Search NASA⌕ Search

SEARCH · Search NASA

Results for “impact ionization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Volcanic control of the Io atmosphere and neutral and plasma torus

Rate equations for the column density of Io's atmosphere and the number density of neutral atoms and ions in the torus have been formulated in terms of surface sublimation and venting of volcanic gases, sputtering efficiency, thermal escape, and the plasma processes that take place in the torus which included electron impact ionization, charge exchange, and transport. In the limit of low volcanic activity, estimates of the densities can be obtained, and the baseline configuration that would exist in the absence of volcanic activity is found. Solution of the coupled steady state rate equations shows that the densities are sensitive, to a varying degree, to the level of Io volcanism. The steady state densities predicted by the model are consistent with a volcanic flux of no more than 10 to the 12th/sq cm per sec. This is significantly lower than the values obtained on the basis of resurfacing rates and appears to imply that surface lava flows play a major role in the resurfacing process.

Eviatar, Aharon↗
NASA NTRS1988

Laboratory studies of sticking coefficients and heterogeneous reactions important in the Antarctic stratosphere

Laboratory studies of sticking coefficients of H2O, HCl, Cl2, and HNO3 on ice and heterogeneous reactions of ClONO2 with ice or HCl/ice have been performed in a fast flow reactor. A quadrupole mass spectrometer with electron impact ionization was used as a detector. Measured sticking coefficients are: 0.3 (+0.7, -0.1) for H2O, 0.4 (+0.6, -0.2) for HCL, less than 0.0001 for Cl2, and 0.3 (+0.7, -0.1) for HNO3 at 200 K. The reaction probability of ClONO2 on ice was found to be 0.06 (+ or - 0.03) while HOCl was observed as a sole product in the gas phase. With HCl present in ice, the reaction probability of ClONO2 is greatly enhanced, approaching 0.27 (+0.73, -0.13) while molecular chlorine was found to be the major product in the gas phase. Another reaction product was nitric acid which remained in the solid phase. Since the polar stratospheric clouds contain ice particles or possibly HCl/ice particles on the surface, the present results should be a major factor in producing the observed springtime ozone depletion in the Antarctic stratosphere.

Leu, Ming-Taun↗
NASA NTRS1988

Comparison of vibration dissociation coupling and radiative heat transfer models for AOTV/AFE flowfields

A series of detailed studies comparing various vibration dissociation coupling models, reaction systems and rates, and radiative heating models has been conducted for the nonequilibrium stagnation region of an AFE/AOTV vehicle. Atomic and molecular nonequilibrium radiation correction factors have been developed and applied to various absorption coefficient step models, and a modified vibration dissociation coupling model has been shown to yield good vibration/electronic temperature and concentration profiles. While results indicate sensitivity to the choice of vibration dissociation coupling model and to the nitrogen electron impact ionization rate, by proper combinations accurate flowfield and radiative heating results can be obtained. These results indicate that nonequilibrium effects significantly affect the flowfield and the radiative heat transfer. However, additional work is needed in ionization chemistry and absorption coefficient modeling.

Carlson, Leland A.↗
NASA NTRS1988

Constraints on the neutral hydrogen corona at Uranus from its interaction with magnetospheric plasma

Models of collisional reactions between the hot (several keV) protons and neutral atomic hydrogen corona observed at Uranus by Voyager 2 are compared with observations in order to deduce constraints on the coronal density. An upper limit is found for n sub H (5R sub U) of several tens of H/cu cm on the sunward side of Uranus and several H/cu cm on the dark side. The possibility that the hot plasma population might arise from photoionization and electron impact ionization of coronal and interstellar medium hydrogen in the magnetotail, followed by pickup and energization while convecting toward Uranus, is examined and rejected.

