Search NASA⌕ Search

SEARCH · Search NASA

Results for “interaction potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Unsteady Flow Field in a Multistage Axial Flow Compressor

The flow field in a multistage compressor is three-dimensional, unsteady, and turbulent with substantial viscous effects. Some of the specific phenomena that has eluded designers include the effects of rotor-stator and rotor-rotor interactions and the physics of mixing of velocity, pressure, temperature and velocity fields. An attempt was made, to resolve experimentally, the unsteady pressure and temperature fields downstream of the second stator of a multistage axial flow compressor which will provide information on rotor-stator interaction effects and the nature of the unsteadiness in an embedded stator of a three stage axial flow compressor. Detailed area traverse measurements using pneumatic five hole probe, thermocouple probe, semi-conductor total pressure probe (Kulite) and an aspirating probe downstream of the second stator were conducted at the peak efficiency operating condition. The unsteady data was then reduced through an ensemble averaging technique which splits the signal into deterministic and unresolved components. Auto and cross correlation techniques were used to correlate the deterministic total temperature and velocity components (acquired using a slanted hot-film probe at the same measurement locations) and the gradients, distributions and relative weights of each of the terms of the average passage equation were then determined. Based on these measurements it was observed that the stator wakes, hub leakage flow region, casing endwall suction surface corner region, and the casing endwall region away from the blade surfaces were the regions of highest losses in total pressure, lowest efficiency and highest levels of unresolved unsteadiness. The deterministic unsteadiness was found to be high in the hub and casing endwall regions as well as on the pressure side of the stator wake. The spectral distribution of hot-wire and kulite voltages shows that at least eight harmonics of all three rotor blade passing frequencies are present at this measurement location. In addition to the basic three rotor blade passing frequencies (R1, R2 and R3) and their harmonics, various difference frequencies such as (2R1 -R2) and (2R3-R2) and their harmonics are also observed. These difference frequencies are due to viscous and potential interactions between rotors 1, 2 and 3 which are sensed by both the total pressure and aspirating probes at this location. Significant changes occur to the stator exit flow features with passage of the rotor upstream of the stator. Because of higher convection speeds of the rotor wake on the suction surface of the downstream stator than on the pressure side, the chopped rotor wake was found to be arriving at different times on either side of the stator wake. As the rotor passes across the stator.

Suryavamshi, N.↗
NASA NTRS2021

A Computational Analysis of Boundary Layer Instability over the BOLT Configuration

The complex boundary layer flow over the BOLT flight configuration is known to exhibit multiple and potentially interacting instability mechanisms. This paper represents a continuation of our numerical investigation of the flow instabilities over the main test surface of the BOLT configuration by using state-of-the-art tools in multidimensional instability analysis. Specifically, the paper extends our previous computations by considering the separate effects of a nonzero angle of attack and a nonzero yaw on the modal instability characteristics of the boundary layer streaks adjacent to the minor-axis symmetry plane, specifically near both ends of the azimuthal region of a thick boundary layer in the middle, where this region rapidly changes to a thinner boundary layer on either side. At the t = 28.8767 s condition from the ascent part of the anticipated flight trajectory with a flight Mach number of M ∞ = 5.53 and unit Reynolds number of 4.25 x 10 6 /m, either type of departure from the design condition is shown to have a considerable impact on the structure of the basic state rollup within the region of interest and, hence, also on the amplification characteristics of instability waves within the resulting streaks. Yet, for a yaw angle of β = 4 degrees, the computations indicate only a slight reduction with respect to the peak N-factor of nearly 11 at the design condition of zero degrees yaw and zero degrees angle of attack. In contrast, an angle of attack equal to α = 4 degrees, the peak N-factor decreases to nearly 6 on the leeward side and increases above 16 on the windward side, making the onset of transition highly likely on the windward side. Computations also highlight the role of streak instabilities that originate as Mack mode disturbances and also demonstrate the potential pitfalls in using surface pressure sensors alone to gauge the magnitude of instability amplification.

