Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Positive Charge in the Outer Coordination Sphere of an Artificial Enzyme Increases CO 2 Hydrogenation

The protein scaffold around the active site of enzymes is known to influence catalytic activity, but specific scaffold features responsible for favorable influences are often not known. This study focuses on using an artificial metalloenzyme to probe one specific feature of the scaffold, the position of a positive charge in the outer coordination sphere around the active site. Previous work showed that a small molecular complex, [Rh(P Et 2 N glycine P Et 2 )2 ] – , immobilized covalently within a protein scaffold was activated for CO 2 hydrogenation. In this work, using an iterative design where the effect of arginine, histidine, or lysine residues placed in the outer coordination sphere of the catalytic active site were evaluated, we tested the hypothesis that positively charged groups facilitate CO 2 hydrogenation with seven unique constructs. Single-, double-, and triple-point mutations were introduced to directly compare catalytic activity, as monitored by turnover frequencies (TOFs) measured in real time with 1 H NMR spectroscopy, and evaluate related structural and electronic properties. Two of the seven constructs showed a 2- and 3-fold increase relative to the wild type, with overall rates ranging from 0.2 to 0.7 h –1 , and a crystal structure of the fastest of these shows the positive charge positioned next to the active site. A crystal structure of the arginine-containing complex shows that the arginines are positioned near the metal. Molecular dynamics (MD) studies also suggest that the positive charge is oriented next to the active site in the two constructs with faster rates but not in the others and that the positive charge near the active site holds the CO 2 near the metal, all consistent with a positive charge appropriately positioned in the scaffold benefiting catalysis. The MD studies also suggest that changes in the water distribution around the active site may contribute to catalytic activity, while modest structural changes and movement of the complex within the scaffold do not.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Understanding the Surface Structure and Catalytic Activity of SnO x /Au(111) Inverse Catalysts for CO 2 and H 2 Activation

Carbon dioxide hydrogenation is a promising approach for the reduction of greenhouse gas pollution via the production of fuels and high-value chemicals utilizing C1 chemistry. In this process, the activation of nonpolar molecules, CO 2 and H 2 , at mild conditions is challenging. In this study, we report a well-defined inverse SnO x /Au(111) catalyst that shows the ability to activate both CO 2 and H 2 at room temperature. Scanning tunneling microscopy (STM) and ambient pressure X-ray photoemission spectroscopy (AP-XPS) are combined to understand the surface structure, growth mode, chemical state, and activity of SnO x /Au(111) surfaces. Nanostructures of SnO x at the sub-monolayer level were prepared by depositing Sn on Au(111) followed by O 2 oxidation. For the as-prepared SnO x /Au(111), two-dimensionally formed SnO x thin films on a Au(111) substrate were observed with STM of two different moieties, discernible based on their height: clusters (~0.4 Å) and nanoparticles (NPs, 1–2.5 Å), which are assigned to Sn–Au alloys and SnO x , respectively, in corroboration with XPS analysis. Furthermore, SnO x /Au(111) was annealed under UHV to test its thermal stability. Upon annealing at 400–600 K, a disappearance of SnO x NPs and reappearance of highly dispersed Sn clusters were clearly noticeable from the STM and XPS results, identifying the thermal decomposition of SnO x and subsequent formation of Sn–Au alloys on the surface due to the recombination of Sn clusters with Au. We investigated the reactivity of the SnO x /Au(111) surfaces toward CH 4 , CO 2 , and H 2 . The SnO x /Au(111) surfaces have excellent CO 2 and H 2 activation abilities even at room temperature with negligible reactivity for methane activation. Our AP-XPS results show that H 2 can be activated on the SnO x NPs by the reduction to Sn. For CO 2 , the activation and further dissociation are identified by a reoxidation of Sn with newly formed Sn–O bonds and the formation of surface carbon. Therefore, we propose that SnO x is a potential catalyst or additive to achieve CO 2 hydrogenation under mild conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heterogenization of Homogeneous Ruthenium(II) Catalysts for Carbon-Neutral Dehydrogenation of Polyalcohols