Herbert, Floyd↗
NASA NTRS1988

Constraints on Titan's ionosphere

The near flyby of Saturn's moon Titan by Voyager 1 revealed a Venus-like interaction between the moon and Saturn's magnetospheric plasma. Although neither the radio science experiment occultation observation nor the in-situ measurements directly detected the ionosphere, plasma of ionospheric origin was observed as Voyager 1 passed through Titan's wake. Balancing the magnetic pressure in this low-beta region of Saturn's magnetosphere with ionospheric particle pressure yields an upper limit on the ionospheric density. Using an ionospheric temperature equal to the exospheric temperature of 200 K yields a charge density of about 3000/cu cm, which is consistent with the peak ionospheric electron density inferred from a balance of electron impact ionization of molecular nitrogen and recombination loss. Both of these quantities are consistent with limits derived from Voyager 1 observations. Good constraints on these quantities are important in planning the Cassini mission to orbit Saturn and probe Titan's ionosphere and atmosphere at the beginning of the next century.

Mcnutt, Ralph L., Jr.↗
NASA NTRS1989

Alternating gradient photodetector

A far infrared (FIR) range responsive photodetector is disclosed. There is a substrate of degenerate germanium. A plurality of alternating impurity-band and high resistivity layers of germanium are disposed on the substrate. The impurity-band layers have a doping concentration therein sufficiently high to include donor bands which can release electrons upon impingement by FIR photons of energy hv greater than an energy gap epsilon. The high resistivity layers have a doping concentration therein sufficiently low as to not include conducting donor bands and are depleted of electrons. Metal contacts are provided for applying an electrical field across the substrate and the plurality of layers. In the preferred embodiment as shown, the substrate is degenerate n-type (N++) germanium; the impurity-band layers are n+ layers of germanium doped to approximately the low 10(exp 16)/cu cm range; and, the high resistivity layers are n-layers of germanium doped to a maximum of approximately 10(exp)/cu cm. Additionally, the impurity-band layers have a thickness less than a conduction-electron diffusion length in germanium and likely to be in the range of 0.1 to 1.0 micron, the plurality of impurity-bands is of a number such that the flux of FIR photons passing therethrough will be substantially totally absorbed therein, the thickness of the high resistivity layers is such compared to the voltage applied that the voltage drop in each the high resistivity layers controls the occurence of impact ionization in the impurity-band layers to a desired level.

Overhauser, Albert W.↗
NASA NTRS1990

Spacecraft charging during ion beam emissions in sunlight

During ion beam emissions from the SCATHA satellite, the potential of the negatively charged satellite body shows a sinusoidal oscillation frequency of once-per-spin of the satellite. The minimum occurs when the ion beam is sunward. The processes that may be responsible for the voltage modulation are considered. Neutralization of ion beam space charge by photoelectrons is examined. The photoelectrons are accelerated by the negative potential of the satellite. Effects of electron impact ionization, excitation of metastable states, and photoionization of xenon neutral atoms in the ion beam are studied in detail. Critical ionization velocity interaction is unlikely under the condition considered.

Lai, S. T.↗
NASA NTRS1992

The solar wind interaction with Venus

The Pioneer Venus Orbiter (PVO) mission has played a key role in establishing the nature of the solar wind interaction with Venus. Although earlier probes had determined that Venus presented an obstacle much smaller than the size of earth's magnetosphere to the solar wind, they did not carry out in situ measurements pertaining to solar wind interaction studies at low enough altitudes to determine why. They also did not provide datasets of sufficient duration to study the variability of the interaction of both short (one day) and long (solar cycle) timescales. The first 600 of the nearly 5000 orbits of PVO magnetometer data have been used to determine a very low upper limit on the intrinsic dipolar magnetic moment of Venus. The consequence of that low magnetic moment is that the solar wind interacts directly with the upper atmosphere and ionosphere. Relative to a dipolar field obstacle, the ionospheric obstacle is rather incompressible. A bow shock is observed to stand in front of the nearly Venus-sized ionospheric obstacle at a comparatively steady subsolar altitude of approximately 1.5 R(v) (Venus radii). This shock decelerates the supersonic solar wind plasma so that it can flow around the obstacle. It was found to change its average position in the terminator plane from about 2.4 R(v) to 2.1 R(v) as the solar cycle progressed from the 1978 orbit insertion near solar maximum through the 1986-87 solar minimum, and back again during the latest solar activity increase. Between the bow shock and the ionosphere proper, the slowed solar wind plasma flow diverges near the subsolar point and makes its way across the terminator where it reaccelerates and continues anti-Sunward. The solar wind magnetic field, which is in effect frozen into the flowing plasma, is distorted in this 'magnetosheath' region so that it appears to hang up or drape over the dayside ionosphere before it slips around with the flow. These features of the solar wind interaction are also seen when the obstacle is a dipole magnetic field, but there are two important distinctions. In the wake of the Venus obstacle one finds an induced magnetic tail composed of varying interplanetary fields rather than the constant fields of intrinsic origin. This magnetotail is further seen to be populated by Heavy (0+) ions that are evidently escaping from the planet at significant (approximately 10(exp -25) s(exp -1)) rates. These heavy ions are also observed in the dayside magnetosheath. The interpretation is that ions are produced by both photoionization and solar wind electron impact ionization of the upper neutral atmosphere that extends into the magnetosheath.