Boundary layer transition↗
NASA NTRS2021

A Computational Analysis of Boundary Layer Instability over the BOLT Configuration (Effect of Nonzero AoA and Yaw)

The complex boundary layer flow over the BOLT flight configuration is known to exhibit multiple and potentially interacting instability mechanisms. This paper represents a continuation of our numerical investigation of the flow instabilities over the main test surface of the BOLT configuration by using state-of-the-art tools in multidimensional instability analysis. Specifically, the paper extends our previous computations by considering the separate effects of a nonzero angle of attack and a nonzero yaw on the modal instability characteristics of the boundary layer streaks adjacent to the minor-axis symmetry plane, specifically near both ends of the azimuthal region of a thick boundary layer in the middle, where this region rapidly changes to a thinner boundary layer on either side. At the t = 28.8767 s condition from the ascent part of the anticipated flight trajectory with a flight Mach number of M ∞ = 5.53 and unit Reynolds number of 4.25 x 10 6 /m, either type of departure from the design condition is shown to have a considerable impact on the structure of the basic state rollup within the region of interest and, hence, also on the amplification characteristics of instability waves within the resulting streaks. Yet, for a yaw angle of β = 4 degrees, the computations indicate only a slight reduction with respect to the peak N-factor of nearly 11 at the design condition of zero degrees yaw and zero degrees angle of attack. In contrast, an angle of attack equal to α = 4 degrees, the peak N-factor decreases to nearly 6 on the leeward side and increases above 16 on the windward side, making the onset of transition highly likely on the windward side. Computations also highlight the role of streak instabilities that originate as Mack mode disturbances and also demonstrate the potential pitfalls in using surface pressure sensors alone to gauge the magnitude of instability amplification.

Boundary layer transition↗
DOE OSTI2022

Driven superconducting vortex dynamics in systems with twofold anisotropy in the presence of pinning

Abstract We examine the dynamics of superconducting vortices with twofold anisotropic interaction potentials driven over random pinning, and compare the behavior under drives applied along the hard and the soft anisotropy directions. As the driving force increases, the number of topological defects reaches a maximum near the depinning threshold, and then decreases as the vortices form one-dimensional (1D) chains. This coincides with a transition from a pinned nematic to a moving smectic aligned with the soft anisotropy direction. The system is generally more ordered when the drive is applied along the soft direction of the anisotropy. For driving along the hard direction, there is a critical value of the twofold anisotropy above which the system remains aligned with the soft direction. Hysteretic behavior appears upon cycling the driving force, with 1D vortex chains persisting during the decreasing leg below the threshold for chain formation for increasing drive. More anisotropic systems have a greater amount of structural disorder in the moving state. For lower anisotropy, the system forms a moving smectic-A state, while at higher anisotropy, a moving nematic state appears instead.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Covalent labeling of the Arabidopsis plasma membrane H + ‐ ATPase reveals 3D conformational changes involving the C‐terminal regulatory domain

The plasma membrane proton pump is the primary energy transducing, electrogenic ion pump of the plasma membrane in plants and fungi. Compared to its fungal counterpart, the plant plasma membrane proton pump's regulatory C‐terminal domain (CTD) contains an additional regulatory segment that links multiple sensory pathways regulating plant cell length through phosphorylation and recruitment of regulatory 14‐3‐3 proteins. However, a complete structural model of a plant proton pump is lacking. Here, we performed covalent labeling with mass spectrometric analysis (CL‐MS) on the Arabidopsis pump AHA2 to identify potential interactions between the CTD and the catalytic domains. Our results suggest that autoinhibition in the plant enzyme is much more structurally complex than in the fungal enzyme.

Blackburn, Matthew R. [Department of Biochemistry ↗
DOE OSTI2020

Irrigation, carbon amelioration, nitrogen, and stover removal effects on continuous corn

Corn (Zea mays L.) residue or stover is harvested as supplemental feed for livestock and is a potential feedstock for cellulosic biofuels. Limited information is available on corn stover removal effects on grain yield under different irrigation rates, nitrogen (N) fertilizer rates, and practices to maintain soil carbon (C) and minimize soil erosion. Here, we evaluated potential interactions between irrigation rate (full or limited), C amelioration practices (cover crop, surface-applied manure, or no amelioration practice), fertilizer N management (125 or 200 kg N ha –1 ), and stover removal (residue removal or no residue removal), on no-till continuous corn grain yield located on a silt loam soil in south-central Nebraska (2011–2018). Stover removal increased (P = .0017) grain yield by 1.02 Mg ha –1 and grain N uptake compared with no stover removal. Manure increased corn grain yield by 899 kg ha –1 compared to either the control or cover crop with stover removal while C amelioration practices did not affect grain yield under stover retention. Grain N concentration was higher (P < .0001) with stover removal (13.2 g kg –1 ) than residue retained (12.7 g kg –1 ). Partial factor productivity (grain yield/N rate) was highest for manure treatments with residue removal. The farmgate N balance (N applied – N removed) from stover removal was negative, yet grain yield was not affected after eight growing seasons. Grain yield increased with stover removal and manure application resulting in a cost-effective C amelioration practice whereas incorporating a winter cover crop resulted in similar grain yield as the control.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Analysis of Dynamical Peculiarities in Nanoalloys at Subsystems Level: Dynamical Degrees of Freedom, Temperature Differences, and the Chameleon Effect