Liquid organic hydrogen carrier (LOHC) systems are an excellent alternative to pressurized gas and liquid hydrogen storage technologies due to their high volumetric storage capacities and straightforward adaptation to existing infrastructure. Homogeneous catalysts are promising for the selective and reversible release of hydrogen from LOHC. However, separation from product mixtures and recycling inhibit their use, particularly when comprised of costly low-abundance elements, motivating the development of heterogeneous versions that are more easily recovered and reused. Here, we describe two methods for the heterogenization of molecular Ru catalysts that efficiently dehydrogenate the polyalcohol LOHCs ethylene glycol (EG) and 1,2-propanediol (1,2-PDO). The heterogeneous versions of these catalysts maintain catalytic activity for hydrogen production comparable to the homogeneous complexes, with up to 81% conversion and 99% selectivity. Further, DFT modeling indicates mechanistic similarities for the dehydrogenations of EG and 1,2-PDO, with the rate-limiting steps associated with protonation of the Ru–H bond to form H 2 and the alkoxide species coordinated to Ru(II), followed by β-hydride elimination to regenerate the Ru–H bond. Overall, the data suggest these heterogenized molecular catalysts have potential for practical use in polyalcohol-based LOHC systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis and Characterization of [Ni(H 2 O)(7-P Ph 2 N ArSO3 ) 2 ](NaBF 4 ) for Light-Driven Quantum Dot-Catalyst Hydrogen Evolution

Light-driven hydrogen generation from water is a route to carbon-neutral fuels. However, the integrated light absorbers and catalysts must be compatible and functional under the same conditions. A sulfate-functionalized complex, [Ni(H 2 O)(7-P Ph 2 N ArSO3 ) 2 ](NaBF 4 ), where P Ph 2 N ArSO3 = 4-(3,6-diphenyl-1,3,6-azadiphosphepan-1-yl)benzenesulfonate), was synthesized and characterized. A solid-state structure from single-crystal X-ray crystallography is also reported. The electrocatalytic activity for hydrogen evolution of this complex in 7:3 H 2 O:CH 3 CN was characterized by cyclic voltammetry and controlled potential electrolysis, with a maximum observed rate of 83 s –1 . Density functional theory was used to characterize the favorable binding of the sulfate functionalities to cadmium sulfide quantum dots. Experimental assembly of these catalysts onto cadmium sulfide quantum dots was successful. In conclusion, both fast electron transfer and light-driven pH-dependent hydrogen evolution were observed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Neutron diffraction reveals protonation states in pyridoxal‐5′‐phosphate‐free and glycine external aldimine‐bound serine hydroxymethyltransferase

Serine hydroxymethyltransferase (SHMT) is a critical enzyme in the one-carbon (1C) metabolism pathway catalyzing the reversible conversion of L-Ser into Gly and concurrent transfer of 1C unit to tetrahydrofolate (THF) to give 5,10-methylene-THF (5,10-MTHF), which is used in the downstream syntheses of biomolecules critical for cell proliferation. The cellular 1C metabolism is hijacked by many cancer types to support cancer cell proliferation, making SHMT a promising target for the design and development of novel small-molecule antimetabolite chemotherapies. To advance structure-assisted drug design, knowledge of SHMT catalysis is crucial, but can only be fully realized when the atomic details of each reaction step governed by the acid–base catalysis are elucidated by visualizing active site hydrogen atoms. Here, we used room-temperature neutron crystallography to directly determine protonation states in Thermus thermophilus SHMT (TthSHMT), capturing protomer A in the apo form lacking the coenzyme pyridoxal 5′-phosphate (PLP), and protomer B as a ternary complex with PLP–Gly-external aldimine and (6S)-5-methyltetrahydrofolate (5MTHF). We observed protonation of the Schiff base nitrogen in PLP–Gly and neutrality of the catalytic Lys226 side chain in the ternary complex, whereas Lys226 is protonated and positively charged in the apo-active site. Furthermore, we obtained an X-ray structure of TthSHMT in complex with the substrate THF, which binds identically as 5MTHF at the peripheral binding site. In conclusion, the unique structural and functional information provided by neutron crystallography, in combination with X-ray structures, can be employed in the rational design of SHMT inhibitors.