Luthmann, J. G.↗
NASA NTRS1995

One-dimensional hybrid satellite track model for the Dynamics Explorer 2 (DE 2) satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. (1985) satellite track code but also includes elements of Roble et al. (1987b) global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the Mass Spectrometer Incoherent Scatter 1990 (MSIS-90) model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule heating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗
NASA NTRS1994

A model of Triton's role in Neptune's magnetosphere

Escape of neutral hydrogen (H) and nitrogen (N) from Triton's maintains a large neutral cloud, called the Triton torus, in Neptune's magnetosphere. We have developed the first detailed Monte Carlo simulation model of the Triton torus that includes the collisionality, the complex geometry, the injection of two neutral species from Triton (H and N), and the combined effects of photoionization, electron impact ionization, and charge exchange. Ionization in Neptune's plasma sheet was modeled using Voyager plasma observations. Collisions cause both the H and N neutral clouds to become more radially extended, both toward Neptune and out beyond the magnetopause, as well as more extended in latitude, when compared with collisionless models. Moreover, collisions of H with the much more massive N greatly enhance the collisional ejection of H from the system and into Neptune's atmosphere. This effect decreases the probability of H ionization within the magnetosphere relative to that for N, and furthermore causes model results for two-species injection from Triton to differ significantly from those for H injection alone. For a hydrogen escape rate from Triton of 5 x 10(exp 25)/s, as given by photo-chemical models of Triton's upper atmosphere, a nitrogen escape rate of 5 x 10(exp 24)/s gives proton and N(+) sources of 5.6 x 10(exp 24)/s and 3.3 x 10(exp 24)/s, respectively, whose ratio is close to the observed ratio of protons to heavies. A nitrogen escape rate of 2 x 10(exp 25)/s, yields an N(+) source more than twice that of protons, inconsistent with the Voyager data.

Decker, R. B.↗
NASA NTRS1995

Gain properties of doped GaAs/AlGaAs multiple quantum well avalanche photodiode structures

A comprehensive characterization has been made of the static and dynamical response of conventional and multiple quantum well (MQW) avalanche photodiodes (APDs). Comparison of the gain characteristics at low voltages between the MQW and conventional APDs show a direct experimental confirmation of a structure-induced carrier multiplication due to interband impact ionization. Similar studies of the bias dependence of the excess noise characteristics show that the low-voltage gain is primarily due to electron ionization in the MQW-APDS, and to both electron and hole ionization in the conventional APDS. For the doped MQW APDS, the average gain per stage was calculated by comparing gain data with carrier profile measurements, and was found to vary from 1.03 at low bias to 1.09 near avalanche breakdown.

