and geolocation matched 2019 ICESat-2 snow-depth data during winter months over the Arctic sea ice. The trained ANN snow-depth was applied to 2018 AMSR-2 clear pixel data, although the algorithms perform reasonably well in thinner clouds. The validation data (different from the training set) of ANN snow depth from AMSR-2 showed a good agreement with time matched and co-located snow-depth values from ICESat-2. The bias was near zero, with mean absolute error (MAE) 0.05 cm and a root-mean-square-error (RMSE) 0.08 cm. Prior applying the trained ANN snow depth to AMSR-2 data, a cloud screening algorithm was developed with a similar approach. A separate ANN cloud mask was trained to determine an AMSR-2 pixel is clear or cloudy with time and geolocation matched 2015 CALIOP Vertical Feature Mask (VFM) over Arctic sea ice. The ANN cloud mask from AMSR-2 under-estimated cloud fraction by 3-6% compared to CALIOP . The additional research is needed to conclusively evaluate the ANN cloud mask accuracy. Finally, this paper will lay the foundation for a sustained long-term snowfall and snow-storm monitoring system. The future Cloud Aerosol LIdar for Global scale Observations of the ocean-Land Atmosphere system (CALIGOLA) mission will provide a means to calculate snow depth from the lidar backscattering pathlength distribution, benefiting from the UV, visible and infrared pulses. With the calculated snow depth as the truth one could develop a machine learning algorithm, as it was done in this paper, using a passive microwave instrument available at that time to generate a wide range of snow depth data, covering extensive spatial areas in the cross-orbit direction.

Neural Network↗