Abstract A novel analysis of the dynamical behavior of nanoalloy systems, as represented by model Ni/Al 13‐atom clusters, over a broad range of energies that cover the stage‐wise transition of the systems from their solid‐like to liquid‐like state is presented. Conceptually, the analysis is rooted in partitioning the systems into judiciously chosen subsystems and characterizing the latter in terms of subsystem‐specific dynamical descriptors that include dynamical degrees of freedom , root‐mean‐square bond‐length fluctuation , and element‐specific subsystem temperature . The analysis reveals a host of intriguing new peculiarities in the dynamical behavior of the Ni/Al 13‐mers, among which are what we call the chameleon effect and the difference in the temperatures of the Ni and Al subsystems at high energies, a difference that strongly depends on the cluster composition and also changes with energy. These do not have an analog in pure Ni 13 and Al 13 and are explained in terms of the coupled effects of the difference between the masses of the Ni and Al atoms (the mass effect) and of the difference in the anharmonicity of the overall interaction potential as experienced by the Ni and Al subsystems of the clusters (the potential effect).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Measurement of temperature of a dusty plasma from its configuration

A new concept called “configurational temperature” is introduced in the context of dusty plasma, where the temperature of the dust particles submerged in the plasma can be measured directly from the positional information of the individual dust particles and the interaction potential between the dust grains. This method does not require the velocity information of individual particles, which is a key parameter to measure the dust temperature in the conventional method. The technique is initially tested using two-dimensional (2D) OpenMP parallel molecular dynamics and Monte Carlo simulation and then compared with the temperature evaluated from experimental data. The experiment have been carried out in the Dusty Plasma Experimental (DPEx) device, where a 2D stationary plasma crystal of melamine formaldehyde particles is formed in the cathode sheath of a DC glow discharge argon plasma. The kinetic temperature of the dust is calculated using the standard particle image velocimetry technique at different pressures. An extended simulation result for the three-dimensional case is also presented, which can be employed for the temperature measurement of a three-dimensional dust crystal in laboratory devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

How Fisheries Biologists Can Facilitate the Clean Energy Transition

Abstract Fisheries and aquatic biologists play a critical role in creating environmentally protective hydropower flow requirements that govern flow timing, frequency, magnitude, and rate of change. Hydropower's role in the U.S. electrical grid is expected to evolve in response to increased wind and solar generation as hydropower will be called upon to quickly ramp up and down in response to changes in wind and solar generation. For this reason, hydropower is expected to have increased value as fossil generation is phased out, even as rapid flow fluctuations linked with hydropower flexibility may strand fish, alter habitat, and create unsafe recreational conditions. We face a new challenge in facilitating the renewable energy transition—designing environmental flow requirements that protect against the impacts of flow fluctuations while allowing adequate hydropower flexibility to support a stable grid. In this paper, we discuss hydropower environmental flow requirements, operational flexibility, and electrical grid stability, their potential interactions, and opportunities to align environmental and power system needs to support healthy ecosystems, multiple water uses, and decarbonization of the electric grid.

13 HYDRO ENERGY↗
DOE OSTI2025

Integrated structural model of the palladin–actin complex using XL ‐ MS , docking, NMR , and SAXS