Menkara, H. M.↗
NASA NTRS1994

Electron-Beam Diagnostic Methods for Hypersonic Flow Diagnostics

The purpose of this work was the evaluation of the use of electron-bean fluorescence for flow measurements during hypersonic flight. Both analytical and numerical models were developed in this investigation to evaluate quantitatively flow field imaging concepts based upon the electron beam fluorescence technique for use in flight research and wind tunnel applications. Specific models were developed for: (1) fluorescence excitation/emission for nitrogen, (2) rotational fluorescence spectrum for nitrogen, (3) single and multiple scattering of electrons in a variable density medium, (4) spatial and spectral distribution of fluorescence, (5) measurement of rotational temperature and density, (6) optical filter design for fluorescence imaging, and (7) temperature accuracy and signal acquisition time requirements. Application of these models to a typical hypersonic wind tunnel flow is presented. In particular, the capability of simulating the fluorescence resulting from electron impact ionization in a variable density nitrogen or air flow provides the capability to evaluate the design of imaging instruments for flow field mapping. The result of this analysis is a recommendation that quantitative measurements of hypersonic flow fields using electron-bean fluorescence is a tractable method with electron beam energies of 100 keV. With lower electron energies, electron scattering increases with significant beam divergence which makes quantitative imaging difficult. The potential application of the analytical and numerical models developed in this work is in the design of a flow field imaging instrument for use in hypersonic wind tunnels or onboard a flight research vehicle.

Source record↗
NASA NTRS1995

One-Dimensional Hybrid Satellite Track Model for the Dynamics Explorer 2 (DE 2) Satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. satellite track code but also includes elements of Roble et al. global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the MSIS-90 model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule beating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗
NASA NTRS1996

Three-Dimensional Multiscale MHD Model of Cometary Plasma Environments

First results of a three-dimensional multiscale MHD model of the interaction of an expanding cometary atmosphere with the magnetized solar wind are presented. The model starts with a supersonic and super-Alfvenic solar wind far upstream of the comet (25 Gm upstream of the nucleus) with arbitrary interplanetary magnetic field orientation. The solar wind is continuously mass loaded with cometary ions originating from a 10-km size nucleus. The effects of photoionization, electron impact ionization, recombination, and ion-neutral frictional drag are taken into account in the model. The governing equations are solved on an adaptively refined unstructured Cartesian grid using our new multiscale upwind scalar conservation laws-type numerical technique (MUSCL). We have named this the multiscale adaptive upwind scheme for MHD (MAUS-MHD). The combination of the adaptive refinement with the MUSCL-scheme allows the entire cometary atmosphere to be modeled, while still resolving both the shock and the diamagnetic cavity of the comet. The main findings are the following: (1) Mass loading decelerates the solar wind flow upstream of the weak cometary shock wave (M approximately equals 2, M(sub A) approximately equals 2), which forms at a subsolar standoff distance of about 0.35 Gm. (2) A cometary plasma cavity is formed at around 3 x 10(exp 3) km from the nucleus. Inside this cavity the plasma expands outward due to the frictional interaction between ions and neutrals. On the nightside this plasma cavity considerably narrows and a relatively fast and dense cometary plasma beam is ejected into the tail. (3) Inside the plasma cavity a teardrop-shaped inner shock is formed, which is terminated by a Mach disk on the nightside. Only the region inside the inner shock is the 'true' diamagnetic cavity. (4) The model predicts four distinct current systems in the inner coma: the density peak current, the cavity boundary current, the inner shock current, and finally the cross-tail current. (5) The calculated plasma parameters (magnetic field, plasma density, speed, and temperature) are in very good agreement with published Giotto observations.

Gombosi, Tamas I.↗
NASA NTRS1996

A Comprehensive Analysis of the Physical Properties of Advanced GaAs/AlGaAs Junctions

Extensive studies have been performed on MQW junctions and structures because of their potential applications as avalanche photodetectors in optical communications and imaging systems. The role of the avalanche photodiode is to provide for the conversion of an optical signal into charge. Knowledge of junction physics, and the various carrier generation/recombination mechanisms, is crucial for effectively optimizing the conversion process and increasing the structure's quantum efficiency. In addition, the recent interest in the use of APDs in imaging systems has necessitated the development of semiconductor junctions with low dark currents and high gains for low light applications. Because of the high frame rate and high pixel density requirements in new imaging applications, it is necessary to provide some front-end gain in the imager to allow operation under reasonable light conditions. Understanding the electron/hole impact ionization process, as well as diffusion and surface leakage effects, is needed to help maintain low dark currents and high gains for such applications. In addition, the APD must be capable of operating with low power, and low noise. Knowledge of the effects of various doping configurations and electric field profiles, as well as the excess noise resulting from the avalanche process, are needed to help maintain low operating bias and minimize the noise output.