X-ray crystallography↗
DOE OSTI2022

Nitrogen-doped carbon for selective pseudo-metal-free hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran: Importance of trace iron impurity

Heteroatoms-doped carbon materials have recently emerged as effective catalysts for various chemical and electrochemical reactions. The free of metals especially noble metals reduces cost and eliminates issues like sintering or leaching of metals at elevated temperatures in solvents. In this work, selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is for the first time achieved over simple nitrogen-doped carbon (N-C) catalysts. Further, at optimal reaction conditions, a 91% yield of DMF is obtained with excellent catalyst stability. Extensive characterization, including extended X-ray absorption fine-structure (EXAFS) and soft X-ray absorption spectroscopy (sXAS), model reactions, basic data science analysis, and DFT calculations suggest that ppm of Fe in particular FeN 3 sites formed in pyrolysis, rather than non-metallic elements, drive key steps such as H 2 activation and deoxygenation of –OH during HMF HDO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing Electrode Transformation under Dynamic Operation for Alkaline Water Electrolysis

Alkaline water electrolyzers (AWEs) play a pivotal role in the realm of large-scale hydrogen production. However, AWEs face significant challenges in electrode degradation particularly under dynamic operating conditions, induced by reverse current phenomenon during frequent startup/shutdown. Herein, this study aims to rationalize the degradation mechanisms of AWEs under these conditions. A three-electrode membrane electrode assembly (MEA) setup is first utilized to decouple polarization behaviors of anode and cathode in AWEs. Following a proposed accelerated stress testing protocol, the setup allows for tracking individual electrode performance transformations during frequent reverse current operation. Integrating operando cell studies with in situ and post-mortem characterizations, it is showed that continuous formation of highly active species, nickel (oxy)hydroxides, improves the anode performance for oxygen evolution reaction. On the contrary, irreversible oxidation of nickel to β-nickel hydroxide results in a severe degradation of cathode, leading to material dissolution, poor electrical conductivity and loss of catalytic activity for hydrogen evolution reaction. These results provide insights in nickel-based electrode transformation mechanisms for alkaline water electrolysis and indicate that cathode with higher redox reversibility can potentially improve durability of AWEs under dynamic conditions.

08 HYDROGEN↗
DOE OSTI2020

The 2020 plasma catalysis roadmap

Abstract Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO 2 conversion into value-added chemicals and fuels, CH 4 activation into hydrogen, higher hydrocarbons or oxygenates, and NH 3 synthesis. Other applications are already more established, such as for air pollution control, e.g. volatile organic compound remediation, particulate matter and NO x removal. In addition, plasma is also very promising for catalyst synthesis and treatment. Plasma catalysis clearly has benefits over ‘conventional’ catalysis, as outlined in the Introduction. However, a better insight into the underlying physical and chemical processes is crucial. This can be obtained by experiments applying diagnostics, studying both the chemical processes at the catalyst surface and the physicochemical mechanisms of plasma-catalyst interactions, as well as by computer modeling. The key challenge is to design cost-effective, highly active and stable catalysts tailored to the plasma environment. Therefore, insight from thermal catalysis as well as electro- and photocatalysis is crucial. All these aspects are covered in this Roadmap paper, written by specialists in their field, presenting the state-of-the-art, the current and future challenges, as well as the advances in science and technology needed to meet these challenges.