Abstract Palladin is an actin‐binding protein that accelerates actin polymerization and is linked to the metastasis of several types of cancer. Previously, three lysine residues in an immunoglobulin‐like domain of palladin have been identified as essential for actin binding. However, it is still unknown where palladin binds to F‐actin. Evidence that palladin binds to the sides of actin filaments to facilitate branching is supported by our previous study showing that palladin was able to compensate for Arp2/3 in the formation of Listeria actin comet tails. Here, we used chemical crosslinking to covalently link palladin and F‐actin residues based on spatial proximity. Samples were then enzymatically digested, separated by liquid chromatography, and analyzed by tandem mass spectrometry. Peptides containing the crosslinks and specific residues involved were then identified for input to the HADDOCK docking server to model the most likely binding conformation. Small‐angle x‐ray scattering was used to provide further insight into palladin flexibility and the binding interface, and NMR spectra identified potential interactions between palladin's Ig domains. Our final structural model of the F‐actin:palladin complex revealed how palladin interacts with and stabilizes F‐actin at the interface between two actin monomers. Three actin residues that were identified in this study also appear commonly in the actin‐binding interface with other proteins such as myotilin, myosin, and tropomodulin. An accurate structural representation of the complex between palladin and actin extends our understanding of palladin's role in promoting cancer metastasis through the regulation of actin dynamics.

Sargent, Rachel [Department of Chemistry and Bioch↗
DOE OSTI2022

$T\overline{T}$ deformations and the width of fundamental particles

We provide a simple geometric meaning for deformations of so-called $T\overline{T}$ type in relativistic and non-relativistic systems. Deformations by the cross products of energy and momentum currents in integrable quantum field theories are known to modify the thermodynamic Bethe ansatz equations by a “CDD factor”. In turn, CDD factors may be interpreted as additional, fixed shifts incurred in scattering processes: a finite width added to the fundamental particles (or, if negative, to the free space between them). We suggest that this physical effect is a universal way of understanding $T\overline{T}$ deformations, both in classical and quantum systems. We first show this in non-relativistic systems, with particle conservation and translation invariance, using the deformation formed out of the densities and currents of particles and momentum. This holds at the level of the equations of motion, and for any interaction potential, integrable or not. We then argue, and show by similar techniques in free relativistic particle systems, that $T\overline{T}$ deformations of relativistic systems produce the equivalent phenomenon, accounting for length contractions. We also show that, in both the relativistic and non-relativistic cases, the width of particles is equivalent to a state-dependent change of metric, where the distance function discounts the particles’ widths, or counts the additional free space. This generalises and explains the known field-dependent coordinate change describing $T\overline{T}$ deformations. The results connect such deformations with generalised hydrodynamics, where the relations between scattering shifts, widths of particles and state-dependent changes of metric have been established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Noncommutative gauge symmetry in the fractional quantum Hall effect

Abstract We show that a system of particles on the lowest Landau level can be coupled to a probe U(1) gauge field$$ \mathcal{A} $$ A μ in such a way that the theory is invariant under a noncommutative U(1) gauge symmetry. While the temporal component$$ \mathcal{A} $$ A 0 of the probe field is coupled to the projected density operator, the spatial components$$ \mathcal{A} $$ A i are best interpreted as quantum displacements, which distort the interaction potential between the particles. We develop a Seiberg-Witten-type map from the noncommutative U(1) gauge symmetry to a simpler version, which we call “baby noncommutative” gauge symmetry, where the Moyal brackets are replaced by the Poisson brackets. The latter symmetry group is isomorphic to the group of volume preserving diffeomorphisms. By using this map, we resolve the apparent contradiction between the noncommutative gauge symmetry, on the one hand, and the particle-hole symmetry of the half-filled Landau level and the presence of the mixed Chern-Simons terms in the effective Lagrangian of the fractional quantum Hall states, on the other hand. We outline the general procedure which can be used to write down effective field theories which respect the noncommutative U(1) symmetry.

Physics↗
DOE OSTI2022

Tea consumption and risk of bladder cancer in the Bladder Cancer Epidemiology and Nutritional Determinants (BLEND) Study: Pooled analysis of 12 international cohort studies