Menkara, Hicham M.↗
NASA NTRS1995

The Development of a Nonequilibrium Radiative Heat Transfer Computational Model for High Altitude Entry Vehicle Flowfield Methods

This final report will attempt to concisely summarize the activities and accomplishments associated with NASA Grant and to include pertinent documents in an appendix. The project initially had one primary and several secondary objectives. The original primary objective was to couple into the NASA Johnson Space Center (JSC) nonequilibrium chemistry Euler equation entry vehicle flowfield code, INEQ3D, the Texas A&M University (TAMU) local thermodynamic nonequilibrium (LTNE) radiation model. This model had previously been developed and verified under NASA Langley and NASA Johnson sponsorship as part of a viscous shock layer entry vehicle flowfield code. The secondary objectives were: (1) to investigate the necessity of including the radiative flux term in the vibrational-electron-electronic (VEE) energy equation as well as in the global energy equation, (2) to determine the importance of including the small net change in electronic energy between products and reactants which occurs during a chemical reaction, and (3) to study the effect of atom-atom impact ionization reactions on entry vehicle nonequilibrium flowfield chemistry and radiation. For each, of these objectives, it was assumed that the code would be applicable to lunar return entry conditions, i.e. altitude above 75 km, velocity greater, than 11 km/sec, where nonequilibrium chemistry and radiative heating phenomena would be significant. In addition, it was tacitly assumed that as part of the project the code would be applied to a variety of flight conditions and geometries.

Carlson, Leland A.↗
NASA NTRS2001

Low Energy Electrons in the Mars Plasma Environment

The ionosphere of Mars is rather poorly understood. The only direct measurements were performed by the Viking 1 and 2 landers in 1976, both of which carried a Retarding Potential Analyzer. The RPA was designed to measure ion properties during the descent, although electron fluxes were estimated from changes in the ion currents. Using these derived low-energy electron fluxes, Mantas and Hanson studied the photoelectron and the solar wind electron interactions with the atmosphere and ionosphere of Mars. Unanswered questions remain regarding the origin of the low-energy electron fluxes in the vicinity of the Mars plasma boundary. Crider, in an analysis of Mars Global Surveyor Magnetometer/Electron Reflectometer measurements, has attributed the formation of the magnetic pile-up boundary to electron impact ionization of exospheric neutral species by solar wind electrons. However, the role of photoelectrons escaping from the lower ionosphere was not determined. In the proposed work, we will examine the role of solar wind and ionospheric photoelectrons in producing ionization in the upper ionosphere of Mars. Low-energy (< 4 keV) electrons will be modeled using the two-stream electron transport code of Link. The code models both external (solar wind) and internal (photoelectron) sources of ionization, and accounts for Auger electron production. The code will be used to analyze Mars Global Surveyor measurements of solar wind and photoelectrons down to altitudes below 200 km in the Mars ionosphere, in order to determine the relative roles of solar wind and escaping photoelectrons in maintaining plasma densities in the region of the Mars plasma boundary.

Link, Richard↗
NASA NTRS2000

Mass Spectrometric and Langmuir Probe Measurements in Inductively Coupled Plasmas in Ar, CHF3/Ar and CHF3/Ar/O2 Mixtures

Absolute fluxes and energy distributions of ions in inductively coupled plasmas of Ar, CHF3/Ar, and CHF3/Ar/O2 have been measured. These plasmas were generated in a Gaseous Electronics Conference (GEC) cell modified for inductive coupling at pressures 10-50 mTorr and 100-300 W of 13.56 MHz radio frequency (RF) power in various feedgas mixtures. In pure Ar plasmas, the Ar(+) flux increases linearly with pressure as well as RF-power. Total ion flux in CHF3 mixtures decreases with increase in pressure and also CHF3 concentration. Relative ion fluxes observed in the present studies are analyzed with the help of available cross sections for electron impact ionization and charge-exchange ion-molecule reactions. Measurements of plasma potential, electron and ion number densities, electron energy distribution function, and mean electron energy have also been made in the center of the plasma with a RF compensated Langmuir probe. Plasma potential values are compared with the mean ion energies determined from the measured ion energy distributions and are consistent. Electron temperature, plasma potential, and mean ion energy vary inversely with pressure, but increase with CHF3 content in the mixture.

Kim, J. S.↗