Bogaerts, Annemie (ORCID:0000000198756460)↗
DOE OSTI2022

Multiphysics modeling of SOFC performance degradation caused by interface delamination and active layer cracking

In solid oxide device operation, delamination and cracking cause more catastrophic damage to cell life than other degradation mechanisms, leading to more rapid cell failure. The electrochemical performance degradation caused by electrode/electrolyte interface delamination and active layer cracking were investigated through in-house developed three-dimensional multiphysics simulations. Here the multiphysics simulations, fully calibrated against experimental datasets for button cells in a previous study, were extended to quantitatively investigate the effects of electrode/electrolyte interface delamination and active layer cracking. The simulated polarization curves and impedance behavior with various levels of delamination and cracking provided insights of the performance degradation. Furthermore, the local current distributions within the cell were analyzed for three different operating modes: constant voltage, constant current, and constant power. Finally, a practical strategy was proposed to mitigate the performance degradation in the realistic cell operations, extending overall cell lifetime.

08 HYDROGEN↗
DOE OSTI2021

Selective cysteine-to-selenocysteine changes in a [NiFe]-hydrogenase confirm a special position for catalysis and oxygen tolerance

Significance Substitution of cysteine by selenocysteine is held responsible for the increased performance of many enzymes: The higher activity of [NiFeSe]-hydrogenases compared with their [NiFe] counterparts is often attributed to the Sec replacement of one active-site cysteine ligand. Replacing each of the four active-site cysteine residues in an O 2 -tolerant [NiFe]-hydrogenase by selenocysteine shows that this substitution alone does not overcome the inability to evolve H 2 that is a characteristic of the group 1d hydrogenases. A nonbridging cysteine lying on the direct path between the Ni and an adjacent proton-relaying glutamic acid emerges as being very special: Its substitution by selenocysteine confers extreme tolerance to O 2 but disrupts the proton transfer pathway, providing an example of where sulfur is superior to selenium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

E-Tunnel Wastewater Discharge Permit Quarterly Monitoring Report

Monitoring and sampling activities are performed at the E-Tunnel Wastewater Disposal System (ETDS) in accordance with the requirements of Water Pollution Control (WPC) Permit NEV 96021, Revision 1, which is effective October 1, 2013. Although the end date of the WPC permit is September 21, 2018, provided Nevada Division of Environmental Protection (NDEP), in a letter date September 21, 2018, provided guidance that indicated the WPC Permit NEV 96021, Revision 1, is in effect until NDEP notifies the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office otherwise. This QMR includes the results of monthly inspections and monitoring for April, May, and June 2020. Monthly inspections and monitoring were conducted on April 21, May 28, and June 24 2020. Inspections include a visual assessment of the berms, ponding, water levels relative to the overflow pipes, tunneling or burrowing into the berms, seeps at the toe of the berms, deep-rooting botanicals on the berms, and fencing. Monthly monitoring includes measurements of the instantaneous flow rate, hydrogen ion activity (pH), and specific conductance of the ETDS discharge.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

E-Tunnel wastewater discharge permit quarterly monitoring report. Water pollution control permit Nev 96021, third quarter 2020

Monitoring and sampling activities are performed at the E-Tunnel Wastewater Disposal System (ETDS ) in accordance with the requirements of Water Pollution Control (WPC) Permit NEV 96021, Revision 1, which is effective October 1, 2013. Although the end date of the WPC permit is September 30, 2018, the Nevada Division of Environmental Protection (NDEP), in a letter dated September 21, 2018, provided guidance that indicated the WPC Permit NEV 96021, Revision 1, is in effect until NDEP notifies the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office otherwise. This QMR includes the results of monthly inspections and monitoring for July, August, and September 2020. Monthly inspections and monitoring were conducted on July 21, August 19, and September 16, 2020. Inspections include a visual assessment of the berms, ponding, water levels relative to the overflow pipes, tunneling or burrowing into the berms, soil conditions on and around the berms, erosion or sloughing of the slopes of the berms, seeps at the toe of the berms, deep-rooting botanicals on the berms, and fencing. Monthly monitoring includes measurement s of the instantaneous flow rate, hydrogen ion activity (pH), and specific conductance of the ETDS discharge. The report will be submitted to the State of Nevada.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Microkinetic simulation and fitting of the temperature programmed reaction of methanol on CeO 2 (111): H 2 and H 2 O + V production