Tea has been shown to be associated with reduced risk of several diseases including cardiovascular diseases, stroke, metabolic syndrome, and obesity. However, the results on the relationship between tea consumption and bladder cancer are conflicting. This research aimed to assess the association between tea consumption and risk of bladder cancer using a pooled analysis of prospective cohort data. Individual data from 532,949 participants in 12 cohort studies, were pooled for analyses. Cox regression models stratified by study centre was used to estimate hazard ratios (HR) and corresponding 95% CIs. Fractional polynomial regression models were used to examine the dose–response relationship. A higher level of tea consumption was associated with lower risk of bladder cancer incidence (compared with no tea consumption: HR = 0.87, 95% C.I. = 0.77–0.98 for low consumption; HR = 0.86, 95% C.I. = 0.77–0.96 for moderate consumption; HR = 0.84, 95% C.I. = 0.75–0.95 for high consumption). When stratified by sex and smoking status, this reduced risk was statistically significant among men and current and former smokers. In addition, dose–response analyses showed a lower bladder cancer risk with increment of 100 ml of tea consumption per day (HR-increment = 0.97; 95% CI = 0.96–0.98). A similar inverse association was found among males, current and former smokers while never smokers and females showed non-significant results, suggesting potential sex-dependent effect. Higher consumption of tea is associated with reduced risk of bladder cancer with potential interaction with sex and smoking status. Further studies are needed to clarify the mechanisms for a protective effect of tea (e.g. inhibition of the survival and proliferation of cancer cells and anti-inflammatory mechanisms) and its interaction with smoking and sex.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Unexpected Conformational Behavior of Poly(poly(ethylene glycol) methacrylate)-Poly(propylene carbonate)-Poly(poly(ethylene glycol) methacrylate) (PPEGMA-PPC-PPEGMA) Amphiphilic Block Copolymers in Micellar Solution and at the Air-Water Interface

Self-assemblies (bulk micelles and Langmuir monolayers) of a new amphiphilic block copolymer, poly(poly(ethylene glycol) methacrylate)-poly(propylene carbonate)-poly(poly(ethylene glycol) methacrylate) (PPEGMA-PPC-PPEGMA), were investigated in dilute aqueous solution and at the air-water interface. An important feature that distinguishes PPEGMA-PPC-PPEGMA from conventional linear PEG-based polymer surfactants is that in the hydrophilic PPEGMA block the PEG moieties exist as side chains attached to the poly(methacrylate) (PMA) backbone. This study was performed using three PPEGMA-PPC-PPEGMA samples having an identical PPC molecular weight (5.6 kDa) and different PPEGMA molecular weights (7.3, 2.8 and 2.1 kDa on either side) (named as “G7C6G7”, “G3C5G3”, and “G2C6G2”, respectively). Cryo-TEM images revealed that G2C6G2 micelles form large clusters, whereas G7C6G7 micelles exist as unimers; the behavior of G3C6G3 is intermediate. The average core surface distance between two adjacent G2C6G2 micelles in a cluster was estimated to be only about 3.7 nm, which suggests that in the micelle corona layer only the PEG side chains (but not the PMA backbone) exist as hydrated brush chains. A calculation showed that at the small micelle separation distance observed, the van der Waals attractive forces become significant, and are thus likely responsible for the cluster formation. Steady shear rheometry measurements confirmed that G2C6G2 micelles are indeed only weakly bound in clusters, and these micelle clusters are thus prone to breakup even under mild steady shear. The micelle breakup force estimated from the shear viscosity data is in reasonable agreement with an estimate obtained from the theoretical van der Waals interaction potential. Langmuir monolayers formed at the air-water interface by PPEGMA-PPC-PPEGMA were also characterized; surface pressure-area measurements were performed. Detailed features of the surface pressure-area isotherms further supported that only the PEG side chains are hydrated in the subphase, while the PMA backbone remains unhydrated and situated on the water surface.

Lee, Jaewon↗
DOE OSTI2023

Scalable simulation of coupled adsorption and transport of methane in confined complex porous media with density preconditioning

The growing significance of shales and tight formations in the transition to less carbon-intensive and clean energy drives the research endeavor to understand the physics of gas flow within these systems. However, shales are composed of massively heterogeneous physical and chemical features. Most nano-sized pores connect to millimeter-scale fractures, leading to multiscale transport. These nano-scale pore throats demonstrate non-classical flow behavior, such as non-negligible slip velocities and adsorbed gas layers at the boundary. As a result, classical computational fluid dynamics models do not capture the physics. In this work, we develop a coupling scheme for the multiple-relaxation-time (MRT) lattice Boltzmann (LB) method that integrates the Peng-Robinson equation of state into a pseudo-potential interaction model to capture the physics of methane flow in irregular networks of channels that represent nano-scale porous media. We use atomistic simulations to calibrate and validate our model in slit nano-channels. We propose a preconditioning scheme to initialize the coupled transport and adsorption simulation of methane in complex porous media. The results of this implementation of LB agree with Direct Simulation Monte Carlo (DSMC) and Molecular Dynamics (MD) simulations. We then scale up the LB implementation through vectorization and indirect addressing. We parallelize it using Message Passing Interface (MPI) and OpenMP frameworks to simulate transport and adsorption in complex media with a million lattices. Additionally, we analyze the differences between coupled and transport-only simulations in two case studies and show that considering phase behavior, i.e., adsorption, can significantly change the flow behavior. This work constitutes an important step towards bridging the gap between molecular flow and system-scale behavior of complex disordered porous media.