The kinetics and mechanism for temperature programmed reaction following adsorption of an adsorbate can be better understood by simulation and fitting with comparison to experiment. A case study is presented here for the chemistry of adsorption of methanol on a CeO 2 (111) surface followed by heating. The gas products observed are CH 3 OH, CH 2 O, H 2 , H 2 O, CO, CO 2 . At low temperatures (< 500 K), there is formation of H 2 and H 2 O, where the H 2 O formation is accompanied by lattice oxygen vacancy (V) formation and is thus important in determining the selectivity towards different products. Microkinetic modeling was performed using a recently published method for fitting to gain mechanistic knowledge of the H 2 and H 2 O + V formation at < 500 K. In the kinetic models used here, most of the H 2 and H 2 O + V V formation can be explained by a mechanism in which a metastable state of hydrogen on the surface (H*) acts as an intermediate. Two possibilities were investigated for the source of the metastable H* intermediate: H* from CH bond breaking of methoxies, or promotion of H+ to H* via electron transfer from ionic methoxies absorbed in oxygen vacancies (CH 3 O - /V). From this study, we consider the latter to be more likely at < 500 K. For the H 2 O formation, it was found to be critical that H 2 O cannot dissociate directly on oxygen vacancies. Finally, catalytic chemistry was observed in simulations, including catalytic formation of oxygen vacancies. Various features of the experimental results were reproduced, including methoxies being the major carbon containing species on the surface at < 500 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Modifications of Crystalline Poly(triazine imide) for Advancing Its Structure–Property Relationships in Light-Driven Catalysis

Carbon-nitride materials represent light-absorbing structures composed of earth-abundant elements capable of being leveraged for semiconductor photocatalysis at their surfaces. This study systematically investigates the addition of molecular modifiers to the synthesis of crystalline carbon nitrides to assess their effects on the materials’ structure, optical bandgap, and photocatalytic activity for hydrogen (H 2 ) and oxygen (O 2 ) evolution under ultraviolet and visible-light irradiation. Melamine and five pyrimidine-centered analogs were employed as building blocks to modify various heteroatoms within the polymeric framework. The modified materials were characterized with attention to the differences introduced by the monomeric modifiers and their influence on the resulting structures and compositions. The findings indicate that these changes significantly broaden the visible-light absorption range, albeit with the gradual loss of the bulk crystalline structure. As the loading of modifiers increased beyond 50%, a predominantly amorphous form of carbon nitride emerged. XPS, 13 C solid-state NMR, and SEM analyses corroborated the changes, which were attributed to modifications of the elemental composition and a reduced amount of Li cations and charge-balancing Cl anions owing to fewer binding sites in the intralayer cavities. In photocatalytic measurements under an ultraviolet 390 nm LED, and aided by photodeposited nanoparticle cocatalysts, the unmodified PTI-LiCl framework demonstrated the highest H 2 evolution rate (HER; 3.44 mmol·g –1 ·h –1 ) with an apparent quantum yield of 5.4%, along with total water splitting at rates of 163 μmol of H 2 ·g –1 ·h –1 and 75.6 μmol·O 2 g –1 ·h –1 . While PTI-LiCl showed trace activity under a visible-light 440 nm LED, all modified materials exhibited enhanced reactivity with as low as 5% molecular modifiers. The photocatalytic rates peaked at a 15% modification level when using 2,4,6-triaminopyrimidine, with rates of 33 μmol·g –1 ·h –1 for HER, along with 19.7 μmol of H 2 ·g –1 ·h –1 and 8.7 μmol of O 2 ·g –1 ·h –1 for total water splitting. Density functional theory calculations were used to probe electronic structure changes resulting from the modifications. Furthermore, these results elucidate the structural, optical, and electronic changes arising from the five selected molecular modifiers and their impact on the semiconductors’ photocatalytic properties.