42 ENGINEERING↗
DOE OSTI2020

Patchy particle model of hydrated amorphous silica

Glasses corroded in static aqueous conditions typically reach a slow, residual rate of dissolution as a result of the complex interplay between multiple processes. While intrinsically suited to address this problem, Monte Carlo (MC) models developed to date have relied on lattices to describe the amorphous structure of glass and are thus unable to reproduce the residual rate of glass corrosion. A recently developed MC approach based on amorphous structures derived from molecular dynamics simulations offers a solution [Kerisit and Du J. Non-Cryst. Solids 522 (2019) 119601], but it requires a simple model that can rapidly relax the glass-water interface upon each dissolution/condensation event to retain the ability of MC simulations to reach large spatial and temporal scales. To this end, a patchy particle model of hydrated amorphous silica was developed and evaluated against atomistic simulations in this work. Models of water and amorphous silica were first developed separately, and cross terms were then defined to enable simulations of hydrated amorphous silica structures with varying water content. While the nature of its interaction potential prevents the patchy particle model from reproducing simultaneously the structure and dynamics of the systems of interest with a single set of parameters, it described well the connectivity of hydrated amorphous silica structures and the local coordination geometry of individual species. Therefore, this model opens the door to MC simulations of the residual rate of glass corrosion and offers an alternative to atomistic models to investigate the evolution of silica gels over large spatial and temporal scales.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Neutron diffraction discriminates between models for the nanoarchitecture of graphene sheets in glassy carbon

Glassy carbon is a chemically inert, biocompatible, disordered material with the graphene sheet as its basic building block. Structural characterisation techniques have so far been unable to provide definitive distinction between the many proposed models for its structure. Computer based simulation methods have made a step forward by predicting structure from interaction potentials, but the results are sensitive to the choice of the potential. Here we use the white neutron beam of the Spallation Neutron Source at Oak Ridge National Laboratory coupled with the SNAP time-of-flight diffractometer to sample the reciprocal space of glassy carbon and calculate accurate radial distribution functions. From the radial distribution information, we determine graphene sheet dimensions, registration, curvature, and assess defect content to rank the proposed structures in terms of their agreement with experimental data. In this work, we find that the recent models derived from empirical potentials give the best agreement.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Kaon–proton strong interaction at low relative momentum via femtoscopy in Pb–Pb collisions at the LHC

In quantum scattering processes between two particles, aspects characterizing the strong and Coulomb forces can be observed in kinematic distributions of the particle pairs. The sensitivity to the interaction potential reaches a maximum at low relative momentum and vanishing distance between the two particles. Ultrarelativistic heavy-ion collisions at the LHC provide an abundant source of many hadron species and can be employed as a measurement method of scattering parameters that is complementary to scattering experiments. This study confirms that momentum correlations of particles produced in Pb–Pb collisions at the LHC provide an accurate measurement of kaon–proton scattering parameters at low relative momentum, allowing precise access to the K – p $\rightarrow$ K – p process. This work also validates the femtoscopic measurement in ultrarelativistic heavy-ion collisions as an alternative to scattering experiments and a complementary tool to the study of exotic atoms with comparable precision. In this work, the first femtoscopic measurement of momentum correlations of K – p (K + $\bar{p}$) and K + p (K – $\bar{p}$) pairs in Pb–Pb collisions at centre-of-mass energy per nucleon pair of $\sqrt{s_{NN}}$ =5.02 TeV registered by the ALICE experiment is reported. The components of the K – p complex scattering length are extracted and found to be $\mathfrak{R}$f 0 = -0.91±0.03(stat)$^{+0.17}_{-0.03}$(syst) and $\mathfrak{T}$f 0 =0.92±0.05(stat)$^{+0.12}_{-0.33}$(syst). The results are compared with chiral effective field theory predictions as well as with existing data from dedicated scattering and exotic kaonic atom experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