Electrical conductivity↗
DOE OSTI2024

Initial Laboratory Measurements Probing Hydrogen Interactions with Eagle Ford Shale and Pyrite: Potential Implications for Subsurface Hydrogen Storage

Hydrogen (H 2 ) has the potential to be a transformative technology as an enabler to a low-carbon future and promoter of renewable energy. When H 2 is injected and stored in the subsurface, it has the potential to interact with the caprock (usually shale) which overlies and seals the storage reservoir. Here, this study examines geochemical reactions or changes in surface morphology to Eagle Ford Shale, a proxy for caprock, upon exposure to H 2 at 50°C and 10.3 MPa. Reactions were also performed with N 2 to provide an experimental control. Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), Atomic Force Microscopy (AFM), and Optical Photothermal-Infrared (O-PTIR) Spectroscopy were applied to quantify changes on the microscale and nanoscale level. Fluid chemistry changes were monitored with Ion Chromatography (IC) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Exposure of Eagle Ford Shale to H 2 gas alone did not result in any alterations to the shale chemically or any changes in the surface morphology. Exposure of Eagle Ford Shale to both H 2 and water as well as N 2 and water resulted in changes to the surface morphology because of gypsum dissolution and reprecipitation, thus indicating that H 2 is not necessary to promote changes. Pure pyrite was the most reactive with H 2 possibly resulting in a reduction to pyrrhotite. These initial studies suggest that the extent of reactions activated by hydrogen with caprock are minor under the temperature and pressure conditions that would represent underground hydrogen storage.

08 HYDROGEN↗
DOE OSTI2024

Regulation of Electron Cloud Density by Electronic Effects of Substituents to Optimize Photocatalytic H 2 Evolution of Carbon Dots

Carbon dots (CDs) have a wide light absorption range, which are promising candidates for photocatalytic water splitting H 2 evolution, but they show low activity for hydrogen evolution reaction (HER) due to the slow transfer efficiencies of photogenerated carriers. The electron cloud density of photocatalyst is essential for the separation and migration of photogenerated carriers. In this study, the effect mechanism of electron cloud density regulated by the substituents with different electronic effects on the photocatalytic HER of glucose-based CDs is clarified. CDs-SO 3 H and CDs-OH are first obtained by introducing electron-drawing group (–SO 3 H) and electron-donating group (–OH) using a tailoring post-processing strategy. Experimental results show that the H 2 yield catalyzed by CDs-SO 3 H is 89.95 µmol•g –1 in 4 h, which is about four times that of CDs, and 7.4 times that of CDs-OH. The –SO 3 H induces a much negative energy band and high electron cloud density on CDs edges, promoting the separation and transfer of photogenerated carriers; while the CDs-OH exhibits a high positive charge density and an upward energy band, hindering the surface complexation of electron-hole pairs and HER. Furthermore, this study will provide an insight into the design of CDs catalysts with efficient photocatalytic HER at a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Optimization of a Packed Particle Magnetocaloric Refrigerator: A Combined Experimental and Theoretical Study

Magnetocaloric refrigeration has strong potential towards achieving high efficiency hydrogen liquefaction. Optimising parameters such as particle size and operating cycles can have a significant impact on liquefaction performance. Here, this work reports on a room temperature magnetocaloric refrigeration prototype designed with helium as the heat transfer fluid and packed particle Gd 0.8875 Ce 0.1025 Si 0.84 Cr 0.19 as the refrigerant. The temperature spans and cooling power with three different particle sizes at two different operating cycles were measured. A maximum temperature span of 16.7 K and a maximum cooling power of 8.6 W·kg –1 were obtained. Reduction of performance in the faster cycle was observed in larger particles due to insufficient thermal diffusion time and its implications for cryogenic temperatures are discussed. A numerical model was developed based on the experimentally observed variation of the temperature span and cooling power with particle size and cycle duration. This model was then used to study the competing effects of viscous dissipation and thermal diffusion for different particle sizes and cycle durations.

08 HYDROGEN↗